Author Topic: Post your tricked out CM QFRs (Read 102170 times)

VesperSAINT · « **Reply #100 on:** Sun, 12 May 2013, 18:31:28 »

Quote from: BunnyLake on Sun, 12 May 2013, 18:27:39

Quote from: PolaBurrr on Sun, 12 May 2013, 18:15:39
Quote from: Goodfella on Sun, 12 May 2013, 14:10:53
Took some shots of the new keyboard, finally got a brandless one, it turned out pretty sharp. QFR with browns, pbt white engraved keycaps, and a smokebot brobot..

Show Image

Show Image

whats wrong with your spacebar?

lol

What's even funnier than the spacebar on wrong is that the dood posted this question as his first post

)

Do you like a lower spacebar profile or something?

BunnyLake · « **Reply #101 on:** Sun, 12 May 2013, 18:38:14 »

Quote from: VesperSAINT on Sun, 12 May 2013, 18:31:28

Quote from: BunnyLake on Sun, 12 May 2013, 18:27:39
Quote from: PolaBurrr on Sun, 12 May 2013, 18:15:39
Quote from: Goodfella on Sun, 12 May 2013, 14:10:53
Took some shots of the new keyboard, finally got a brandless one, it turned out pretty sharp. QFR with browns, pbt white engraved keycaps, and a smokebot brobot..

Show Image

Show Image

whats wrong with your spacebar?

lol

What's even funnier than the spacebar on wrong is that the dood posted this question as his first post )

Do you like a lower spacebar profile or something?

a lot of people rock them like that, i just found it funny that the guy made an account just to ask that

Jocelyn · « **Reply #102 on:** Sun, 12 May 2013, 18:45:02 »

Quote from: VesperSAINT on Sun, 12 May 2013, 18:31:28

What's even funnier than the spacebar on wrong is that the dood posted this question as his first post )

Do you like a lower spacebar profile or something?

That's funny, but it's not on wrong. It feels so much better upside down

Halverson · « **Reply #103 on:** Sun, 12 May 2013, 18:48:59 »

It feels sooooo good upside down

VesperSAINT · « **Reply #104 on:** Sun, 12 May 2013, 18:49:28 »

Quote from: Jocelyn on Sun, 12 May 2013, 18:45:02

Quote from: VesperSAINT on Sun, 12 May 2013, 18:31:28

What's even funnier than the spacebar on wrong is that the dood posted this question as his first post )

Do you like a lower spacebar profile or something?

That's funny, but it's not on wrong. It feels so much better upside down

Aw god, now you have me curious!

Quote from: Halverson on Sun, 12 May 2013, 18:48:59

It feels sooooo good upside down

I'm sensing 18+ material here

)

Goodfella · « **Reply #105 on:** Sun, 12 May 2013, 18:50:56 »

I prefer it flipped, it feels better to me when I am playing games and typing...

BunnyLake · « **Reply #106 on:** Sun, 12 May 2013, 18:51:17 »

Quote from: VesperSAINT on Sun, 12 May 2013, 18:49:28

Quote from: Jocelyn on Sun, 12 May 2013, 18:45:02
Quote from: VesperSAINT on Sun, 12 May 2013, 18:31:28

What's even funnier than the spacebar on wrong is that the dood posted this question as his first post )

Do you like a lower spacebar profile or something?

That's funny, but it's not on wrong. It feels so much better upside down

Aw god, now you have me curious!

Quote from: Halverson on Sun, 12 May 2013, 18:48:59
It feels sooooo good upside down

I'm sensing 18+ material here )

look what you have started jocelyn, always a tease

VesperSAINT · « **Reply #107 on:** Sun, 12 May 2013, 18:59:33 »

Quote from: Goodfella on Sun, 12 May 2013, 18:50:56

I prefer it flipped, it feels better to me when I am playing games and typing...

Thank you for clarifying

I'll have to give it a shot sometime, for sure. I wasn't teasing. Just very curious!

