geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: LifeZ on Wed, 27 September 2017, 23:31:21

Title: [GB] LZ CLSm (Classic 75) : [Completed]
Post by: LifeZ on Wed, 27 September 2017, 23:31:21
Hello everyone,

Scound GB

This group buy is for a LZ CLSm
for the Classic 75%

IC thread
https://geekhack.org/index.php?topic=91518.0

================================================
[attachimg=3]
[attach=4]
[attach=5]


Specifications:
Aluminum case 6061
9 degree angled
MX Switch plate a Aluminum n Stainless steel n Polycarbonate
Brass Weight

ISO + ANSI
PCB:
Fully Programmable
Full LED backlighting
Full SMT(pre-soldered Device, Diodes, Resistors)

-------------------------------------------------

-.Basic Parts
Case Colors:
Black
Silver
Grey
and none anodize


Switch Plate:
Alu (Silver)
STS (Stainless Steel)
Polycarbonate (Transparent)

Weight Plate:
Brass


Basic kit 1 set of include 1 pcb & 1acrylic diffuser n 1 LZ BAG

-------------------------------------------------

-.Additional Parts
PCB Mount Cherry Genuine Stabz(1kit)
Extra PCB
Extra Switch plate

-------------------------------------------------

Price:(excluding paypal fee and shipping fee)

Basic kit : $450


Shipping:
Different depending on Order Option (
Defult 1 set(Box) of weights : about 4.0~4.5kg
EMS shipping Price (1set) with Tracking number
Asia : $40
EU, Canada : $63
Usa : $75
-------------------------------------------------

The PCB is Designed/Developed by Leeku
The PCB is Programmed with JigOn firmware : http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787

LAYOUT
[attach=2]
[attach=1]

-------------------------------------------------

Note.

Switch plate
It is some Burr.a little scratch It is common.
It is not a defective product.....

-------------------------------------------------

Order deadline 2017-10-15

Payment deadline 2017-10-27

Production 20 ~ 24 weeks from Payment deadline

Total : 70 set

-------------------------------------------------

Order Here (https://goo.gl/forms/7eVsOv6xVpM1jLQE2)

-------------------------------------------------

Order Check (https://goo.gl/v9JDxC)
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Moderation Team on Sun, 01 October 2017, 09:16:31
As a reminder to all, CAVEAT EMPTOR (https://geekhack.org/index.php?topic=36773.0)

GLWGB! :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Cocopah on Sun, 01 October 2017, 09:20:08
Nice, order submitted
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Tsuruya on Sun, 01 October 2017, 09:22:00
Order submitted!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Sun, 01 October 2017, 09:36:54
Submitted.  :thumb:

Also pmed for a change in my order.

Form kinda confused me, but all in all, I went for two PC plates and two pcbs.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: yonghf on Sun, 01 October 2017, 09:43:06
Order submitted! I PM'ed you regarding an amendment to my order - added an extra PCB by mistake.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: avid on Sun, 01 October 2017, 09:52:21
What colors are you guys getting? Debating black or silver.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Sun, 01 October 2017, 09:57:01

What colors are you guys getting? Debating black or silver.
I think people mostly liked gray and black according to CLS tkl GB but I'm personally only going for silver since I don't have a silver board yet.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Tsuruya on Sun, 01 October 2017, 10:07:43
Submitted.  :thumb:

Also pmed for a change in my order.

Form kinda confused me, but all in all, I went for two PC plates and two pcbs.

Order submitted! I PM'ed you regarding an amendment to my order - added an extra PCB by mistake.

made the same mistake. I sent a pm as well.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: kmba on Sun, 01 October 2017, 10:18:08
I think 75% looks best in black. This is very nice looking kit but a little too rich for my blood.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Sun, 01 October 2017, 10:25:55
I think 75% looks best in black. This is very nice looking kit but a little too rich for my blood.
I do agree that black looks the best on 75%, I probably would have went for black if I didn't already have a black 75% that's coming soon.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: JazzThing on Sun, 01 October 2017, 12:06:22
I just submitted. Thanks.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Sun, 01 October 2017, 13:29:41
Nice work as always, LZ. GLWGB.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: MajorKoos on Sun, 01 October 2017, 16:42:58
Sold!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: SolidCactus on Sun, 01 October 2017, 17:36:33
I just submitted an order! Many thanks!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: poolside on Sun, 01 October 2017, 17:53:03
LZ bag  :cool:

Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: alveeno on Sun, 01 October 2017, 18:16:42
Submitted! In for the raw aluminum. Anodize or cerakote?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Sun, 01 October 2017, 18:33:01
LZ bag  :cool:

Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
No, Normal pcb mount type.
Sure, choose colours and q'ty
pm me
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Trente on Sun, 01 October 2017, 18:57:09
LZ bag  :cool:

Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
No, Normal pcb mount type.
Sure, choose colours and q'ty
pm me

These switch film looks very nice, what's the material, and can I order them without ordering the lz CLSm ?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Sun, 01 October 2017, 19:21:27
LZ bag  :cool:

Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
No, Normal pcb mount type.
Sure, choose colours and q'ty
pm me

These switch film looks very nice, what's the material, and can I order them without ordering the lz CLSm ?
Yes, Pm me.
With ship clsm
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: ihalatch on Sun, 01 October 2017, 20:11:31
Hi Lz,
Please remove my first order. I submitted a second one in order to change some specs. Thanks
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Sun, 01 October 2017, 20:49:33
Hello everyone,

Scound GB

This group buy is for a LZ CLSm
for the Classic 75%


HOT DAMN, about time.


Just waiting for some questions to get answered by our LZ here.

Do expect an order to go through, another very fine example of true Korean Craftsmanship available to us common folk, here in the West  :thumb: .
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: energyd on Sun, 01 October 2017, 21:07:09
How would the diffuser look like? Is it partial or is it surrounding the whole keyboard?

How would you guys compare the polycarbonate plate vs alu plate? feel and sturdy wise?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: ihalatch on Sun, 01 October 2017, 21:29:25
I didn't see any option for the diffuser in the order form?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Sun, 01 October 2017, 22:32:18
Done It;

LZ CLSm
Order Completed.

 :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: ihalatch on Sun, 01 October 2017, 23:45:39
Your opinion on the polycarbonate switch plate? Is it good with clicky blue switches?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Sun, 01 October 2017, 23:54:53
Your opinion on the polycarbonate switch plate? Is it good with clicky blue switches?

