So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
Nice! I like it. What made you choose the 1.75- ... -1.25-1.00 layout for the third row? Convention from the JD40?row1: 1.5-0.5=1
Nice! I like it. What made you choose the 1.75- ... -1.25-1.00 layout for the third row? Convention from the JD40?row1: 1.5-0.5=1
row2:1.75-0.5=1.25
row3:2.25-0.5
and then it can use like the 60%keyboard
the 1.25x and 1x key is because of "more keys is easier to use"
Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
Becouse my 60%keyboard is .....1.75x-1x (maybe ;D)Nice! I like it. What made you choose the 1.75- ... -1.25-1.00 layout for the third row? Convention from the JD40?row1: 1.5-0.5=1
row2:1.75-0.5=1.25
row3:2.25-0.5
and then it can use like the 60%keyboard
the 1.25x and 1x key is because of "more keys is easier to use"
Yes, I understand, LOL. I designed the JD40 in exactly the same way some years ago. I was just wondering why you chose ... -1.25-1.00 instead of ... -1.00-1.25, with the larger key on the end. :)
Becouse my 60%keyboard is .....1.75x-1x (maybe ;D)Nice! I like it. What made you choose the 1.75- ... -1.25-1.00 layout for the third row? Convention from the JD40?row1: 1.5-0.5=1
row2:1.75-0.5=1.25
row3:2.25-0.5
and then it can use like the 60%keyboard
the 1.25x and 1x key is because of "more keys is easier to use"
Yes, I understand, LOL. I designed the JD40 in exactly the same way some years ago. I was just wondering why you chose ... -1.25-1.00 instead of ... -1.00-1.25, with the larger key on the end. :)
And somebody may use the 1.25x shift and 1x fn
Very cool. Is this something that will be available for purchase?If you live in China,you can buy it at www.taobao.com
When will it evolve into Crobat? You best be giving that keyboard lots of love so it can!
I can't wait to post mine :DShow Image(http://i.imgur.com/ppO7cWz.jpg)
I can't wait to post mine :DShow Image(http://i.imgur.com/ppO7cWz.jpg)
WHERE DO I GET THESE
I can't wait to post mine :DShow Image(http://i.imgur.com/ppO7cWz.jpg)
WHERE DO I GET THESE
Taobao, going to need a proxy unfortunately.
Do you have a link?
Wouldn't mind asking feng or somethin
I can't wait to post mine :DShow Image(http://i.imgur.com/ppO7cWz.jpg)
WHERE DO I GET THESE
Taobao, going to need a proxy unfortunately.
Do you have a link?
Wouldn't mind asking feng or somethin
Do you have a link?
Wouldn't mind asking feng or somethin
Think this is (https://item.taobao.com/item.htm?spm=a230r.1.14.1.p4mR3B&id=520741513693&ns=1&abbucket=2#detail) it.
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Any word on the answer to this?Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
Hmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
I has shipped a fc660 to my friends from China to Boston and it took me about 200CYN(about30USD)Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
Where in China are you located? Also, where would the boards ship from? I might be able to help.I has shipped a fc660 to my friends from China to Boston and it took me about 200CYN(about30USD)Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
But I really don't know how to ship to each of you.
So can you give me a suggest? ;D
These are freaking cute... I don't think I could ever get used to the 40% layout though :(
These are freaking cute... I don't think I could ever get used to the 40% layout though :(
I would love to see some Youtube videos by diehard 40%'ers showing off how they live with these on a daily basis; especially those who do a lot of number crunching / text editing.
I'm live in Beijing.Where in China are you located? Also, where would the boards ship from? I might be able to help.I has shipped a fc660 to my friends from China to Boston and it took me about 200CYN(about30USD)Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
But I really don't know how to ship to each of you.
So can you give me a suggest? ;D
I'm live in Beijing.Where in China are you located? Also, where would the boards ship from? I might be able to help.I has shipped a fc660 to my friends from China to Boston and it took me about 200CYN(about30USD)Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
But I really don't know how to ship to each of you.