Jocelyn · « **Reply #108 on:** Sun, 12 May 2013, 19:07:51 »

Quote from: BunnyLake on Sun, 12 May 2013, 18:51:17

look what you have started jocelyn, always a tease

What? You can tell because the crossbar is really low

kelbear · « **Reply #109 on:** Mon, 27 May 2013, 11:57:37 »

Quote from: absyrd on Fri, 08 March 2013, 11:54:51

Rusto "textured" black painted QFR with (The Man, The Legend) Boost's Superhero keycap prototype...

Show Image

Show Image

Paint has held up a LONG time at this point. Especially since it is my daily driver, too.

That looks awesome! How did you paint it like that?

SeriouSSpotS · « **Reply #110 on:** Sat, 08 June 2013, 07:02:37 »

Quote from: nubbinator on Tue, 19 March 2013, 20:59:14

Painted case, engraved PBT caps, and some doubleshots. I'm looking for the right paracord, then I'll be adding a custom sleeved cable.

Show Image

Show Image

Show Image

Show Image

Show Image

looks awesome!

SeriouSSpotS · « **Reply #111 on:** Sat, 08 June 2013, 07:04:10 »

Quote from: BornEvil on Sun, 24 March 2013, 19:04:10

here is mine:

from this:

Show Image

to this:

Show Image

Show Image

Show Image

Took me 2 hour with some vinyl. My potato makes it look beige, but it it actually high gloss brilliant white.

Vinyl is brilliant, plan to change it's color every few months cos it is so cheap. What color should i go for next, i was thinking yellow...

Love how clean it looks

WhiteFireDragon · « **Reply #112 on:** Sat, 08 June 2013, 07:24:36 »

Super limited edition

absyrd · « **Reply #113 on:** Sat, 08 June 2013, 07:26:55 »

You do all 6 of those? Nice.

SpAmRaY · « **Reply #114 on:** Sat, 08 June 2013, 07:34:27 »

Quote from: WhiteFireDragon on Sat, 08 June 2013, 07:24:36

Super limited edition

Show Image

Show Image

Wow...not only are those switches awesome but that thing looks really beautiful!

SeriouSSpotS · « **Reply #115 on:** Sat, 08 June 2013, 07:57:52 »

I haven't got anything fancy, I didn't think a picture was necessary as all I have done is changes the stock key-caps (Didn't like the font) for some Filco ones I brought from the keyboardco.com.
I am on the look out for some nice double shots or some PBT caps, but don't really have the money at the moment

So I will just have to wait

(Being a student sucks sometimes)

Smeagol_RP · « **Reply #116 on:** Sat, 08 June 2013, 17:33:40 »

Ready to play some FPS

Badwrench · « **Reply #117 on:** Sat, 08 June 2013, 19:14:04 »

'merica

Photoelectric · « **Reply #118 on:** Sat, 08 June 2013, 21:28:12 »

Quote from: WhiteFireDragon on Sat, 08 June 2013, 07:24:36

Super limited edition

Show Image

Show Image

Is that stock plate or a custom plate? I'd love an unfinished metal plate for my upcoming Filco mod.

WhiteFireDragon · « **Reply #119 on:** Sat, 08 June 2013, 21:39:58 »

^ It's obviously a custom plate. There are plate-mounted cherry stabilizers on there, and the stock plate does not have an option to mount cherry stabilizers. Yes it will be a raw, brushed finish. It's stainless steel so it can't be anodized, and powder-coating adds too much to cost.

Get in line ;p

Photoelectric · « **Reply #120 on:** Sat, 08 June 2013, 21:41:40 »

Quote from: WhiteFireDragon on Sat, 08 June 2013, 21:39:58

^ It's obviously a custom plate. There are plate-mounted cherry stabilizers on there, and the stock plate does not have an option to mount cherry stabilizers. Yes it will be a raw, brushed finish. It's stainless steel so it can't be anodized, and powder-coating adds too much to cost.