Polycarb offers a much softer bottomout than metal alternatives -- I recommend it with linears above other options.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: ihalatch on Sun, 01 October 2017, 23:56:26
Your opinion on the polycarbonate switch plate? Is it good with clicky blue switches?

Polycarb offers a much softer bottomout than metal alternatives -- I recommend it with linears above other options.

Thanks, STS will do.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Cocopah on Mon, 02 October 2017, 00:09:13
Done It;

LZ CLSm
Order Completed.

 :thumb:

Im glad we're going to be blessed with hype for this GB as well haha.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: mediman on Mon, 02 October 2017, 08:08:38
hi, LZ.
This is the first buy for your GB.
I made  a second order, because of case color change.
Could you remove the previous order?
Thank you!!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: klove4252 on Mon, 02 October 2017, 09:31:56
Very excited about this GB!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: megaforce on Mon, 02 October 2017, 11:19:25
@LZ

Would this PCB fit your Mini?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: poolside on Mon, 02 October 2017, 17:20:26
LZ bag  :cool:

Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
No, Normal pcb mount type.
Sure, choose colours and q'ty
pm me

Thanks for offering the switch films  :thumb:
How much do the extra bags and extra diffusers cost? How much of an impact on the shipping cost would one extra bag have?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Mon, 02 October 2017, 18:26:10
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Sylanthra on Mon, 02 October 2017, 18:31:18
Just to be clear, the polycarbonate plate is different from the defuser correct? I can use a steel plate and a defuser at the same time?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Mon, 02 October 2017, 18:35:11
Just to be clear, the polycarbonate plate is different from the defuser correct? I can use a steel plate and a defuser at the same time?
Yes, the polycarbonate plate is a switch plate, whereas the diffuser is to show off the RGB underglow.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: dblack on Mon, 02 October 2017, 20:04:08
Really love the simplistic design, Im definitely going to think about joining.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Mon, 02 October 2017, 20:30:02
Very excited about this GB!

WE all are.

For this year 2017, this will be my 3rd LZ Keyboard Order  8) .

He never fails to deliver another Unique Design, that will last for Centuries  :thumb: .
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: energyd on Mon, 02 October 2017, 21:47:48
Could anyone point me a place I can buy under glow led for the diffuser? What model do I need?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: ihalatch on Mon, 02 October 2017, 22:26:41
Could anyone point me a place I can buy under glow led for the diffuser? What model do I need?

You don't need to buy underglow leds the smd rgb leds are presoldered to the bottom of the pcb.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Mon, 02 October 2017, 23:47:06
Could anyone point me a place I can buy under glow led for the diffuser? What model do I need?

thankfully we live in an era of presoldered LEDs

throwback to phantom

LZ or kin will know what spec LED they're using
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: poolside on Tue, 03 October 2017, 02:07:49
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%

Thanks for these answers LZ. How much are the extra bags?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Tue, 03 October 2017, 02:10:25
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%

Thanks for these answers LZ. How much are the extra bags?

I think they're $30
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Tue, 03 October 2017, 05:36:50
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%

Thanks for these answers LZ. How much are the extra bags?
Extra bag : 30usd/each
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: need on Tue, 03 October 2017, 07:11:06
Hi LifeZ, can I just get the bag? Don't have the money for the keyboard itself :(
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: neon_tom on Tue, 03 October 2017, 07:52:29
Hey LZ, I need to make a change to my order. Should I submit a new form or just PM you the update?


Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Tue, 03 October 2017, 08:00:22
Hi LifeZ, can I just get the bag? Don't have the money for the keyboard itself :(
Hello, just bag is contect kin25. He have many bag. Other type.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Tue, 03 October 2017, 08:02:03
Hey LZ, I need to make a change to my order. Should I submit a new form or just PM you the update?


Sent from my iPhone using Tapatalk
Okay. Pm to me
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Muiju on Tue, 03 October 2017, 11:19:08
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%

Hi! Can I have 1 pack of switch films and 1 acrylic diffuser  with my order? I just ordered, but I made a mistake and would like to have a silver case rather than grey. If you can change my details, that would be great!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Tue, 03 October 2017, 11:52:11
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%

Hi! Can I have 1 pack of switch films and 1 acrylic diffuser  with my order? I just ordered, but I made a mistake and would like to have a silver case rather than grey. If you can change my details, that would be great!

PM LZ, it's a little faster than posting in the thread.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: brighenne on Tue, 03 October 2017, 11:57:47
I clarified over pm that the base kit comes with the acrylic diffuser. The $5 is to add an extra one.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: poolside on Tue, 03 October 2017, 14:37:13
Will the bags have the LZ logo on the zipper latches or Kin's TX logo?
Just asking because I might need a matching 75% TX bag in the future.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: giHefca on Tue, 03 October 2017, 15:27:33
What is "white2", "red1", "pink1"?

edit: switch films I guess
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Tue, 03 October 2017, 20:02:15
Will the bags have the LZ logo on the zipper latches or Kin's TX logo?
Just asking because I might need a matching 75% TX bag in the future.

WAIT ON....  :o

He's actually selling a bag to go with the LZ CLSm?

PMing him now about this...... :thumb: :thumb: :thumb: :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Tue, 03 October 2017, 20:49:36
Will the bags have the LZ logo on the zipper latches or Kin's TX logo?
Just asking because I might need a matching 75% TX bag in the future.

WAIT ON....  :o

He's actually selling a bag to go with the LZ CLSm?

PMing him now about this...... :thumb: :thumb: :thumb: :thumb:
All the boards already come with one, same with CLS TKL. So you really only need to PM if you want extras.  :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: energyd on Wed, 04 October 2017, 17:13:58
are the invoices out yet?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Wed, 04 October 2017, 20:31:39
are the invoices out yet?

His note, is that the Order deadline will be 2017-10-15.

After that time is reached, he will then send out invoices to everyone involved.

LZ is like a time piece himself, he never changes anything unless something seriously goes wrong.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: energyd on Wed, 04 October 2017, 20:58:18
Thx! Good to know! Hope this GB go well. :p
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: n__dles on Wed, 04 October 2017, 21:21:36
Won't non-anodized aluminum slowly oxidize?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Wed, 04 October 2017, 21:44:57
Won't non-anodized aluminum slowly oxidize?

the point is to get it finished yourself
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Unforgivable on Wed, 04 October 2017, 23:41:17
LZ,

Just to make sure, the LZ CLSM comes with a free diffuser, correct?
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Wed, 04 October 2017, 23:48:02
Thx! Good to know! Hope this GB go well. :p

He's the ONLY keyboard manufacturer that actually finishes his projects on time and within budget  :thumb: . 

