Author Topic: Price Check- What's it Worth?  (Read 2359332 times)

0 Members and 3 Guests are viewing this topic.

Offline ksc

  • Trade Count: (0)
  • Posts: 11
Re: Price Check- What's it Worth?
« Reply #8600 on: Mon, 29 July 2019, 17:20:02 »
I have SA Abyss and SA Honeywell both new. How much would they sell for? Thanks!

Offline EMC Labs

  • Trade Count: (0)
  • Posts: 447
Re: Price Check- What's it Worth?
« Reply #8601 on: Wed, 31 July 2019, 07:34:15 »
Hi, was wondering how much this goes for:

Japanese PBT Dye-subbed Apple Extended Keyboard II (M3501) keycaps for 60% including stabs.

Thanks in advance!

Offline liangalv

  • Trade Count: (0)
  • Posts: 35
Re: Price Check- What's it Worth?
« Reply #8602 on: Fri, 02 August 2019, 04:11:50 »
How much are Keycult no.2 rev 1s expected to go for?

Offline xiec1

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8603 on: Sat, 03 August 2019, 05:43:15 »
I have a LZ CLS TKL(GRAY) want to sell. How much are this item worth?

Offline chrysos349

  • Trade Count: (0)
  • Posts: 0
Re: Price Check- What's it Worth?
« Reply #8604 on: Mon, 05 August 2019, 09:57:24 »
(New) GMK Laser - Cyberdeck (base kit) + Mitowaves. How much?

Offline Stvnce

  • Trade Count: (0)
  • Posts: 5
Re: Price Check- What's it Worth?
« Reply #8605 on: Sat, 10 August 2019, 19:25:03 »
Price check on a MAO White Canoe? Red plate and weight.

Offline missylo

  • Trade Count: (0)
  • Posts: 57
Re: Price Check- What's it Worth?
« Reply #8606 on: Mon, 19 August 2019, 10:00:06 »
Hoping that someone can give me some insight on these two keycap sets. Haven't seen them for a while on r/mm, and am turning to Geekhack for some help:

SP SA Nantucket Selectric R1: TKL base + homing pack + Specialty add on + Cape Cod add on + Amity Island add on. Additional/Separately purchased keys: The ortho blanks and red spacebar were ordered separately from SP to match the kit. Set also includes a Clueboard esc novelty. Bought these for $400usd. I can consider selling it without the ortho blanks for cheaper (not sure that will make a difference though).
Keycap set is new, never used. link: https://imgur.com/LRg48Ku


SP SA Troubled Minds R1: Base (Alphas + mods) + Non-Standard + Eva01/Joker Kit + Alternative Color + Planck/Atomic + Numpad
Bought these for $285 on r/mm just before R2 came out. Don't know if these are worth anything anymore! The alphas have shine. Link: https://imgur.com/G5DCl44

Thanks in advance

Offline PancakeMSTR

  • Trade Count: (0)
  • Posts: 491
Re: Price Check- What's it Worth?
« Reply #8607 on: Fri, 23 August 2019, 08:52:02 »
Old Logo Dell branded Model M

Let's assume with replacement keycaps. I'm just not quite sure how sought after that logo is on a model M.
   

Offline h.parks

  • Trade Count: (0)
  • Posts: 36
  • Location: Tulsa, OK
Re: Price Check- What's it Worth?
« Reply #8608 on: Tue, 17 September 2019, 15:44:42 »
SA Penumbra fix kit. Hoping to buy one but not sure what it would be worth today.
Bottom-Mount Alps Dactyl | Ergodox | PLA75 | SA Penumbra | DSA Blanks | GMK First Love

Offline LightningXI

  • * Elevated Elder
  • Trade Count: (4)
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Price Check- What's it Worth?
« Reply #8609 on: Tue, 17 September 2019, 15:59:00 »
SA Penumbra fix kit. Hoping to buy one but not sure what it would be worth today.

Should cost you around what it cost during the buy -- like $65-75

Offline directheatedtriode

  • Trade Count: (0)
  • Posts: 393
Re: Price Check- What's it Worth?
« Reply #8610 on: Fri, 27 September 2019, 15:25:47 »
Any ideas on value of a Filco Zero with clone Alps switches?

Offline fohat.digs

  • * Elevated Elder
  • Trade Count: (1)
  • Posts: 6462
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: Price Check- What's it Worth?
« Reply #8611 on: Sat, 28 September 2019, 17:10:11 »
I bought one in the low-$100 range several years ago and transplanted orange Alps into it.

