Post your Korean Keyboard ^_^

[hwood34]

But I'm quite sure I saw a green one that Bro posted from a while back.

You may have seen it, it didn't exist IRL tho

[Cottonsox]

But I'm quite sure I saw a green one that Bro posted from a while back.

It was photoshopped from his Dark Grey.

[Synjin]

I feel so gullible. T_T

[Flyersfan1]

Never forget:

[Synjin]

My mind keeps imploding now 

[CommonCurt]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Simply beautiful Bro.

Hopefully one day I can manage to get my hands on at least one OTD board.

[Joey Quinn]

I need better stowage for these boards 

Show Image

Family pic without the wrapping please.  :)

[quochung1989]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

You 're using BSP set ?

[Flyersfan1]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

You 're using BSP set ?

I believe so, the little dot on the J key is the giveaway for me.

[Michael]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

You 're using BSP set ?

I believe so, the little dot on the J key is the giveaway for me.

What can I say.... I like nipples. 

[ComradeSniper]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Holy shiiiiiiiiiiiiit

[Michael]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Holy shiiiiiiiiiiiiit

<3

[Michael]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Simply beautiful Bro.

Hopefully one day I can manage to get my hands on at least one OTD board.

[hwood34]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

More

[b7ad]

The rest of the shoot. I am working on an OTD family pic

Beautiful photo's, beautiful board 

[feizor]

Top stuff, must have been much effort to obtain.

[3Love]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Simply beautiful Bro.

Hopefully one day I can manage to get my hands on at least one OTD board.

Show Image

Nice! Haha

[PunksDead]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

another korean kustom? of corsa...  )

[DrHubblePhD]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

another korean kustom? of corsa...  )

[PunksDead]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

another korean kustom? of corsa...  )

Show Image

theres so many people i want to thank...

[lotus1109]

Show Image

How can you getting so many otd boards!!!!!
you use brocaps to trade??? :P
just kidding. I wish I am lucky to get those boards too

[Michael]

another korean kustom? of corsa...  )

[VesperSAINT]

The rest of the shoot. I am working on an OTD family pic

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Literally mfw... Yes, literally...

[jonathanyu]

potato as always.

[rowdy]

Literally mfw... Yes, literally...

Show Image

That's kinda creepy :))

[VesperSAINT]

Show Image

potato as always.

That's a potato I'd look at and eat every time.

Literally mfw... Yes, literally...

Show Image

That's kinda creepy )

) ) )

[Michael]

Show Image

potato as always.

That's an excusable potato :)

[hwood34]

Show Image

potato as always.

[bowji]

I resorted back to lurker mode the past week to build my first custom keyboard, reading and taking in all the info from GH to build my first custom keyboard. My first custom Korean board+practice board: "B.Face"
-"MonsterMask" customs 60% : B.Face
-65g Gateron Clears
-Mirror back (Transparent w/ RGB LED)
-SP DSA Wyse





Special thanks to all those who helped/contributed in the Q&A and Soldering threads <3

[Flyersfan1]

How are you liking the gaterons Bowji? 

[Fnzzy]

I resorted back to lurker mode the past week to build my first custom keyboard, reading and taking in all the info from GH to build my first custom keyboard. My first custom Korean board+practice board: "B.Face"
-"MonsterMask" customs 60% : B.Face
-65g Gateron Clears
-Mirror back (Transparent w/ RGB LED)
-SP DSA Wyse

Show Image

Show Image

Show Image

Special thanks to all those who helped/contributed in the Q&A and Soldering threads <3

Looks great! I assume you got it from winkeyless. Can you tell me what you ordered exactly? I can't seem to figure out the website and what I have to order for a presoldered PCB without switches, what I have to write in comments etc. seems like I am not smart enough  :-X

[zennasyndroxx]

I resorted back to lurker mode the past week to build my first custom keyboard, reading and taking in all the info from GH to build my first custom keyboard. My first custom Korean board+practice board: "B.Face"
-"MonsterMask" customs 60% : B.Face
-65g Gateron Clears
-Mirror back (Transparent w/ RGB LED)
-SP DSA Wyse

Show Image

Show Image

Show Image

Special thanks to all those who helped/contributed in the Q&A and Soldering threads <3

Looks great! I assume you got it from winkeyless. Can you tell me what you ordered exactly? I can't seem to figure out the website and what I have to order for a presoldered PCB without switches, what I have to write in comments etc. seems like I am not smart enough  :-X

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

[Fnzzy]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

[hojin.yi]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

Perfect! except for one thing.
(The model is not B.mini, but B.face!!)
You don't have to add diodes nor resistors if you order the pre-soldering of diodes and resistors.
And after adding extra charge, leave a message "pre-soldering of diodes and resistors for B.face" at Checkout page.
(If you solder it youself, just buy parts.)

