Author Topic: [IC] - Ti switch tool finish (Read 16260 times)

taylordcraig · « **Reply #50 on:** Mon, 12 May 2014, 21:46:34 »

would love one set of B.
please and thank you.
dont let me miss this.

PhineasRex · « **Reply #51 on:** Sun, 25 May 2014, 09:39:45 »

"B" is the only option for me. Any estimate on when these will go on sale?

promptcurry · « **Reply #52 on:** Sun, 25 May 2014, 20:13:14 »

Option B for me. (if its still possible)

minho · « **Reply #53 on:** Wed, 28 May 2014, 18:08:04 »

Quote from: promptcurry on Sun, 25 May 2014, 20:13:14

Option B for me. (if its still possible)

Will this be going up anytime soon? (Sorry my intention isn't to rush this - just want to know whether or not I should start hunting around on classifieds or not).

The_Beast · « **Reply #54 on:** Wed, 28 May 2014, 19:27:41 »

Pretty much when I have time... no solid ETA

minho · « **Reply #55 on:** Wed, 28 May 2014, 22:36:20 »

Quote from: The_Beast on Wed, 28 May 2014, 19:27:41

Pretty much when I have time... no solid ETA

Okie dokie, thanks!

quochung1989 · « **Reply #56 on:** Thu, 29 May 2014, 02:42:27 »

Yeah i still wait it everyday

strict · « **Reply #57 on:** Thu, 29 May 2014, 08:17:22 »

Quote from: quochung1989 on Thu, 29 May 2014, 02:42:27

Yeah i still wait it everyday

I stay signed into GH on my phone with a browser tab always open to The_Beast's post history and check it all the time. I'm determined not to miss these when they go up for sale.

)

feizor · « **Reply #58 on:** Thu, 29 May 2014, 08:26:15 »

I'm up for one too if the price is right. How hard is it to open a switch without this tool?

BlackDragonTribal · « **Reply #59 on:** Thu, 29 May 2014, 10:15:14 »

Quote from: strict on Thu, 29 May 2014, 08:17:22

Quote from: quochung1989 on Thu, 29 May 2014, 02:42:27
Yeah i still wait it everyday

I stay signed into GH on my phone with a browser tab always open to The_Beast's post history and check it all the time. I'm determined not to miss these when they go up for sale. )

Yeah. I miss stainless steel switch tool. So i can't miss this tools

Quote from: feizor on Thu, 29 May 2014, 08:26:15

I'm up for one too if the price is right. How hard is it to open a switch without this tool?

You 'll know when you remove top housing switch on openable plate. I usually two tweezer curved, but it have more step to do that. After long time, you 'll feel tired & your act is not exactly. You 'll make copper plate curve....
Therefore i must be buy switch tools

FrostyToast · « **Reply #60 on:** Thu, 29 May 2014, 12:09:37 »

I would so be in for option B. I'm going to need something to open up my sprit keyboard.

Crabby_b · « **Reply #61 on:** Mon, 02 June 2014, 09:59:25 »

Any idea when this is going to be available?

quochung1989 · « **Reply #62 on:** Mon, 02 June 2014, 10:00:24 »

Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25

Any idea when this is going to be available?

Nope. It is not available

CPTBadAss · « **Reply #63 on:** Mon, 02 June 2014, 10:07:33 »

Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25

Any idea when this is going to be available?

Quote from: The_Beast on Wed, 28 May 2014, 19:27:41

Pretty much when I have time... no solid ETA

Crabby_b · « **Reply #64 on:** Mon, 02 June 2014, 10:11:03 »

Quote from: CPTBadAss on Mon, 02 June 2014, 10:07:33

Quote from: Crabby_b on Mon, 02 June 2014, 09:59:25
Any idea when this is going to be available?

Quote from: The_Beast on Wed, 28 May 2014, 19:27:41
Pretty much when I have time... no solid ETA

I guess reading through older posts would help... Thanks!

Heliosphere · « **Reply #65 on:** Sun, 15 June 2014, 01:57:26 »

Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?

hwood34 · « **Reply #66 on:** Sun, 15 June 2014, 02:05:31 »

Quote from: Heliosphere on Sun, 15 June 2014, 01:57:26

Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?

Depends on the type of plate

Razor Lotus · « **Reply #67 on:** Sun, 15 June 2014, 10:54:12 »

Quote from: Heliosphere on Sun, 15 June 2014, 01:57:26

Can these only be used to open pcb-mounted switches or would they work with plate mounted ones too?

You need the plate with special notches at the side of each switch slot to be able to use these switch tools on plate mounted switches

The_Beast · « **Reply #68 on:** Sat, 21 June 2014, 02:51:14 »

How about a sand blasted finish instead of a B finish?

It has a slight grippyness to it.

Cottonsox · « **Reply #69 on:** Sat, 21 June 2014, 02:56:26 »

That would be cool also! I am in for whatever is made. Really need some seitch tools for my upcoming builds

strict · « **Reply #70 on:** Sat, 21 June 2014, 07:26:31 »

Sandblasted finish looks great. Honestly, I would probably chose that over anything else based simply on the fact you said it's easier to grip. When you're working with smaller tools and parts like these any little bit of extra grip really helps. If I get a set I was actually considering putting plasti-dip on the top part of the tool for that reason.

quochung1989 · « **Reply #71 on:** Sat, 21 June 2014, 08:12:18 »

Look it is great

Sanding layer is smooth. I only guess via photo

Zeal · « **Reply #72 on:** Sat, 21 June 2014, 08:15:54 »

I'm afraid sandblasted finish will scratch the inside tabs on an MX switch.

osi · « **Reply #73 on:** Sat, 21 June 2014, 09:33:52 »

Not only are these tools good for switches but I use them to get into all kinds of things! Great addition to any tool set/bag!