Get in line ;p

I already got in line a few days ago

But how long is that line going to wait?

WhiteFireDragon · « **Reply #121 on:** Sat, 08 June 2013, 21:44:48 »

oh haha you're right, you did post in that thread. Sorry, I haven't been keeping tabs on that thread. Once I get most of the phantom plate and PCB shipments out, I'll put more attention to a round2 of those plates.

Photoelectric · « **Reply #122 on:** Sat, 08 June 2013, 21:55:44 »

Quote from: WhiteFireDragon on Sat, 08 June 2013, 21:44:48

oh haha you're right, you did post in that thread. Sorry, I haven't been keeping tabs on that thread. Once I get most of the phantom plate and PCB shipments out, I'll put more attention to a round2 of those plates.

So basically at least a couple months out for deliveries, right?

rarar · « **Reply #123 on:** Tue, 25 June 2013, 22:39:55 »

~~Image~~

nubbinator · « **Reply #124 on:** Tue, 25 June 2013, 23:13:19 »

Quote from: rarar on Tue, 25 June 2013, 22:39:55

Show Image

I fail to see what point you're trying to make here. People like to show off stuff they customized. No one made you come into the thread.

Or are you just reverting back to your older ways?

rarar · « **Reply #125 on:** Tue, 25 June 2013, 23:48:34 »

Sorry, I'll remove the post, thought a bit of humor would be nice, it was just meant as a joke

Photoelectric · « **Reply #126 on:** Tue, 25 June 2013, 23:57:28 »

On that note, there aren't enough tricked out QFRs being shown! Tricked out QFR owners, please stop slacking!!!

rarar · « **Reply #127 on:** Tue, 25 June 2013, 23:58:34 »

Well, since you asked, here's mine!

Photoelectric · « **Reply #128 on:** Tue, 25 June 2013, 23:59:50 »

Very nice red case!

kenmai9 · « **Reply #129 on:** Wed, 26 June 2013, 01:38:11 »

Quote from: Photoelectric on Tue, 25 June 2013, 23:57:28

On that note, there aren't enough tricked out QFRs being shown! Tricked out QFR owners, please stop slacking!!!

Getting my QFR soon.. Gonna paint it.. It's gon be good.

Smeagol_RP · « **Reply #130 on:** Thu, 27 June 2013, 10:47:23 »

Painted. White pearl.

Photoelectric · « **Reply #131 on:** Thu, 27 June 2013, 10:53:08 »

Quote from: Smeagol_RP on Thu, 27 June 2013, 10:47:23

Painted. White pearl.

Show Image

Show Image

Cool! What did you paint it with?

Smeagol_RP · « **Reply #132 on:** Thu, 27 June 2013, 10:59:02 »

I just did the sandblasting job. I took it to a motorcycles painter. He's painting the top panel too.

Photoelectric · « **Reply #133 on:** Thu, 27 June 2013, 11:19:05 »

Ah nice. I've been wondering about painting plates. My thought it to use engine enamel and bake it in the oven to cure. Should be pretty durable. I would do that with stock plates, but I'll probably leave universal plates by WFD as is, clean brushed metal.

Smeagol_RP · « **Reply #134 on:** Sat, 29 June 2013, 10:50:17 »

Got the top panel from the painter. I liked his work.

Quote

Show Image

Show Image

Photoelectric · « **Reply #135 on:** Sat, 29 June 2013, 10:56:46 »

I like that color a lot

SeriouSSpotS · « **Reply #136 on:** Sat, 29 June 2013, 11:01:00 »

That is a really nice colour, is it metallic?

Smeagol_RP · « **Reply #137 on:** Sat, 29 June 2013, 11:17:20 »

Don't know. He just painted but it was too much matte so I asked him to varnish. Now I'm just waiting the stickers and MX clears.

