Would love a kmac 2! springs! stickers! and switches! When would this be happening? Also how many would be offered?
Would love a kmac 2! springs! stickers! and switches! When would this be happening? Also how many would be offered?
It'll happen within this month. I am not so sure, but it would be very limited.
This month? Does that mean there's only 5 days? haha
I want a red KMAC 1.2 please and a silver KPAD
Do you know if there is going to be a KPAD 2 or 1.2???
i want a red 1.2 because it exclusive to the 1.2 i have a silver KMAC LE and titanium KMAC, trying to round out the collection :DI want a red KMAC 1.2 please and a silver KPAD
Do you know if there is going to be a KPAD 2 or 1.2???
And here he is :D I know you've been dreaming of Kmac 2! Oh wait....want the red instead now? :p
i want a red 1.2 because it exclusive to the 1.2 i have a silver KMAC LE and titanium KMAC, trying to round out the collection :DI want a red KMAC 1.2 please and a silver KPAD
Do you know if there is going to be a KPAD 2 or 1.2???
And here he is :D I know you've been dreaming of Kmac 2! Oh wait....want the red instead now? :p
I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.
I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.
I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.
A titanium kpad 2 to match Kmac 2 would be amazing.
o and you mean this time get the to titaniums to actually match?I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.
A titanium kpad 2 to match Kmac 2 would be amazing.
what fer reals? Jaw drops on floorI might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.I might have to do a Pre-Order like the LZ GH. They will be listed on my web-site.ok well ill give you monies for a red KMAC 1.2 right now then :D
No KMAC Pad 1.2/2 (at least I don't think so). The KMAC Pad as a flat piece is already nice enough, but if they did make a Pad 2, then it would just be slanted.
They could redesign it a bit maybe add a few more key to where the fn switch is. KMAC pad 2 would be a must to go with a kmac 2 non matching cases would be a turn off.
A titanium kpad 2 to match Kmac 2 would be amazing.
I can make this happen :)
I will bring more Korean aluminum cases, and he will be my provider for Cherry keycaps.I think you meant..
sherry please run this at least initially exactly how the LZGH was done. As in a set time and date and a limited number per person with money due either at the time of order or very shortly after.
Would you be willing to ship international?
Cool, am definitely interested, though a winkey-version is preferred.both of them are changeable via blocks
It doesnt contain switches or stabilizers, Am I right?
It doesnt contain switches or stabilizers, Am I right?
These look VERY nice, but I am assuming that one including everything I need to have a working keyboard, would be far out of my price range lol.
These look VERY nice, but I am assuming that one including everything I need to have a working keyboard, would be far out of my price range lol.
What do you mean by that? I think I am misreading something right here. The item contains the case, plate, pcb, and all the screws needed. The package also includes the tool to screw in the screws as well (I hope I am not wrong here).
You do not need to get another keyboard to put in this case.
Any idea what the ETA on this buy is?
I'm really hoping its in at least a few good weeks time. Just drilled my wallet empty with my interest in the latest LZ GB/Phantom currently ongoing.
I'll be almost over 1k for these last 2 weeks on keyboard related goods haha.
Also good pricing on the switches. Lets hope we can get more variety!
Lol i meant buying switches, stabilisers, soldering flux and a soldering iron haha.
TheProf sends sherry $400Any idea what the ETA on this buy is?
I'm really hoping its in at least a few good weeks time. Just drilled my wallet empty with my interest in the latest LZ GB/Phantom currently ongoing.
I'll be almost over 1k for these last 2 weeks on keyboard related goods haha.
Also good pricing on the switches. Lets hope we can get more variety!
The approximate pricing is around $385 + approximately $16 (assuming Large Flat Rate for USPS) which would total to be $401. The original cost was around $360 + shipping which would be about $57.31 via EMS which would total to $417.31. I would able to save you guys a little money on shipping because I am bringing them all here together.
This is only an approximation, and it would be something close to that.
With what Sherry just added re: approximate pricings, I'd say its closer to $550 TYD if you are international. Provided you need soldering and what not.
Thats why I'm not a fan of shipping (or in fact the distance between where I am and where the majority of you guys are (US))
What would be the shipping route for someone that requires soldering?
Korea->sherry->alar->buyer?
That would incur some extra shipping i'd imagine
What about the kpad? I hope all this is worth your time!
I would like a silver one possibly but im WAY more interested in a KPAD 1.2 and KPAD 2What about the kpad? I hope all this is worth your time!
Of course you guys are worth my time! I have no idea about the K Pad yet haha. I recently talked to ekw, and he said it costed around $190. I really do not like the price on it. If some of you guys want it, then I will do it.
Definitely down the track for me, they look so nice :) That Sanctuary keyset has left my wallet empty, with Uni coming up I will have to settle with a CM storm to house that Santuary set for now. Maybe even a WASD depending on the price without keycaps.
Current budget ~$100 lol
I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
the reason i asked was most people before buying or building one of these have tried all the switches already and know what switch they prefer due to the cost of one of these> I guess this just means that these are becoming much more available and the craze.I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
I still have several switches I want to try and I don't have a personal favorite so I still switch from time to time in my Poker.
edit: ty for the answer.
the reason i asked was most people before buying or building one of these have tried all the switches already and know what switch they prefer due to the cost of one of these> I guess this just means that these are becoming much more available and the craze.I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
I still have several switches I want to try and I don't have a personal favorite so I still switch from time to time in my Poker.
edit: ty for the answer.
