Post your Korean Keyboard ^_^

[Jokrik]

Just waiting for the gb approval

Just wondering
does the recent disappearance of Korean GB starter have an impact on this?
the approval seems to take longer

What do you mean by this?

Just assuming since the past druger problem and recent tx1800, feel like some part of the community lose trust on new korean gb (unless it run by someone reputable like Elton, etc) . And might change the mod concern when accepting future korean gb

Now that it is on the run, I might be wrong.

I lm saying this because I'm also the victim, where my money has been taken and nothing being send over , not the right place to discuss here

[jerue]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears




Will have to get a shot with keycaps when I'm not so tired 

[ideus]

Finally able to post my own board in this thread! I've been eyeing a nice custom Korean keyboard ever since I got into keyboards and finally built one over the course of last week:

Show Image

Show Image

Show Image

It is really beautiful, congratulations. You can tease the bros with details on switches, lubing, stickers, springs and stems, just to help our jealousy to grow. :thumb:

[FrostyToast]

They can be the pcb have holes for PCB mounted switches. At least for the B.face

When people say the switches are 'PCB mounted' they typically mean that there is no plate involved: The switches are soldered to the PCB and the PCB itself is mounted to the casing.

The Winkeyless cases don't allow for the PCB to mount directly to them - they rely on the plate for this. So, while you can use the PCB mount switches with the extra plastic pins, it's still a plate mounted board.

It still could be possible to get a custom cut half plate.
Though, that might look funny with the floating cap design.

[billnye]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

Looks nice . Fanciest thing in the whole state of South Carolina .

[jerue]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

Looks nice . Fanciest thing in the whole state of South Carolina .

Wish I was as fancy as this guy though

[nguyenkimtam]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

I really wish i have one board with vintage clear 

[DanielT]

My nice wikeyless face.B 60%  Old MX Black, purple JD plate and HyperFuse


I still have to swap the spring with some lighter 60g and solder the resistors and LED's. I have some nice pink LED's ready for this board. Also a nice case would be good, but will have to wait for the moment.

This will be the last keyboard I build with a plate, hate plates, if a stab wire jumps you have to pray to all the gods to fix it

[pichu23]

My nice wikeyless face.B 60%  Old MX Black, purple JD plate and HyperFuse

Show Image

Show Image

I still have to swap the spring with some lighter 60g and solder the resistors and LED's. I have some nice pink LED's ready for this board. Also a nice case would be good, but will have to wait for the moment.

This will be the last keyboard I build with a plate, hate plates, if a stab wire jumps you have to pray to all the gods to fix it

Since you're using the plate by JD, wouldn't there be enough room to fix the stabs without desoldering?
I just roughly compared the one to my GON and it seems like it is plausible.

[DanielT]

My nice wikeyless face.B 60%  Old MX Black, purple JD plate and HyperFuse

Show Image

Show Image

I still have to swap the spring with some lighter 60g and solder the resistors and LED's. I have some nice pink LED's ready for this board. Also a nice case would be good, but will have to wait for the moment.

This will be the last keyboard I build with a plate, hate plates, if a stab wire jumps you have to pray to all the gods to fix it

Since you're using the plate by JD, wouldn't there be enough room to fix the stabs without desoldering?
I just roughly compared the one to my GON and it seems like it is plausible.

There is enough space to fix it without desoldering. But it's still a pain to do it )
Other than that the feel and look of the board os very nice, maybe a bit too stiff for my taste, I like the PCB mount feel more.
I have swapped the springs and I will see today how it drives.

[jcoffin1981]

This is  a V60 with Gateron Browns and Leopold keycaps.  I love the board and keycaps, but dislike the switches.  I much prefer Cherry browns over these.  The Gaterons are considerably lighter.

[alienman82]

removed.

[E3E]

Took a better picture today:  OTD Cheat 62g clears, OG Red Desko, OTD Alu esc.

Show Image

Gotta love that wine red color.  :thumb:

[pr0ximity]

Took a better picture today:  OTD Cheat 62g clears, OG Red Desko, OTD Alu esc.

Show Image

Love love love those aluminum Esc keys. OTD caps are always so classy.

[bocahgundul]

This is  a V60 with Gateron Browns and Leopold keycaps.  I love the board and keycaps, but dislike the switches.  I much prefer Cherry browns over these.  The Gaterons are considerably lighter.

Show Image

That's not a korean keyboard

[Photekq]

Took a better picture today:  OTD Cheat 62g clears, OG Red Desko, OTD Alu esc.

Show Image

You need to align those layers properly.

[alienman82]

removed.

[Photekq]

do I?

ye

[alienman82]

removed.

[Photekq]

Still nice, no?

ye

[bocahgundul]

Photekq may I ask you what board have a vintage mx brown or clear

[Photekq]

Photekq may I ask you what board have a vintage mx brown or clear

Vintage browns - Cherry MX5000, almost certainly G80-1838 too although I haven't confirmed it myself
Vintage clears - Too many to list. Anything with clears made in the early 90s I guess.

[bocahgundul]

Photekq may I ask you what board have a vintage mx brown or clear

Vintage browns - Cherry MX5000, almost certainly G80-1838 too although I haven't confirmed it myself
Vintage clears - Too many to list. Anything with clears made in the early 90s I guess.

Thank you for the quick answer photekq

[nasby99]

I have missed this board so much . Huge thanks to sethk for fixing it for me.

Show Image

Show Image

Show Image

what's keycap with your board?   :eek:
it looks stunning.. .-_-++

[whentheclouds]

TA alphas (maybe?) and blue modpack from bill's own gb

[CommonCurt]

TA alphas (maybe?) and blue modpack from bill's own gb

Yep.  I think that's correct.