Something others need to pay attention here, when offering anything similar.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: danielucf on Thu, 05 October 2017, 00:12:41
Is it October 15th already?

Sent from my Pixel XL using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Puddsy on Thu, 05 October 2017, 02:13:28
LZ,

Just to make sure, the LZ CLSM comes with a free diffuser, correct?

yes it does, read up a bit
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: skaloola on Fri, 06 October 2017, 04:30:47
Guess the subject should no longer say "OPEN"

Code: [Select]
This form is no longer accepting responses, and has been set to automatically close by lifezone2@gmail.com
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Fri, 06 October 2017, 07:31:12
-----------------------------
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Fri, 06 October 2017, 10:23:53
Please confirm your order.
Order deadline 2017-10-15

Order Check (https://goo.gl/v9JDxC)
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Prime8 on Fri, 06 October 2017, 19:48:46
Order looks good. Thanks for the update. Now if I could only hit fast forward on the calendar.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: Elrick on Fri, 06 October 2017, 22:11:49
Order looks good. Thanks for the update. Now if I could only hit fast forward on the calendar.

You can then experience how quickly your 'End of Life' arrives, to welcome you with open arms  ;) .

Enjoy the time as is, instead of wishing it away for a keyboard.  Before you know it, LZ will finish and post everything off to all those who have paid up front.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: kidcongo on Sat, 07 October 2017, 04:38:06
Please confirm your order.
Order deadline 2017-10-15

Order Check (https://goo.gl/v9JDxC)
Looks good but the order form said non-ano $425 is that still correct?   Not a deal breaker  but every little helps!
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: skaloola on Sat, 07 October 2017, 04:56:54
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: renzpwns on Sat, 07 October 2017, 06:06:47
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)
It does support winkey as seen on the layouts pic and the cutouts on the polycarbonate plate.
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: LifeZ on Sat, 07 October 2017, 08:49:18
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)
Support bot row check~
https://geekhack.org/index.php?action=dlattach;topic=91775.0;attach=179189;image
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: skaloola on Sat, 07 October 2017, 09:58:44
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)
Support bot row check~
https://geekhack.org/index.php?action=dlattach;topic=91775.0;attach=179189;image

Thanks for clarifying, for some reason only top picture was loading.  didn't see pic with bottom row layouts
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: giHefca on Sat, 07 October 2017, 17:52:45
Please confirm your order.
Order deadline 2017-10-15

Order Check (https://goo.gl/v9JDxC)
Confirmed
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: IAmPyhrra on Sat, 07 October 2017, 19:24:23
Order looks good.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: hoanglh94 on Sun, 08 October 2017, 08:35:28
I confirm mine
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: klove4252 on Sun, 08 October 2017, 09:00:13
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: trikoi00 on Sun, 08 October 2017, 10:36:51
I confirm my order.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: LifeZ on Sun, 08 October 2017, 10:42:50
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: klove4252 on Sun, 08 October 2017, 10:58:48
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?

Sent from my SM-N950U1 using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: LifeZ on Sun, 08 October 2017, 11:15:59
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?

Sent from my SM-N950U1 using Tapatalk
Base kit 1 include 1 switch plate.
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: klove4252 on Sun, 08 October 2017, 11:28:53
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?

Sent from my SM-N950U1 using Tapatalk
Base kit 1 include 1 switch plate.
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Then one additional aluminum plate. I hope that clears it up

Sent from my SM-N950U1 using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: techfresh on Sun, 08 October 2017, 11:33:38
Confirmed. Order looks good.


Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: SolidCactus on Sun, 08 October 2017, 11:52:13
Confirmed. Order looks good.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: LifeZ on Sun, 08 October 2017, 12:02:33
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?

Sent from my SM-N950U1 using Tapatalk
Base kit 1 include 1 switch plate.
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Then one additional aluminum plate. I hope that clears it up

Sent from my SM-N950U1 using Tapatalk
okay, base 2 kit include alu switch plate and extra pc plate + pcb, right??
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: klove4252 on Sun, 08 October 2017, 12:07:03
Yes thank you

Sent from my SM-N950U1 using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: klove4252 on Sun, 08 October 2017, 12:07:23
Mine looks good

Sent from my SM-N950U1 using Tapatalk

Hey, plz check your order. yellow mark!
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?

Sent from my SM-N950U1 using Tapatalk
Base kit 1 include 1 switch plate.
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Then one additional aluminum plate. I hope that clears it up

Sent from my SM-N950U1 using Tapatalk
okay, base 2 kit include alu switch plate and extra pc plate + pcb, right??
Yes thank you

Sent from my SM-N950U1 using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: Puddsy on Sun, 08 October 2017, 13:46:21
For some reason, a few people PM'd me last night asking to change order details.

Don't do that. I'm not involved with this GB.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: poolside on Sun, 08 October 2017, 13:58:36
For some reason, a few people PM'd me last night asking to change order details.

Don't do that. I'm not involved with this GB.

This might be because you have been posting a lot these past few days   ;D
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: sroop on Sun, 08 October 2017, 14:37:20
Confirmed. Can't wait!
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: JazzThing on Sun, 08 October 2017, 16:23:50
Sorry to bother, but I do not understand how to confirm my order.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: loud_asian on Sun, 08 October 2017, 16:26:09
Sorry to bother, but I do not understand how to confirm my order.

You don’t need to do anything

If the order has problems, then you PM LZ. if it doesn’t, he’ll just invoice you according to what’s on the spreadsheet. All y’all sayin confirmed are just bumping the thread unnecessarily
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: JazzThing on Sun, 08 October 2017, 16:30:00
Thank you Loud_asian.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: poolside on Sun, 08 October 2017, 16:45:11
Hey skaloola, the order list has been rearranged by color, yours is now at #15.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: mechamode on Mon, 09 October 2017, 00:19:15
Order looks good.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: Elrick on Mon, 09 October 2017, 00:33:31
Order looks good.

Thus far 57 people have jumped in on this, schweeet   :thumb: .

Only hope it's not too many wanting this latest creation off him, his OCD on Perfection is quite extraordinary but he never gives up on any project he starts.