So do we have to wait for the fancy form or indicate interest here ?sherry said it would be up on his website I believe
I would love a titanium kmac 2 but im not sure ill be able to afford it after buying the lz-gh and ergodox and most likely an olivetti set from sherry :( ski resort pay is not conducive to custom keyboard collecting
I guess we'll just have to see how crazy im willing to get with my FS thread!
what is sherrys website? Does anyone have a link?
How much will the KMAC2 weigh approximately?Id tell you but I dont have one yet to weigh :(
is the difference between kmac2 and kmac just design? I mean pcb and functionality is the same right?im wondering if the PCb is the same my self I did ask earlier in the thread but never got an answer
I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
yo uwill need to solder a bunch and SMD for the diodes I wouldnt take this on if you arnt semi experienced.I can't keep track of all the custom boards in my head anymore. You can change the switches on a KMAC 2 without soldering, correct?thats correct but I dont understand why people put all this emphasis on swapping switches personally
Hey cool.
I'm new to this but I'd like to try out some MX clears on a new board.
So is the following all I need:
- Get KMAC 2
- Get a batch of MX clears (maybe from the DT gb) - I should get the plate mounted ones vs the PCB mounted ones?
- Get some stabilisers
- Get a keycap set
That's it? I should be able to assemble it without any soldering? (no need to get the equip and practice??)
SMD was not a requirement for KMAC 1, I highly doubt it is for 2....o yea, foorgot it would be SMD or through hole... ive always done SMD diodes for them
No 1.25 mod version? The menu key is extremely useful and not having super keys is downright insane.nope but why not remap right win as menu, these keyboards are 100% programmable...
It looks like GB organizer of KMAC has started a new business and partnered with Sherryton. From what I read at KBDMania, the deal is exclusive that Sherryton is going to be only distributor of KMACs in the US.
I would think there would be plenty KMACs in the market.
Plenty supply of Cherry caps + custom keyboards is what I dreamed of. I am pretty happy how all turned out. I just hope the prices are not jacked up though.
It looks like GB organizer of KMAC has started a new business and partnered with Sherryton. From what I read at KBDMania, the deal is exclusive that Sherryton is going to be only distributor of KMACs in the US.
I would think there would be plenty KMACs in the market.
Plenty supply of Cherry caps + custom keyboards is what I dreamed of. I am pretty happy how all turned out. I just hope the prices are not jacked up though.
I talked about the prices already. Also, the KMAC will still be limited, very limited!
It looks like GB organizer of KMAC has started a new business and partnered with Sherryton. From what I read at KBDMania, the deal is exclusive that Sherryton is going to be only distributor of KMACs in the US.
I would think there would be plenty KMACs in the market.
Plenty supply of Cherry caps + custom keyboards is what I dreamed of. I am pretty happy how all turned out. I just hope the prices are not jacked up though.
I talked about the prices already. Also, the KMAC will still be limited, very limited!
Really? Why start a business and only produce limited supply? I don't understand it very well.. If that is the way it is for now, it may makes more sense though.
It looks like GB organizer of KMAC has started a new business and partnered with Sherryton. From what I read at KBDMania, the deal is exclusive that Sherryton is going to be only distributor of KMACs in the US.
I would think there would be plenty KMACs in the market.
Plenty supply of Cherry caps + custom keyboards is what I dreamed of. I am pretty happy how all turned out. I just hope the prices are not jacked up though.
I talked about the prices already. Also, the KMAC will still be limited, very limited!
Really? Why start a business and only produce limited supply? I don't understand it very well.. If that is the way it is for now, it may makes more sense though.
So when do you know the final pricing and if we able to buy ?
So when do you know the final pricing and if we able to buy ?
Approximate price for 2 is $400 and 1.2 is $320. I believe that's just pcb/plate/case. Still need parts(switches etc), build it, and final shipping.
Sorry for my dumbness but whats the difference between 1.2 and 2 kmac. Also kmac 1.2 assembled+international would be 450$ I assume?
Thanks for quick response!
If I'm going to buy kmac 1.2, everyone will think I'm crazy for spending so much on a keyboard... I would be bullied so ****ing hard :S
Thanks for quick response!
If I'm going to buy kmac 1.2, everyone will think I'm crazy for spending so much on a keyboard... I would be bullied so ****ing hard :S
Programmer-types who sit at a keyboard all day would shut right up once they tried it.
Thanks for quick response!
If I'm going to buy kmac 1.2, everyone will think I'm crazy for spending so much on a keyboard... I would be bullied so ****ing hard :S
Programmer-types who sit at a keyboard all day would shut right up once they tried it.
I don't know if I can agree with you there. There are programmers at my work that have tried my Filco, and although they like it couldn't see themselves spending that much on a keyboard. And this is for a Filco. These guys have more money than I do, so that isn't an issue. People just place value on different things.
that being said:
I'M SOOOOOOOOOOOOOOO GETTING ONE, KMAC 2 TITANIUM.
I was actually hoping the LZ-GH would have been that color of grey
Would the 1.2 have an option for a winkeyless case?I don't think so. I think the layout is 84 or 86 depending on how you build it. Check out DanGWanG's pics of his KMAC 1.2 in the gallery subforum
I was actually hoping the LZ-GH would have been that color of greyYou should check out the thread again, the picture has been updated and the grey looks different
Maybe you're right but is it really such a big difference between filco and kmac? I know kmac has alluminium case, is fully programmable and has some lights, but is it really worth it?Thanks for quick response!
