Author Topic: [GB] $60 60% case (Aluminium) (SHIPPING - 99% DISPATCHED! :O ) (Read 247179 times)

SeriouSSpotS · « **Reply #1200 on:** Sun, 17 August 2014, 13:36:45 »

Have all the UK orders been shipped yet? Just wondering

pexon · « **Reply #1201 on:** Sun, 17 August 2014, 13:56:35 »

Yup, all UK orders gone!

SeriouSSpotS · « **Reply #1202 on:** Sun, 17 August 2014, 14:10:09 »

Nice one, should get mine soon enough then

cub3y · « **Reply #1203 on:** Sun, 17 August 2014, 17:06:07 »

Quote from: Khorne on Fri, 15 August 2014, 02:39:38

Did anyone in Australia get their one yet. if anyone in Aus bought one?

I am in New Zealand, so our orders *should* arrive around the same time. Let me know if you get yours before me (I will post as soon as mine arrived)

cub3y · « **Reply #1204 on:** Mon, 18 August 2014, 01:00:19 »

Quote from: cub3y on Sun, 17 August 2014, 17:06:07

Quote from: Khorne on Fri, 15 August 2014, 02:39:38
Did anyone in Australia get their one yet. if anyone in Aus bought one?

I am in New Zealand, so our orders *should* arrive around the same time. Let me know if you get yours before me (I will post as soon as mine arrived)

OMG its here, all the way to little ol Wellington, New Zealand! Just had fun installing the case. So damn nice.

Thanks for the candy Pexon!

PICS TO FOLLOW

Khorne · « **Reply #1205 on:** Mon, 18 August 2014, 08:13:58 »

Quote from: cub3y on Mon, 18 August 2014, 01:00:19

Quote from: cub3y on Sun, 17 August 2014, 17:06:07
Quote from: Khorne on Fri, 15 August 2014, 02:39:38
Did anyone in Australia get their one yet. if anyone in Aus bought one?

I am in New Zealand, so our orders *should* arrive around the same time. Let me know if you get yours before me (I will post as soon as mine arrived)

OMG its here, all the way to little ol Wellington, New Zealand! Just had fun installing the case. So damn nice.

Thanks for the candy Pexon!

PICS TO FOLLOW

Very nice I'll post up when it arrives in sydney. Hopefully soon fingers crossed.

eyesmiles · « **Reply #1206 on:** Mon, 18 August 2014, 13:05:48 »

Case arrived! Great packaging and thank you for the candy Pexon. The case's overall finish looks way better than the black version that came with the Pure Limited. Now ... the wait for a PCB to put in this thing.

dakuzo · « **Reply #1207 on:** Thu, 21 August 2014, 20:35:13 »

Got my case today!! Thank you for the great packaging and treats pexon!

Unknown01011010 · « **Reply #1208 on:** Fri, 22 August 2014, 09:10:02 »

Thanks for the awesome case, usb cable, and candy Pexon! Got everything when I got back!

WhiteRice · « **Reply #1209 on:** Fri, 22 August 2014, 10:29:49 »

I got my package, thank you pexon!

pexon · « **Reply #1210 on:** Fri, 22 August 2014, 12:17:01 »

Brilliant guys, glad you've all nearly got your cases. Get some pics up!

kapn91 · « **Reply #1211 on:** Fri, 22 August 2014, 16:38:41 »

Quote from: pexon on Fri, 08 August 2014, 03:16:35

Quote from: kapn91 on Thu, 07 August 2014, 21:21:30
Pexon. I still haven't had a confirmation on the cancellation of my order. I've messaged you on reddit, emailed you, now I'm here trying to get you to cancel the order. It's been two weeks now since I've requested the cancellation of my order, yet the charge still exists on my paypal.

A refund was issued last week, you should have received an email with the details? Message me here one final time and I will resolve it for you

I haven't received my refund. I thought maybe I just didn't know how to use paypal all that well, but the only thing existing that's related to pexonpcs is the charge for the amount. I don't see it paid back, nor have I received this email....

Aidenknives · « **Reply #1212 on:** Sat, 23 August 2014, 11:38:42 »

Just received my cases! Thank you so much. They are amazing. Also thanks for the candy;) You sir are a gentleman and a scholar.

cybergenx · « **Reply #1213 on:** Mon, 25 August 2014, 05:11:43 »

Thank you so much Pexon from the wizard of oz

Excellent cases, outstanding value, you are my keyboard hero!

Exroath · « **Reply #1214 on:** Mon, 25 August 2014, 06:38:28 »

Any cases left ?? Payday s Wednesday and I wouldn't mind one.

tyvar1 · « **Reply #1215 on:** Mon, 25 August 2014, 08:20:45 »

Quote from: Exroath on Mon, 25 August 2014, 06:38:28

Any cases left ?? Payday s Wednesday and I wouldn't mind one.