They are not easy to find, if you want one you might consider paying up to $200, maybe more.

Just a guess.
State Freedom Caucus News 2024
Missouri state Senator Nick Schroer sponsors a bill that would allow senators to duel one another — in the Senate chambers! – legally.

Offline Rob27shred

  • Trade Count: (0)
  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: Price Check- What's it Worth?
« Reply #8612 on: Sat, 28 September 2019, 18:06:54 »
Price check on a SGI Granite board in very good shape. A few small scuffs on the bottom of the case, but no yellowing or other defects. The caps are in pristine shape, no yellowing, shine, or marks. The switches are in great shape also, very clean & smooth. No rust on the plate & basically no debris were on the inside of the case when I had it open to check. I believe this board had very little if any use TBH, the scuffs on the bottom case I suspect were from poor storage. I do not have the cord or mouse that goes along with the board. Not planning on selling this board, I just got it for a really good deal & want a better ideal of it's market value. Thanks in advance for any info on it! :thumb:

Bump?

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8613 on: Sat, 05 October 2019, 08:24:19 »
I have a CM Masterkeys Pro S with MX Browns and Varmilo PBT Dye-sub dark grey caps on it. The board is in great shape and has all the original accessories and keycaps, and I have the numpad keycaps from the Varmillo set. How much could I sell it for?

Offline Steezus

  • Keeper of Facts
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 2497
Re: Price Check- What's it Worth?
« Reply #8614 on: Mon, 07 October 2019, 09:49:59 »
It appears while taking my hiatus the prices of second-hand customs have skyrocketed. Looking for a fair price range on Kingsavers. I've seen recent ones on /r/mechmarket go for 700-1200. To me, anything past 750 is a bit ridiculous as I have never even spent more than 1000 on an OTD board a couple years ago.
TGR-Jane CE | TGR-Tris CE | Lyn Montage | LZ PhysiX | Exclusive e8.5

Offline Signature

  • master of puppers
  • * Moderator
  • Trade Count: (2)
  • Posts: 1914
  • Location: Sweden
  • snoozing
Re: Price Check- What's it Worth?
« Reply #8615 on: Mon, 07 October 2019, 09:58:41 »
It appears while taking my hiatus the prices of second-hand customs have skyrocketed. Looking for a fair price range on Kingsavers. I've seen recent ones on /r/mechmarket go for 700-1200. To me, anything past 750 is a bit ridiculous as I have never even spent more than 1000 on an OTD board a couple years ago.
I'd say they are around 800-1000$ but they aren't very frequent out in the open so prices are kinda hard to estimate
Very busy with studies atm.

Offline Steezus

  • Keeper of Facts
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 2497
Re: Price Check- What's it Worth?
« Reply #8616 on: Mon, 07 October 2019, 10:11:43 »
It appears while taking my hiatus the prices of second-hand customs have skyrocketed. Looking for a fair price range on Kingsavers. I've seen recent ones on /r/mechmarket go for 700-1200. To me, anything past 750 is a bit ridiculous as I have never even spent more than 1000 on an OTD board a couple years ago.
I'd say they are around 800-1000$ but they aren't very frequent out in the open so prices are kinda hard to estimate

Thanks for the help. I've lost all desire to accumulate a collection of keyboards as I typically always settle typing on one board for an extended period of time. For the longest time, I've just wanted to experience a well-built alps board. I'm a bit hesitant to invest that much on a board that I do not know whether or not I will enjoy it. I have too many expensive hobbies.
TGR-Jane CE | TGR-Tris CE | Lyn Montage | LZ PhysiX | Exclusive e8.5

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8617 on: Tue, 15 October 2019, 18:49:07 »
Got super lucky (hopefully) and found a '94 and 2000 Model M for $20 for both (well, $40 after shipping...). They have all the keys, cables (phone-style plug, can't remember what it's called), and besides being dirty and slightly yellowed and one having some relatively minor case damage, they appear to be in good shape.


Assuming I cleaned them up and they work fine (they should, according to the seller anyway), how much could I get for them? I'm in Canada (though the prices I said earlier were in USD, since I bought them from US Ebay). Hell, would someone on here be willing to trade me for...something? Thanks!