If I'm going to buy kmac 1.2, everyone will think I'm crazy for spending so much on a keyboard... I would be bullied so ****ing hard :S
Programmer-types who sit at a keyboard all day would shut right up once they tried it.
Oh and does kmac also include cable? I hope it does :Snope
Yes, my apologies. For those that are on the fence about the LZ-GH or a KMAC 1.2 or 2. What are the differences between the two brands? If I understand correctly, the LZ-GH only has a few LED's, whereas the KMAC has more. Both are fully programmable? Case is obviously a little different. What are any other differences between the 2?
Yes, my apologies. For those that are on the fence about the LZ-GH or a KMAC 1.2 or 2. What are the differences between the two brands? If I understand correctly, the LZ-GH only has a few LED's, whereas the KMAC has more. Both are fully programmable? Case is obviously a little different. What are any other differences between the 2?
The real question to ask is what is the difference between the A.87 PCB and Kmac PCB as the case designs are just different in look, weight, style, ect.
Both PCB is fully programmable.
Both PCB uses Cherry PCB mount stabs
Both PCB can be had in 84key/86key/87key
A.87 has 2 types of PCB, Full LED PCB and Regular PCB.
Hopes this help.
~Boost
Yes, my apologies. For those that are on the fence about the LZ-GH or a KMAC 1.2 or 2. What are the differences between the two brands? If I understand correctly, the LZ-GH only has a few LED's, whereas the KMAC has more. Both are fully programmable? Case is obviously a little different. What are any other differences between the 2?
The real question to ask is what is the difference between the A.87 PCB and Kmac PCB as the case designs are just different in look, weight, style, ect.
Both PCB is fully programmable.
Both PCB uses Cherry PCB mount stabs
Both PCB can be had in 84key/86key/87key
A.87 has 2 types of PCB, Full LED PCB and Regular PCB.
Hopes this help.
~Boost
So this buy will have an 87 key ANSI layout option (1.25x3/6.25/1.25x4 bottom row)? If so I am in.
KMAC 2 (I believe) is also full aluminum and hard anodized. Layouts are the same as 1.2. But the bottom case is different. The feet are integrated into the case and there are holes where you can install small stands to further support the plate+pcb.
However the plate does not allow for access to screwing down the PCB to the standoffs. It is purely an option for going plate-less.Ah gotcha. Is it possible to screw the PCB to the standoff AND use a plate? Dat stability
Also the 2 doesn't so much have feet built in, more along the lines of the entire bottom being wedge shaped.Yes, that's what I meant. You worded it a lot clearer though :P
Yes, my apologies. For those that are on the fence about the LZ-GH or a KMAC 1.2 or 2. What are the differences between the two brands? If I understand correctly, the LZ-GH only has a few LED's, whereas the KMAC has more. Both are fully programmable? Case is obviously a little different. What are any other differences between the 2?
The real question to ask is what is the difference between the A.87 PCB and Kmac PCB as the case designs are just different in look, weight, style, ect.
Both PCB is fully programmable.
Both PCB uses Cherry PCB mount stabs
Both PCB can be had in 84key/86key/87key
A.87 has 2 types of PCB, Full LED PCB and Regular PCB.
Hopes this help.
~Boost
Ah gotcha. Is it possible to screw the PCB to the standoff AND use a plate? Dat stability
Was the software updated for the 1.2/2???
is the KMAC 1.2 / KMAC 2 programmable without a korean forum account?
yea i believe i have the lastes software from it which bi had to dig around to get because the link was bad but i think that spftware is from before christmas i didnt know if the updated it for the v1.2/2Was the software updated for the 1.2/2???
Yesis the KMAC 1.2 / KMAC 2 programmable without a korean forum account?
I believe Litster has a thread for that somewhere.
here's the kmac diy topic:Was the software updated for the 1.2/2???
Yesis the KMAC 1.2 / KMAC 2 programmable without a korean forum account?
I believe Litster has a thread for that somewhere.
KMAC 2 will be up shortly. It was suppose to be up today, but our PayPal is being reviewed.So we just submit an order through origniativeco.com? How many of these will be up for grabs? =)
KMAC 2 will be up shortly. It was suppose to be up today, but our PayPal is being reviewed.So we just submit an order through origniativeco.com? How many of these will be up for grabs? =)
Aight. Hopefully things will get resolved quickly! Good luck!KMAC 2 will be up shortly. It was suppose to be up today, but our PayPal is being reviewed.So we just submit an order through origniativeco.com? How many of these will be up for grabs? =)
No, we will have to wait for everything to get resolved. I am thinking 30-40.
Yeah you mentioned something similar to what boost did with the GH. Is that still going to happen?
as in specify a time youll open up beforehand, where its going to be, how much its going to to cost, and how many are available.Yeah you mentioned something similar to what boost did with the GH. Is that still going to happen?
What do you mean?
as in specify a time youll open up beforehand, where its going to be, how much its going to to cost, and how many are available.Yeah you mentioned something similar to what boost did with the GH. Is that still going to happen?
What do you mean?
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.So in the timespan of the phantom 2 there has been announced the LZGH and KMAC. Yay for tax returns!
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
So how can I place my order ? I really would like to buy two :)
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
So how can I place my order ? I really would like to buy two :)
At this time, 1 per person. If there is any leftovers of another type of keyboard, then you will have to wait if you wanted it. For example: You ordered a KMAC 2, but you want both KMAC 2 and 1.2. You will have to wait a week if you are highly interested in getting both. That way, everyone has a chance at a custom aluminum keyboard.