Yes there are still is stock

tyvar1 · « **Reply #1216 on:** Mon, 25 August 2014, 13:07:04 »

Just bought this case, sleeved USB, granite R2 keycaps set and poker II iso. Wooho!

Khorne · « **Reply #1217 on:** Mon, 25 August 2014, 19:53:39 »

Hello Pexon,

Is there any way of knowing if the package has reached Australia?

tyvar1 · « **Reply #1218 on:** Tue, 26 August 2014, 14:43:43 »

What is the dimensions of this case? The Height at the bottom(where you have your palms)
Want to know if Filco Wood Palm Rest works for it! (20 mm heigh)

chzel · « **Reply #1219 on:** Tue, 26 August 2014, 14:52:12 »

From bottom (no feet) to the front edge, just a hair under 12mm (~11,8mm)

tyvar1 · « **Reply #1220 on:** Tue, 26 August 2014, 15:00:55 »

Quote from: chzel on Tue, 26 August 2014, 14:52:12

From bottom (no feet) to the front edge, just a hair under 12mm (~11,8mm)

Thank you so much for that fast respons! The Filco Wooden wrist rest is around 20 mm and 16 mm without the feets. Do you think it will be uncomfortable?

chzel · « **Reply #1221 on:** Tue, 26 August 2014, 15:31:34 »

IMHO it will be perfect!
The case ends at the plate, so the bottom of the caps is ~4mm above that.
Add a couple of mm for case feet, and you are at ~18mm to the BOTTOM of the caps!

tyvar1 · « **Reply #1222 on:** Tue, 26 August 2014, 15:49:06 »

Quote from: chzel on Tue, 26 August 2014, 15:31:34

IMHO it will be perfect!
The case ends at the plate, so the bottom of the caps is ~4mm above that.
Add a couple of mm for case feet, and you are at ~18mm to the BOTTOM of the caps!

Awesome thanks!

Khorne · « **Reply #1223 on:** Tue, 26 August 2014, 18:14:58 »

Yay mine arrived in Sydney today. Case looks great.
Thanks so much. Love the cable also.

tlt · « **Reply #1224 on:** Wed, 27 August 2014, 09:17:57 »

Got the case today and it looks really good. Didn't get any candy (the kids took it all

)

Pep · « **Reply #1225 on:** Wed, 27 August 2014, 09:30:47 »

Anyone in Canada get one? What are the customs fees like?

01111000 · « **Reply #1226 on:** Wed, 27 August 2014, 16:36:00 »

Pexon, are you planning on offering other colors? If so, what colors do you have in mind?

beltet · « **Reply #1227 on:** Thu, 28 August 2014, 16:21:03 »

Quote from: pexon on Fri, 22 August 2014, 12:17:01

Brilliant guys, glad you've all nearly got your cases. Get some pics up!

I will, when I have got my faceU replica PCB. And soldered it.
Just a question, I haven't used a custom case before. And Just want to know what size of screws you use for this case to hold the PCB.
Sincerely

Arcoril · « **Reply #1228 on:** Thu, 28 August 2014, 17:39:55 »

I'm loving this case! The only issue I have is finding rubber feet that match the indents in the case. They measure 1 x 4 cm and I'm wondering if anyone's had any luck finding pre-cut adhesive feet in that size. I've seen big rolls of non-slip rubber for sale but I'd rather not get a huge sheet when I really just need a tiny bit.

chzel · « **Reply #1229 on:** Thu, 28 August 2014, 18:58:27 »

Quote from: beltet on Thu, 28 August 2014, 16:21:03

Just a question, I haven't used a custom case before. And Just want to know what size of screws you use for this case to hold the PCB.

It is M2 thread 4mm long.
Any half decent hardware store should have them!

ryhanson · « **Reply #1230 on:** Fri, 29 August 2014, 10:33:13 »

I would totally get this if it was in other colors! Even just a silver. With that said, this still looks like a very solid awesome case. I may end up getting it anyways

Any plans to do silver or other colors?

beltet · « **Reply #1231 on:** Sun, 31 August 2014, 01:02:55 »

Quote from: chzel on Thu, 28 August 2014, 18:58:27

Quote from: beltet on Thu, 28 August 2014, 16:21:03
Just a question, I haven't used a custom case before. And Just want to know what size of screws you use for this case to hold the PCB.

It is M2 thread 4mm long.
Any half decent hardware store should have them!

Great! Thank you. Think I have a few of them at home.