Photoelectric · « **Reply #138 on:** Sat, 29 June 2013, 11:47:01 »

It looks like either a pearl clear coat over white to me or a pearl white with a transparent clear coat. Not really metallic.

kenmai9 · « **Reply #139 on:** Sat, 29 June 2013, 18:06:50 »

Just dyed my QFR burgundy using VHT Vinyl Dye. There's some white residue/blotches around the case, but hopefully I can get rid of them with another coat next week.
Also bonus Bunnycap!

bazemk1979 · « **Reply #140 on:** Sat, 29 June 2013, 20:40:32 »

Quote from: Smeagol_RP on Sat, 29 June 2013, 10:50:17

Got the top panel from the painter. I liked his work.

Show Image

Quote
Show Image

Show Image

This is Brazil!!!!!

UniClown · « **Reply #141 on:** Sat, 29 June 2013, 21:34:22 »

Quote from: kenmai9 on Sat, 29 June 2013, 18:06:50

Just dyed my QFR burgundy using VHT Vinyl Dye. There's some white residue/blotches around the case, but hopefully I can get rid of them with another coat next week.
Also bonus Bunnycap!

That looks really nice. Is there any place I can find more information on how to do that?

Puddsy · « **Reply #142 on:** Sun, 30 June 2013, 06:32:23 »

I've posted my keyboard to reddit a few times. Figured I'd put it here too, as I made my account today.

This picture is from March. I can't take one right now, as I'm in Japan, but here's the best I can do.

Photoelectric · « **Reply #143 on:** Sun, 30 June 2013, 06:37:25 »

Quote from: TacticalStache on Sun, 30 June 2013, 06:32:23

I've posted my keyboard to reddit a few times. Figured I'd put it here too, as I made my account today.

Show Image

This picture is from March. I can't take one right now, as I'm in Japan, but here's the best I can do.

http://geekhack.org/index.php?topic=36709.0

Puddsy · « **Reply #144 on:** Sun, 30 June 2013, 06:42:05 »

Quote from: Photoelectric on Sun, 30 June 2013, 06:37:25

Quote from: TacticalStache on Sun, 30 June 2013, 06:32:23
I've posted my keyboard to reddit a few times. Figured I'd put it here too, as I made my account today.

Show Image

This picture is from March. I can't take one right now, as I'm in Japan, but here's the best I can do.

http://geekhack.org/index.php?topic=36709.0

Posted.

Photoelectric · « **Reply #145 on:** Sun, 30 June 2013, 07:03:33 »

I forgot to say, Welcome to GH

Toad1677 · « **Reply #146 on:** Sun, 30 June 2013, 10:53:17 »

Here my QFR Blue with a black case. It looks a lot better then the original gray case.

UniClown · « **Reply #147 on:** Sun, 30 June 2013, 11:33:59 »

Quote from: TacticalStache on Sun, 30 June 2013, 06:32:23

I've posted my keyboard to reddit a few times. Figured I'd put it here too, as I made my account today.

Show Image

This picture is from March. I can't take one right now, as I'm in Japan, but here's the best I can do.

What's up Tactical! I've seen you on reddit a lot. I go by Yungclowns there. Welcome to GH.

SpAmRaY · « **Reply #148 on:** Sun, 30 June 2013, 11:51:32 »

Quote from: kenmai9 on Sat, 29 June 2013, 18:06:50

Just dyed my QFR burgundy using VHT Vinyl Dye. There's some white residue/blotches around the case, but hopefully I can get rid of them with another coat next week.
Also bonus Bunnycap!

Is this the first dyed QFR top?

Interested in how this turns out.

nubbinator · « **Reply #149 on:** Sun, 30 June 2013, 14:35:50 »

Quote from: TacticalStache on Sun, 30 June 2013, 06:32:23

I've posted my keyboard to reddit a few times. Figured I'd put it here too, as I made my account today.

More
Show Image

This picture is from March. I can't take one right now, as I'm in Japan, but here's the best I can do.

How do you type with all those different profiles?

News:

Author Topic: Post your tricked out CM QFRs (Read 102170 times)