84/86 ANSI
not so sure on an 87 ANSI since it's never been mentioned.
It might be possible.84/86 ANSI
not so sure on an 87 ANSI since it's never been mentioned.
I had PM'ed sherryton earlier about the possibility of an 87 key ANSI layout, at that time he mentioned that layouts weren't 100% decided/known yet. I could deal w/ an 86 key layout, just would prefer 87 if possible. My skin in the game is that if the only option is 84/86, I'll need to update my MKC spacebar order to cherry profile 7x instead of 6.25x, and likely order a set of the 1.5 RGB mods from originative.
It might be possible.
http://www.kbdmania.net/xe/index.php?mid=photo&page=3&document_srl=5924636 (http://www.kbdmania.net/xe/index.php?mid=photo&page=3&document_srl=5924636)
WFD's KMAC2's look like 87 layout
Ugly orange blockers :D
Sherryton, you already have these at hand?Ugly orange blockers :D
The ones I received, the blockers have the same tone as the case.
Sherryton, you already have these at hand?Ugly orange blockers :D
The ones I received, the blockers have the same tone as the case.
Ugly orange blockers :D
The ones I received, the blockers have the same tone as the case.
Red 1.2?
Whoopie! Any assembly services, sherry? ;D
Hey guys, what does assembly services entail? What would I still need to do to get the kb working after the assembly service?I'm pretty sure nothing. KMACs should come with a default firmware, if not, you'd need to load that.
How about lubing and stickers? I understand that will be a lot of work involved.
Do you have the KMAC 2's in hand ready to ship?
Can we get an approximate date on when you will be selling/shipping these. I want to make sure I have enough money left over. However, if it is too long from now I may be unable to hold off on all the other things happening right now.
Hurry up and take my money before it's gone!
Do you have the KMAC 2's in hand ready to ship?
Can we get an approximate date on when you will be selling/shipping these. I want to make sure I have enough money left over. However, if it is too long from now I may be unable to hold off on all the other things happening right now.
Hurry up and take my money before it's gone!
Is no one going to answer this?
Do you have the KMAC 2's in hand ready to ship?
Can we get an approximate date on when you will be selling/shipping these. I want to make sure I have enough money left over. However, if it is too long from now I may be unable to hold off on all the other things happening right now.
Hurry up and take my money before it's gone!
Is no one going to answer this?
Hey guys, what does assembly services entail? What would I still need to do to get the kb working after the assembly service?I'm pretty sure nothing. KMACs should come with a default firmware, if not, you'd need to load that.
How about lubing and stickers? I understand that will be a lot of work involved.
Yup, I heard that too. I meant maybe someone else can work on lubing and stickers for an additional cost. If not that is fine too, I don't want to ask too much =) Ummm. Kuhn Tang, Sherryton already mentioned that they have some issues to resolve first (paypal, possible more approximate details from kmac team etc.) and that the kmac 2 will come right after. Just wait a bit and I am sure sherryton will deliver the good news soon.How about lubing and stickers? I understand that will be a lot of work involved.
I don't believe he would do it, spoke to him a few days ago and he mentioned how tedious it is to do that.
I understand. Just a thought, if you were to provide switches/stabilizers/stickers/springs it would be good if you can offer an option to have those delivered first so that those can be worked on before having it sent to alaricljs.How about lubing and stickers? I understand that will be a lot of work involved.
Lubing and Stickering is very tedious work. I, personally, can handle all the modding (since I will have all the switches, spring, lube, and stickers with me), but I will charge a fee. I am unsure about the fee yet as I never timed myself, but I will do it again (for my own KMAC). I will time it, and I will base it off of that. The work is very tedious, so I recommend you to purchase the items yourself, mod the switches, then send it to alaricljs.
Do you have the KMAC 2's in hand ready to ship?
Can we get an approximate date on when you will be selling/shipping these. I want to make sure I have enough money left over. However, if it is too long from now I may be unable to hold off on all the other things happening right now.
Hurry up and take my money before it's gone!
Is no one going to answer this?
As I said, KMAC 2 were suppose to be ready by this month. Now, it will be ready when our business PayPal account is done being reviewed. Shipping will take place in approximately 3 months from the day it is purchased.
I understand. Just a thought, if you were to provide switches/stabilizers/stickers/springs it would be good if you can offer an option to have those delivered first so that those can be worked on before having it sent to alaricljs.How about lubing and stickers? I understand that will be a lot of work involved.
Lubing and Stickering is very tedious work. I, personally, can handle all the modding (since I will have all the switches, spring, lube, and stickers with me), but I will charge a fee. I am unsure about the fee yet as I never timed myself, but I will do it again (for my own KMAC). I will time it, and I will base it off of that. The work is very tedious, so I recommend you to purchase the items yourself, mod the switches, then send it to alaricljs.
Do you have the KMAC 2's in hand ready to ship?
Can we get an approximate date on when you will be selling/shipping these. I want to make sure I have enough money left over. However, if it is too long from now I may be unable to hold off on all the other things happening right now.
Hurry up and take my money before it's gone!
Is no one going to answer this?
As I said, KMAC 2 were suppose to be ready by this month. Now, it will be ready when our business PayPal account is done being reviewed. Shipping will take place in approximately 3 months from the day it is purchased.
Is that the same lead time for the 1.2?
Yes, everything will arrive at the same time and shipped altogether, so there will be no extra costs for shipping.
Anyone else building their KMAC 2's tonight?Only if you let me buy one. :p
I am going with 55g Clears (ergo-clears) with white stickers.
