Author Topic: Tex 60% Case w/ feet?  (Read 68653 times)

0 Members and 1 Guest are viewing this topic.

Offline awhitedev

  • Thread Starter
  • Posts: 393
  • Location: Ohio, USA
Tex 60% Case w/ feet?
« on: Sun, 22 February 2015, 19:47:28 »
I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2371
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Tex 60% Case w/ feet?
« Reply #1 on: Mon, 23 February 2015, 11:05:01 »
I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

No aluminum feet. They come with 4 large Rubber feet, and 6 small Rubber feet.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline drewba

  • Posts: 242
  • Location: IL
Re: Tex 60% Case w/ feet?
« Reply #2 on: Thu, 05 March 2015, 11:39:37 »
I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

No aluminum feet. They come with 4 large Rubber feet, and 6 small Rubber feet.

Came here to find an answer to this question. Just ordered one, thanks!

Offline PunksDead

  • hspernks
  • Posts: 783
  • Location: USA
  • keyboard poser
Re: Tex 60% Case w/ feet?
« Reply #3 on: Sun, 08 March 2015, 19:37:41 »
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




don't come to my funeral, there wont be one

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2371
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Tex 60% Case w/ feet?
« Reply #4 on: Mon, 09 March 2015, 19:12:16 »
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline drewba

  • Posts: 242
  • Location: IL
Re: Tex 60% Case w/ feet?
« Reply #5 on: Mon, 09 March 2015, 21:45:02 »
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Offline Cotay

  • Posts: 157
  • Location: California
Re: Tex 60% Case w/ feet?
« Reply #6 on: Sat, 03 June 2017, 11:09:00 »
So what are the chances that the purple Tex 60% case is ever coming back in stock?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2371
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Tex 60% Case w/ feet?
« Reply #7 on: Mon, 05 June 2017, 12:12:33 »
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.
Show Image


This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline drewba

  • Posts: 242
  • Location: IL
Re: Tex 60% Case w/ feet?
« Reply #8 on: Tue, 06 June 2017, 14:52:01 »
More
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.
Show Image


This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Offline Cotay

  • Posts: 157
  • Location: California
Re: Tex 60% Case w/ feet?
« Reply #9 on: Tue, 06 June 2017, 22:38:12 »
More
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.
Show Image


This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Maybe I'll get a response in 2 years.  ;D

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2371
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Tex 60% Case w/ feet?
« Reply #10 on: Wed, 07 June 2017, 13:19:04 »
More
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.
Show Image


This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Gah...good gravy. So very sorry for that...not sure how we missed seeing the new response after two years...
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2371
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Tex 60% Case w/ feet?
« Reply #11 on: Wed, 07 June 2017, 13:20:48 »
So what are the chances that the purple Tex 60% case is ever coming back in stock?

Not sure of the chances...we are still waiting for production. I'd imagine it will be a good chance, though we won't likely stock many of them.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline drewba

  • Posts: 242
  • Location: IL
Re: Tex 60% Case w/ feet?
« Reply #12 on: Fri, 09 June 2017, 16:59:15 »
More
hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?




Show Image


That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.
Show Image


This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Gah...good gravy. So very sorry for that...not sure how we missed seeing the new response after two years...

I was just goofing around. I purchased the TEX case from you guys awhile back and very happy with it!  :thumb: