Author Topic: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time  (Read 363901 times)

0 Members and 1 Guest are viewing this topic.

Offline brighenne

  • Posts: 276
  • Location: Long Beach, CA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1950 on: Mon, 15 April 2013, 22:52:07 »
brighenne:  what keyboard is that?  looks really good with the new set

It's a filco in a grey vortex case.

Offline Saturn

  • Posts: 130
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1951 on: Mon, 15 April 2013, 23:10:49 »
Don't worry, these keycaps are so awesome, upon seeing them, sharks will carry them to land, whereupon a Mongoose will deliver them to your door.

they arrived today
i thought you were kidding about the mongoose thing, holy ****

great job tj, hope paypal isn't still giving you a hard time

Offline yellertoof

  • Posts: 5
  • Location: United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1952 on: Mon, 15 April 2013, 23:23:29 »
Keys arrived and they look awesome....but.... I ordered 2 sets and only received 1 : (

Offline megaforce

  • Posts: 1087
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1953 on: Mon, 15 April 2013, 23:41:33 »
Thanks for the awesome GB, TJ!
Corsair K63 Wireless | Razer Huntsman Elite
More
Hokusai | Ogre| Yohane | Mc65 | Kaze | RBB
Former: LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | HHKB JP x JS HiPro | 910 CE |Nunu |Nunu FE | Jane V2 CE|Jane V2| RS (TKL)


Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1954 on: Mon, 15 April 2013, 23:57:51 »
Keys arrived and they look awesome....but.... I ordered 2 sets and only received 1 : (

And that's all you'll get.

Until the addendum package arrives at your address later this week.  Sorry for the mistake.

Offline yellertoof

  • Posts: 5
  • Location: United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1955 on: Tue, 16 April 2013, 00:09:43 »
Keys arrived and they look awesome....but.... I ordered 2 sets and only received 1 : (

And that's all you'll get.

Until the addendum package arrives at your address later this week.  Sorry for the mistake.

No worries.  I'm really glad I bought the 17 key because it looks fantastic.  You're the man, TJ.

Offline beauthegamer

  • Posts: 26
  • Location: Washington, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1956 on: Tue, 16 April 2013, 02:18:36 »
Got my set in the mail today as well. Might as well add to the potato pics!
18938-0
Thanks again tj! The set is awesome!
Filco Majestouch 2 Ninja with wood blue case and reds | HHKB Pro II non-printed black | Phantom with ergo clears

Offline Delvaei

  • Posts: 3
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1957 on: Tue, 16 April 2013, 03:50:53 »
Received mine, thanks. :)

Offline Patchwrks

  • Posts: 170
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1958 on: Tue, 16 April 2013, 04:02:30 »
Does anybody else almost not want to use the set because it looks so good?
(´・ω・`)denko-chan~~~내 스레드

Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1959 on: Tue, 16 April 2013, 04:18:31 »
Does anybody else almost not want to use the set because it looks so good?

you have me. :)
- WTB/WTT - Cotton Candy Brobot V2

Offline Joxx

  • Posts: 64
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1960 on: Tue, 16 April 2013, 04:36:18 »
If anyone is reselling their red on white  :p
Ducky 9087 MX Brown | Blackwidow  MX Blue  | CM TK MX Red | Looking for a QFR MX Blue!

Offline Muffet

  • Posts: 55
  • Location: Marquette, MI
  • Man of many paths
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1961 on: Tue, 16 April 2013, 06:05:11 »
I believe round 2 needs to happen  :))

     Painted QFR    Cherry ML for Work

Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1962 on: Tue, 16 April 2013, 10:19:57 »
Keys arrived and they look awesome....but.... I ordered 2 sets and only received 1 : (

And that's all you'll get.

Until the addendum package arrives at your address later this week.  Sorry for the mistake.

Me too?

 - Ron I samwisekoi
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline gbohn

  • Posts: 105
  • Location: New York State, United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1963 on: Tue, 16 April 2013, 18:32:28 »
  I received mine. Thanks T.J.

 Unfortunately I'm seeing some 'bleed-through' on my White-On Red modifiers  :(. It looks like the White plastic underneath is showing though the red resulting in color variations.

  Is this how they all are, or am I just 'lucky'?  I got this the last time I ordered the RA modifiers (from the prior buy), and I was hoping SP had fixed their problems with this...

  I've attached a picture below of one of the worse ones I have (the long right shift).

  Thanks;

Offline Permeability

  • Posts: 192
  • Location: USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1964 on: Tue, 16 April 2013, 18:42:24 »
  I received mine. Thanks T.J.

 Unfortunately I'm seeing some 'bleed-through' on my White-On Red modifiers  :(. It looks like the White plastic underneath is showing though the red resulting in color variations.

  Is this how they all are, or am I just 'lucky'?  I got this the last time I ordered the RA modifiers (from the prior buy), and I was hoping SP had fixed their problems with this...

  I've attached a picture below of one of the worse ones I have (the long right shift).

  Thanks;

Yeah mine are like that too, I'm pretty sure they haven't fixed it.
Keyboards:
'The Cheat' - lubed 62g Clears
Ducky Shine 3 TKL lubed 45g Reds (Work)

Offline gbohn

  • Posts: 105
  • Location: New York State, United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1965 on: Tue, 16 April 2013, 19:03:18 »
> Yeah mine are like that too, I'm pretty sure they haven't fixed it.

Rats! I also noticed that I had a bit of a different color variation on some of the red keys as well.

At first I thought they were cracked, but it might just be some darker color streaking. The 'side' pictures show it best, and it continues onto the face of the key (although it doesn't show as much except at some angles, I circled it on one of them even though it's hard to see in the picture).

  The red keys seem to be hard for them to get right for some reason. At least they aren't all that bad.

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1966 on: Tue, 16 April 2013, 19:39:19 »
> Yeah mine are like that too, I'm pretty sure they haven't fixed it.

Rats! I also noticed that I had a bit of a different color variation on some of the red keys as well.

At first I thought they were cracked, but it might just be some darker color streaking. The 'side' pictures show it best, and it continues onto the face of the key (although it doesn't show as much except at some angles, I circled it on one of them even though it's hard to see in the picture).

  The red keys seem to be hard for them to get right for some reason. At least they aren't all that bad.

I also noticed the streaking. I don't mind it, for it's hardly noticeable, but it's still there.
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline phx

  • Posts: 361
  • Location: Boston, Massachusetts
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1967 on: Tue, 16 April 2013, 20:27:38 »
  I received mine. Thanks T.J.

 Unfortunately I'm seeing some 'bleed-through' on my White-On Red modifiers  :(. It looks like the White plastic underneath is showing though the red resulting in color variations.

  Is this how they all are, or am I just 'lucky'?  I got this the last time I ordered the RA modifiers (from the prior buy), and I was hoping SP had fixed their problems with this...

  I've attached a picture below of one of the worse ones I have (the long right shift).

  Thanks;

Yeah mine are like that too, I'm pretty sure they haven't fixed it.

Have it on my RA2 set as well.
never noticed until you pointed it out, frankly it doesn't really bother me.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1968 on: Tue, 16 April 2013, 20:27:56 »
Keys arrived and they look awesome....but.... I ordered 2 sets and only received 1 : (

And that's all you'll get.

Until the addendum package arrives at your address later this week.  Sorry for the mistake.

Me too?

 - Ron I samwisekoi

What did I miss on your's?


If anyone is reselling their red on white  :p

Keep an eye out, I'll have a small amount of left overs up at some point

Offline jabar

  • Posts: 848
  • Location: TX, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1969 on: Tue, 16 April 2013, 20:39:50 »
Hey TJ,

I received an extra 6^ but no F9 key for RoW. Everything else looks great though.