Razor Lotus · « **Reply #74 on:** Sat, 21 June 2014, 10:34:46 »

So... when will they be made? lol

FrostyToast · « **Reply #75 on:** Sat, 21 June 2014, 16:02:04 »

I just want tools. Gimme tools!

The_Beast · « **Reply #76 on:** Sat, 28 June 2014, 08:26:56 »

Quote from: Zeal on Sat, 21 June 2014, 08:15:54

I'm afraid sandblasted finish will scratch the inside tabs on an MX switch.

I blasted another one last night and tested them, I didn't see any indication of scratching.

That being said, the sale should be soon™

strict · « **Reply #77 on:** Sat, 28 June 2014, 08:38:04 »

Quote from: The_Beast on Sat, 28 June 2014, 08:26:56

That being said, the sale should be soon™

LechnerDE · « **Reply #78 on:** Sat, 28 June 2014, 08:40:19 »

I hope I don't miss the sale!

again....

quochung1989 · « **Reply #79 on:** Sat, 28 June 2014, 08:44:39 »

I hope that. Wait too long

clacktalk · « **Reply #80 on:** Sat, 19 July 2014, 16:29:39 »

I've heard wonderful things about these tools. I'm interested! I hope me posting here is cool haha

The_Beast · « **Reply #81 on:** Sat, 19 July 2014, 18:26:56 »

Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.

strict · « **Reply #82 on:** Sat, 19 July 2014, 18:42:43 »

Quote from: The_Beast on Sat, 19 July 2014, 18:26:56

Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.

Great news! Appreciate the hard work, Beast

FrostyToast · « **Reply #83 on:** Sat, 19 July 2014, 18:48:26 »

Quote from: The_Beast on Sat, 19 July 2014, 18:26:56

Some stuff came up, but I'm still working on them!

Right now, I have about 7 sets done.

heedpantsnow · « **Reply #84 on:** Sat, 19 July 2014, 19:11:23 »

I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.

Flyersfan1 · « **Reply #85 on:** Sat, 19 July 2014, 19:20:02 »

Quote from: heedpantsnow on Sat, 19 July 2014, 19:11:23

I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.

If memory serves, I believe it's going to be a first come first serve sale, nothing you have to reserve a spot for.

The_Beast · « **Reply #86 on:** Sat, 19 July 2014, 19:33:42 »

Quote from: Flyersfan1 on Sat, 19 July 2014, 19:20:02

Quote from: heedpantsnow on Sat, 19 July 2014, 19:11:23
I could have sworn I said at some point "I'm in for a finished set" but now I can't find it. Is it too late? If not, I'm in.
If memory serves, I believe it's going to be a first come first serve sale, nothing you have to reserve a spot for.

Yes, however, if you participated in the ti plate buy I ran, they DO get preference since I wasn't able to get these done at the same time as their plates.

Other than that, first come first serve

Heliosphere · « **Reply #87 on:** Sun, 20 July 2014, 00:24:07 »

Same, I want one!

CommonCurt · « **Reply #88 on:** Sun, 20 July 2014, 01:38:44 »

I had almost forgotten about these. I still am definitely interested.

querolous · « **Reply #89 on:** Thu, 24 July 2014, 03:29:25 »

I am interested in a set

JaccoW · « **Reply #90 on:** Thu, 24 July 2014, 04:32:03 »

Still interested as well

The_Beast · « **Reply #91 on:** Sat, 26 July 2014, 19:50:39 »

34 done, 26 to go

FrostyToast · « **Reply #92 on:** Sat, 26 July 2014, 19:54:24 »

I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching...

The_Beast · « **Reply #93 on:** Sat, 26 July 2014, 19:55:48 »

Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24

I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching...

Hawks are cool, but sloths are cooler....

Flyersfan1 · « **Reply #94 on:** Sat, 26 July 2014, 19:56:51 »

Quote from: The_Beast on Sat, 26 July 2014, 19:55:48

Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching...

Hawks are cool, but sloths are cooler....

Looking great Beast!

asdfjkl36 · « **Reply #95 on:** Sat, 26 July 2014, 19:57:55 »

Quote from: The_Beast on Sat, 26 July 2014, 19:55:48

Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching...

Hawks are cool, but sloths are cooler....

So the last person to say they want one is actually the first on the list. Got it

strict · « **Reply #96 on:** Sat, 26 July 2014, 20:00:35 »

Quote from: The_Beast on Sat, 26 July 2014, 19:50:39

34 done, 26 to go

Show Image

My biggest fear in life right now is that I will miss the glorious moment when these go on sale.

clacktalk · « **Reply #97 on:** Sat, 26 July 2014, 20:01:52 »

Quote from: The_Beast on Sat, 26 July 2014, 19:50:39

34 done, 26 to go

Show Image

Taylor Swift's You Belong With Me plays in my head when I gaze at these.

FrostyToast · « **Reply #98 on:** Sat, 26 July 2014, 20:01:57 »

Quote from: The_Beast on Sat, 26 July 2014, 19:55:48

Quote from: FrostyToast on Sat, 26 July 2014, 19:54:24
I am going to watch this thread like a hawk for when you start to sell those... Or rather I will watch like a sleepy hawk who likes to take rests often and occasionally eat and forgetting about things that need watching...

Hawks are cool, but sloths are cooler....

So you're saying you want a slo fi for those switch tools? You drive a hard bargain...

JaccoW · « **Reply #99 on:** Sat, 26 July 2014, 20:43:56 »

Scary sloth is coming for your switch tools

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: [IC] - Ti switch tool finish (Read 16260 times)