Author Topic: LightSaver V2 Group Buy  (Read 372218 times)

0 Members and 1 Guest are viewing this topic.

Offline CK Briefs

  • formerly calvins1
  • Posts: 545
  • Location: BC, Canada
Re: LightSaver V2 Group Buy
« Reply #400 on: Thu, 15 May 2014, 01:56:13 »
If they're not shiny, I say the BoWs :s
I think DSA looks better on 60% boards
Current Keyboards: Orion - 62g ergo clears;
A87 PS2AVR - 59g ergo clears; QFR - stock blues

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: LightSaver V2 Group Buy
« Reply #401 on: Thu, 15 May 2014, 02:09:53 »
This or Cherry 1800 BoW caps on this keyboard?

Show Image


If the lights bleed through the sp caps go for the doubleshots. Otherwise stick with DSA dolch. Its a pretty sexy set

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: LightSaver V2 Group Buy
« Reply #402 on: Thu, 15 May 2014, 03:23:46 »
This or Cherry 1800 BoW caps on this keyboard?

Show Image


I find that I have the chance to make a unicorn vomit LED keyboard with this board, in my case I'll go with GMK beige
all the various LED color would shine through that way :D

Unless you are not going to do the same , go with dolch
« Last Edit: Thu, 15 May 2014, 03:25:27 by jokrik »
Quote
Women always figure out the truth. Always. - Han Solo

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: LightSaver V2 Group Buy
« Reply #403 on: Thu, 15 May 2014, 15:05:46 »
This or Cherry 1800 BoW caps on this keyboard?

Show Image

That's what I plan on using!!! Looks soooo good!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline mark_thaddeus

  • Posts: 73
  • Location: On an Island with a Coconut Tree
Re: LightSaver V2 Group Buy
« Reply #404 on: Sat, 17 May 2014, 07:07:02 »
Can I still order with assembly? Can I pay by the 20th of May or is the deadline for payment on June 7?

Offline Blackehart

  • Posts: 316
  • Location: Southern California, USA
  • Booty Aficionado Extraordinaire
Re: LightSaver V2 Group Buy
« Reply #405 on: Sat, 17 May 2014, 09:29:59 »
Can I still order with assembly? Can I pay by the 20th of May or is the deadline for payment on June 7?

 :'( The 30 complete boards are spoken for. I believe you can only get pcb or plate at this junction.

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #406 on: Wed, 21 May 2014, 10:08:53 »
I want this board, patience smells.
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline quochung1989

  • Vintage Cherry Collector
  • Posts: 1187
  • Location: Ebay heaven.
  • Frenzy Classic.
Re: LightSaver V2 Group Buy
« Reply #407 on: Thu, 22 May 2014, 02:01:32 »
Elton5354, Do you full image about Lightsaver V2 PCB? I wanna see some hole on PCB. I just buy PCB and I 'll do case & plate by acrylic :) So i need it to guesstimate my case & plate
I hope you can help :) Thanks

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: LightSaver V2 Group Buy
« Reply #408 on: Thu, 22 May 2014, 10:47:01 »
Elton5354, Do you full image about Lightsaver V2 PCB? I wanna see some hole on PCB. I just buy PCB and I 'll do case & plate by acrylic :) So i need it to guesstimate my case & plate
I hope you can help :) Thanks

would this work?
http://duck0113.tistory.com/93
Quote
Women always figure out the truth. Always. - Han Solo

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #409 on: Thu, 22 May 2014, 22:04:22 »
I think V2 PCB has the same mounting holes as the V1's.  You can check photoelectric's thread for a full PCB picture as well.

I've updated the shipping costs on the spreadsheet. Total costs are available now.  You can check it out.

I'll be invoicing starting tomorrow.

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11450
  • Location: WI
Re: LightSaver V2 Group Buy
« Reply #410 on: Fri, 23 May 2014, 03:45:33 »
I'll be invoicing starting tomorrow.

I don't usually say this, but I'm really excited to pay for this thing.

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: LightSaver V2 Group Buy
« Reply #411 on: Fri, 23 May 2014, 06:17:36 »
I'll be invoicing starting tomorrow.

I don't usually say this, but I'm really excited to pay for this thing.
Who doesnt ;)
Quote
Women always figure out the truth. Always. - Han Solo

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #412 on: Fri, 23 May 2014, 07:44:55 »
Apparently I'm keyboard dumb, anyone know what plate I need for Layout "d" I haven't been paying a whole lot of attention to this thread besides posting in it getting excited, and waiting to pay, have the cash sitting in my car. :o
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline jufa

  • Posts: 127
  • Location: Indonesia
Re: LightSaver V2 Group Buy
« Reply #413 on: Fri, 23 May 2014, 07:48:41 »
I'll be invoicing starting tomorrow.

i'm ready  :)

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #414 on: Fri, 23 May 2014, 07:50:57 »
Elton, any chance we can order the duck blockers individually as well?

