Author Topic: Cherry Stabilizers + MX blacks PCB (Read 112999 times)

Vitaly · « **Reply #250 on:** Tue, 19 August 2014, 21:53:37 »

Sent money

Synjin · « **Reply #251 on:** Tue, 19 August 2014, 22:05:17 »

Paid off the invoice. ^_^

quake4mhg · « **Reply #252 on:** Tue, 19 August 2014, 23:58:16 »

Paid. Thanks lot Ivan

TLSC.wipeOut · « **Reply #253 on:** Wed, 20 August 2014, 01:02:45 »

Paid. Can't wait for my stabs + DOLCH~!!!!

cmadrid · « **Reply #254 on:** Wed, 20 August 2014, 02:57:34 »

Will be paid tomorrow (21st) soon as paycheck comes in

Krinto · « **Reply #255 on:** Wed, 20 August 2014, 02:59:40 »

Paid. First GB (and post i think)

Now just to work out which 60% board to get from the running buys...

Synjin · « **Reply #256 on:** Wed, 20 August 2014, 05:47:02 »

Quote from: Krinto on Wed, 20 August 2014, 02:59:40

Paid. First GB (and post i think) Now just to work out which 60% board to get from the running buys...

You can always get a viper or eagle like I did

Synjin · « **Reply #257 on:** Wed, 20 August 2014, 05:47:58 »

Ivan is it possible to order more and get a second invoice

JaccoW · « **Reply #258 on:** Wed, 20 August 2014, 06:43:01 »

Paid. I think I am probably in 4 of your running GB's right now. Can't wait to see all of them show up.

Oobly · « **Reply #259 on:** Wed, 20 August 2014, 06:58:47 »

All paid up... It's going to be a happy day in my house when all my "Ivan" stuff arrives!

bubuchacha251 · « **Reply #260 on:** Wed, 20 August 2014, 08:01:22 »

Paid!

Oobly · « **Reply #261 on:** Wed, 20 August 2014, 08:09:26 »

Just noticed something interesting on the boards. The left Shift, Enter and \| switches are mounted sideways. AFAIK, Cherry keycaps don't fit properly on a sideways switch, at least I know my SP DCS caps don't (the "vertical" slot is too short and thin to fit on the "horizontal" bar of the cross). It doesn't really bother me since I'm going to be harvesting the switches, but I thought I'd point it out.

Synjin · « **Reply #262 on:** Wed, 20 August 2014, 08:26:29 »

Ivan i would like to add two Cherry stabilizer 6.25 PCB and five Cherry stabilizer 2.x PCB to my order. Can I get an invoice for these and is it possible for them to ship together with my previous order I placed and paid for?

IvanIvanovich · « **Reply #263 on:** Wed, 20 August 2014, 11:17:08 »

Using Cherry caps sideways switch is no problem. I have sideways switch on my GH60 rev A model, and even had a keyboard once where every switch was that way that came with Cherry doubleshot. Maybe it's a problem on other manufacturer keycap, I don't know since I haven't tried it with imsto or Leopolds since neither sets fit my GH60 100%.

LechnerDE · « **Reply #264 on:** Wed, 20 August 2014, 11:45:22 »

Quote from: Fnzzy on Tue, 19 August 2014, 09:42:39

Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?

How much were you charged?

My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable

Paid!

Oobly · « **Reply #265 on:** Wed, 20 August 2014, 11:58:58 »

Ah, just realised it was the Keycool PBT caps that didn't fit sideways. SP DCS caps do fit no problem, as do Cherry brand caps. So it's not an issue.

Fnzzy · « **Reply #266 on:** Wed, 20 August 2014, 13:18:03 »

Quote from: LechnerDE on Wed, 20 August 2014, 11:45:22

Quote from: Fnzzy on Tue, 19 August 2014, 09:42:39
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?

How much were you charged?

My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable

Paid!

I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast

christkind · « **Reply #267 on:** Wed, 20 August 2014, 13:24:31 »

Hey, I am on vacation right now. Due to spotty and expensive WiFi I probably can't pay till Saturday.would that still be possible? Sorry for the inconvenience.