[Fnzzy]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

Perfect! except for one thing.
(The model is not B.mini, but B.face!!)
You don't have to add diodes nor resistors if you order the pre-soldering of diodes and resistors.
And after adding extra charge, leave a message "pre-soldering of diodes and resistors for B.face" at Checkout page.
(If you solder it youself, just buy parts.)

Thank you for clarifying!

I know the picture above is a face. I was thinking about buying a mini though

[zennasyndroxx]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

Perfect! except for one thing.
(The model is not B.mini, but B.face!!)
You don't have to add diodes nor resistors if you order the pre-soldering of diodes and resistors.
And after adding extra charge, leave a message "pre-soldering of diodes and resistors for B.face" at Checkout page.
(If you solder it youself, just buy parts.)

Hi hojin

Your new case is nice but cannot use on diffuser have to buy new case again  ) )

[hojin.yi]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

Perfect! except for one thing.
(The model is not B.mini, but B.face!!)
You don't have to add diodes nor resistors if you order the pre-soldering of diodes and resistors.
And after adding extra charge, leave a message "pre-soldering of diodes and resistors for B.face" at Checkout page.
(If you solder it youself, just buy parts.)

Hi hojin

Your new case is nice but cannot use on diffuser have to buy new case again  ) )

Do you have "IF Acrylic case"?
At the moment only BBB Acrylic case is compatible with diffuser.

[zennasyndroxx]

Presoldered RGB with controller for around 60 if you're talking about bface or bthumb. As for case, it depends on what you prefer. For me, the diffuser is the best looking one with the RGB lighting below.

So for a presoldered b.mini (with rgb LED strip) ill buy the pcb, choose yes for solder controller and RGB leds, buy case, then buy 80 resistors (in case I want switch led later on) and 80 diodes and then add $18 extra charge for soldering the diodes and another $17 extra charge for soldering the resistors? is that how it works?

sorry for hijacking this thread for this

Perfect! except for one thing.
(The model is not B.mini, but B.face!!)
You don't have to add diodes nor resistors if you order the pre-soldering of diodes and resistors.
And after adding extra charge, leave a message "pre-soldering of diodes and resistors for B.face" at Checkout page.
(If you solder it youself, just buy parts.)

Hi hojin

Your new case is nice but cannot use on diffuser have to buy new case again  ) )

Do you have "IF Acrylic case"?
At the moment only BBB Acrylic case is compatible with diffuser.

Nope. Wanted to get the IF acrylic case. Maybe buying another board 

[bowji]

How are you liking the gaterons Bowji? 

Theyre great! TBH I wasnt a fan of linear switches so I modded my red switch num pad I had. However the gateron switch has made me a believer of linear switches. Comparing it to MX reds and blacks, the Gateron clears are so much better and smoother along with 65g sprit springs, they make it perfect. I still prefer tactile switches but if I were to choose among the linears, gateron would be my #1 choice.

I resorted back to lurker mode the past week to build my first custom keyboard, reading and taking in all the info from GH to build my first custom keyboard. My first custom Korean board+practice board: "B.Face"
-"MonsterMask" customs 60% : B.Face
-65g Gateron Clears
-Mirror back (Transparent w/ RGB LED)
-SP DSA Wyse

Show Image

Show Image

Show Image

Special thanks to all those who helped/contributed in the Q&A and Soldering threads <3

Looks great! I assume you got it from winkeyless. Can you tell me what you ordered exactly? I can't seem to figure out the website and what I have to order for a presoldered PCB without switches, what I have to write in comments etc. seems like I am not smart enough  :-X

I ordered the B.FaceR PCB, the "R" is the one with the switches rotated so that the LED is on top. I had to message Monstermask through KBDlab to get diodes and resistors presoldered for a little extra, but Im sure you can email him directly with any inquiries. The top RGB LED is pre soldered but the bottom row has to be bought separately if you want two rows of RGB backlights, it comes with wires so soldering them on is simple. You will also need to order bolts and screws from the winkeyless store if you plan to buy the housing from "hanaacryl". And the rest is same as any other custom boards (stabilizer, switches, etc).