So can you give me a suggest? ;D
I'm live in Beijing.Where in China are you located? Also, where would the boards ship from? I might be able to help.I has shipped a fc660 to my friends from China to Boston and it took me about 200CYN(about30USD)Of courseHmm, that's not exactly the same as the other one (the mini HHKB basically)
Yeah, I couldn't find the mini HHKB one when I looked. That's the one I was interested in, as well.
I already have a mobik so another very similar 40% isn't that interesting for me :P
The Mini HHKB on the other hand...
Oh, it's a custom-made ordered by me. I will ask him to put it on taobao if possible.
Is it still the same PCB? Just a different case?
Yes, the only difference is the case --no holes at bottom left and right corner.
If there are more than 5 guys want to the "minihhkb" case,I think I can product some.
But I can't ship them to US.
So they can only buy it on the taobao and find a proxy.
Here is the link:https://item.taobao.com/item.htm?id=520741513693
Is it possible to get both plates so we can change in the future?
Maybe we can make a small GB?
If you can find a proxy for not too much and I or someone else can distribute it within North America.
But I really don't know how to ship to each of you.
So can you give me a suggest? ;D
My friend in BJ, a foreigner, could collect from you and send to us. I will ask him and get back to you guys.
I'm down for 2-3 kits
Ok I talked to my friend, he's on holiday now but will be back in a few months. He can help us in 2016 or you guys can find a different proxy now.Thanks for your help.
I'd suggest not waiting as the closer you get to Lunar New Year the less likely people are working.
Am I the only one wondering about this?Any word on the answer to this?Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
maybe you need this?Am I the only one wondering about this?Any word on the answer to this?Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
Sorry for my late reply. TKG is a system (firmware and tools) made by me and it's based on the great tmk firmware.Am I the only one wondering about this?Any word on the answer to this?Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
Perfect! I was wondering where it had come from. Thank youSorry for my late reply. TKG is a system (firmware and tools) made by me and it's based on the great tmk firmware.Am I the only one wondering about this?Any word on the answer to this?Is this tool hasu referred to being in development? I'd try it out further but I'm on my phone in heavy traffic so no tmk for me...So is Kimera Core a custom controller? Never heard of it. Interesting!Yes
It work with tkg:
http://keyboard.fans/tkg
(you can use this address when enjoyclick.org can't use)
It's not hasu's tool but you can still choose to do keymapping in TKG way or just in the original tmk way. I hope this answers your question.
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Once I get that in I'll put up the IC to hopefully move into a group buy within a week.
Looking to do 20 units in the group buy because of the shipping breaks.
Of course if all goes well there can be multiple rounds depending on greatfirewall
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Once I get that in I'll put up the IC to hopefully move into a group buy within a week.
Looking to do 20 units in the group buy because of the shipping breaks.
Of course if all goes well there can be multiple rounds depending on greatfirewall
Thanks for getting this moving GL1TCH3D, this will be an awesome board to travel with.
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Once I get that in I'll put up the IC to hopefully move into a group buy within a week.
Looking to do 20 units in the group buy because of the shipping breaks.
Of course if all goes well there can be multiple rounds depending on greatfirewall
Thanks for getting this moving GL1TCH3D, this will be an awesome board to travel with.
I'm pretty excited too. I already have a portable board though so this is either a backup or something different to use.
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Once I get that in I'll put up the IC to hopefully move into a group buy within a week.
Looking to do 20 units in the group buy because of the shipping breaks.
Of course if all goes well there can be multiple rounds depending on greatfirewall
Thanks for getting this moving GL1TCH3D, this will be an awesome board to travel with.
I'm pretty excited too. I already have a portable board though so this is either a backup or something different to use.
I already have two Pok3rs that I like to use to travel with, I don't even use them all too often unless I'm driving home from college but I like to bring my RS96 along too at times. I don't even know if I will be able to find a use for the Golbat but I'd like to have it apart of my collection. :p
Get over to IC and see how big the group is. Might be able to get batches made at a discount if you have enough support for this. :Dsample is supposed to be on the way.
Once I get that in I'll put up the IC to hopefully move into a group buy within a week.
Looking to do 20 units in the group buy because of the shipping breaks.
