[IC] TENET 70% Keyboard Kit with OLED Screen | GB coming up on 06/20

[ClickClack.io]

Metakey TENET Groupbuy Post Live



 
TENET(70%)
Designed by oy2r of Metakey

Index
 
- Prologue
- External Design
- Internal Design
- Transformable Layout
- PCB Software and OLED Interface
- Colorways
- Specification
- Product Photos
- Credits
- Q&A
- IC Forms & Discord Groups
 
Prologue
 

 
Looking back at the project, it has been over a year since we started it. How do we give the design a sharp and defined personality? What would make a keyboard "unique"? To what extent can we consider a design as complete? Time and again, we've hit a wall and climbed over it, and with that inertia, we have pushed hard past the narrow doors to seek our answers.
 
 
External Design
 

▲ 0.5u Bezel Size: 0.5u (9.525mm, 3/8") bezel is half of the keycap width. Provides a very good balance between the bezel and key area. The front look of the bezels is not too thin, which allows the color of the case to complement the keycaps and reduces how thick the keyboard appears, eliminating a sense of "heaviness". In practice, the bezel isn't so wide as to affect the typing experience, and there is no change of the edge touching the palm of your hand while you are typing on it.
 

▲ 18mm front height: The thinner chin makes the keyboard not only aesthetically cleaner, but also makes extended typing experiences more comfortable.
 

▲ Full Symmetrical Weight Design: The mounting of the bottom weight to the lower case has been designed to be horizontally symmetrical. This allows the keyboard to be built in both regular and southpaw layouts.
 

▲ Large brass weights: Optimizes the typing feel and sound as well as enhancing the overall atmosphere of the board. The brass surface on the main bottom weight is sandblasted and coated to maximize the brass's sandblasted texture as well as prevent oxidation. The other bottom weight with the USB port outlet is sandblasted and plated with 24K gold, two processes that together create a unique and beautiful texture.
 

▲ Centered USB-C port Design: The centered USB-C port design allows the ability to let users swap to their desired layout, and the centered USB port offers a lot of convenience. The separate USB-C daughterboard design allows for easy replacement in the event of damage, enhancing the maintainability of the board. The USB port outlet weight is sandblasted and plated with 24K gold, two processes that together create a unique and beautiful texture.
 

▲ 256 x 32 pixel Customizable OLED Monochrome Screen: The screen is sized to fit perfectly above the directional key area, and after many tests and redesigns, this is the largest size for a screen that can fit this keyboard without widening the bezel of the board. Second highest resolution used on a custom keyboard (the board with the current highest resolution is Mountain by Equalz, which utilizes a 256 x 64 pixel screen). The screen interface and keyboard drivers were designed collaboratively with HEXCORE, the team that designed the Anne Pro keyboards, which are well known globally. There are 6 different screen modes available (c.f. below), and additional modes can be added via drivers later.
 

▲ Separate CapsLock indicator and screen status indicators: More intuitive feedback on the keyboard status and ability to customize the RGB will be available via HEXCORE Software.
 
 
Internal Design
 

▲ Fully-isolated Gasket Mount: The keyboard's interior is held by gaskets vertically on the inside of the upper and lower case, with additional foam on the inner wall of the upper case to hold the interior in place in all horizontal directions as well, further isolating the contact between interior and case.
 
The interior comes into contact with the soft impact-absorbing foam gaskets. The foam used to fix the plate vertically is made of Japanese Inoue 20A durometer poron, and the horizontal-fixing foam is made of 50A durometer poron.
 

 
▲ Split PCB Design: As everyone knows, the asymmetry between the left and right zones of the 80% layout can make it difficult to achieve a balanced feel with the keyboard, and many designs use a single PCB with spacing in the PCB between the main and directional key areas to divide the plate between the two areas where possible. Other keyboards adopt a similar idea, but fully dividing the inner structure to provide a better feel. The separate PCBs and plates for the different sections is key to the TENET70, optimizing feel and sound uniformity while also giving the keyboard the ability to switch between regular and southpaw layouts.
 
└ 1.2mm PCB: The thinner PCB gives a better feel and flexibility. The PCB was designed and developed by the Anne Pro team, which not only provides exclusive drivers to handle keymapping, macros, software updates and support, but also develops original OLED screen drivers for the TENET70 keyboard, and allows for automatic recognition of both [Regular and Southpaw] layouts (c.f. below).
 

▲ The plate: The initial plan was to use a brass plate and design a leaf spring mount, but after multiple prototypes and comparisons between them, the best plate material to use was decided to be PC (other material TBD), a material whose flexibility is unmatched by using a metal material. With a matte finish, the PC plate has an improved resistance to scratches and more texture.
 

▲ Custom silicone pad for plate foam: The custom 30A durometer silicone pad gives a fuller feel to the keys than the poron foam, although the cost is higher. The pad is easier to assemble for the user, with a more coherent and nicer-looking color. In contrast to the 2D knife-cut poron, the 3D injection molded silicone pad fits better around the switches, especially the longer keys, wrapping snugly around the sides of the stabilizers. Poron stabilizer shims will also be provided.
 