Offline ContaxS2

  • Trade Count: (0)
  • Posts: 14
  • Location: North Carolina
Re: Price Check- What's it Worth?
« Reply #8618 on: Wed, 16 October 2019, 13:29:06 »
Price check for GMK BENTO base unopened

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Trade Count: (5)
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: Price Check- What's it Worth?
« Reply #8619 on: Thu, 17 October 2019, 00:38:56 »
Price check for GMK BENTO base unopened

It's whatever you want it to be, my pimp


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8620 on: Sun, 20 October 2019, 20:22:05 »
NCR 4950 with white tactile space invaders. Appears to be in good cosmetic shape and fully working. If I cleaned it up, how much would it be worth?

Offline Grimfire

  • Trade Count: (0)
  • Posts: 9
  • Location: Dallas, TX
Re: Price Check- What's it Worth?
« Reply #8621 on: Wed, 23 October 2019, 22:33:40 »
price check on a few artisans

orochi drezzed

shishi ectoplasm

fugthulu nutrient slurry

fugu Dream Tongue

Offline Quasimodo

  • Trade Count: (0)
  • Posts: 15
  • Location: UK
Re: Price Check- What's it Worth?
« Reply #8622 on: Fri, 25 October 2019, 18:19:02 »
Just looking for a price check on a Wildstory Caps Lola Scorned? Any ideas would be very helpful.  :thumb:

Offline Kashing

  • Trade Count: (0)
  • Posts: 0
Re: Price Check- What's it Worth?
« Reply #8623 on: Wed, 06 November 2019, 12:31:09 »
Hey all, tried r/MechMarket but got no response, thought I would try here. I would like to build my own 60% and I have three model m's laying around that I cleaned up and thought of selling them to use the money on a new build. It seems as though the prices vary on these boards a lot, so I thought I would try and get a value on mine.
   
  • Cube - 5/25/95
  • IBM - 3/11/96
  • Dell - 10/16/92

https://imgur.com/a/jev2R92

I find the Cube interesting because it has a date of 95, but still uses an AT connector (I have the adapter to PS2)

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1500
  • Location: Port Wentworth, GA
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: Price Check- What's it Worth?
« Reply #8624 on: Fri, 08 November 2019, 14:52:35 »
Hey all, tried r/MechMarket but got no response, thought I would try here. I would like to build my own 60% and I have three model m's laying around that I cleaned up and thought of selling them to use the money on a new build. It seems as though the prices vary on these boards a lot, so I thought I would try and get a value on mine.
   
  • Cube - 5/25/95
  • IBM - 3/11/96
  • Dell - 10/16/92

https://imgur.com/a/jev2R92

I find the Cube interesting because it has a date of 95, but still uses an AT connector (I have the adapter to PS2)

Honestly Deskthority might be a better resource on Vintage pricing.

Offline Maverick-1978

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8625 on: Sat, 09 November 2019, 21:05:50 »
Hey folks,

Looking for a price check.

I've two NOS IBM SSK's, both sealed, though I opened one for pictures today

Both are in the original IBM boxes, and are from a local electronics warehouse raid a few years ago.

From shipping label on box:
Ship No:  1397680
ID No:  5052768
Date:  Mar 03, 1993

From the one that I opened, it doesn't appear that a PS/2 cable was included.

Part No:  1397681
Fru:  1397685
ID No:  5052768
Date:  3-3-93
Pl T No:  F7
Model M

Made in USA (obviously) :)

I've another few dozen Model M's to refurb, but only a small handful of cables, and no desire to purchase more, nor to supply Soarer's cables.

What would be a reasonable price/max price here with shipping and cable NOT included? I can provide pix if that is needed

Note that one the one I opened has not and will not be tested. It is new/opened only for pictures and will remain so. Also full disclosure - there was a single plastic rivet that was inside the keyboard. While that shouldn't surprise anyone here, I just wanted to be up front. I've no plans on opening that new keyboard unless the consensus is that it would help to better sell.
. Thanks for your time!
« Last Edit: Tue, 12 November 2019, 10:40:02 by iamtootallforthis »

Offline dragon564738

  • Trade Count: (0)
  • Posts: 7
Re: Price Check- What's it Worth?
« Reply #8626 on: Mon, 18 November 2019, 14:12:32 »
Keycult No.2 Rev.1 (Brass)

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Trade Count: (5)
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: Price Check- What's it Worth?
« Reply #8627 on: Wed, 27 November 2019, 19:31:02 »
Keycult No.2 Rev.1 (Brass)

Any dents?

How's the ano?

Is it NIB?

Might need a lot more info.


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline -Space-NATO-

  • Trade Count: (0)
  • Posts: 14
  • Location: Outer Space
  • Love Cats and old keyboards.
Re: Price Check- What's it Worth?
« Reply #8628 on: Tue, 03 December 2019, 11:23:11 »
Hello guys i have this beauty https://imgur.com/gallery/3HskMLC

NIB condition with new cable, transparent keycaps, keycap puller and instructions, not sure how much is worth.