Can't wait when he finishes a few keyboards and start showing them via pictures, then that will be something to behold.
Title: Re: [GB] LZ CLSm (Classic 75) : Order confirm
Post by: ihalatch on Mon, 09 October 2017, 02:08:24
Confirmed.
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: LifeZ on Tue, 10 October 2017, 21:00:19
INVOICE SENT~~@@  ;)
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Elrick on Wed, 11 October 2017, 18:13:28
INVOICE SENT~~@@  ;)

And Paid in FULL, now lets get this baby started   :thumb: .
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: LiL_BrOwNiE247 on Thu, 12 October 2017, 08:50:23
Order confirmed and invoice paid! Thanks again for letting me in after the gform closed  :thumb:

Very excited as this is my first keyboard group buy. Hoping for a smooth production run in these coming months!
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: avid on Thu, 12 October 2017, 10:12:03
Order confirmed and invoice paid! Thanks again for letting me in after the gform closed  :thumb:

Very excited as this is my first keyboard group buy. Hoping for a smooth production run in these coming months!

A LZ board as your first custom? You're in for a beautiful board. Great choice!  :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: LiL_BrOwNiE247 on Thu, 12 October 2017, 10:38:13
Order confirmed and invoice paid! Thanks again for letting me in after the gform closed  :thumb:

Very excited as this is my first keyboard group buy. Hoping for a smooth production run in these coming months!

A LZ board as your first custom? You're in for a beautiful board. Great choice!  :thumb:

Thanks! I'm just hoping that my desk will be able to support the extra weight as this will be much heavier than my current KBD75  :D
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Tsuruya on Thu, 12 October 2017, 16:00:01
Paid for mine yesterday, I'm excited!
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Elrick on Thu, 12 October 2017, 18:42:43
Thanks! I'm just hoping that my desk will be able to support the extra weight as this will be much heavier than my current KBD75  :D

EASY solution here, if it doesn't support the LZ keyboard get another desk that will  8) .
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: ihalatch on Thu, 12 October 2017, 19:19:39
Paid.
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: laminam on Sat, 14 October 2017, 15:39:54
Am I too late?

It's Oct 14th where I am, and the form says closed. :(
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Puddsy on Sat, 14 October 2017, 15:49:01
Am I too late?

It's Oct 14th where I am, and the form says closed. :(

PM LZ
Title: Re: [GB] LZ CLSm (Classic 75) : OPEN
Post by: laminam on Sat, 14 October 2017, 15:52:21
Done, thanks for the tip. :)
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: hoanglh94 on Mon, 16 October 2017, 01:25:27
paid. first ever LZ xD
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Muiju on Mon, 16 October 2017, 11:01:10
paid. Looking forward to it   :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: Elrick on Tue, 17 October 2017, 04:28:05
The payment thus far has been BRILLIANT.

Only waiting for 13 people now, which isn't too bad especially at this point in time.

Because three quarters have fronted up with the money this baby is going to be built, superbly and might even finish far sooner than normal.
Title: Re: [GB] LZ CLSm (Classic 75) : INVOICE
Post by: avid on Tue, 17 October 2017, 06:31:02
The payment thus far has been BRILLIANT.

Yep, people are excited about this board and can't wait to get production started!
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Dreamre on Tue, 12 December 2017, 14:51:38
Hi LZ, any updates with this GB? Can't wait for it!
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Elrick on Wed, 13 December 2017, 17:56:38
Hi LZ, any updates with this GB? Can't wait for it!

I'm waiting for this as well but I suspect we need to give LZ some time off, due to the current date being about under two weeks away for Christmas.

Suspect he has a family that would like to see him there celebrating this time of year instead of being at the factory finishing off our keyboards.  If we wouldn't work over the holiday's why condemn LZ to do that?

Even though I will be working up to the 21st this year, I do get a few days off to see my family but far better to give LZ some time off and look forward to receiving our keyboards during 2018.
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Wed, 13 December 2017, 19:10:58
Hi LZ, any updates with this GB? Can't wait for it!

I'm waiting for this as well but I suspect we need to give LZ some time off, due to the current date being about under two weeks away for Christmas.

Suspect he has a family that would like to see him there celebrating this time of year instead of being at the factory finishing off our keyboards.  If we wouldn't work over the holiday's why condemn LZ to do that?

Even though I will be working up to the 21st this year, I do get a few days off to see my family but far better to give LZ some time off and look forward to receiving our keyboards during 2018.

Production is being done without problems.
It is a bit busy at the end of the year.
And it is Christmas and my birthday Christmas Eve . hahahaaaaaaa  ;D
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Dreamre on Wed, 13 December 2017, 20:34:32
Hi LZ, any updates with this GB? Can't wait for it!

I'm waiting for this as well but I suspect we need to give LZ some time off, due to the current date being about under two weeks away for Christmas.

Suspect he has a family that would like to see him there celebrating this time of year instead of being at the factory finishing off our keyboards.  If we wouldn't work over the holiday's why condemn LZ to do that?

Even though I will be working up to the 21st this year, I do get a few days off to see my family but far better to give LZ some time off and look forward to receiving our keyboards during 2018.

Production is being done without problems.
It is a bit busy at the end of the year.
And it is Christmas and my birthday Christmas Eve . hahahaaaaaaa  ;D

Awesome, happy early birthday  ;D!!!

Edit-

Looking for a black kit with an alu plate if anyone wants to part. PM me!
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Elrick on Thu, 14 December 2017, 01:18:57
Production is being done without problems.
It is a bit busy at the end of the year.
And it is Christmas and my birthday Christmas Eve . hahahaaaaaaa  ;D

Thanks for letting us know but I always knew this keyboard was never in any problem on completing in time.

Also Happy Birthday my dear fellow on the 24th because without you being here and contributing such talent in producing these keyboards, life would be extremely boring on this planet.  You always help to liven up the Keyboard World with more of your creations.

Thank you for being here and doing this, much appreciated  :thumb: .
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Mon, 08 January 2018, 20:30:51
UPDATE.
CNC 70%
SWITCH PLATE 40%
PCB 90%
BAG 90%

Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: energyd on Wed, 10 January 2018, 11:27:57
UPDATE.
CNC 70%
SWITCH PLATE 40%
PCB 90%
BAG 90%

Thanks for the update LZ. So looks like the plate is gonna be the bottleneck?
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: hoanglh94 on Sun, 28 January 2018, 21:09:38
When should we expect our board to arrive. So eager for my first Lz  ;D
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Thu, 01 February 2018, 19:27:47
UPDATE. Feb.02
CNC 90% (Waiting for 1st inspection)
SWITCH PLATE 100%
PCB 100%
BAG 100%
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: MajorKoos on Thu, 01 February 2018, 20:04:28
UPDATE. Feb.02
CNC 90% (Waiting for 1st inspection)
SWITCH PLATE 100%
PCB 100%
BAG 100%


Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: nzhoward on Wed, 14 February 2018, 14:31:51
Missed this group buy :( if anyone is willing to part with their kit please pm me. My reddit is /u/nzhoward

Sent from my Pixel 2 XL using Tapatalk

Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: MajorKoos on Sat, 17 February 2018, 15:26:42
I see CF plates are available?
http://lzlife.tistory.com/361
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Puddsy on Sat, 17 February 2018, 17:23:50
I see CF plates are available?
http://lzlife.tistory.com/361

korea only i think
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Mon, 26 February 2018, 04:53:07
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D  Some Country Restricted Items  :eek:
[attachimg=1]
 
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: dubious on Mon, 26 February 2018, 11:56:54
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D
(Attachment Link)

Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB  :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Puddsy on Mon, 26 February 2018, 12:17:58
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D
(Attachment Link)

Nice!

