Author Topic: [IC] Duck Viper and Eagle (Read 86989 times)

MrChunky · « **Reply #400 on:** Fri, 18 July 2014, 03:22:12 »

Quote from: Xenderwind on Fri, 18 July 2014, 02:35:58

Quote from: StylinGreymon on Fri, 18 July 2014, 02:27:54
So I found a local shop that might make me some acrylic inserts for both the Light Pad and the Viper, but what do I need to give them, just the .dxf flle Duck posted on his site?
Will they know what to do with that, because I sure as hell don't...
I don't know if we know the thickness of them. But the files show the profile of them so if we knew the thickness it shouldnt be hard. You would just tell him which ones you wanted (theres 4 on the file) and how many probably.

The thickness may be what 10T and 12T are but thats just a guess.

It seems they are 12T (http://kbdlab.co.kr/index.php?mid=board_tune&document_srl=153206), but might be different with V2. DXF can be opened with autocad or converted, they should be fine.

Xenderwind · « **Reply #401 on:** Fri, 18 July 2014, 03:51:38 »

Quote from: MrChunky on Fri, 18 July 2014, 03:22:12

Quote from: Xenderwind on Fri, 18 July 2014, 02:35:58
Quote from: StylinGreymon on Fri, 18 July 2014, 02:27:54
So I found a local shop that might make me some acrylic inserts for both the Light Pad and the Viper, but what do I need to give them, just the .dxf flle Duck posted on his site?
Will they know what to do with that, because I sure as hell don't...
I don't know if we know the thickness of them. But the files show the profile of them so if we knew the thickness it shouldnt be hard. You would just tell him which ones you wanted (theres 4 on the file) and how many probably.

The thickness may be what 10T and 12T are but thats just a guess.

It seems they are 12T (http://kbdlab.co.kr/index.php?mid=board_tune&document_srl=153206), but might be different with V2. DXF can be opened with autocad or converted, they should be fine.

What I meant was I have no idea what 10T and 12T mean. I just assumed it was some form of a measurement of thickness. I would guess it just means mm thick but I would prefer if someone more knowledgeable (or with one of these boards) would confirm.

MrChunky · « **Reply #402 on:** Fri, 18 July 2014, 04:00:48 »

I can check when I get home in a couple of hours, or maybe someone is quicker

JaccoW · « **Reply #403 on:** Fri, 18 July 2014, 04:33:19 »

From other posts, especially the Orion base plate it seems like this does mean the thickness in mm. I have sent the files to a company nearby to ask for a quote as well.
T = Thickness?
12T = 12mm

jorgenslee · « **Reply #404 on:** Mon, 21 July 2014, 02:45:13 »

Does the layout of the PCB of Viper has been posted yet? I was planning to get sprit's 60% Acrylic plate, cut it and put it on the viper. Is that possible?

Xenderwind · « **Reply #405 on:** Mon, 21 July 2014, 03:02:47 »

Quote from: jorgenslee on Mon, 21 July 2014, 02:45:13

Does the layout of the PCB of Viper has been posted yet? I was planning to get sprit's 60% Acrylic plate, cut it and put it on the viper. Is that possible?

No idea if it is possible, I wouldn't count on it personally. The pcb was posted a couple pages back though

should be the middle one.

StylinGreymon · « **Reply #406 on:** Mon, 21 July 2014, 03:07:37 »

I might be reading too much into it, Xenderwind, but you seem to be watching this thread as obsessively as me

jorgenslee · « **Reply #407 on:** Mon, 21 July 2014, 03:11:54 »

Quote from: Xenderwind on Mon, 21 July 2014, 03:02:47

Quote from: jorgenslee on Mon, 21 July 2014, 02:45:13
Does the layout of the PCB of Viper has been posted yet? I was planning to get sprit's 60% Acrylic plate, cut it and put it on the viper. Is that possible?
No idea if it is possible, I wouldn't count on it personally. The pcb was posted a couple pages back though
Show Image

should be the middle one.