  IBM Model F XT        IBM Model M          IBM Model M122     Leopold FC980M


Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8629 on: Thu, 05 December 2019, 08:10:17 »
Hello guys i have this beauty https://imgur.com/gallery/3HskMLC

NIB condition with new cable, transparent keycaps, keycap puller and instructions, not sure how much is worth.

Not sure on the price, but man is it a beauty! Nice find!

Offline june213

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8630 on: Thu, 19 December 2019, 18:39:18 »
How much are satisfaction 75 keyboards?
i was browsing through the keyboard forums because i'm looking to purchase a custom mechanical keyboard and i came across this beauty.
i think i saw one on mechmarket sell for 750 but wanted to see what others thought the price was?
and how rare are they? i would love to purchase one but they seem pretty rare to come across

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Trade Count: (1)
  • Posts: 7487
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Re: Price Check- What's it Worth?
« Reply #8631 on: Thu, 19 December 2019, 21:30:10 »
sa troubled minds r1 base kit (mods and alphas for ansi TKL no tsangan)

used like, once or twice cuz **** sa
I love Elzy

Offline june213

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8632 on: Thu, 26 December 2019, 19:25:10 »
Hey guys
need a price check on 3 keyboards

Think6.5
e6.5
satisfaction75

Offline LightningXI

  • * Elevated Elder
  • Trade Count: (4)
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Price Check- What's it Worth?
« Reply #8633 on: Thu, 26 December 2019, 21:27:48 »
Hey guys
need a price check on 3 keyboards

Think6.5
e6.5
satisfaction75

Seems think6.5 and E6.5 are going for around $500.

Offline june213

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8634 on: Sun, 29 December 2019, 00:25:25 »
need a price check on these switches-

Massdrop x Invyr Holy Panda Mechanical Switches

i know they retailed for about $1.28 a piece but wanted to know if they dropped or raised in value
also how much do they go for used?

Offline LightningXI

  • * Elevated Elder
  • Trade Count: (4)
  • Posts: 4280
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Price Check- What's it Worth?
« Reply #8635 on: Sun, 29 December 2019, 00:27:35 »
need a price check on these switches-

Massdrop x Invyr Holy Panda Mechanical Switches

i know they retailed for about $1.28 a piece but wanted to know if they dropped or raised in value
also how much do they go for used?
About the same as retail, if not lower.

Offline yuppie

  • Trade Count: (1)
  • Posts: 358
Re: Price Check- What's it Worth?
« Reply #8636 on: Fri, 03 January 2020, 13:32:51 »
All of these caps are topre stem. I know some are rare, I'm just unsure how rare at this point.

"Overall, it's a good community..  wish you well on your Pokemon Journey.." - TP4
Current Trades -- Wishlist

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8637 on: Fri, 03 January 2020, 20:05:49 »
Assuming I restore it to near perfect shape and it works well, how much is a Zenith Z150 AT worth?

Offline jacethesaltsculptor

  • Trade Count: (0)
  • Posts: 305
  • Location: Arizona - USA
  • IBM = I Buy Model-M's
Re: Price Check- What's it Worth?
« Reply #8638 on: Sat, 04 January 2020, 11:51:29 »
What is an IBM Model M in Industrial Gray worth?

What about if it's in a box? not the original but in a Model M box?

Unicomp M122 - Unicomp Classic Trackball - IBM Model M13 - IBM Model F122 - IBM Model F Bigfoot - IBM Model F AT - Ducky Shine 3 Yellow

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8639 on: Sat, 04 January 2020, 13:33:45 »
What is an IBM Model M in Industrial Gray worth?

What about if it's in a box? not the original but in a Model M box?
I'd personally say box is irrelevant if it's not the original box or not in good shape (or the keyboard isn't new/barely used), but the board is worth quite a bit. I'd say at least $400 but that might be too low or possibly too high, idk.

Offline jacethesaltsculptor

  • Trade Count: (0)
  • Posts: 305
  • Location: Arizona - USA
  • IBM = I Buy Model-M's
Re: Price Check- What's it Worth?
« Reply #8640 on: Sat, 04 January 2020, 14:07:16 »
What is an IBM Model M in Industrial Gray worth?