You have good taste in coffee.
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Helldrop on Mon, 26 February 2018, 12:33:18
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D
(Attachment Link)

Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB  :thumb:

Can’t wait to get this board!
BTW, how can you read Korean “Mocha gold” in that pic?
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: dubious on Mon, 26 February 2018, 17:06:05
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D
(Attachment Link)

Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB  :thumb:

Can’t wait to get this board!
BTW, how can you read Korean “Mocha gold” in that pic?

I can read Hangul.... I just don't always know what it says =)
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: dubious on Mon, 26 February 2018, 17:07:17
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water)  ;D
(Attachment Link)

Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB  :thumb:

Can’t wait to get this board!
BTW, how can you read Korean “Mocha gold” in that pic?

I can read Hangul.... I just don't always know what it says  :))

also, I've had it before and recognize the package
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Puddsy on Mon, 26 February 2018, 19:17:32

also, I've had it before and recognize the package

that's how i knew
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Mon, 26 February 2018, 19:37:39
OMG....

Instant coffee not allowed in country.

I will checking.... lol.   :eek:
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: hoanglh94 on Tue, 27 February 2018, 00:16:56
OMG....

Instant coffee not allowed in country.

I will checking.... lol.   :eek:

it's fine for Singapore hehe
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: ihalatch on Tue, 27 February 2018, 00:28:14
OMG....

Instant coffee not allowed in country.

I will checking.... lol.   :eek:

it's fine for Singapore hehe

Not OK in Australia! LZ please, do not use fruit boxes for shipment to Australia this time.
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Tue, 27 February 2018, 00:40:15
OMG....

Instant coffee not allowed in country.

I will checking.... lol.   :eek:

it's fine for Singapore hehe

Not OK in Australia! LZ please, do not use fruit boxes for shipment to Australia this time.

Okay, without coffee ....Australia, lol
and No name Box, Dont worries.!!
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: hoanglh94 on Tue, 27 February 2018, 02:15:18
btw when can we expect our board? so eager for my first Lz :'(
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: dreamx420 on Tue, 27 February 2018, 02:16:11
No coffee for everyone or just for Australia?


Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: LifeZ on Tue, 27 February 2018, 02:21:48
No coffee for everyone or just for Australia?


Sent from my iPhone using Tapatalk

Some countries.....
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: nzhoward on Tue, 27 February 2018, 07:54:33
Are there any extras LZ? Didnt get on the original buy :(
Title: Re: [GB] LZ CLSm (Classic 75) : [In Production]
Post by: Puddsy on Tue, 27 February 2018, 15:02:30
Are there any extras LZ? Didnt get on the original buy :(

there are never extras for LZ buys
Title: Re: [GB] LZ CLSm (Classic 75) : [Sorting]
Post by: LifeZ on Tue, 27 February 2018, 23:53:49
Sorting...
My home is hell ...
[attachimg=1]
Title: Re: [GB] LZ CLSm (Classic 75) : [Sorting]
Post by: ihalatch on Tue, 27 February 2018, 23:55:54
Sorting...
My home is hell ...
(Attachment Link)

Oh, please be careful with mine. Can't wait to start building it.
Title: Re: [GB] LZ CLSm (Classic 75) : [Sorting]
Post by: Puddsy on Wed, 28 February 2018, 00:12:18
Sorting...
My home is hell ...
(Attachment Link)

Gotta love these box pictures. They'll be out of there soon!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: sroop on Fri, 02 March 2018, 08:14:26
Just got my shipping notification!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: avid on Fri, 02 March 2018, 08:22:42
Also got mine, super excited about this!

Is there any more pics of the finished boards in different colors?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: LifeZ on Fri, 02 March 2018, 09:04:56
Today R1 delivery.
[attach=1]
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Puddsy on Fri, 02 March 2018, 12:31:46
Today R1 delivery.
(Attachment Link)

many :o
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Helldrop on Fri, 02 March 2018, 13:49:26
Today R1 delivery.
(Attachment Link)

A delivery man opened the gate of hell.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: avid on Sat, 03 March 2018, 10:25:39
A raw CLSm out in the wild
http://kbdlab.co.kr/index.php?document_srl=5070523&mid=board_Lsno50
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: yonghf on Sun, 04 March 2018, 20:44:31
I should be getting this today (currently at work). EMS is great, sent out Fri by LZ, delivered on Mon! :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: trikoi00 on Sun, 04 March 2018, 20:45:47
A raw CLSm out in the wild
http://kbdlab.co.kr/index.php?document_srl=5070523&mid=board_Lsno50
Same here. Fellow sg. Haha


Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: hoanglh94 on Sun, 04 March 2018, 21:22:26
A raw CLSm out in the wild
http://kbdlab.co.kr/index.php?document_srl=5070523&mid=board_Lsno50
Same here. Fellow sg. Haha


Sent from my iPhone using Tapatalk

Yeah, mine is also with delivery courier but I'm at work now. Sad Singapore working adults :(
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Dreamre on Sun, 04 March 2018, 21:23:42
Picture of a black gray one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Puddsy on Sun, 04 March 2018, 21:36:15
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490

Looks like the quality has gone up a tick over CLS. Very impressed.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Dreamre on Sun, 04 March 2018, 22:05:45
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490

Looks like the quality has gone up a tick over CLS. Very impressed.

Agreed, but it's a gray one - my mistake. Can't wait to see the silver and black ones!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Puddsy on Sun, 04 March 2018, 23:03:58
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490

Looks like the quality has gone up a tick over CLS. Very impressed.

