Author Topic: [MO] The Geekhack Spring for switch modding (~50g) (Read 14637 times)

turbocharged · « **Reply #120 on:** Thu, 13 January 2011, 13:51:40 »

Reduce me to just one set please. Thanks.

urlwolf · « **Reply #121 on:** Fri, 14 January 2011, 10:29:24 »

Do we have a new estimate on when the MO will be ready?
Is it still last week of Jan?
Thanks!

J888www · « **Reply #122 on:** Wed, 19 January 2011, 09:05:30 »

Quote from: sixty;275621

.......once everything is settled you will not have any extra noise nor squeaky parts

When you are happy with the final result of the product, I would like to place an order for 1-Set.

TYVM.

bifi85 · « **Reply #123 on:** Sat, 22 January 2011, 14:08:47 »

I think i will buy 1 set, but i am looking for the result before.

Can i switch the spring on a steelseries 6Gv2 without desoldering the switches?

RiGS · « **Reply #124 on:** Sat, 22 January 2011, 17:09:22 »

Desoldering the switches is not a big deal.

bifi85 · « **Reply #125 on:** Sun, 23 January 2011, 07:40:13 »

And when i resolder the switches, they are close as before? Take i any bad consequence about desoldering?

Findecanor · « **Reply #126 on:** Sun, 23 January 2011, 08:00:35 »

There are more opportunities to screw up with a soldering iron than without one ...

sixty · « **Reply #127 on:** Sun, 23 January 2011, 08:46:33 »

Please note that this is currently on hold. I do not know when the springs will be ready for actual production. Once the time comes I will PM everyone on the list to confirm their order again. Price may go up or down a bit depending on how many people actually still will buy at that point of time.

Again, I apologize for this chaotic mass order. Thanks for your patience.

J888www · « **Reply #128 on:** Sun, 23 January 2011, 09:32:42 »

Fine
[youtube]3o0ExGXfs2o[/youtube]

roads · « **Reply #129 on:** Sun, 23 January 2011, 23:06:00 »

An idea would be to take an Xray of the key when pressed at your local dentist. So you can see if the spring works correctly inside and maybe find out where the noise comes from. Those pictures would be cool.

HaaTa · « **Reply #130 on:** Sun, 23 January 2011, 23:08:07 »

What ever happened to that dentist we had around here for a while...

roads · « **Reply #131 on:** Mon, 24 January 2011, 10:34:09 »

Is the spring squeaking outside the switch also or only when its in the switch?

sixty · « **Reply #132 on:** Mon, 24 January 2011, 10:37:20 »

outside too. its a material error and the spring guys confirmed this pretty much. basically it sounds just like those springs you would find in a ballpen.

roads · « **Reply #133 on:** Mon, 24 January 2011, 11:16:07 »

So right now they are waiting to get new material to bend them again and you are waiting for the new prototypes? Any ETA from their side?

sixty · « **Reply #134 on:** Mon, 24 January 2011, 11:31:44 »

They just started production again this week. They had been out of business since Christmas till now. I'll update the thread with a new ETA as soon as I hear anything. And yep, waiting for a new sample to see if it meets my standards now.

roads · « **Reply #135 on:** Mon, 24 January 2011, 11:42:31 »

K thanks for the heads up. Can you please update the order list, I am so afraid to be left out. For me "Squeeky" was great coincidence...

Moogle Stiltzkin · « **Reply #136 on:** Mon, 24 January 2011, 14:43:50 »

Sixty place me down for 1 set of springs + 1 tool to open the switch.

I just recently ordered a cherry mx black g80-1295 HAU.

If i don't like the blacks, i want to ghetto red mod it with your springs.

It seems like an easily reversible process, and something even i could do assuming the method will be something like this video.

http://geekhack.org/showwiki.php?title=Island:12790

But you mentioned 2 pronged, so i am guessing easier than that ?

roads · « **Reply #137 on:** Sat, 29 January 2011, 12:04:47 »

Any news?

sixty · « **Reply #138 on:** Sun, 30 January 2011, 10:46:26 »

No news yet from their part. I am currently very busy with other keyboard related projects, so I am slacking a bit too. I'll be nudging them sometime this week if I don't hear from them until then.

Moogle Stiltzkin · « **Reply #139 on:** Mon, 31 January 2011, 16:05:39 »

No problem. Take your time.

I'm also still waiting on my keyboard to arrive.

roads · « **Reply #140 on:** Sun, 06 February 2011, 06:20:15 »

Just sending out my weekly probe, any answer from them?

roads · « **Reply #141 on:** Sun, 20 February 2011, 14:30:57 »

Still nothing? would be so cool to get these..

roads · « **Reply #142 on:** Sat, 12 March 2011, 01:54:38 »

Any news sixty? Is this great idea of yours dead?

db_Iodine · « **Reply #143 on:** Sat, 12 March 2011, 02:43:22 »

Quote from: roads;310306

Any news sixty? Is this great idea of yours dead?

You can find sixty mostly on deskthority these days. I think this group buy is basically dead, but you could always ask sixty.

turbocharged · « **Reply #144 on:** Thu, 17 March 2011, 20:25:18 »

Only problem now is that red switches are becoming more available, so the GB seems less useful now.

RiGS · « **Reply #145 on:** Thu, 17 March 2011, 20:30:21 »

Quote from: ripster;313662

Like I have posted multiple times if the design goal was a slightly stiffer Red Cherry I'd be interested. But a supposedly "smoother" blue/brown cherry seemed a bit nebulous.

I agree on that. 65g springs would be just about perfect.

himynameisbunny · « **Reply #146 on:** Wed, 22 June 2011, 09:09:44 »

This spring still has a use - I believe it would be right at home in a variable weighted Ergo Clear mod.

I'll PM Sixty and see if I can do anything with the information he's nabbed.

Sent from my Vega using Tapatalk

himynameisbunny · « **Reply #147 on:** Wed, 22 June 2011, 09:59:56 »

Quote from: ripster;365214

I think the design goal should be a spring lighter than a Blue/Brown/Red spring. A "smoother" spring seems a bit touchy feely for me.

Agreed, but how light would you want to go? Lots of people complain about ;;;;;;;;;;;;;; and aaaaaaaaaaa with the 35g switches in their topres.

Having said that, I think that everybody would go mental over some 35g (if put in browns or reds) springs. Would make blues and ergo clear lites 40g each which would be interesting.

eyesnine · « **Reply #148 on:** Fri, 24 June 2011, 07:46:00 »

I'm definitely interested. Post back here when you get the details.

I did a quick google and there appears to be a number of different sources online. It may be easier to send samples of MX brown springs to some of these companies and get estimates for cloning the spring, rather than designing a new one.

Also, I think that it's likely that someone already has a large stock of springs of suitable specifications already. The springs seem to be a standard size - it's just a matter of finding the right supplier.

eyesnine · « **Reply #149 on:** Fri, 24 June 2011, 07:50:44 »

If the spring is to be lighter, I don't think it should be lighter by much. It is possible to cut down MX brown springs to make them lighter. The problem is that an expensive keyboard needs to be sacrificed to do this.

News:

Author Topic: [MO] The Geekhack Spring for switch modding (~50g) (Read 14637 times)