LechnerDE · « **Reply #268 on:** Wed, 20 August 2014, 13:54:14 »

Quote from: Fnzzy on Wed, 20 August 2014, 13:18:03

Quote from: LechnerDE on Wed, 20 August 2014, 11:45:22
Quote from: Fnzzy on Tue, 19 August 2014, 09:42:39
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?

How much were you charged?

My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable

Paid!

I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast

Ah ok, so you are now down to 2$ as well or nothing at all?

Fnzzy · « **Reply #269 on:** Wed, 20 August 2014, 14:32:26 »

Quote from: LechnerDE on Wed, 20 August 2014, 13:54:14

Quote from: Fnzzy on Wed, 20 August 2014, 13:18:03
Quote from: LechnerDE on Wed, 20 August 2014, 11:45:22
Quote from: Fnzzy on Tue, 19 August 2014, 09:42:39
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?

How much were you charged?

My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable

Paid!

I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast

Ah ok, so you are now down to 2$ as well or nothing at all?

No shipping cost at all.

IvanIvanovich · « **Reply #270 on:** Wed, 20 August 2014, 14:43:06 »

Shipping cost is a bit tricky... checking 3 other sheets and then determining if already paid postage from prior buys covers weight bumps based on what you ordered here. For the most part there should be no additional shipping for 1-3 sets of stabs. 4+ sets may or may not have small amount additional shipping depending on which buy(s) you are also in that will be combined shipped and how much the postage there was. 6+ sets will have some additional shipping fee. PCB will absolutely have an additional shipping fee since it is heavy.
Mistakes were bound to happen and have. If you feel I am wrong don't hesitate to bring it to my attention BEFORE you pay as it is a little easier for me.

Synjin · « **Reply #271 on:** Wed, 20 August 2014, 17:48:21 »

Ivan I posted earlier asking if I could possibly make an addition to my order because I want to build an eagle set and I don't have enough stabilizers. I don't mind paying extra for shipping if it will bump it to a certain amount.

cmadrid · « **Reply #272 on:** Thu, 21 August 2014, 10:30:37 »

Paid, thanks for the quick response and adjustment!

swill · « **Reply #273 on:** Thu, 21 August 2014, 16:03:23 »

Paid!!! Thanks for doing this Ivan, you're a rockstar...

apathy3cs · « **Reply #274 on:** Thu, 21 August 2014, 19:17:52 »

Paid - Thanks Ivan!

Distilled · « **Reply #275 on:** Fri, 22 August 2014, 19:05:44 »

and paid. Thanks so much Ivan.

Synjin · « **Reply #276 on:** Fri, 22 August 2014, 19:48:53 »

Forgot to post it but I've paid the second invoice as well

lewi · « **Reply #277 on:** Sat, 23 August 2014, 00:33:54 »

o3okevin · « **Reply #278 on:** Sat, 23 August 2014, 03:29:22 »

Paid!

Shinryuu · « **Reply #279 on:** Wed, 27 August 2014, 15:55:18 »

Oh, I was too late! Have fun guys.

durandalx · « **Reply #280 on:** Wed, 27 August 2014, 19:01:27 »

Sent you a PM, Ivan - I just noticed the invoice in my mail - is it too late to make payment?

durandalx · « **Reply #281 on:** Thu, 28 August 2014, 09:20:54 »

Paid!

IvanIvanovich · « **Reply #282 on:** Thu, 04 September 2014, 08:48:32 »

Order placed.
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60

JaccoW · « **Reply #283 on:** Thu, 04 September 2014, 08:59:34 »

Quote from: IvanIvanovich on Thu, 04 September 2014, 08:48:32

Order placed.
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60

I guess it's safe to say we have finally hit a GMK MOQ overwhelmingly

user 18 · « **Reply #284 on:** Thu, 04 September 2014, 09:59:52 »

I am impressed by those numbers

IvanIvanovich · « **Reply #285 on:** Thu, 04 September 2014, 10:29:08 »

GH60 stabs is included in that also. But, we still had a pretty large order without it.

Cafiend · « **Reply #286 on:** Sat, 06 September 2014, 14:20:19 »

Sorry I missed this. (Changed jobs etc.)

If anyone has an extra 6.25 space bar or 2 I would purchase at a premium price!

chzel · « **Reply #287 on:** Thu, 11 September 2014, 16:00:44 »

Quote from: IvanIvanovich on Thu, 04 September 2014, 08:48:32

Order placed.
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60

Do we know yet whether the PCB mounted are going to be bolt or clip?

user 18 · « **Reply #288 on:** Thu, 11 September 2014, 17:41:22 »

Quote from: IvanIvanovich on Tue, 19 August 2014, 14:21:47

Yes, we will be getting the bolt type for PCB mount.

chzel · « **Reply #289 on:** Thu, 11 September 2014, 17:53:56 »

Thank you! I missed that!

nubbinator · « **Reply #290 on:** Thu, 11 September 2014, 20:34:11 »

Quote from: IvanIvanovich on Tue, 19 August 2014, 14:21:47

Yes, we will be getting the bolt type for PCB mount.

I should have bought more. But YAY!!

Synjin · « **Reply #291 on:** Fri, 12 September 2014, 00:55:39 »

Quote from: nubbinator on Thu, 11 September 2014, 20:34:11

Quote from: IvanIvanovich on Tue, 19 August 2014, 14:21:47
Yes, we will be getting the bolt type for PCB mount.

I should have bought more. But YAY!!

I feel ya

domoaligato · « **Reply #292 on:** Mon, 15 September 2014, 16:35:42 »

Quote from: IvanIvanovich on Tue, 19 August 2014, 14:21:47

If I make mistake on invoice just inform me. You can email respond to the invoice also which will likely get my attention sooner and I don't have to hunt through paypals terrible site to locate it. Same goes if you require change, it's no problem to do so before you pay invoice.

Yes, we will be getting the bolt type for PCB mount.

will the gh60 gb users be getting these bolt types? please say yes...

nubbinator · « **Reply #293 on:** Mon, 15 September 2014, 20:48:23 »

Quote from: domoaligato on Mon, 15 September 2014, 16:35:42

Quote from: IvanIvanovich on Tue, 19 August 2014, 14:21:47
If I make mistake on invoice just inform me. You can email respond to the invoice also which will likely get my attention sooner and I don't have to hunt through paypals terrible site to locate it. Same goes if you require change, it's no problem to do so before you pay invoice.

Yes, we will be getting the bolt type for PCB mount.

will the gh60 gb users be getting these bolt types? please say yes...

Yes, or so I would assume since he wanted to make it all or nothing.

IvanIvanovich · « **Reply #294 on:** Tue, 16 September 2014, 09:21:55 »

Yes all the PCB mount is going to be bolt type across the board. I'm still waiting for TJ to pay the GH60 order though...

chzel · « **Reply #295 on:** Tue, 16 September 2014, 09:29:52 »

Do you have an approximate timeframe for shipping this GB IvanIvanovich? Could it be within this month?
It is my understanding that we are waiting for Dolch to finish production, right?

domoaligato · « **Reply #296 on:** Tue, 16 September 2014, 09:55:51 »

Quote from: IvanIvanovich on Tue, 16 September 2014, 09:21:55

Yes all the PCB mount is going to be bolt type across the board. I'm still waiting for TJ to pay the GH60 order though...

omfg thank you. this is awesome!

IvanIvanovich · « **Reply #297 on:** Tue, 16 September 2014, 09:56:38 »

No, we are waiting on TJ to pay me at this point so I can pay to GMK.

chzel · « **Reply #298 on:** Tue, 16 September 2014, 11:02:48 »

Quote from: IvanIvanovich on Tue, 16 September 2014, 09:56:38

No, we are waiting on TJ to pay me at this point so I can pay to GMK.

Ok, thanks!

Synjin · « **Reply #299 on:** Tue, 16 September 2014, 20:36:44 »

Quote from: IvanIvanovich on Tue, 16 September 2014, 09:56:38

No, we are waiting on TJ to pay me at this point so I can pay to GMK.

I'm confused. They have already been produced and are just waiting for payments?

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: Cherry Stabilizers + MX blacks PCB (Read 112999 times)