Of course if all goes well there can be multiple rounds depending on greatfirewall
Thanks for getting this moving GL1TCH3D, this will be an awesome board to travel with.
I'm pretty excited too. I already have a portable board though so this is either a backup or something different to use.
I already have two Pok3rs that I like to use to travel with, I don't even use them all too often unless I'm driving home from college but I like to bring my RS96 along too at times. I don't even know if I will be able to find a use for the Golbat but I'd like to have it apart of my collection. :p
Mini HHKB sounds amazing xD
Sometimes I do want to use something different from the standard 40% Mobik that I've been using for the past year.
I'm definitely in for the mini HHKB, I really like the Mobiks too but I can't justify the price considering the amount of use it would see.
That is awesome! Is golbat your favorite Pokemon or is it more finding the right pokemon to match the color scheme?Hint: Pokédex number ;)
That is awesome! Is golbat your favorite Pokemon or is it more finding the right pokemon to match the color scheme?Hint: Pokédex number ;)
That is awesome! Is golbat your favorite Pokemon or is it more finding the right pokemon to match the color scheme?Hint: Pokédex number ;)
I'm pretty sure he was just spam posting considering he's been here less than a day with over 40 posts
This is a very cute board, I like the split layout on the bottom row.
One thing I don't get with so many 40% designs is placing the Enter key as a home key. If you add a 1x in that position instead you only widen it by 0.5u and you can have symmetrical bottom 3 rows with the typing centre point in the actual centre point of the keyboard and it gives you another useful key (or more depending on bottom row layout) and it allows for more character layout options, something like this: http://www.keyboard-layout-editor.com/#/gists/65ac4e37afb1a3bf1314
(Attachment Link)
Also, no stabs needed. The JD45 is almost like this, but I don't like the Enter / Right Shift stagger and it's not symmetrical on the bottom 2 alpha rows or split in the typing centre on the bottom row. Also, it's 0.5u wider again. No offense meant, JD, you've done a good job with the designs overall, it's just my personal preference.
Show Image(http://i.imgur.com/KepuDQM.jpg)Show Image(http://i.imgur.com/26Ifg2e.jpg)Show Image(http://i.imgur.com/QrjHXUR.jpg)Show Image(http://i.imgur.com/FsO0Y2M.jpg)Show Image(http://i.imgur.com/J3OeMXY.jpg)
Show Image(http://i.imgur.com/KepuDQM.jpg)Show Image(http://i.imgur.com/26Ifg2e.jpg)Show Image(http://i.imgur.com/QrjHXUR.jpg)Show Image(http://i.imgur.com/FsO0Y2M.jpg)Show Image(http://i.imgur.com/J3OeMXY.jpg)
So you got one then? I'm leaning either towards a JD45 or a GON still, but this one sure looks nice.
Show Image(http://i.imgur.com/KepuDQM.jpg)Show Image(http://i.imgur.com/26Ifg2e.jpg)Show Image(http://i.imgur.com/QrjHXUR.jpg)Show Image(http://i.imgur.com/FsO0Y2M.jpg)Show Image(http://i.imgur.com/J3OeMXY.jpg)
So you got one then? I'm leaning either towards a JD45 or a GON still, but this one sure looks nice.
I'm setting up the group buy with greatfirewall. This is a sample and for the price it's pretty promising.
Going to iron out the terms with GFW and put up the IC.
do want :thumb:Show Image(http://i.imgur.com/KepuDQM.jpg)Show Image(http://i.imgur.com/26Ifg2e.jpg)Show Image(http://i.imgur.com/QrjHXUR.jpg)Show Image(http://i.imgur.com/FsO0Y2M.jpg)Show Image(http://i.imgur.com/J3OeMXY.jpg)
GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Just wait GL1TCH3D.Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Ah that sucks, price was almost too good to pass up.Guess a boycot is in orderjk just saw it was closed. Do you plan on ever running a GB in the future?
Just wait GL1TCH3D.Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Ah that sucks, price was almost too good to pass up.Guess a boycot is in orderjk just saw it was closed. Do you plan on ever running a GB in the future?
He got the sample some days age.