Agreed, but it's a gray one - my mistake. Can't wait to see the silver and black ones!

yeh, read the caption

silver is the best color, so i am ready to see it
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: ihalatch on Sun, 04 March 2018, 23:44:05
I completely forgot. Do we get bags with the kit?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: hoanglh94 on Mon, 05 March 2018, 06:53:00
(https://i.imgur.com/5Mg14Ed_d.jpg)

Awww yeaaaa
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: yonghf on Mon, 05 March 2018, 07:38:49
I completely forgot. Do we get a bag with the kit?

Yeah, it comes with a bag. Glad I went with Silver :D

(https://i.imgur.com/dydbhZK.jpg)

(https://i.imgur.com/eIMApCM.jpg)
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Mon, 05 March 2018, 07:43:09
Show Image
(https://i.imgur.com/5Mg14Ed_d.jpg)


Awww yeaaaa
Cool. Looking forward to see your build  either here or in FB group. Hehe


Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: renzpwns on Tue, 06 March 2018, 13:02:16
gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up.  :'(
Title: Re: [GB] LZ CLSm (Classic 75) : [Shipping]
Post by: Puddsy on Tue, 06 March 2018, 15:48:32
I completely forgot. Do we get a bag with the kit?

Yeah, it comes with a bag. Glad I went with Silver :D

Show Image
(https://i.imgur.com/dydbhZK.jpg)


Show Image
(https://i.imgur.com/eIMApCM.jpg)


i can't believe i missed this

what a great looking board
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Tue, 06 March 2018, 15:51:25
gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up.  :'(

Same here, but considering I have a screen door I know for fact they just didn't bother to attempt delivery in the first place - been waiting for them all day.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Muiju on Tue, 06 March 2018, 17:38:17
Just received mine in perfect condition, thank you so much LZ!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: renzpwns on Tue, 06 March 2018, 17:42:02
gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up.  :'(

Same here, but considering I have a screen door I know for fact they just didn't bother to attempt delivery in the first place - been waiting for them all day.
Huh, looks like mailman went for another run. Thanks for the smooth GB LZ!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Tue, 06 March 2018, 19:01:43
gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up.  :'(

Same here, but considering I have a screen door I know for fact they just didn't bother to attempt delivery in the first place - been waiting for them all day.
Huh, looks like mailman went for another run. Thanks for the smooth GB LZ!

I wasn't brave enough for the PC plate - too worried about it cracking with my ham-fisted typing.
I'll pick mine up from the local post office tomorrow morning and put it together.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: LiL_BrOwNiE247 on Tue, 06 March 2018, 19:12:08
Mine came in today as well, didn't even have to sign for it!

(https://i.imgur.com/LAyTcI1.jpg)

(https://i.imgur.com/1pMoNFk.jpg)

(https://i.imgur.com/VLDWkbA.jpg)

Can't wait to get this board built!
Side note: that the largest microfiber cloth I've ever seen.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: ihalatch on Tue, 06 March 2018, 19:20:19
Got mine too. It's perfect.  Thanks, LZ. Can we build it without the diffuser?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Wed, 07 March 2018, 16:37:44
Thanks LZ.
Awesome as usual.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: yonghf on Thu, 08 March 2018, 07:31:26
Got mine too. It's perfect.  Thanks, LZ. Can we build it without the diffuser?

I built mine without the diffuser. Actually I'm unsure as to how the diffuser is supposed to sit between the top and bottom part. Will appreciate if someone can show me how it should align.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: sroop on Thu, 08 March 2018, 08:09:34
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Thu, 08 March 2018, 08:39:21
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Thu, 08 March 2018, 08:45:00
Got mine too. It's perfect.  Thanks, LZ. Can we build it without the diffuser?

I built mine without the diffuser. Actually I'm unsure as to how the diffuser is supposed to sit between the top and bottom part. Will appreciate if someone can show me how it should align.

You've got to snap out the middle bit and then break the cut-out for the USB port (see pic).

Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: sroop on Thu, 08 March 2018, 10:07:10
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)



Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Unforgivable on Thu, 08 March 2018, 10:15:26
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

You have to break that part off. It’ll take a bit of pressure, so be careful.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: bminhz on Thu, 08 March 2018, 10:16:48
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

have to bend and remove that top from the pcb with your hands
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: sroop on Thu, 08 March 2018, 10:41:38
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

You have to break that part off. It’ll take a bit of pressure, so be careful.

Got it. Thanks guys!


(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)



Sent from my iPhone using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: ___q on Thu, 08 March 2018, 10:57:46
Looks like the grey turned out great!

Got mine (silver) a few days ago, hopefully will get some time to build it in the next few days.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Thu, 08 March 2018, 11:23:33
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

You have to break that part off. It’ll take a bit of pressure, so be careful.

Got it. Thanks guys!


Show Image
(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)




Sent from my iPhone using Tapatalk

Looks great. 
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Thu, 08 March 2018, 11:26:40
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

A ball of cotton wool soaked with acetone will help get rid of those flux marks on the PCB :)
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: energyd on Thu, 08 March 2018, 12:05:54
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

You have to break that part off. It’ll take a bit of pressure, so be careful.

Got it. Thanks guys!


Show Image
(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)




Sent from my iPhone using Tapatalk

is this grey? looks amazing!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: sroop on Thu, 08 March 2018, 12:09:14
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?

Mount the stabs on the PCB.  Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.

I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.

Show Image
(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)




Sent from my iPhone using Tapatalk

You have to break that part off. It’ll take a bit of pressure, so be careful.

Got it. Thanks guys!


Show Image
(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)




Sent from my iPhone using Tapatalk

is this grey? looks amazing!

Yep, thanks! I just need SA Carbon to ship this month and I'll be a happy camper.  :D
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: techfresh on Thu, 08 March 2018, 12:35:47
Hi LZ!  Any estimate on when the remaining boards will ship?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: LifeZ on Thu, 08 March 2018, 18:20:11
Hi LZ!  Any estimate on when the remaining boards will ship?

Hey tech,
Your package today ship.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: LifeZ on Thu, 08 March 2018, 18:20:47
Got mine too. It's perfect.  Thanks, LZ. Can we build it without the diffuser?

I built mine without the diffuser. Actually I'm unsure as to how the diffuser is supposed to sit between the top and bottom part. Will appreciate if someone can show me how it should align.

You've got to snap out the middle bit and then break the cut-out for the USB port (see pic).

Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Thu, 08 March 2018, 19:58:33
LZ, you did an awesome job with this keyboard.
After using it for the last day and a bit I think I can safely call it my favorite keyboard to date.
The proportions of the bezels are perfect and the typing experience is rock solid.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: renzpwns on Thu, 08 March 2018, 20:41:04
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Puddsy on Thu, 08 March 2018, 20:59:16
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

oh wow, that's weird
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: LifeZ on Thu, 08 March 2018, 22:06:51
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

omG. That's weird
Brass distortion occurred. lol
There may be some variations, but there seems to be a bit more.

Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Fri, 09 March 2018, 13:21:41
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

That should be possible to straighten at least.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: energyd on Fri, 09 March 2018, 22:35:31
Are all the boards shipped?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Sat, 10 March 2018, 10:31:01
Have an issue with the keymap not saving everytime I unplug and plug in. Windows 10 would show "USB device not recognized" error message.
Keymap would revert back to default layout. I tried pluging it direct and via usb hub, both the same result. Any help would be appreciated.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Sat, 10 March 2018, 11:17:29
Hmm.  Could be a short.
Did you add in-switch or indicator LEDs?
Got a photo of the back of your PCB handy.

Title: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Sat, 10 March 2018, 18:54:20
Hmm nope. Just switches only. When I tested the pcb by using tweezer to short it, no issue. After assembly, seem to have this issue. Reset the firmware back to stock also. Photo wise, have to get back from work first.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Sat, 10 March 2018, 19:06:33
I guess take it out of the case and see if the problem persists. 
If the problems stop it's shorting on the case somewhere. 
If not it's something to do with the PCB itself I guess.

If it's a short with the case and you've still got that rectangular piece of foam from the packaging you can try sticking it between the PCB and case.
Shelf liner will work too.  If it's the PCB a photo will at least give a hit of whether it's your soldering or something else ;)
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Sat, 10 March 2018, 19:43:13
Yea, definitely gonna try that, i guess my solder joint is so tall til it touch the case causing a short ? Lol


Sent from my iPad using Tapatalk
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Sun, 11 March 2018, 16:46:51
Issue still persist even if I take off the bottom part. (https://uploads.tapatalk-cdn.com/20180311/d4f551d9fea3fc2e5fc5e6f87460e951.jpg)
(https://uploads.tapatalk-cdn.com/20180311/2364d8c82f9688d704eadc4f9a064a23.jpg)
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Sun, 11 March 2018, 17:32:49
The soldering job looks fine to me and taking it out of the case would have elimitated any of those possibilities too.
Are there any errors when connecting to the PCB using JigOn?
If you turn off all the LEDS (RGB and in switch) and "update all" the settings does it make any difference?
Failing that you could try reflashing the firmware.

If none of that works you may need a new PCB.
Title: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: trikoi00 on Sun, 11 March 2018, 23:32:27
No error when connecting to Jigon. RGB can be turn off when I update it. I have tried update to latest firmware to fix this issue. Now my Jigon is older than the firmware. In the end it still a functional keyboard abet minor annoyance anyways. Thanks for the help along the way, MajorKoos.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: renzpwns on Mon, 12 March 2018, 01:47:11
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

That should be possible to straighten at least.
Got any ideas? Not really well versed when it comes to working on these stuff. Worried that I'll just end up doing more damage to it.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Mon, 12 March 2018, 10:28:51
Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

That should be possible to straighten at least.
Got any ideas? Not really well versed when it comes to working on these stuff. Worried that I'll just end up doing more damage to it.

All you really need to do is support the ends on something padded (so it doesn't mess up the finish) and apply some downward force in the middle.
Body weight alone may be enough.  It depends on how strong you're feeling.  A machine shop can help too.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: kidcongo on Sun, 18 March 2018, 07:27:09
Finally got mine after the usual 2 week stay in UK customs :rolleyes:, beautifully packaged, thanks LZ.
(https://i.imgur.com/Bsk5tfR.jpg)
Really looking forward to building this..


Finished building it up today, PC plate is really interesting to type on  :). I'll see if I can get some decent pics of the finished build tomorrow.

One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?

My weight is also bent when removed but I found if I held it firmly in place so flat then screwed it in tightly it was fine. I'm sure you would have noticed but are you certain it's screwed in fully?
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: poolside on Sun, 18 March 2018, 17:47:45
Did you guys got any tracking numbers? The boards have been marked as shipped for a couple weeks now.
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: renzpwns on Mon, 19 March 2018, 04:33:54
My weight is also bent when removed but I found if I held it firmly in place so flat then screwed it in tightly it was fine. I'm sure you would have noticed but are you certain it's screwed in fully?
Yeah, I screwed it on nice and tight, but it's still protruding in the middle. Guess I'll try and figure out a way to fix it.
Did you guys got any tracking numbers? The boards have been marked as shipped for a couple weeks now.
Yeah, I got the automated email from paypal when the label is created.

Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: poolside on Mon, 19 March 2018, 18:19:56
Yeah, I got the automated email from paypal when the label is created.

Thanks. Found it: getting harassed at 'em customs.  :'(
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Tsuruya on Tue, 27 March 2018, 09:58:07
(http://i.imgur.com/BzXzYDF.jpg)
I'm glad I bought an LZ as a first Korean Custom. Absolutely stunning board. Thank you so much LZ!
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: MajorKoos on Tue, 27 March 2018, 10:26:37
Show Image
(http://i.imgur.com/BzXzYDF.jpg)

I'm glad I bought an LZ as a first Korean Custom. Absolutely stunning board. Thank you so much LZ!

Nice CLSm
Miami Nights is totally underrated
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Puddsy on Tue, 27 March 2018, 16:39:00
Show Image
(http://i.imgur.com/BzXzYDF.jpg)

I'm glad I bought an LZ as a first Korean Custom. Absolutely stunning board. Thank you so much LZ!

very nice, good pick as a first kustom

LZ is good people

Miami Nights is totally underrated

agree, love my set
Title: Re: [GB] LZ CLSm (Classic 75) : [Shiped]
Post by: Tsuruya on Tue, 27 March 2018, 20:21:29
very nice, good pick as a first kustom