Offline Ronnn

  • Posts: 45
  • Location: Toronto
Re: LightSaver V2 Group Buy
« Reply #415 on: Fri, 23 May 2014, 08:41:51 »
Apparently I'm keyboard dumb, anyone know what plate I need for Layout "d" I haven't been paying a whole lot of attention to this thread besides posting in it getting excited, and waiting to pay, have the cash sitting in my car. :o
IIRC, layout d only works without plate

Offline MrChunky

  • Posts: 93
  • Location: Sweet Sweet Switzerland
Re: LightSaver V2 Group Buy
« Reply #416 on: Fri, 23 May 2014, 09:17:43 »
Elton, any chance we can order the duck blockers individually as well?

He said yes to me. But the shipping rates from korea are quite expensive. Almost 30USD to Europe.

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #417 on: Fri, 23 May 2014, 09:40:01 »
Elton is a great host, making my noobness very easily understood. :)

Also excited just ordered my lime green keycaps, and then I just need to find another colour I want to put with it thinking black, but I may want the numpad to be a different colour...

Decisions...

Are they are specialized sets for Lime green/black with special characters or is this just a dream.. :(
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #418 on: Fri, 23 May 2014, 09:49:47 »

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #419 on: Fri, 23 May 2014, 09:52:42 »
This set?
http://geekhack.org/index.php?topic=55644.0

I've been looking at that, however I could use that for my numpad area...

So many options, I guess I'll have to wait and see if there are any extras from my dear friend Bunny, Just don't want to have a whole closet full of keycaps.. Lol
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #420 on: Fri, 23 May 2014, 10:17:55 »
Elton, any chance we can order the duck blockers individually as well?

He said yes to me. But the shipping rates from korea are quite expensive. Almost 30USD to Europe.

Hmm, that's a bit too pricey for me. Does anyone know where I can find keyblockers in CONUS?

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #421 on: Fri, 23 May 2014, 10:25:01 »
Or you can piggyback someone's order given it won't exceed the weight bracket. Each blocker weighs .008 kg. then the person can help you ship it within conus at a good price?

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #422 on: Fri, 23 May 2014, 10:35:47 »
Or you can piggyback someone's order given it won't exceed the weight bracket. Each blocker weighs .008 kg. then the person can help you ship it within conus at a good price?

That would work for me. Would anyone that is getting a Lightsaver in the US volunteer to help me out? I am looking to get 4 of the silver blockers.

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #423 on: Fri, 23 May 2014, 10:38:39 »
If it's only 4 and if no one volunteers I can help you. I can ship it to you for $4 in a bubble mailer.

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #424 on: Fri, 23 May 2014, 10:40:15 »
Now I'm wondering if I need these, I'm thinking I dont.. however these are highly unobtainable usually.. Gah. :(
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #425 on: Fri, 23 May 2014, 10:49:06 »
If it's only 4 and if no one volunteers I can help you. I can ship it to you for $4 in a bubble mailer.

That would be great, thanks Elton.

Offline jufa

  • Posts: 127
  • Location: Indonesia
Re: LightSaver V2 Group Buy
« Reply #426 on: Sat, 24 May 2014, 13:53:28 »
paid. thanks elton

Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: LightSaver V2 Group Buy
« Reply #427 on: Sat, 24 May 2014, 14:18:06 »
I ordered an extra PCB.  Will that effect shipping? (paid V2 invoice).
« Last Edit: Sat, 24 May 2014, 14:21:00 by blighty »
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #428 on: Sat, 24 May 2014, 14:22:19 »
Yeah, I forgot to add them to your invoices for those that ordered a set and extra PCBs/plates...

Each plate is .2kg and PCB is .15 kg

Lightsaver V2 set is 3.1 kg



Offline blighty

  • Posts: 403
  • Location: New York, USA
Re: LightSaver V2 Group Buy
« Reply #429 on: Sat, 24 May 2014, 14:24:49 »
Yeah, I forgot to add them to your invoices for those that ordered a set and extra PCBs/plates...

Each plate is .2kg and PCB is .15 kg

Lightsaver V2 set is 3.1 kg




Okay.  Will you invoice the difference?
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octagon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | TKC 1800 (gateron silent reds) | Mistel MD770 (MX red with GMK silencing clips) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black) | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #430 on: Sat, 24 May 2014, 14:27:28 »
Yes, just the PCB you ordered and PP fee. I'm going to invoice those later when I get the weight of packaging for PCBs/plates alone from them.

Yeah, I forgot to add them to your invoices for those that ordered a set and extra PCBs/plates...

Each plate is .2kg and PCB is .15 kg

Lightsaver V2 set is 3.1 kg




Okay.  Will you invoice the difference?


Offline ryptide11

  • Posts: 66
Re: LightSaver V2 Group Buy
« Reply #431 on: Sat, 24 May 2014, 18:09:45 »
paid. Thank you!