I see. Thanks. It might be worth a try though seeing acrylic can be easily modified.

Xenderwind · « **Reply #408 on:** Mon, 21 July 2014, 03:28:00 »

Quote from: StylinGreymon on Mon, 21 July 2014, 03:07:37

I might be reading too much into it, Xenderwind, but you seem to be watching this thread as obsessively as me

Haha, yeah I'm pretty excited XD. I've been using tkl for so long and just recently got a 60% besides my hhkb and realized how much I like the layout. Also realized how much I love 65g blues, especially the part where I don't have to bother lubing them. Sad to see my GON going to get replaced though...might eventually have to sell it.

Quote from: jorgenslee on Mon, 21 July 2014, 03:11:54

Quote from: Xenderwind on Mon, 21 July 2014, 03:02:47
Quote from: jorgenslee on Mon, 21 July 2014, 02:45:13
Does the layout of the PCB of Viper has been posted yet? I was planning to get sprit's 60% Acrylic plate, cut it and put it on the viper. Is that possible?
No idea if it is possible, I wouldn't count on it personally. The pcb was posted a couple pages back though
Show Image

should be the middle one.

I see. Thanks. It might be worth a try though seeing acrylic can be easily modified.

It very well might work. To be honest I didn't look too much into the layout of the pcb and the plates from Sprit. If I had to make a quick judgement I can see a few problems with the screw placement being off (at least thats what I assume those holes are for on the pcb). For instance the one right below I believe its keys 6 and 7. The screw hole for the sprit plate is actually between the switches instead. I can see the same being a problem for the one by the enter key and maybe the shift one at the very least.

jorgenslee · « **Reply #409 on:** Mon, 21 July 2014, 03:41:35 »

Quote from: Xenderwind on Mon, 21 July 2014, 03:28:00

It very well might work. To be honest I didn't look too much into the layout of the pcb and the plates from Sprit. If I had to make a quick judgement I can see a few problems with the screw placement being off (at least thats what I assume those holes are for on the pcb). For instance the one right below I believe its keys 6 and 7. The screw hole for the sprit plate is actually between the switches instead. I can see the same being a problem for the one by the enter key and maybe the shift one at the very least.

Yeah, you are right. Upon checking the plate I have, there is no single hole I can see that would match the one on Viper's PCB.

Vintage · « **Reply #410 on:** Wed, 23 July 2014, 17:49:41 »

Does anyone know what if we should but plate mounted or pcb mounted stabs for the viper and eagle plates? I assume plate mounted but I'm not sure.

LONGZILLA · « **Reply #411 on:** Wed, 23 July 2014, 17:51:34 »

Quote from: Vintage on Wed, 23 July 2014, 17:49:41

Does anyone know what if we should but plate mounted or pcb mounted stabs for the viper and eagle plates? I assume plate mounted but I'm not sure.

wut?

Plate

Vintage · « **Reply #412 on:** Wed, 23 July 2014, 18:11:03 »

thx. I thought some korean boards used pcb mount for some reason.

pasph · « **Reply #413 on:** Wed, 23 July 2014, 18:12:49 »

Usually Korean custom kbs use pcb mount stabs

keyit · « **Reply #414 on:** Wed, 23 July 2014, 18:14:30 »

based on the pictures of the pcbs, id also think they use pcb mount stabs

LONGZILLA · « **Reply #415 on:** Wed, 23 July 2014, 19:08:49 »

*double checks board* yup, you're all right, PCB mount stabs

Vintage · « **Reply #416 on:** Wed, 23 July 2014, 19:23:03 »

xD I knew I read that somewhere.

elton5354 · « **Reply #417 on:** Wed, 23 July 2014, 20:46:58 »

Quote from: Xenderwind on Fri, 18 July 2014, 03:51:38

Quote from: MrChunky on Fri, 18 July 2014, 03:22:12
Quote from: Xenderwind on Fri, 18 July 2014, 02:35:58
Quote from: StylinGreymon on Fri, 18 July 2014, 02:27:54
So I found a local shop that might make me some acrylic inserts for both the Light Pad and the Viper, but what do I need to give them, just the .dxf flle Duck posted on his site?
Will they know what to do with that, because I sure as hell don't...
I don't know if we know the thickness of them. But the files show the profile of them so if we knew the thickness it shouldnt be hard. You would just tell him which ones you wanted (theres 4 on the file) and how many probably.