LZ is good people

Nice CLSm
Miami Nights is totally underrated

Thanks guys! I'm absolutely in love with how the set looks on my CLSm
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: ihalatch on Sun, 01 April 2018, 21:06:11
I'm waiting for the XDA Oblique GB to slim this bad boy down
(http://i.imgur.com/EvmYZf8.jpg) (https://imgur.com/EvmYZf8)
(http://i.imgur.com/OOKrRUY.jpg) (https://imgur.com/OOKrRUY)
(http://i.imgur.com/6L8DCUw.jpg) (https://imgur.com/6L8DCUw)
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: kidcongo on Sun, 08 April 2018, 15:16:44
Here is my raw CLSm polished up with gmk bob, on box navy switches....
(https://i.imgur.com/IsNjrRA.jpg)
(https://i.imgur.com/MFA0nA1.jpg)
(https://i.imgur.com/UAYWYpG.jpg)
(https://i.imgur.com/qsusW14.jpg)

love it  ;D
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Remsky on Sun, 08 April 2018, 15:27:39
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D
You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: MajorKoos on Sun, 08 April 2018, 21:03:23
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D

Looks awesome
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Puddsy on Sun, 08 April 2018, 21:41:46
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D
You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:

second this

should be really cheap to get it done locally

****, you can also do it yourself at home if you really want to
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: kidcongo on Mon, 09 April 2018, 01:06:05
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D
You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:


Flaking!?
And as I understand you can only buff to a mirror finsh with bare aluminium..... But yes I may have to look into something if it turns out to be high maintenance, maybe a completely different finish like a glossy powder coat.
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D

Looks awesome

Thanks!
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: LifeZ on Mon, 09 April 2018, 19:12:25
Here is my raw CLSm polished up with gmk bob, on box navy switches....
Show Image
(https://i.imgur.com/IsNjrRA.jpg)

Show Image
(https://i.imgur.com/MFA0nA1.jpg)

Show Image
(https://i.imgur.com/UAYWYpG.jpg)

Show Image
(https://i.imgur.com/qsusW14.jpg)


love it  ;D

Polishing
Looks awesome :)
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: IAmPyhrra on Tue, 17 April 2018, 16:22:14
Have a black unbuilt kit with carb plate.

PM if anyone is interested and we can work things out.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Helldrop on Wed, 18 April 2018, 15:32:13
(https://i.imgur.com/0cJIPzz.jpg)

(https://i.imgur.com/WWb0jKv.jpg)

LZ-CLSm, the best 75 layout keeb I've ever seen
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: MajorKoos on Wed, 18 April 2018, 15:56:08
Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

That looks great.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: LifeZ on Wed, 18 April 2018, 18:47:12
Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

AWESOME!!!   :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Soraie on Tue, 22 May 2018, 10:18:49
Any chance of round 2 for 75%?

Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

AWESOME!!!   :thumb:
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: LiL_BrOwNiE247 on Tue, 22 May 2018, 10:27:29
Any chance of round 2 for 75%?

Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

AWESOME!!!   :thumb:

kevinlim02 on reddit is selling his CLSm kit w/ PC plate
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Soraie on Tue, 22 May 2018, 10:40:57
Any chance of round 2 for 75%?

Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

AWESOME!!!   :thumb:

kevinlim02 on reddit is selling his CLSm kit w/ PC plate

Definitely saw the post. Price of $750 was the main reason for hesitating. I understand exclusivity so contemplating heavily whether to just buy or pray for a possible round 2 in the future unless LZ boards are a one time production run only?
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: LifeZ on Tue, 22 May 2018, 21:39:06
Any chance of round 2 for 75%?

Show Image
(https://i.imgur.com/0cJIPzz.jpg)


Show Image
(https://i.imgur.com/WWb0jKv.jpg)


LZ-CLSm, the best 75 layout keeb I've ever seen

AWESOME!!!   :thumb:

kevinlim02 on reddit is selling his CLSm kit w/ PC plate

Definitely saw the post. Price of $750 was the main reason for hesitating. I understand exclusivity so contemplating heavily whether to just buy or pray for a possible round 2 in the future unless LZ boards are a one time production run only?
CLSm is only one time.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: dc_in_sf on Mon, 11 June 2018, 12:05:52
My weekend project was installing a KBD75 PCB into my CLSm.

Why you ask? I am a sucker for QMK (I put a Clueboard PCB into my LZ St), and the KBD75 PCB supports it. My next goal is to look at porting one of my Leeku PCBs to QMK, but my understanding is that the way RGB is supported may make it a little trickier.

The KBD 75 PCB does not have the USB connector in a compatible location so you'll have to do some surgery:

1. You'll have to de-solder the USB connector from the KBD75 to stop it interfering with the acrylic spacer. You may or may not have to dremel the "bump" that extends from the PCB where the USB connector is mounted depending on whether your PCB sits entirely below the top plate edge, which depends on how flush you managed to get your switches to sit.

2. There are USB connection points on the PCB (next to the USB connector) that are a lot easier to solder to than the tiny holes the USB connector is mounted to.

3. I used the adafruit mini usb breakout board. If I was to do it again I'd put a connector between the breakout board and the PCB to make it possible to disconnect the two.

4. I had to dremel the mounting holes and some extra PCB off the breakout board so it would fit in the cutout for the USB connector in the bottom case. On the plus side the breakout board is now braced against the case, so was able to get away with just electrical taping it in place (with a layer of tape around the breakout board itself)

5. The KBD 75 PCB has a couple less LED's than the PCB that comes with the CLSm, and on mine at least one of the LEDs was slightly defective, so it appears to be of lesser quality to me.

But I am now a very happy camper since all of my boards support QMK.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: JubJubCity on Fri, 20 July 2018, 11:17:05
Wondering if any one has a extra PCB there are willing to sell?
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: ocdper on Tue, 07 August 2018, 10:28:12
Hello!
I need a dxf file for self-tuned CLSm MX Switch Plate.
Is there anyone can get the file? ;)
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Dreamre on Tue, 02 April 2019, 12:02:54
Does anyone know of any potential replacement PCBs that will fit into this case?

Also, I have 2 alu plates for sale if anyone is interested in.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: Von Steve on Tue, 02 April 2019, 12:28:15
kbd75 maybe?
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: dc_in_sf on Tue, 02 April 2019, 13:32:00
Does anyone know of any potential replacement PCBs that will fit into this case?

Also, I have 2 alu plates for sale if anyone is interested in.

I put a KBD75 PCB in mine, description of that process is a couple of posts above yours.
Title: Re: [GB] LZ CLSm (Classic 75) : [ALL Shiped]
Post by: runningngunning on Fri, 05 April 2019, 01:54:20
Anyone looking to get rid of their grey kit hit me up!
Title: Re: [GB] LZ CLSm (Classic 75) : [Completed]
Post by: jimboytacos on Thu, 23 January 2020, 18:11:56
Would anyone happen to have the plate file for the this LZ CLSm? Wanna play with some interesting materials. Thanks! :)