[swimmingbird]

TA alphas (maybe?) and blue modpack from bill's own gb

Yep.  I think that's correct.

I thought the alphas looked a little too light to be TA - my thoughts were Olivetti

[CommonCurt]

TA alphas (maybe?) and blue modpack from bill's own gb

Yep.  I think that's correct.

I thought the alphas looked a little too light to be TA - my thoughts were Olivetti

Oh yeah. I forgot he had a GMK Olivetti set. 

[jaffers]

Soon I will join this glorious thread, then I will finish my initiation into GH. I've already done the blood ritual

[whentheclouds]

good call swim, must be sherry's olivetti? i totally forgot that exists

e: blue on camera is soo deceptive

[Photekq]

Oh yeah. I forgot he had a GMK Olivetti set.

He doesn't. It's TA.

[CommonCurt]

Oh yeah. I forgot he had a GMK Olivetti set.

He doesn't. It's TA.

My first assumption was right. My mistake.  The alphas do look lighter in that picture.

[swimmingbird]

Oh yeah. I forgot he had a GMK Olivetti set.

He doesn't. It's TA.

Looks like I found a use for my second set of TA

[CommonCurt]

Oh yeah. I forgot he had a GMK Olivetti set.

He doesn't. It's TA.

Looks like I found a use for my second set of TA

Yep, I've seen a few people say that's what they are going to use those mods with. I'll be switching mine between TA and Dolch alphas.

[henz]

Just put some JTK keycaps on my LZ fe. These are by far the best looking and feeling keycaps i own atm. So incredibly happy.

[billnye]

Oh yeah. I forgot he had a GMK Olivetti set.

He doesn't. It's TA.

My first assumption was right. My mistake.  The alphas do look lighter in that picture.

Yea my white balance was off and that's why it looks so light. Vesper's photos are more color accurate.

[Johan]

Just put some JTK keycaps on my LZ fe. These are by far the best looking and feeling keycaps i own atm. So incredibly happy.

Show Image

Too sick :O

[rowdy]

Just put some JTK keycaps on my LZ fe. These are by far the best looking and feeling keycaps i own atm. So incredibly happy.

Show Image

The darker RGB set goes well with it:)

[jonathanyu]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

what is that yellow/orange thing on the esc key?

[BunnyLake]

Just put some JTK keycaps on my LZ fe. These are by far the best looking and feeling keycaps i own atm. So incredibly happy.

Show Image

looks great

[Steezus]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

what is that yellow/orange thing on the esc key?

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.
Edit: Messed up damn quoting.

[jerue]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.

what is that yellow/orange thing on the esc key?

IIRC it's copper around the switch itself, it's used to power the LED on the ESC key. When I got the board the copper was cut, I think the LED just pulsates so I haven't bothered to fix it back up.

[jonathanyu]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

what is that yellow/orange thing on the esc key?

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.
Edit: Messed up damn quoting.

yeah I know the pcb doesn't compatible with led. didn't expect someone would do a mod on the switch but not the pcb though 

[Steezus]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

what is that yellow/orange thing on the esc key?

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.
Edit: Messed up damn quoting.

yeah I know the pcb doesn't compatible with led. didn't expect someone would do a mod on the switch but not the pcb though 

It is quite an odd way to do but it worked haha, but as Jerue said the copper connection is now cut.

[alienman82]

removed.

[ghostjuggernaut]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

what is that yellow/orange thing on the esc key?

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.
Edit: Messed up damn quoting.

yeah I know the pcb doesn't compatible with led. didn't expect someone would do a mod on the switch but not the pcb though 

I was the one who removed the wiring.

The prior owner had the two leds installed on the switch.  They both light up simultaneously, but I didn't like how they looked with most sets, so I disabled them.  It is just copper tape in two sections, and two smd leds soldered onto the tape in series.  It's pretty cool how it was done, just not something I had liked.

[E3E]

This one is pretty Korean, though the switches are Japanese.











Now all I'm waiting for is my red Hammer case. Aww ye. Typing on it feels so smooooth. It's crazy. Switches and LEDs are hotswappable. This has been a very long project.

[pr0ximity]

Just realized I never posted my board in here D:

456GT w/62g vintage ergo clears

Show Image

Show Image

Will have to get a shot with keycaps when I'm not so tired 

It's an LED, I believe there is two actually, red and blue LED on the switch. The PCBs wasn't compatible with in-switch LEDs.

what is that yellow/orange thing on the esc key?

IIRC it's copper around the switch itself, it's used to power the LED on the ESC key. When I got the board the copper was cut, I think the LED just pulsates so I haven't bothered to fix it back up.

Shame, those pulsing Esc's are awesome. I need to take a video of mine, translucent cap on top and I don't think there's anything that looks better.

[Joey Quinn]

This one is pretty Korean, though the switches are Japanese.

Show Image

Show Image

Show Image

Show Image

Show Image

Now all I'm waiting for is my red Hammer case. Aww ye. Typing on it feels so smooooth. It's crazy. Switches and LEDs are hotswappable. This has been a very long project.

I need a green or yellow alps board, looks great man.

[Steezus]

Orion v2 w/ OTD Red Alert 1 by Steve N, on Flickr


Orion v2 w/ OTD Red Alert 2 by Steve N, on Flickr


Orion v2 w/ OTD Red Alert 3 by Steve N, on Flickr

Orion v2 is complete! I just need to get a good camera so I can get some better pics.