└ 1mm Case Foam: The 1mm thick 20A durometer Japanese Inoue poron is used again here as case foam, which fills the gap between the case and PCB, reducing the hollowness of the case as well as the resonance, as well as providing some protection from the PCB bending too much and coming into contact with the bottom case and shorting out. In order to achieve a front height of 18mm, we contacted the PCB suppliers if it was possible to reduce the distance between the PCB and the lower case as much as possible without affecting ordinary use, thus creating a slimmer aesthetic look to the case, as well as reducing excessive PCB flex, which should allow the user to enjoy hotswappability with less worry about snapping the PCB. Due to the special weighting and design concept of the cable outlet, the kit comes with a foam pad above the USB-C daughterboard to further fill out any empty space and eliminate hollow case sounds.
 
Transformable Layout

 

▲ One keyboard with two layout configurations: You can quickly switch to match your desire. The completely horizontally symmetrical design of the mounting mechanism for the bottom weight to the lower case mentioned earlier, as well as the split-PCB design for the different areas, allow for a more harmonious appearance and a better typing experience.
 
It also serves another unique purpose: to allow transformable layout configurations. The ability to switch between a Regular (directional key section to the right of the main keys) to a Southpaw (arrow keys to the left) layout. The trouble with 80% layouts with the isolated arrow and macro key section, while clean and more straightforward to use, inadvertently steals from the mouse's effective area of movement. In order to give the mouse more space, the southpaw layout was designed with this in mind. Rather than being torn between the tradeoffs between each layout, the TENET70 allows you to use both. To switch between the two layout configurations after assembly, all the user has to do is to undo the screws holding the upper and lower cases together, disconnect the cables between the PCBs, and switch the different area PCBs around, disconnect the bottom weight from the lower case, then rotate the upper and lower case by 180° and reassembling the keyboard as such. Although slightly tedious, the whole switching process doesn't damage the keyboard and can theoretically be switched as many times as desired without affecting lifespan.
 

▲ Hotswappable: Supports both regular and stepped caps lock key
 

▲ Solderable: Supports ISO, Split Backspace and Split Shift.
 
PCB Software and OLED Interface
 
TENET PCB Firmware, Driver and Management Software are designed collaboratively with HEXCORE, the team that designed the Anne Pro keyboards.
 

 
▲ HEXCORE ObinsKit Software, you can achieve more than what QMK+VIA can do:
└ All OS Support: Windows, MacOS, Linux
└ Modify Keys and layers
└ OLED Screen Customization
└ RGB Customization
└ Marco
 

▲ Dashboard: The UI in overview mode was originally designed to give the user a summary of a mix of elements. This provides you with time, date, day of the week, upper/lowercase status, typing speed, keymap layer, and a real-time keymap!
 

▲ Type mode: In my opinion, the most interactive and fun of all the interface modes. The purpose of this mode is to enhance the most basic function of the keyboard, namely typing. This provides the user's kpm, a realtime line graph of the user's kpm over the last 60 seconds, a kpm speedometer inspired by motorbike tachometers, and an input counter. Keep your keyboard screen a visual representation of your typing speeds at all times, so you can relax, calm your mind and regain confidence after your next creative inspiration block.
 

▲ Monitor mode: How can you make the keyboard enhance the experience of using your computer? In monitor mode, the OLED screen provides real-time visual feedback about the temperatures of various components of your computer.
 

▲ Metakey Metakey is the name of our custom keyboard studio, founded in September of 2020. The word meta has the meaning of primary, first and most fundamental. The name was adopted because we considered the design of the keyboard itself the most important thing to our studio.
 

▲ Clock mode: The clock mode is one of my personal favorites and the one I have used the longest, on my own keyboard. A simple four digits to calibrate my own inaccurate perception of time.
 

▲ Custom Logo mode: With the PC-side software, any image set will be converted to a monochrome 256 x 32 pixel black and white image, then synced to the keyboard's screen. (PC-side driver created by the HEXCORE team.)
 

▲ Custom Text mode: Customize any text and display it on the screen with the PC-side software. (Supports multiple alignment methods, as well as dynamic scrolling.)
 
Colorways
 
Please note colorways below are not final and may change during GB. Weight and Case color combination are for illustration purpose.
 
▼ Anodized Black with Sandblasted Brass Weight

 
▼ Anodized Navy with Sandblasted Brass Weight

 
▼ Electrophoresis Warm White with Sandblasted Brass Weight

 
▼ Coating Pink with Black Alu Weight

 
▼ Coating Red with Black Alu Weight

 
▼ Anodized Light Green with White Alu Weight

 
▼ Anodized Black with Black Alu Weight

 
▼ Anodized Navy with White Alu Weight

 
▼ Electrophoresis Gold with Black Alu Weight

 
▼ Electrophoresis Warm White with White Alu Weight

 
Specification
 

 
► Dimensions: 374 x 115 x 30mm
► Materials:
- Full Aluminum: Aluminum Case and Weight components
- Aluminum Case + Brass Weight: Aluminum case with Sandblasted Brass (main weight component), Sandblasted Gold-plated Brass (weight component with USB outlet)
- FE: To be determined
► Colorways:
- Anodized: Black, Navy, Light Green
- Coating: Red, Pink
- Electrophoresis: Warm white, Yellow
Colors are TBD and not yet confirmed, renders may use colors that may not appear in the actual GB.
► Layout: Regular or Southpaw - 70% (FRL, no keypad, extra function keys on both sides of the arrow keys)
► