Author Topic: [IC] THICK PBT Engraved Keycaps  (Read 5776 times)

0 Members and 1 Guest are viewing this topic.

Offline Karura

  • Professional Canadian
  • * Destiny Supporter
  • Thread Starter
  • Posts: 1574
  • Location: Canada
  • SKidata life.
[IC] THICK PBT Engraved Keycaps
« on: Fri, 08 August 2014, 15:26:11 »
Hello, I am just wondering if there is any interest for a THICK PBT Engraved keycaps set, in either black or white, or both.

They would be from IMSTO, so it'll be the nice thick PBT that everyone likes.

They would look similar to these, but these are thin PBT, sorry for the poor photo.


They would be complete white or black sets, including numpad.

Engraved keycaps don't get dirty easily, and if they do, it's easy to clean with a toothbrush, while maintaining a stealth look.

"Remember boys, raccoon cold... don't worry, raccoon will find cave." -Sent

Offline frosty

  • jukebox hero
  • Posts: 700
  • Location: Singapore
Re: [IC] THICK PBT Engraved Keycaps
« Reply #1 on: Sat, 09 August 2014, 01:07:08 »
how about an option for dyesubbed pbt from imsto? these looks good as well tho :)

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [IC] THICK PBT Engraved Keycaps
« Reply #2 on: Sat, 09 August 2014, 01:30:14 »
Can we get a blank option? Thick blank PBT is so impossible to find in black and it will contribute to the MOQ without adding any difficulty.

Also do you know if they're able to provide a 1.75x short shift?
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline frosty

  • jukebox hero
  • Posts: 700
  • Location: Singapore
Re: [IC] THICK PBT Engraved Keycaps
« Reply #3 on: Sat, 09 August 2014, 03:47:31 »
^what bueller said.
i think engraved pbt would be hard to reach the MOQ however dyesub and blanks from imsto is certainly able to get the MOQ

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [IC] THICK PBT Engraved Keycaps
« Reply #4 on: Sat, 09 August 2014, 04:55:43 »
I'd be interested in engraved sets in both white and black.

What MOQ are we talking about here?

I don't think the demand for dyesub or blank sets is really there, after Ivan's Round 3 GB.

Offline frosty

  • jukebox hero
  • Posts: 700
  • Location: Singapore
Re: [IC] THICK PBT Engraved Keycaps
« Reply #5 on: Sat, 09 August 2014, 07:52:05 »

I'd be interested in engraved sets in both white and black.

What MOQ are we talking about here?

I don't think the demand for dyesub or blank sets is really there, after Ivan's Round 3 GB.
well, lots of people didn't get into ivan's r3 gb. and dyesub beige/white imstos are always a hot choice :)

Offline Karura

  • Professional Canadian
  • * Destiny Supporter
  • Thread Starter
  • Posts: 1574
  • Location: Canada
  • SKidata life.
Re: [IC] THICK PBT Engraved Keycaps
« Reply #6 on: Sat, 09 August 2014, 21:37:39 »
Thanks for the replies, I'm getting in touch with IMSTO to figure out what the MOQ is.

Unfortunately, this interest check is strictly for thick PBT keycaps (choice of black or white) to be engraved, since engraving requires a MOQ.

I will inquire about getting blank keycaps that aren't engraved, as I feel that would probably contribute to the MOQ, but I'm not sure about dyesub.

"Remember boys, raccoon cold... don't worry, raccoon will find cave." -Sent

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [IC] THICK PBT Engraved Keycaps
« Reply #7 on: Sat, 09 August 2014, 23:50:00 »
I just hope Imsto can engrave the keys with Cherry font.

I don't want a monstrosity like this (pic from Qtan's shop):

http://imagehost.vendio.com/a/35122654/aview/T20uJ_Xc4XXXXXXXXX___150578248.jpg_310x310.jpg


Offline Karura

  • Professional Canadian
  • * Destiny Supporter
  • Thread Starter
  • Posts: 1574
  • Location: Canada
  • SKidata life.
Re: [IC] THICK PBT Engraved Keycaps
« Reply #8 on: Mon, 11 August 2014, 05:12:10 »
I just heard back from IMSTO.

Apparently, we are going to need a MOQ of 500 for EACH colour (for engraving)... so that brings this IC to a conclusion, as I don't think it's a realistic MOQ.

I enjoyed our brief moment of brainstorming.

"Remember boys, raccoon cold... don't worry, raccoon will find cave." -Sent

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [IC] THICK PBT Engraved Keycaps
« Reply #9 on: Mon, 11 August 2014, 11:31:56 »
WTF 500?!?

Well, you're right. In this case it doesn't even makes sense to think about it anymore :(

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: [IC] THICK PBT Engraved Keycaps
« Reply #10 on: Mon, 11 August 2014, 11:41:36 »
Well you can keep the IC going... If there is enough interest I will consider offering the option on my next round. It may be worthwhile to split up the MOQ between blank, dyesub and engrave.

Offline Xenderwind

  • Posts: 585
  • Location: chesapeake, virginia
Re: [IC] THICK PBT Engraved Keycaps
« Reply #11 on: Mon, 11 August 2014, 11:56:16 »
Well you can keep the IC going... If there is enough interest I will consider offering the option on my next round. It may be worthwhile to split up the MOQ between blank, dyesub and engrave.
It kinda sounds like he's saying it isn't even possible to split up the MOQ.

Apparently, we are going to need a MOQ of 500 for EACH colour (for engraving)... so that brings this IC to a conclusion, as I don't think it's a realistic MOQ.

GON NS 87 62g clears, QFR 62g clears, Pure 65g blues, HHKB Pro II

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: [IC] THICK PBT Engraved Keycaps
« Reply #12 on: Mon, 11 August 2014, 15:16:03 »
How it works is there is a MOQ of keycaps in bulk from the factory. They all come blank then go to another party for dyesub, laser, engrave. I deal with imsto on these things before so I know what can be done.

Offline Xenderwind

  • Posts: 585
  • Location: chesapeake, virginia
Re: [IC] THICK PBT Engraved Keycaps
« Reply #13 on: Mon, 11 August 2014, 15:43:11 »
How it works is there is a MOQ of keycaps in bulk from the factory. They all come blank then go to another party for dyesub, laser, engrave. I deal with imsto on these things before so I know what can be done.
Ahh fair enough.  I knew you dealt with him before.  Just didn't know if engraving was a different matter (as I believe I've only seen you with dyesubs).  I thought he meant it was a moq for the engraving process, not sourcing of the keycaps.
GON NS 87 62g clears, QFR 62g clears, Pure 65g blues, HHKB Pro II

Offline Karura

  • Professional Canadian
  • * Destiny Supporter
  • Thread Starter
  • Posts: 1574
  • Location: Canada
  • SKidata life.
Re: [IC] THICK PBT Engraved Keycaps
« Reply #14 on: Mon, 11 August 2014, 16:26:24 »
Apparently its the engraving process, not keycaps that require the 500 MOQ.  Then again Ivan could know something I don't, could you clarify?

"Remember boys, raccoon cold... don't worry, raccoon will find cave." -Sent

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: [IC] THICK PBT Engraved Keycaps
« Reply #15 on: Tue, 12 August 2014, 12:04:10 »
It's been a very long time since I asked about it (I had wanted to do engraved set in runes at one point). Perhaps somethings changed. If that is what imsto is telling you then it is the case.