Anyone else building their KMAC 2's tonight?Show Image(http://i.imgur.com/EBdZ1Gc.jpg)
I am going with 55g Clears (ergo-clears) with white stickers.
Anyone else building their KMAC 2's tonight?Show Image(http://i.imgur.com/EBdZ1Gc.jpg)
I am going with 55g Clears (ergo-clears) with white stickers.
/me so jealous
That right arrow looks weird.
Haha, I'm doing 62g vintage blacks too! Actually I'd better get desoldering...
What caps are you going with?
What caps are you going with?
I have a nice set (http://geekhack.org/index.php?topic=32960.msg744311#msg744311) of Cherry beige with some textless legends that would work well, and I have a R4 coming from 7bit that would look nice some day. But for now, I've been aching to use my WYSE PCE keys. I do believe WYSE will look nice with the Ti, although the KMAC1 with the lighter shade might look better.
That beige set looks awesome.. Would really want those on my Cheat! My Wyse got lost in the mail though.. sigh.. :(
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
So how can I place my order ? I really would like to buy two :)
At this time, 1 per person. If there is any leftovers of another type of keyboard, then you will have to wait if you wanted it. For example: You ordered a KMAC 2, but you want both KMAC 2 and 1.2. You will have to wait a week if you are highly interested in getting both. That way, everyone has a chance at a custom aluminum keyboard.
okay great, and how can I make my order for the one pice and the waiting list for nr. 2 ?
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
So how can I place my order ? I really would like to buy two :)
At this time, 1 per person. If there is any leftovers of another type of keyboard, then you will have to wait if you wanted it. For example: You ordered a KMAC 2, but you want both KMAC 2 and 1.2. You will have to wait a week if you are highly interested in getting both. That way, everyone has a chance at a custom aluminum keyboard.
okay great, and how can I make my order for the one pice and the waiting list for nr. 2 ?
Sherry,
when will we be able to order these firm and pay you ?
Fabian
It will have 5 more than the KMAC 2, but I am not sure exactly how many KMAC 2's yet.
So how can I place my order ? I really would like to buy two :)
This is great! Looking forward to it and hopefully my new KMAC soon ....
At this time, 1 per person. If there is any leftovers of another type of keyboard, then you will have to wait if you wanted it. For example: You ordered a KMAC 2, but you want both KMAC 2 and 1.2. You will have to wait a week if you are highly interested in getting both. That way, everyone has a chance at a custom aluminum keyboard.
okay great, and how can I make my order for the one pice and the waiting list for nr. 2 ?
Sherry,
when will we be able to order these firm and pay you ?
Fabian
PayPal should be resolved tomorrow.
The KMAC leader raised his pricing by 10-15%.
The pricing (Prices for KMAC Pad are not set in stone) goes as below:
KMAC 2: $410
KMAC 2 (with 4s): $460
KMAC 1.2: $330
KMAC 1.2 (with 4s): $380
KMAC Pad: $205
KMAC Pad (with 4s): $215 or $220
The KMAC Pad should include a bar, but I am not 100% sure. I will push the KMAC team to include the bar. The bar is a full length bar, so you can attach the KMAC 1.2 (or KMAC / KMAC LE) to the KMAC Pad. The bar will also give both items an angle. They are like feet, but it attaches to the other to make it a full size keyboard if you are more comfortable with that.
I am sorry about the ridiculous prices for the Pad, and I recommend you avoid if the price tag is horrifying.
The 4S will include 110 switches, 100 springs, a set of stabilizers, and a set of stickers. So far I am able to provide the following switches: Blacks, Blues, Browns, Clears, or Reds.
Again, none of this is set in stone, but it is really close to the final product. I will have them listed as soon as my PayPal is done being reviewed. It should be reviewed tonight or tomorrow morning.
I wonder if originativeco will still be around in a few years time. Things are so tight right now it's hard justifying $500 on a kb ><
I wonder if originativeco will still be around in a few years time. Things are so tight right now it's hard justifying $500 on a kb ><
will the cherry stabilizers be modded? (cut the nubs to make it equal or better than costar stabilizers)
i see... because i was thinking if it is included in the soldering services, would be less hassle for the buyers...will the cherry stabilizers be modded? (cut the nubs to make it equal or better than costar stabilizers)
Depends, are you opting for soldering services? It is real easy to cut off the nub on your own.
All it takes is is one of these bad boys, http://www.digikey.com/product-search/en?mpart=170M&vendor=72 !
Don't worry , after spending $500 on a keyboard, you will start to have "placebo effect" on it and everything is justifiable like all other Realforce and HHKB owners.
Coming back to a general enquiry:
Would one have to be a member to be able to add products to the Paypal cart? Am new to the Originativeco site so unsure if one must have admin approval to actually buy stuff.
Hey sherry, for the 1.2 were you able to get some that had the standard winkeyless case or are the all the new block style?
I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
:/ Here's to hoping not! :PHey sherry, for the 1.2 were you able to get some that had the standard winkeyless case or are the all the new block style?
I believe it's all the new block style. That way people get to choose if they want 84 or 86.
So KMAC 1.2 with 4s+mod&soldering service+international shipping = something like $465?
Hmm... I'm abit confused here....I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
Hmm... I'm abit confused here....I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
At first I thought the 4s kits are for the keyboard assembling purposes (meaning to make a working keyboard), not for switch lubing + stickering such extra services... after what I've read from your reply, it seems that the 4s kits are for modding purposes, then I'm left wondering how to get a working keyboard done when the original KMAC 1.2 does not include the switches?