Leopold FC660C - Max Keyboard Nighthawk X8 - Ducky DK9008 Shine II 78 Edition - Noppoo Choc Mini - Cherry G80-2100HDD - Cherry G80-8113HDPUS - Plu-M87 - Leopold FC700R Ergo Clears - Deck Legend Frost 105 - IBM F PC Keyboard - IBM M 122 (Lexmark) - Apple Extended Keyboard II

Phantom 7bit

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1970 on: Tue, 16 April 2013, 20:58:24 »
Hey TJ,

I received an extra 6^ but no F9 key for RoW. Everything else looks great though.

Show Image


Bah, and you're far away while still being in TX.  I'll get you an f9 asap

Offline jabar

  • Posts: 848
  • Location: TX, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1971 on: Tue, 16 April 2013, 21:02:42 »
If I was driving upstate I would definitely stop by but not anytime soon :(
Leopold FC660C - Max Keyboard Nighthawk X8 - Ducky DK9008 Shine II 78 Edition - Noppoo Choc Mini - Cherry G80-2100HDD - Cherry G80-8113HDPUS - Plu-M87 - Leopold FC700R Ergo Clears - Deck Legend Frost 105 - IBM F PC Keyboard - IBM M 122 (Lexmark) - Apple Extended Keyboard II

Phantom 7bit

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1972 on: Tue, 16 April 2013, 21:06:33 »
If I was driving upstate I would definitely stop by but not anytime soon :(

Yeah and I have no need to be in Austin anytime soon either.

Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [GB] Klaxon! The RA2.0 clone
« Reply #1973 on: Tue, 16 April 2013, 21:50:16 »

30- $45 <- WoR x39
40 - $36

30 - $45<- RoW x39
40 - $36

I'll take an extra base WoR and an extra mod RoW to throw both into the next tier!

 - Ron | samwisekoi

These.

 - Ron I samwisekoi
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone
« Reply #1974 on: Tue, 16 April 2013, 22:03:45 »

30- $45 <- WoR x39
40 - $36

30 - $45<- RoW x39
40 - $36

I'll take an extra base WoR and an extra mod RoW to throw both into the next tier!

 - Ron | samwisekoi

These.

 - Ron I samwisekoi

I apparently never saw that because I only billed you for one set of row base/wor mods/wor 17key...

And of course, that's the only base set I don't have extras of.

Offline mashby

  • ** Moderator Emeritus
  • Posts: 2828
  • Location: Nashville, TN
  • What Up Shoney? (ツ)_/¯
    • Mashby
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1975 on: Tue, 16 April 2013, 22:10:36 »
I simply couldn't resist any longer. I haven't even finished building up my Poker with MX-Whites, but I still had to put them on and give them a test drive. What can I say? I'm powerless to resist the Klaxon!


Offline CPTBadAss

  • Woke up like this
  • Posts: 14365
    • Tactile Zine
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1976 on: Tue, 16 April 2013, 22:14:52 »
Mashby, that picture cause my Leopold to be flooded with drool. I demand you reimburse me the cost of my board :D

Offline mashby

  • ** Moderator Emeritus
  • Posts: 2828
  • Location: Nashville, TN
  • What Up Shoney? (ツ)_/¯
    • Mashby
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1977 on: Tue, 16 April 2013, 22:23:10 »
Mashby, that picture cause my Leopold to be flooded with drool. I demand you reimburse me the cost of my board :D


Offline samwisekoi

  • MAWG since 1997
  • * Administrator
  • Posts: 2480
  • Location: Mt. View, California
  • Sorry, moving houses. Be back ASAP.
    • Tweet samwisekoi
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1978 on: Tue, 16 April 2013, 23:01:51 »
 :'(
I like keyboards and case modding.  Everything about a computer should be silent -- except the KEYBOARD!

'85 IBM F-122/Soarer Keyboard |  Leopold FC200 TKL (Browns) + GH36 Keypad (Browns/Greens) | GH-122 (Whites/Greens) with Nuclear Data Green keycaps in a Unicomp case

Offline Glod

  • * Elevated Elder
  • Posts: 1998
  • Location: Virginia, USA
  • Also Known As Ergonomech
    • YouTube Channel
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1979 on: Wed, 17 April 2013, 00:51:26 »
<removed this post, PM'd TJ instead, TJ you have a PM!>
« Last Edit: Wed, 17 April 2013, 01:16:12 by Glod »

Offline Mysteric

  • Formerly 'Mackem'
  • Posts: 241
  • Location: United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1980 on: Wed, 17 April 2013, 11:01:31 »
I'd be up for a round 2 of this for sure now that I am in a better financial situation.

Offline aggiejy

  • ** Moderator Emeritus
  • Posts: 1126
  • Location: ~Austin, Texas
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1981 on: Wed, 17 April 2013, 11:32:42 »
It'd be round 4 if so, and something doesn't sound right about round 4.  But if in a year or whatever someone does another red alert... please do the 7-bit style legends!

Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1982 on: Wed, 17 April 2013, 12:37:53 »
It'd be round 4 if so, and something doesn't sound right about round 4.  But if in a year or whatever someone does another red alert... please do the 7-bit style legends!
yes. i want that as well.
- WTB/WTT - Cotton Candy Brobot V2

Offline lbwmoo

  • Posts: 9
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1983 on: Wed, 17 April 2013, 13:03:28 »
It'd be round 4 if so, and something doesn't sound right about round 4.  But if in a year or whatever someone does another red alert... please do the 7-bit style legends!

I'm sorry, I'm still a bit new, can someone point me at some images of those legends?


Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1984 on: Wed, 17 April 2013, 13:11:28 »
KlaxonR2: Electric Boogaloo will indeed happen, but probably won't get started until Novemberish.

Offline mushupork

  • Posts: 142
  • Location: Wisconsin, USA
  • I am not knowing
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1985 on: Wed, 17 April 2013, 14:06:37 »
Klaxon 2 ... Electric Boogaloo ...
Wanted:  Windowed capslock for a QFR

Offline oluf

  • formerly olaph
  • Posts: 214
  • Location: Oregon
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1986 on: Wed, 17 April 2013, 14:46:59 »
All my keys have been received and accounted for.. Thanks!

I put my keys on a few boards, and they look great!! ..except the stupid windows logo. =(

I would buy a 7-Bit mod set in each color... Or, even just some blank 1.25's for the bottom row... Anything to get the dumb 'doze logo off my boards. =)

In the future, perhaps a "Majority rules" disclaimer in the OP? I always figure it's implied with group buys, but others don't it seems.

Offline Leslieann

  • * Elevated Elder
  • Posts: 4519
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1987 on: Wed, 17 April 2013, 15:01:17 »
In the future, perhaps a "Majority rules" disclaimer in the OP? I always figure it's implied with group buys, but others don't it seems.
Absolutely not.
That should be handled in the Interest Check phase, not the Group Buy.

Once you start the buy, people are ordering based on what was initially offered. Any time a change is made you have to take into account how many will opt out and not pay? How would it effect tiers? This is the sort of thing that causes group buys to not go to completion and anger people involved.

How would you like it if you ordered a Kmac in red, 1.5 modifiers and no winkey, and then it was changed to lime green and orange, 1.25 mods with winkey because majority changed it at the last minute? What if that raised the price by $100? Now you are on the hook for a very expensive keyboard you may or may not want.
Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion

Offline oluf

  • formerly olaph
  • Posts: 214
  • Location: Oregon
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1988 on: Wed, 17 April 2013, 15:38:20 »
I understand what you mean. However, as you know, some things aren't brought to light until the GB has actually started.. Especially on some of the longer running GBs. I agree that the fundamentals of the GB shouldn't be changed after it's been started, but IMO the fundamentals of this GB were the RA color scheme, not the legends. We're all entitled to our own opinions though. =)

Ultimately, the rules of the GB are set by the GB organizer, and if she/he wants to set a "Majority rules" disclaimer at the beginning of the GB, so be it... I certainly wouldn't be dissuaded! =D

<this message was typed on RoG Klaxon keycaps>

Offline CPTBadAss

  • Woke up like this
  • Posts: 14365
    • Tactile Zine
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1989 on: Wed, 17 April 2013, 20:55:11 »


Sorted. There were no errors. ALL HAIL KING KLAXON.

Seriously stoked that I i now have the set that originally brought me to GH. Thanks for running this GB TJ.

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1990 on: Wed, 17 April 2013, 20:58:19 »
Show Image


Sorted. There were no errors. ALL HAIL KING KLAXON.

Seriously stoked that I i now have the set that originally brought me to GH. Thanks for running this GB TJ.

Needs less row and more RoG
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline Saturn

  • Posts: 130
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1991 on: Thu, 18 April 2013, 07:02:14 »
How would you like it if you ordered a Kmac in red, 1.5 modifiers and no winkey, and then it was changed to lime green and orange, 1.25 mods with winkey because majority changed it at the last minute? What if that raised the price by $100? Now you are on the hook for a very expensive keyboard you may or may not want.

lime green is pretty sweet, though, we can all agree on this

Offline CPTBadAss

  • Woke up like this
  • Posts: 14365
    • Tactile Zine
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1992 on: Thu, 18 April 2013, 08:21:52 »
Don't be a hater inteli722. Did you get an RoG set?

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1993 on: Thu, 18 April 2013, 11:37:15 »
Don't be a hater inteli722. Did you get an RoG set?

RoG base and tsangan.
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline CPTBadAss

  • Woke up like this
  • Posts: 14365
    • Tactile Zine
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1994 on: Thu, 18 April 2013, 11:42:13 »
Don't be a hater inteli722. Did you get an RoG set?

RoG base and tsangan.

Pics or it didn't happen :P

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1995 on: Thu, 18 April 2013, 12:56:37 »
Don't be a hater inteli722. Did you get an RoG set?

RoG base and tsangan.

Pics or it didn't happen :P

Edit: slightly better potato pic:



Pics were a few pages back.

http://geekhack.org/index.php?topic=37225.msg853957#msg853957
« Last Edit: Thu, 18 April 2013, 13:06:14 by inteli722 »
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline whiskytango

  • Posts: 576
  • Location: Birmingham, Alabama
  • Don't touch the trim
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1996 on: Thu, 18 April 2013, 12:58:15 »
Don't be a hater inteli722. Did you get an RoG set?

RoG base and tsangan.

Out of curiosity, what are you going to do with a RoG tsangan if you got RoG base but didn't get the RoG modifiers?

Also, I am typing this on RoG base :)

Edit: Pics, it DID happen...
« Last Edit: Thu, 18 April 2013, 13:00:38 by whiskytango »
I stay busy with work and family these days, but I'm still around, lurking.

Offline Emmiya

  • Posts: 132
  • Location: Hull - United Kingdom.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1997 on: Thu, 18 April 2013, 13:19:54 »
Intelli722, I may be blind, but i do believe you have your space bar on backwards. Otherwise, that is looking ****ing sweet.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1998 on: Thu, 18 April 2013, 13:34:39 »
Intelli722, I may be blind, but i do believe you have your space bar on backwards. Otherwise, that is looking ****ing sweet.

That's the new thing the kids are doing

Offline CPTBadAss

  • Woke up like this
  • Posts: 14365
    • Tactile Zine
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1999 on: Thu, 18 April 2013, 13:39:34 »
Wheres that meme from #mechworldproblems? My SP spacebar is too sharp rofl