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11450
  • Location: WI
Re: LightSaver V2 Group Buy
« Reply #432 on: Sat, 24 May 2014, 20:14:27 »
Paid!  Pretty stoked for this to arrive (aren't we all??).  :D

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: LightSaver V2 Group Buy
« Reply #433 on: Sat, 24 May 2014, 20:26:33 »
paid!!
Quote
Women always figure out the truth. Always. - Han Solo

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #434 on: Sat, 24 May 2014, 22:12:28 »
I take it you're invoicing the PCB and plate only orders last?

Offline Lastpilot

  • Power stance
  • * Esteemed Elder
  • Posts: 1463
  • Location: Louisiana
Re: LightSaver V2 Group Buy
« Reply #435 on: Sat, 24 May 2014, 22:13:20 »
Will be paying on Friday :3 Thank you!

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #436 on: Sat, 24 May 2014, 22:31:05 »
« Last Edit: Sat, 24 May 2014, 22:42:31 by elton5354 »

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #437 on: Sat, 24 May 2014, 23:51:18 »
Paid, so sad to see the money go, but so excited to see the keyboard come. :D
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: LightSaver V2 Group Buy
« Reply #438 on: Sun, 25 May 2014, 00:00:00 »
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #439 on: Sun, 25 May 2014, 00:05:02 »
I take it you're invoicing the PCB and plate only orders last?

Yes

http://kbdlab.co.kr/index.php?document_srl=31497&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=209&mid=board_housing

Some acrylic housing for the L V2

Excellent. Thank you. One of those has a cad file which I might use to mill or print my own. Any idea if the aluminium housing has drawings available? I'd love to mill one out of stainless or acrylic.

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #440 on: Sun, 25 May 2014, 00:08:17 »
I take it you're invoicing the PCB and plate only orders last?

Yes

http://kbdlab.co.kr/index.php?document_srl=31497&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=209&mid=board_housing

Some acrylic housing for the L V2
Will you be able to get some of those too?

I think it was just an individual who made their own case and shared their CAD file with everyone.

I take it you're invoicing the PCB and plate only orders last?

Yes

http://kbdlab.co.kr/index.php?document_srl=31497&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=209&mid=board_housing

Some acrylic housing for the L V2

Excellent. Thank you. One of those has a cad file which I might use to mill or print my own. Any idea if the aluminium housing has drawings available? I'd love to mill one out of stainless or acrylic.

Maybe you can use those drawings to mill aluminium? Not sure if that works..

http://kbdlab.co.kr/index.php?mid=board_housing&document_srl=33061
« Last Edit: Sun, 25 May 2014, 00:10:27 by elton5354 »

Offline quaxar

  • Posts: 12
Re: LightSaver V2 Group Buy
« Reply #441 on: Sun, 25 May 2014, 02:52:53 »
I sent a PCB and plate order request, I hope to get soldering!

Offline tadbitnerdy

  • Posts: 294
  • Location: Charlestown, IN
Re: LightSaver V2 Group Buy
« Reply #442 on: Sun, 25 May 2014, 06:18:34 »
Paid.  Thanks!

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: LightSaver V2 Group Buy
« Reply #443 on: Sun, 25 May 2014, 08:28:07 »
Paid earlier today.

Looking forward to this beauty :thumb:

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #444 on: Sun, 25 May 2014, 08:54:26 »
****. I wasn't keeping up with the thread after the initial signup.

Can someone please explain the difference between the original plate and the new plate, and is it still possible to select a different colour for the case?

Offline dragonken

  • Posts: 104
  • Location: Hong Kong
Re: LightSaver V2 Group Buy
« Reply #445 on: Sun, 25 May 2014, 09:14:10 »
paid

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #446 on: Sun, 25 May 2014, 10:43:37 »

I sent a PCB and plate order request, I hope to get soldering!

I didn't get your request in

****. I wasn't keeping up with the thread after the initial signup.

Can someone please explain the difference between the original plate and the new plate, and is it still possible to select a different colour for the case?

Original - winkey or winkeyless space bar layout
New - 1800 layout

Yes you may change the colours right now.

If you read a few pages back, you can find the answers you're looking for.

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #447 on: Sun, 25 May 2014, 21:15:11 »
For those ordering PCBs and Plates only in US, you guys might want to combine orders because each shipment is going to be $40-44...

Also orders for these will be closed now.

https://docs.google.com/spreadsheet/pub?key=0Akw9rY8oi1o6dDZDVE9IWWc0OGNkc19hcGx6TjN3c2c&single=true&gid=2&output=html

Offline DamienG

  • Posts: 315
  • Location: Redmond, WA
    • DamienG
Re: LightSaver V2 Group Buy
« Reply #448 on: Sun, 25 May 2014, 21:48:37 »
Just noticed the invoices say 3.9% fees... it's actually 2.9%.  Not that 1% makes a lot of difference but the PayPal fees line doesn't match what PayPal tells us the fee is.

[)amien

Offline elton5354

  • Thread Starter
  • Posts: 2232
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #449 on: Sun, 25 May 2014, 22:01:05 »
Sorry, I just did that for simplicity sake.  Maybe I should receive in CAD next time so I don't have to convert USD into CAD. :)