Awesome! If the price is solid I'll definitely pick one upJust wait GL1TCH3D.Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Ah that sucks, price was almost too good to pass up.Guess a boycot is in orderjk just saw it was closed. Do you plan on ever running a GB in the future?
He got the sample some days age.
I already posted some pics of the sample!
I'm in the middle of exams but I'll solder it up once the exams are done!
I think I've already worked out all the details with GFW but it is my first time running a GB so it will be a learning experience.
Looking to hit 20 units because of the shipping weight breaks.
Awesome! If the price is solid I'll definitely pick one upJust wait GL1TCH3D.Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Ah that sucks, price was almost too good to pass up.Guess a boycot is in orderjk just saw it was closed. Do you plan on ever running a GB in the future?
He got the sample some days age.
I already posted some pics of the sample!
I'm in the middle of exams but I'll solder it up once the exams are done!
I think I've already worked out all the details with GFW but it is my first time running a GB so it will be a learning experience.
Looking to hit 20 units because of the shipping weight breaks.
It'll be around $100 all in (including shipping to canada / USA) but without build or any of that - just PCB / case.
the case is a lot like gon cases or other korean customs with the top and bottom plate with acrylic insert.
It'll be around $100 all in (including shipping to canada / USA) but without build or any of that - just PCB / case.
the case is a lot like gon cases or other korean customs with the top and bottom plate with acrylic insert.
I've never built a board before, so forgive me if this is a stupid question. With just a PCB and case you would still have to add switches, keycaps, and what else?
It'll be around $100 all in (including shipping to canada / USA) but without build or any of that - just PCB / case.
the case is a lot like gon cases or other korean customs with the top and bottom plate with acrylic insert.
I've never built a board before, so forgive me if this is a stupid question. With just a PCB and case you would still have to add switches, keycaps, and what else?
MoreAwesome! If the price is solid I'll definitely pick one upJust wait GL1TCH3D.Firstly, their IC is re-selling our PCB without authorization.GL1TCH3D, are you associated with the IC that just popped up? https://geekhack.org/index.php?topic=77727.0 I'm interested in this board, but I prefer the aluminium plate you have on your prototype. If you are going to start up something separate, I'd rather wait for yours.
Not at all associated.
I just saw that one too. Their price is cheaper but not sure if that includes the shipping from China.
Second,we sell his friend some pcb just for personal use.
The most important is we will not provide pcb for their IC.
Ah that sucks, price was almost too good to pass up.Guess a boycot is in orderjk just saw it was closed. Do you plan on ever running a GB in the future?
He got the sample some days age.
I already posted some pics of the sample!
I'm in the middle of exams but I'll solder it up once the exams are done!
I think I've already worked out all the details with GFW but it is my first time running a GB so it will be a learning experience.
Looking to hit 20 units because of the shipping weight breaks.
It'll be around $100 all in (including shipping to canada / USA) but without build or any of that - just PCB / case.
the case is a lot like gon cases or other korean customs with the top and bottom plate with acrylic insert.
So the group buy for the Golbat 40% keyboard will be just for the PCB and case only? Then we have to source the other components elsewhere?
I'm a total newbie at this whole thing and looking to have the Golbat 40% as my first project. (I don't even know how to solder!).
Will there be instructions provided on how to assemble and program this keyboard?
IC will be going up this weekend!
I haven't built it yet but will soon. Obviously will before I start / collect money in the GB
I talked with GFW and I think I have everything ironed out including colors available, pricing, etc.
IC will be going up this weekend!
I haven't built it yet but will soon. Obviously will before I start / collect money in the GB
I talked with GFW and I think I have everything ironed out including colors available, pricing, etc.
Will this be your first GB? Good luck man :thumb:
I'll probably be in, I have a 40% collection going on and this needs to be added :)
IC will be going up this weekend!
I haven't built it yet but will soon. Obviously will before I start / collect money in the GB
I talked with GFW and I think I have everything ironed out including colors available, pricing, etc.
Will this be your first GB? Good luck man :thumb:
I'll probably be in, I have a 40% collection going on and this needs to be added :)
If you wanna help build it with me that would be cool!
First GB yea xD
Has this gb started/ended?