The thickness may be what 10T and 12T are but thats just a guess.

It seems they are 12T (http://kbdlab.co.kr/index.php?mid=board_tune&document_srl=153206), but might be different with V2. DXF can be opened with autocad or converted, they should be fine.
Show Image

What I meant was I have no idea what 10T and 12T mean. I just assumed it was some form of a measurement of thickness. I would guess it just means mm thick but I would prefer if someone more knowledgeable (or with one of these boards) would confirm.

Yeah, that's the thickness of the insert in mm

Light Pad's

osi · « **Reply #418 on:** Thu, 24 July 2014, 08:26:59 »

Hi Elton -- what would be your latest prediction for the start of the group buy for the viper/eagle kits??

inb4 - 'after lightsaver group buy'.

I'm actually glad this buy is slightly delayed. Allows me more time to get my paltry finances in order

StylinGreymon · « **Reply #419 on:** Mon, 28 July 2014, 02:42:08 »

When desu ka?

elton5354 · « **Reply #420 on:** Tue, 29 July 2014, 21:19:38 »

I'll create the group buy tomorrow.

They already have 70 units ready for us. Just needs to be anodized.

Zeal · « **Reply #421 on:** Tue, 29 July 2014, 21:20:49 »

#HYPE

asassdsd · « **Reply #422 on:** Tue, 29 July 2014, 21:21:38 »

OMG OMG IM TRIPPING SO HARD

StylinGreymon · « **Reply #423 on:** Tue, 29 July 2014, 21:26:34 »

YESSSSSSSS

How long does it take to anodize something?

osi · « **Reply #424 on:** Tue, 29 July 2014, 21:30:43 »

my word

Xenderwind · « **Reply #425 on:** Tue, 29 July 2014, 21:32:40 »

Quote from: elton5354 on Tue, 29 July 2014, 21:19:38

I'll create the group buy tomorrow.

They already have 70 units ready for us. Just needs to be anodized.

What?!?! That will speed up everything so much! Thanks elton!

keyit · « **Reply #426 on:** Tue, 29 July 2014, 21:34:35 »

Quote from: elton5354 on Tue, 29 July 2014, 21:19:38

I'll create the group buy tomorrow.

They already have 70 units ready for us. Just needs to be anodized.

AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH. im ready.

SpAmRaY · « **Reply #427 on:** Tue, 29 July 2014, 21:36:45 »

Must resist.....

StylinGreymon · « **Reply #428 on:** Tue, 29 July 2014, 21:37:09 »

Give in.

cooldiscretion · « **Reply #429 on:** Tue, 29 July 2014, 21:39:15 »

Mod Edit: fixed the image link.

Vintage · « **Reply #430 on:** Tue, 29 July 2014, 22:30:25 »

SUPER EXCITED! Hopefully the form will be up before work tomorrow

minho · « **Reply #431 on:** Tue, 29 July 2014, 23:20:59 »

Damn I'm pumped.

jorgenslee · « **Reply #432 on:** Tue, 29 July 2014, 23:46:35 »

Hopefully there is no shortage seeing there is interest of 150 and only 70 available as of the moment.

StylinGreymon · « **Reply #433 on:** Tue, 29 July 2014, 23:54:55 »

Yeah, I hope the buy is up before I go to work.
As long as I've been on top of this, it would kill me to be in the 2nd batch.

HoffmanMyster · « **Reply #434 on:** Wed, 30 July 2014, 00:55:08 »

I AM SO READY FOR THIS.

Zeal · « **Reply #435 on:** Wed, 30 July 2014, 01:36:32 »

Quote from: HoffmanMyster on Wed, 30 July 2014, 00:55:08

I AM SO READY FOR THIS.

YOU ALREADY HAVE 2 LIGHTSABERS

tjweir · « **Reply #436 on:** Wed, 30 July 2014, 07:25:24 »

My body and wallet are ready!

HoffmanMyster · « **Reply #437 on:** Wed, 30 July 2014, 08:10:02 »

Quote from: Zeal on Wed, 30 July 2014, 01:36:32

Quote from: HoffmanMyster on Wed, 30 July 2014, 00:55:08
I AM SO READY FOR THIS.

YOU ALREADY HAVE 2 LIGHTSABERS

I only have one! I'm just being taunted by the other one.

And all the more reason for me to be excited about Viper! I can see the beauty...

elton5354 · « **Reply #438 on:** Wed, 30 July 2014, 08:13:18 »

Won't be up until tonight. I don't know what time you guys work, but I work during the day.

I will be collecting payments right away as I think this will make this group buy a little faster and keep the buyers committed.

osi · « **Reply #439 on:** Wed, 30 July 2014, 08:32:18 »

Quote from: elton5354 on Wed, 30 July 2014, 08:13:18

Won't be up until tonight. I don't know what time you guys work, but I work during the day.

I will be collecting payments right away as I think this will make this group buy a little faster and keep the buyers committed.

How long are you planning for the payment window to be?

minho · « **Reply #440 on:** Wed, 30 July 2014, 10:43:38 »

Quote from: elton5354 on Wed, 30 July 2014, 08:13:18

Won't be up until tonight. I don't know what time you guys work, but I work during the day.

I will be collecting payments right away as I think this will make this group buy a little faster and keep the buyers committed.

Well if you have their money, I would certainly assume they are committed...

Is pricing the same as estimated in the IC? about $220 per PCB/case + shipping?

Rewind · « **Reply #441 on:** Wed, 30 July 2014, 12:45:20 »

The hype is real.

Anyone in EU offering assembly service for this buy?

epzy · « **Reply #442 on:** Wed, 30 July 2014, 12:46:29 »

Quote from: Rewind on Wed, 30 July 2014, 12:45:20

The hype is real.

Anyone in EU offering assembly service for this buy?

http://geekhack.org/index.php?topic=50048.0

pmh1410 · « **Reply #443 on:** Wed, 30 July 2014, 12:57:18 »

I hope that Duck0113 will make Red color

Rewind · « **Reply #444 on:** Wed, 30 July 2014, 13:08:54 »

Quote from: epzy on Wed, 30 July 2014, 12:46:29

Quote from: Rewind on Wed, 30 July 2014, 12:45:20
The hype is real.

Anyone in EU offering assembly service for this buy?

http://geekhack.org/index.php?topic=50048.0

Awesome, thanks mate! [I'm blind

)]

Fnzzy · « **Reply #445 on:** Wed, 30 July 2014, 13:32:55 »

Quote

I'll create the group buy tomorrow.

They already have 70 units ready for us.

Quote

I will be collecting payments right away as I think this will make this group buy a little faster

It is everything I have ever hoped for! Really excited for this, first korean

elton5354 · « **Reply #446 on:** Wed, 30 July 2014, 22:24:00 »

I've posted it a couple hours ago. It just needs to be approved by the mods.

keyit · « **Reply #447 on:** Wed, 30 July 2014, 22:28:42 »

can't hold back my excitement.

HoffmanMyster · « **Reply #448 on:** Wed, 30 July 2014, 22:34:58 »

Go go go! I may have already submitted my order.

Zeal · « **Reply #449 on:** Thu, 31 July 2014, 02:35:31 »

Quote from: HoffmanMyster on Wed, 30 July 2014, 22:34:58

Go go go! I may have already submitted my order.

I bet Hoff placed first dibs before placing his order!

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: [IC] Duck Viper and Eagle (Read 86989 times)