WTT/WTS Kmac

[evolyn]

wts kmac le pm me
Information Specc:
Its a Kmac le with paintbrush blue color
62g gold springs
mx clears
lubed and stickerd
White Led on - WASD
Red Led on Caps Controll and scroll
BLue Led on f1 to f12


pm me for  more info's trades or deals accepted.

[quochung1989]

Can you give me info about your kmac? Thank you

[Moosecraft]

pmd

[metafour]

Can you give me info about your kmac? Thank you

It's buy first, ask questions later around here.

[VesperSAINT]

Good God that is absolutely beautiful! Too bad it's out of my price range. I'm drooling so hard right now ....

[Shadovved]

Can you give me info about your kmac? Thank you

It's buy first, ask questions later around here.

You snooze, you lose )

[tom88jerry]

Pm'd

[evolyn]

to the stats:
65g gold springs
lubed stickerd
mx clears.
regards evolyn

[Jocelyn]

I wish I liked TKL, but GLWS evolyn!!!

[evolyn]

I wish I liked TKL, but GLWS evolyn!!!

hihihi thx jocelyn

[quochung1989]

Is there kmac2 or other? Thanks & GLWS 

[Photekq]

Evolyn you spent so long finding it and now you're selling it? How come?

GLWS anyway Also, where are you from? Some people might want to know because of postage.

[germy]

I would like to purchase this but the price of $600 is way out of my budget.

[evolyn]

Is there kmac2 or other? Thanks & GLWS 

[evolyn]

Evolyn you spent so long finding it and now you're selling it? How come?

GLWS anyway Also, where are you from? Some people might want to know because of postage.

its just i need some money and i could get another kmac .
so wouldn't be like idont have a kmac anymore !
but funny that u remember this.

[evolyn]

I would like to purchase this but the price of $600 is way out of my budget.

please dont post stuff like this i just asked for pm's thx u very much

[germy]

please dont post stuff like this i just asked for pm's thx u very much

I don't understand what I did wrong. Isn't that what you were asking in pms?

[tgujay]

please dont post stuff like this i just asked for pm's thx u very much

I don't understand what I did wrong. Isn't that what you were asking in pms?

He doesn't want people to know how much he's asking apparently.  Sounds a little waah to me.

[evolyn]

sure u can say but  i ask for pm's
regards

[ekw808]

He probably had to cover some expensive shipping charges to get the board to where he is, and possible re anodizing costs as well.

375 kmac
60-100 switches, modding, assembly (hard to tell if stickered from that pic)
30-60? reanodizing
50-100 shipping to him

Everything almost at cost.... just that being INT makes it much more expensive

[BlackDragonTribal]

Thanks about your info, ekw808

[Rendom]

Thanks about your info, ekw808

Wow, this is your first post?

GLWS.

[BlackDragonTribal]

Thanks about your info, ekw808

Wow, this is your first post?

GLWS.

Yes. I registered for about minutes ago.

[evolyn]

Thanks about your info, ekw808

Wow, this is your first post?

GLWS.

Yes. I registered for about minutes ago.

welcome to geekhack best community ever

[VesperSAINT]

Thanks about your info, ekw808

Wow, this is your first post?

GLWS.

Yes. I registered for about minutes ago.

Welcome to GH, feng.. I mean BDT! I seriously assumed you were another user on this forum because of your avatar until I read, "Wow, this is your first post?" Heeheehee~ I hope you enjoy your stay here!

[BlackDragonTribal]

Thanks about your info, ekw808

Wow, this is your first post?

GLWS.

Yes. I registered for about minutes ago.

Welcome to GH, feng.. I mean BDT! I seriously assumed you were another user on this forum because of your avatar until I read, "Wow, this is your first post?" Heeheehee~ I hope you enjoy your stay here!

Thanks your interested. But I'm not feng. So I think to change my avatar because someone can confuse feng with me 

[do_Og@n]

Dear god I want this keyboard! To bad it would cost me close to my entire vacation savings or every other keyboard I have.

Let me know if you are willing to trade anything. I've got a lot of switches, caps, and keyboards....including a 91 IBM SSK, Klaxon DS Set, and a CCnG on it's way.

do_Og@n crossing fingers.

[evolyn]

wts kmac le pm me
Information Specc:
Its a Kmac le with paintbrush blue color
62g gold springs
mx clears
lubed and stickerd
White Led on - WASD
Red Led on Caps Controll and scroll
BLue Led on f1 to f12

The price is 600dollar + 50 dollar shipping in almost evry country with injurense.

ichanged some stuff if people still instrestead in it

[evolyn]

Its still for sale write me

[Jupiter]

Sorry if this is inappropriate, but why does this cost 600+50 shipping?

Don't KMAC's usualy go for 450-500 + Shipping? What's special about this one?

[evolyn]

Sorry if this is inappropriate, but why does this cost 600+50 shipping?