What about if it's in a box? not the original but in a Model M box?
I'd personally say box is irrelevant if it's not the original box or not in good shape (or the keyboard isn't new/barely used), but the board is worth quite a bit. I'd say at least $400 but that might be too low or possibly too high, idk.

alrighty, I was feeling around that myself, thank you.

Unicomp M122 - Unicomp Classic Trackball - IBM Model M13 - IBM Model F122 - IBM Model F Bigfoot - IBM Model F AT - Ducky Shine 3 Yellow

Offline fohat.digs

  • * Elevated Elder
  • Trade Count: (1)
  • Posts: 6462
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: Price Check- What's it Worth?
« Reply #8641 on: Sun, 05 January 2020, 08:29:40 »

I'd say at least $400 but that might be too low or possibly too high, idk.


That seems way high unless it is an early one and/or in pristine condition.

Remember that Unicomp is still selling replacement cases:

https://www.pckeyboard.com/page/product/1394942
State Freedom Caucus News 2024
Missouri state Senator Nick Schroer sponsors a bill that would allow senators to duel one another — in the Senate chambers! – legally.

Offline jacethesaltsculptor

  • Trade Count: (0)
  • Posts: 305
  • Location: Arizona - USA
  • IBM = I Buy Model-M's
Re: Price Check- What's it Worth?
« Reply #8642 on: Sun, 05 January 2020, 08:49:42 »
That was another concern I had, if it was a replacement case model, or not.

I think with my research yesterday and my responses here, I'll be giving it a pass. One day though I'll have an Industrial M. That'd be neat.

appreciate you guys, Fohat, and Kelvin.

Unicomp M122 - Unicomp Classic Trackball - IBM Model M13 - IBM Model F122 - IBM Model F Bigfoot - IBM Model F AT - Ducky Shine 3 Yellow

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8643 on: Sun, 05 January 2020, 10:03:36 »

I'd say at least $400 but that might be too low or possibly too high, idk.


That seems way high unless it is an early one and/or in pristine condition.

Remember that Unicomp is still selling replacement cases:

https://www.pckeyboard.com/page/product/1394942

Good point. I assumed it was an early IBM one and in good shape. If that was the case I think it would be worth $400 but I still might be wrong lol

Offline Zach_ariah

  • Trade Count: (0)
  • Posts: 2
Re: Price Check- What's it Worth?
« Reply #8644 on: Mon, 06 January 2020, 02:25:37 »
What’s a m65-A going for without the PCB? I saw a slightly used one but didn’t know what to pay

Offline Dellinav

  • Trade Count: (0)
  • Posts: 29
Re: Price Check- What's it Worth?
« Reply #8645 on: Sat, 11 January 2020, 00:01:16 »
How much would an Matrix Lab Abel-X kit be worth? I see the earlier Abel versions go for around 300-400, so I'm wondering if that's what I'm expected to pay for an Abel-X? 

Offline yhs

  • Trade Count: (0)
  • Posts: 103
Re: Price Check- What's it Worth?
« Reply #8646 on: Tue, 14 January 2020, 07:07:04 »
I’ve got a “stock” and barely used input club K-type from Massdrop. It’s fitted with the supplied Halo Clears. What could I get for it?

I also have a brand new and unused Realforce 87U TKL Keyboard I’m looking to sale but unsure what it’s worth.

I’m in Denmark and paid EU VAT. Assuming it’s worth “more” to a European buyer in this case?
« Last Edit: Tue, 14 January 2020, 16:21:16 by yhs »

Offline nicodelacruz

  • Trade Count: (0)
  • Posts: 4
Re: Price Check- What's it Worth?
« Reply #8647 on: Tue, 14 January 2020, 22:52:13 »
Trinity Corian keyboard. Icy Mint version. No. 3/15

Worth how much?

Offline kelvinhall05

  • Trade Count: (0)
  • Posts: 69
  • Location: London, Ontario
    • LinusTechTips
Re: Price Check- What's it Worth?
« Reply #8648 on: Wed, 15 January 2020, 06:31:30 »
Zenith Z150 AT in 9/10 shape and switches in 7/10 shape for a Leading Edge DC-2014 that's dirty but apparently switches are in good shape. Good deal?

Offline gorauskas

  • Trade Count: (0)
  • Posts: 90
  • Location: NV
Re: Price Check- What's it Worth?
« Reply #8649 on: Fri, 17 January 2020, 17:55:12 »
IBM Model M; Part #1390131; Serial #1084249; Date 05-Sep-86

What's a fair price for it in excellent condition?
« Last Edit: Fri, 17 January 2020, 18:05:13 by gorauskas »