Let's say if just like what jinhan88 said, just buy and direct ship to alaric for assembling, then only send out to buyers?
Is it $330 + assembling service + shipping to buyer?
I may be dumb but what does 4s mean? lolswitches, springs, stickers and stabilizers.... read previous page's sherry's answer....
So KMAC 1.2 with 4s+mod&soldering service+international shipping = something like $465?
Yes, that is about right.
Hmm... I'm abit confused here....I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
At first I thought the 4s kits are for the keyboard assembling purposes (meaning to make a working keyboard), not for switch lubing + stickering such extra services... after what I've read from your reply, it seems that the 4s kits are for modding purposes, then I'm left wondering how to get a working keyboard done when the original KMAC 1.2 does not include the switches?
Let's say if just like what jinhan88 said, just buy and direct ship to alaric for assembling, then only send out to buyers?
Is it $330 + assembling service + shipping to buyer?
If you are just fine with stock switches, then that would be an additional $40 on top of the assembly service.
Hmm... I'm abit confused here....I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
At first I thought the 4s kits are for the keyboard assembling purposes (meaning to make a working keyboard), not for switch lubing + stickering such extra services... after what I've read from your reply, it seems that the 4s kits are for modding purposes, then I'm left wondering how to get a working keyboard done when the original KMAC 1.2 does not include the switches?
Let's say if just like what jinhan88 said, just buy and direct ship to alaric for assembling, then only send out to buyers?
Is it $330 + assembling service + shipping to buyer?
If you are just fine with stock switches, then that would be an additional $40 on top of the assembly service.
I see.... so is it safe for me to say that to get a working keyboard delivered would be
KMAC 1.2 ($330) + stock switches ($40) + assembling service from alaric (to be determined by alaric?)
Hmm... I'm abit confused here....I just wanted to make sure that people are aware that shipping prices are included into the prices.So meaning for example a KMAC 1.2 with 4s + shipping would be $380? if adding soldering service needs to add soldering price + second shipping?
Yes and no.
If you order the 4s, then that means you plan to do all the labor yourself. You will pay for the 4s to ship to your location, mod it, then ship it to alaric, and he will ship it back to you (at no additional charge).
At first I thought the 4s kits are for the keyboard assembling purposes (meaning to make a working keyboard), not for switch lubing + stickering such extra services... after what I've read from your reply, it seems that the 4s kits are for modding purposes, then I'm left wondering how to get a working keyboard done when the original KMAC 1.2 does not include the switches?
Let's say if just like what jinhan88 said, just buy and direct ship to alaric for assembling, then only send out to buyers?
Is it $330 + assembling service + shipping to buyer?
If you are just fine with stock switches, then that would be an additional $40 on top of the assembly service.
I see.... so is it safe for me to say that to get a working keyboard delivered would be
KMAC 1.2 ($330) + stock switches ($40) + assembling service from alaric (to be determined by alaric?)
+ shipping :)
So let's get this straight. KMAC 2 + International shipping would be a total of US $410. It's tempting.
So the 87 key layout is definitely a no-go this time around?
Any update on the sale?
WFD's KMAC2's look like 87 layout
Are you sure? I can provide anything that is available out there. I tried asking the KMAC team about the specifications on the KMAC 2 yesterday, but they were too busy. I am still not 100% sure. I believe when I ordered samples awhile ago though, they asked me, "Do you want winkey or winkeyless?". I am pretty sure the KMAC 1.2 can be available in both, but I am still unsure about the KMAC 2.
The new KMAC with those blocks is a very versatile product, however the project leader should consider the idea to redesign the PCB in order to support both 86 & 87 layouts from a single PCB .WFD's KMAC2's look like 87 layout
Are you sure? I can provide anything that is available out there. I tried asking the KMAC team about the specifications on the KMAC 2 yesterday, but they were too busy. I am still not 100% sure. I believe when I ordered samples awhile ago though, they asked me, "Do you want winkey or winkeyless?". I am pretty sure the KMAC 1.2 can be available in both, but I am still unsure about the KMAC 2.
87 key layout does exist, I have 3 on hand to assemble. You just need the PCB that supports it, otherwise the cases and accessories are exactly the same. It even comes with the separate winkeyless blocks, which doesn't even make sense for a 87 key layout (the blocks are grey btw, not gold like in the pictures). It's just a shame they didn't design it similar to Phantom, where users can choose between winkey and winkeyless from only 1 PCB design.
I just read the thread and wanted to comment on something. All custom mods (lube, sticker, stabilizers) has to be done BEFORE everything is assembled. So you can't really just say clip the cherry stabilizers yourself after you get the assembled kmac. Once the switches are soldered on, there's no way to take out the stabilizers unless you desolder everything again. Same goes with lubing or stickers.
If someone is willing to pay this much for a keyboard, a tad extra for lubing would be a good idea. It makes the keyboard feel so much better. The irony is that someone wants to pay for assembly because they either don't have equipment, don't know how to, or don't have time. But if they have to do mods after it's assembled, then it would have to be completely taken apart again and reassembled, in which case they should have just invested in equipment to build it in the first place. Too bad the kmacs are not like LZ boards where you can have it assembled and still be able to mod it afterwards. Such a simple modification of the plate design could have allowed this.