Don't KMAC's usualy go for 450-500 + Shipping? What's special about this one?

well no problem i got it for this price . its special
speccs are in the top of the thread.
best regards

[evolyn]

still for sale

[sth]

He probably had to cover some expensive shipping charges to get the board to where he is, and possible re anodizing costs as well.

375 kmac
60-100 switches, modding, assembly (hard to tell if stickered from that pic)
30-60? reanodizing
50-100 shipping to him

Everything almost at cost.... just that being INT makes it much more expensive

if i'm threadcrapping, , but kmac LE kit was 275 not 375

[Jupiter]

Plus I'm at a loss as to why people should reimburse him for his own shipping? If everyone did that the price of keyboards would rise indefinitely.

[evolyn]

sitll on sale.

[evolyn]

sitll on sale.

write me i can lower the cost istill have the board.

[aggiejy]

if i'm threadcrapping, , but kmac LE kit was 275 not 375

Perhaps the original sale, but Sherry sold some later that were closer to $400.  (I bought one.)  At least in my case, I ended up (stupidly) spending close to $900 on mine.  Of course, that included some (unpleasant) assembly service, reanodized case, etc.  Point is, it's hard to judge exactly what someone may have paid for their kmac.  A mostly-stock one is much cheaper than a pimped out re-anodized one.

Just a little defense for the pricing.  In the end though, it's worth what someone is willing to pay.  Looks like a great board.  In hindsight I wish something like this was available when I was looking to build... would have save a lot of money, hassle, and time.

[litster]

aggiejy, what happened to your unpleasant assembly service? 

BTW, that blue looks very sweet and unique.  GLWS!

[aggiejy]

Well, TheProf did it.  It took a VERY long time, lots of hassle, etc... but the keys all stick and everything, even after a lot of use. (Well, not a *whole* lot, because it's probably my least favorite board to type on.)  I think overlubed based on a few switches I desoldered.  (Didn't help I have light korean springs... but nothing that others haven't done lots of times.)

[Polymer]

Point is, it's hard to judge exactly what someone may have paid for their kmac.  A mostly-stock one is much cheaper than a pimped out re-anodized one.

It is irrelevant what you paid for it.  You can try to sell it for that but if that was the case, as someone pointed out, the prices would only go up. 

You have to expect to take a loss..especially if you do mods that are not adding a lot of value...

If you don't take a loss, more power to you...

[aggiejy]

I don't disagree.

[Poom]

I got two noob questions, how much does the keyboard weigh?

and with that 62g spring, does it feel lighter or heavier than the original mx clears?

[do_Og@n]

I got two noob questions, how much does the keyboard weigh?

and with that 62g spring, does it feel lighter or heavier than the original mx clears?

My best guess is around 5 pounds and the clears normally have 55 gram springs (so heavier).

[Sifo]

I got two noob questions, how much does the keyboard weigh?

and with that 62g spring, does it feel lighter or heavier than the original mx clears?

My best guess is around 5 pounds and the clears normally have 55 gram springs (so heavier).

Clears have 55g actuation force, these are 62g bottom out force. It's 2g heavier than a red/brown/blue spring, thus much lighter.

Also I've wanted that KMAC for a long time, but not the greatest price. glws

[Poom]

I got two noob questions, how much does the keyboard weigh?

and with that 62g spring, does it feel lighter or heavier than the original mx clears?

My best guess is around 5 pounds and the clears normally have 55 gram springs (so heavier).

Clears have 55g actuation force, these are 62g bottom out force. It's 2g heavier than a red/brown/blue spring, thus much lighter.

Also I've wanted that KMAC for a long time, but not the greatest price. glws

Hum, I feel the stock clears are a little too heavy for me, though I still use it at work everyday.

Would lubing makes any difference in terms of force required? or just smoother? I never tried lubed keys before.

However the KMAC plate allows easy switch opening to change the springs without desoldering? changing springs require you to re-apply grease?

[SeriouSSpotS]

GLWS 

[ekw808]

Stock plate does NOT allow for easy mod, you'd have to desolder and the kmac le weighs around 3.5 lbs.

[Sifo]

I got two noob questions, how much does the keyboard weigh?

and with that 62g spring, does it feel lighter or heavier than the original mx clears?

My best guess is around 5 pounds and the clears normally have 55 gram springs (so heavier).

Clears have 55g actuation force, these are 62g bottom out force. It's 2g heavier than a red/brown/blue spring, thus much lighter.

Also I've wanted that KMAC for a long time, but not the greatest price. glws

Hum, I feel the stock clears are a little too heavy for me, though I still use it at work everyday.

Would lubing makes any difference in terms of force required? or just smoother? I never tried lubed keys before.

However the KMAC plate allows easy switch opening to change the springs without desoldering? changing springs require you to re-apply grease?

I don't see what the problem is, 62g gold is pretty light compared to clears. Other questions have been answered

[evolyn]

GLWS 

thx alot

[Poom]

Oh thank you everyone for the answers. This board is however still out of my range.