SeriouSSpotS · « **Reply #1232 on:** Mon, 01 September 2014, 08:51:51 »

Got a pretty good feeling mine has gotten lost in the post, or I gave you the wrong address but I am sure I didn't

pexon · « **Reply #1233 on:** Mon, 01 September 2014, 11:51:29 »

Quote from: SeriouSSpotS on Mon, 01 September 2014, 08:51:51

Got a pretty good feeling mine has gotten lost in the post, or I gave you the wrong address but I am sure I didn't

:O

Give me a pm man, we will sort it

SeriouSSpotS · « **Reply #1234 on:** Tue, 02 September 2014, 01:36:00 »

pexon · « **Reply #1235 on:** Tue, 02 September 2014, 02:41:08 »

If anyone has not received their 60% case yet who has ordered some of the extra cases (who came in late, after the deadline to help reach MOQ), please email davina@pexonpcs.co.uk with your order details as soon as possible.

All cases ordered from the spreadsheet should have arrived by now, the last batch went off 3 or so weeks ago.

FreeCopy · « **Reply #1236 on:** Tue, 02 September 2014, 03:03:00 »

If I don't see mine tomorrow I'll shoot an email.

Thanks, pexon.

tyvar1 · « **Reply #1237 on:** Tue, 02 September 2014, 11:57:39 »

I got mine yesterday and I ordered 7 days ago! Fast delivery and awesome note from Davina! And thank you for the candy

I haven't tried it on yet because I also just got my first 60% keyboard, the Vortex Poker II. Ordered the Pexon Case and Keyboard at the same time

Will post pictures when I have put the case on!

JustDownloadMoreRAM · « **Reply #1238 on:** Wed, 03 September 2014, 19:39:34 »

Got mine last week sometime, decided to stop being stingy with pics

A few more in this Imgur album http://imgur.com/a/V4vNZ with a bit of text.

Wonderful quality overall, really really pleased with it! Thanks for the GB

pexon · « **Reply #1239 on:** Thu, 04 September 2014, 03:52:29 »

WOW Awesome pics man.

What set up are you using?

dustinhxc · « **Reply #1240 on:** Thu, 04 September 2014, 05:06:47 »

Quote from: JustDownloadMoreRAM on Wed, 03 September 2014, 19:39:34

Got mine last week sometime, decided to stop being stingy with pics

Show Image

Show Image

A few more in this Imgur album http://imgur.com/a/V4vNZ with a bit of text.

Wonderful quality overall, really really pleased with it! Thanks for the GB

Show Image

Wow.. Beautiful! I thought I was unique w my 2 pure limited cases and now this happened.. I should get more, great price. :thumb:

JustDownloadMoreRAM · « **Reply #1241 on:** Sat, 06 September 2014, 14:37:37 »

Quote from: pexon on Thu, 04 September 2014, 03:52:29

WOW Awesome pics man.

What set up are you using?

Thanks, they were very low effort, however

For wider shots and quick pics, I generally use a Ricoh GR (last pic). The rest in the album were with a Pentax K-01 plus D-FA 100mm f/2.8 Macro WR lens

Quote from: dustinhxc on Thu, 04 September 2014, 05:06:47

Wow.. Beautiful! I thought I was unique w my 2 pure limited cases and now this happened.. I should get more, great price.

I bought a Pure Limited just for the case, but the Poker II's Space Bar stabilizers wouldn't fit inside

The quality of the Pure's case was also well below this one, referenced in the text in the Imgur album.

Vortex really smashed it with this version, my only gripe is the "apparent" gap where the front of the plate meets the case, but it's mostly an issue of parallax when you look at it. 9.8/10 on quality! For the price, it would be crazy to pass it up.

pexon · « **Reply #1242 on:** Sat, 06 September 2014, 15:21:59 »

Damn, I want a new camera, stop tempting me!

The macro shots are great, razor sharp

madhias · « **Reply #1243 on:** Mon, 08 September 2014, 10:42:09 »

Hope i'll get my case soon, it's the last part missing for my first 60% project.

tyvar1 · « **Reply #1244 on:** Sat, 13 September 2014, 12:33:17 »

Wow, just wow! Thank you so much for this case Pexon!

It is so heavy and feels so much more luxury!
Some pictures:

I just love the floating keys!

More pics:
http://imgur.com/a/qJbBl

madhias · « **Reply #1245 on:** Mon, 15 September 2014, 14:06:36 »

Seeing all these cases make me jealous and i hope i get my case soon! Long time waiting

tyvar1 · « **Reply #1246 on:** Thu, 18 September 2014, 04:22:56 »

Quote from: madhias on Mon, 15 September 2014, 14:06:36

Seeing all these cases make me jealous and i hope i get my case soon! Long time waiting

News:

Author Topic: [GB] $60 60% case (Aluminium) (SHIPPING - 99% DISPATCHED! :O ) (Read 247179 times)