I just read the thread and wanted to comment on something. All custom mods (lube, sticker, stabilizers) has to be done BEFORE everything is assembled. So you can't really just say clip the cherry stabilizers yourself after you get the assembled kmac. Once the switches are soldered on, there's no way to take out the stabilizers unless you desolder everything again. Same goes with lubing or stickers.WFD, this applies to both KMAC2 and KMAC1.2? If it is so... then it looks like it's quite a bummer.... >.<
If someone is willing to pay this much for a keyboard, a tad extra for lubing would be a good idea. It makes the keyboard feel so much better. The irony is that someone wants to pay for assembly because they either don't have equipment, don't know how to, or don't have time. But if they have to do mods after it's assembled, then it would have to be completely taken apart again and reassembled, in which case they should have just invested in equipment to build it in the first place. Too bad the kmacs are not like LZ boards where you can have it assembled and still be able to mod it afterwards. Such a simple modification of the plate design could have allowed this.
WFD, this applies to both KMAC2 and KMAC1.2? If it is so... then it looks like it's quite a bummer.... >.<
When these go on sale will they be sent out or do they still have to go out and be made and such?There is a approximate lead time of three months from the date of purchase before the boards will be shipped out. At least that's what sherry said before. This may have changed since he's hit a few speed bumps with PayPal etc.. Not sure what the status is on his inventory of the product. Three months is normal for these types of sales. LZ-GH is the same way.
LZGH is made by the order, I don't think it's the same with KMAC2. I think Sherry is getting a limited amount and selling it through his store for people that didn't have access to the Korean group buy. The only wait you have is shipping, LZGH is in production.
Well mine was ordered around late October or early November of last year iirc, and I just now got it. Unless sherryton put in the order around that time too, I don't think he has the 50 on him. He said he only maybe a few sample kmac2's.
i will be ordering kmac2 titanium
kmac 1.2 silver
pad silver
Answer yo PM"s, Sherry
I see, that would be good just in case people can't get into the kmac 2 =)
Wowow! That's great to hear. I thought I would never be able to get one of these =DI see, that would be good just in case people can't get into the kmac 2 =)
That is not exactly the case. I will allow people to order KMAC 2 as well, but they will have to wait approximately 3 months. The ones that order soon will get it in 2-3 weeks.
So could I make the list for this "round" of kmac 2s?
Has there been much discussion on the Korean forums about the KMAC 2 having a slightly different anodized coloring on the top shell vs the base?
Has there been much discussion on the Korean forums about the KMAC 2 having a slightly different anodized coloring on the top shell vs the base?
Have it also been confirmed whether all the 1.2s are using blocks or milled cases?Has there been much discussion on the Korean forums about the KMAC 2 having a slightly different anodized coloring on the top shell vs the base?
I have not seen any discussion about this yet. I will ask them.
get ready tomorrow :)=D any time in particular?
get ready tomorrow :)
Sheesh, all these questions!
want it. see it. buy it.
easy as that.
how is the 4s going to happen?
What isn't included in this price?Easier to say what is:
What isn't included in this price?Easier to say what is:
Case, plate, PCB.
What isn't included in this price?
Where can I get switches for a price lower than 1$/each? I'm mostly thinking about reds or clears
I saw that thead of vintage blacks but it is already sold out. I would just wait and see sherryton about that 4s package. That is a pretty good deal.Where can I get switches for a price lower than 1$/each? I'm mostly thinking about reds or clears
Clears no idea unless you buy a used board. Reds and blacks have the same stems. You can search the classifieds...I know there is one guy who is selling a ton of blacks and vintage black switches ($0.20 and $0.35 each).
Arranging that with alaric tonight :)I already ordered a kmac, would I be able to add the 4s in that order? =D
Arranging that with alaric tonight :)
Arranging that with alaric tonight :)
Arranging that with alaric tonight :)
u wanna sell single 4s without KMAC2 order?
Has anyone been able to order anything from Sherry's website? I get stuff in my box, then go to check out and it won't let me passed the credit card info page.
For those of you looking to pay through PayPal, Amazon, or Google because of our technical problem, then please send me an e-mail at sheraton@originativeco.com. I'll be glad to personally assist you.
Just to get this straight. Original kmac and kmac 1.2 have same case design (1.2 has blockers and harder anodization), while kmac 2 has completely new case design. Is it something like that?
Are there any significant improvements between the old design and the design of the KMAC 2?Just to get this straight. Original kmac and kmac 1.2 have same case design (1.2 has blockers and harder anodization), while kmac 2 has completely new case design. Is it something like that?
Pretty much
I would hold on before making any purchase. I paid for one over 4 weeks ago and haven't gotten a reply about it or updates on what is going on. Now I have spent 400 bucks and not even sure what happened to it. I have messaged sherryton on originative, geekhack several times and still no reply.
4 weeks no reply? 0,0
I don't mind waiting for it to be manufactured but I remember it mentioned it that there was a few kmacs in stock and that it would arrive 2-3 weeks after order. Currently the order has no updates and it is still pending. If there was just a reply that it will take longer for it to arrive or that there was some issues that need to be resolved, then I would be satisfied as I can understand that. But to place an order and send an e-mail/message every week with no reply is not right. I have seen replies to other people who made orders on keycap sets etc. If the kmacs aren't going to be produced or in stock then just take it down and refund the people who have made an order.I would hold on before making any purchase. I paid for one over 4 weeks ago and haven't gotten a reply about it or updates on what is going on. Now I have spent 400 bucks and not even sure what happened to it. I have messaged sherryton on originative, geekhack several times and still no reply.
He has run away from the problem, hoping it would go away.