Hope that helped  ;)


Someone messaged me about the layers on the housing, they are a combination of "half transparent white" and "half mirror". The "half transparent white" is what gives the frosted look and the "half mirror" is what turns transparent with backlight.

(Back:"half mirror" w/o backlight, Raisers: "half transparent white")

[zennasyndroxx]

How are you liking the gaterons Bowji? 

Theyre great! TBH I wasnt a fan of linear switches so I modded my red switch num pad I had. However the gateron switch has made me a believer of linear switches. Comparing it to MX reds and blacks, the Gateron clears are so much better and smoother along with 65g sprit springs, they make it perfect. I still prefer tactile switches but if I were to choose among the linears, gateron would be my #1 choice.

I resorted back to lurker mode the past week to build my first custom keyboard, reading and taking in all the info from GH to build my first custom keyboard. My first custom Korean board+practice board: "B.Face"
-"MonsterMask" customs 60% : B.Face
-65g Gateron Clears
-Mirror back (Transparent w/ RGB LED)
-SP DSA Wyse

Show Image

Show Image

Show Image

Special thanks to all those who helped/contributed in the Q&A and Soldering threads <3

Looks great! I assume you got it from winkeyless. Can you tell me what you ordered exactly? I can't seem to figure out the website and what I have to order for a presoldered PCB without switches, what I have to write in comments etc. seems like I am not smart enough  :-X

I ordered the B.FaceR PCB, the "R" is the one with the switches rotated so that the LED is on top. I had to message Monstermask through KBDlab to get diodes and resistors presoldered for a little extra, but Im sure you can email him directly with any inquiries. The top RGB LED is pre soldered but the bottom row has to be bought separately if you want two rows of RGB backlights, it comes with wires so soldering them on is simple. You will also need to order bolts and screws from the winkeyless store if you plan to buy the housing from "hanaacryl". And the rest is same as any other custom boards (stabilizer, switches, etc).

Hope that helped  ;)


Someone messaged me about the layers on the housing, they are a combination of "half transparent white" and "half mirror". The "half transparent white" is what gives the frosted look and the "half mirror" is what turns transparent with backlight.

Show Image

(Back:"half mirror" w/o backlight, Raisers: "half transparent white")

is the half mirror option available in hanaacryl or you sticked a film on your own? if it's a film, what film did you use?

[bowji]

is the half mirror option available in hanaacryl or you sticked a film on your own? if it's a film, what film did you use?

The half mirror is a acrylic color option hanaacryl offers, the "quotes" were a direct translation. One thing to note is that they only offer that color in a specific thickness; T3 IIRC.

[shawn24]

[Joey Quinn]

Show Image

Show Image

Show Image

I really need money...

Sick board bro.

[VesperSAINT]

Show Image

Show Image

Show Image

...................................... Wow... dayum... I'm not jealous at all of that keyboard... NOPE... not even a lil...


........ but I'd totally make that my first Korean custom...

[hwood34]

Show Image

Show Image

Show Image

[billnye]

Show Image

Show Image

Show Image

...................................... Wow... dayum... I'm not jealous at all of that keyboard... NOPE... not even a lil...


........ but I'd totally make that my first Korean custom...

Korean no kustom

#vesperlife

[b7ad]

Man that RE  love the RE so much... 

[VesperSAINT]

Korean no kustom

#vesperlife

EXCEPT ALL THE BOARDS I'VE WORKED ON WOULD TECHNICALLY BE A KOREAN CUSTOM BECAUSE I'M KOREAN...

[DrHubblePhD]

Show Image

Show Image

Show Image

looks great man, it was a beautiful board to put together, and that's without the case  :))

[Zeal]

Show Image

Show Image

Show Image

Ah, so that's what RE stands for. Beautiful board, Shawn! :thumb: