[IC] - Ti switch tool finish

[The_Beast]

Top is A (picture 1): no extra finishing, laser cut edges, rough sanded finish from the laser cutter, some blow out around the holes

Bottom is B (picture 1): hand sanded by me, extra costs ($7), the inside forks won't be sanded since they're hard to get to, looks a lot like darker brushed stainless



Vote in the comments below.

[Pacifist]

B!!!!

[Flyersfan1]

In for B as well, they look awesome!

[CommonCurt]

B

[SpAmRaY]

What's the cost to start with?

[strict]

I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

[CommonCurt]

Will there be a option to have them bent?

[geniekid]

+1 for B, although I'd still be all over A.  I was literally in the middle of making a classified post for switch tools when I read this post

[Zeal]

Option B.

So are switch tools coming real soon™? 

[The_Beast]

I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded


The base price w/o is $25 and they will be bent

[Cottonsox]

Option B, would buy both tho.

[strict]

I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded


The base price w/o is $25 and they will be bent

Option B was my first choice thinking it would be the only option with sanded legs, but if they will both sanded I would be totally content with either. I would still probably go with B but definitely would not be disappointed by A.

[CommonCurt]

I'm partial to B as well. Is there any usability difference having the legs sanded down as seen in B? What would the base cost be (roughly) that could then have $7 added on to?

Since the ti stock was 14 guage, they need to be sanded down to fit into the switch tops. The legs no mater the finish option will need to be sanded


The base price w/o is $25 and they will be bent

Option B was my first choice thinking it would be the only option with sanded legs, but if they will both sanded I would be totally content with either. I would still probably go with B but definitely would not be disappointed by A.

+1  ^same thing^

[tbc]

B please

is this like a vote for everyone to get one finish or just to quickly gauge the ratio of orders?

[The_Beast]

B please

is this like a vote for everyone to get one finish or just to quickly gauge the ratio of orders?

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

[strict]

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

[jorgenslee]

A for me if this have sanded legs, if not definitely B.

[The_Beast]

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)

[Pacifist]

If I miss this sale I'll be so pissed...

[Cottonsox]

Pretty sure I am going to miss it, moving soon and going to be awol a while. Someone snap me up a set! !

[quochung1989]

I 'm in B with bent

First time, when i see OP, i thought that there isn't bent tool, just have flat tool. But after i read this thread, I think this is great sale 
I hope you 'll sale it on classified asap

[infiniti]

**SNIP*** RIP old image hosting

[TLSC.wipeOut]

I like option B =)

[Crabby_b]

I would be in for option B.

[zflamewing]

I'd be in for a set of B bent as well.

[CPTBadAss]

B for Badass

[LechnerDE]

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)

Will you do the sale in the Group Buy subforum?

I missed the last sale because it was in your thread in the classified section :(

[The_Beast]

I'm thinking everyone gets the majority option. I want these ready to ship once the sale is up

Show Image

After missing out on the 420 sales I will be totally defeated if I miss out on these too, I've been looking forward to this for months! Any rough ETA on when we might see the sale? If you're not comfortable giving a date yet thats totally understandable.

They'll be ready when I'm done. I can't give solid dates since my schedule is always changing (due to college n stuff)

Will you do the sale in the Group Buy subforum?

I missed the last sale because it was in your thread in the classified section :(

More than likely classifieds again since I'm just outright selling them without collecting first.

[LechnerDE]

Thanks for the last reply!

Please announce the sale in this IC thread so I know when to look for it. Normally I don't browse the classifieds because most of the stuff is sold CONUS only...

[pichu23]

I'm interested in the tools. I guess any finish would be fine for me. So majority wins

[Lastpilot]

B!

[exitfire401]

Also gnona go with B with bent

[quake4mhg]

I missed switch tool GB few times before, I can't miss this one
If not too expensive, interested whichever you guys want.

[minho]

I missed switch tool GB few times before, I can't miss this one
If not too expensive, interested whichever you guys want.

ditto

[ninjadoc]

B

[Vibex]

B

[FreeCopy]

B!

[SaySo]

Option B 

[Kfactork]

Option B looks good!

[JaccoW]

I'm in for option B.

Could I reserve one?

[Zeal]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

[strict]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

[The_Beast]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

[geniekid]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Thanks for this beast.

[CommonCurt]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Only 30 sets?    Gonna have to be quick to the draw.

[minho]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Sorry, what's SS mean?

[Pacifist]

Any word on how many will be made? Lots of people on GH would be down to buy at least a pair of switch tools. It would be great if it became a staple item here. 

I believe in another thread The_Beast mentioned that 65 tools total were cut so Im going to guess ~35 sets will be produced. The people who ordered the 60% Ti plates got dibs on a set so the rest of us will probably see more like ~30 go up for sale.

Exactly. If I sell out, I'll think about another SS round

Sorry, what's SS mean?

stainles steel

[quochung1989]

Oh i am very interested both titan & ss switch tool 

[QuadGMoto]

B!

[minho]

Is this still projected to happen in a future date, or did I miss the thread?