4 weeks no reply? 0,0This coming Wednesday would make it 5 weeks now. I sent an e-mail out every week on originative site and geekhack for the first 3 weeks. Now I have given up and hope that there is some reply sometime soon.
This has been asked numerous times..... Look around GH.I've already had a look around, and I am aware of the differences in anodising, case slant etc. what I can't find any information on is the plate mounting. I know that the kmac 2 has rectangular areas for the screws which stick out from the plate whereas the kmac 1 and 1.2 have circular areas.. Does this yield any benefits? I should have been moe specific, sorry.
The plates with two holes per lip is most likely better. But I don't expect anyone to experience any differences between them...lol did you?Unfortunately I've never used any kmac. I was just curious.
Kmac 1 and kmac 1.2 use old case with feet while kmac 2 has new design without feet (it has slope)Are there any significant improvements between the old design and the design of the KMAC 2?Just to get this straight. Original kmac and kmac 1.2 have same case design (1.2 has blockers and harder anodization), while kmac 2 has completely new case design. Is it something like that?
Pretty much
4 weeks no reply? 0,0This coming Wednesday would make it 5 weeks now. I sent an e-mail out every week on originative site and geekhack for the first 3 weeks. Now I have given up and hope that there is some reply sometime soon.
Damn, this is rough.
If I will have enough money, I'm defo getting kmac 1.2. But I'm not sure if I should get LZ-GH or kmac 1.2...
Dear [OJs name],
I am highly sorry. I can cancel it to make it flat-rate (This was related to my order for something different). The initial problem is because we are awaiting shipments from South Korea to finish packaging it.
Regards
This is what he literally sent me:QuoteDear [OJs name],
I am highly sorry. I can cancel it to make it flat-rate (This was related to my order for something different). The initial problem is because we are awaiting shipments from South Korea to finish packaging it.
Regards
I redacted my name and added the parentheses. I believe this email pertains to the KMAC2. I cannot prove this of course, but it would seem like a real possibility.
Cheers,
There's someone selling a lz-gh in classifields ( I don't know how to spell this D:).If I will have enough money, I'm defo getting kmac 1.2. But I'm not sure if I should get LZ-GH or kmac 1.2...
Let me put your choice to rest. You can't get an LZ-GH as they're sold out. Maybe you'll see one in the classifieds, but that still won't be for a while.
The LZGH is still in production, so if you do see one in classified they're selling their order. No one has the physical keyboard yet.
It's shipping to alaric's house right now from South Korea. I believe it arrives on Thursday. If you like soldering services, then it will take about 2-3 more days. If not, then he can ship it right away.
Regards
Sheraton
Anyone here received their KMAC 2 from sherryton? Last e-mail I got from him was on April 02, 2013 and he said that the KMAC 2s were on their way to alaric's house. Basically, this is what I got from the e-mailQuoteIt's shipping to alaric's house right now from South Korea. I believe it arrives on Thursday. If you like soldering services, then it will take about 2-3 more days. If not, then he can ship it right away.
Regards
Sheraton
Anyone here care to share some info? I just want my stuffs I paid for.
Anyone here received their KMAC 2 from sherryton? Last e-mail I got from him was on April 02, 2013 and he said that the KMAC 2s were on their way to alaric's house. Basically, this is what I got from the e-mailQuoteIt's shipping to alaric's house right now from South Korea. I believe it arrives on Thursday. If you like soldering services, then it will take about 2-3 more days. If not, then he can ship it right away.
Regards
Sheraton
Anyone here care to share some info? I just want my stuffs I paid for.
The Sanctuary set GB fellas has been waiting for our keycaps since the end of March.
I've sent him multiple messages on FB, Twitter, emails and PM's and still haven't heard back.
Anyone here received their KMAC 2 from sherryton? Last e-mail I got from him was on April 02, 2013 and he said that the KMAC 2s were on their way to alaric's house. Basically, this is what I got from the e-mailQuoteIt's shipping to alaric's house right now from South Korea. I believe it arrives on Thursday. If you like soldering services, then it will take about 2-3 more days. If not, then he can ship it right away.
Regards
Sheraton
Anyone here care to share some info? I just want my stuffs I paid for.
The Sanctuary set GB fellas has been waiting for our keycaps since the end of March.
I've sent him multiple messages on FB, Twitter, emails and PM's and still haven't heard back.
Well he received the keys right before Christmas actually, so we've been waiting since then.
Anyone here received their KMAC 2 from sherryton? Last e-mail I got from him was on April 02, 2013 and he said that the KMAC 2s were on their way to alaric's house. Basically, this is what I got from the e-mailQuoteIt's shipping to alaric's house right now from South Korea. I believe it arrives on Thursday. If you like soldering services, then it will take about 2-3 more days. If not, then he can ship it right away.
Regards
Sheraton
Anyone here care to share some info? I just want my stuffs I paid for.
The Sanctuary set GB fellas has been waiting for our keycaps since the end of March.
I've sent him multiple messages on FB, Twitter, emails and PM's and still haven't heard back.
Well he received the keys right before Christmas actually, so we've been waiting since then.
Wow... that's ****ing ridiculous.
Sherryton, how much do you charge for a KMAC-2 with 4s & keycaps?
Sorry for the bump, but are the blox now the same color as the case?
1.2 KMAC... I don't know if this also comes in an unanodized version... would be great if it did. If not the Titanium totally works.
Also... does anybody know if the top deck and plate are interchangeable between the 1.2 and the 2?
Cheers,
K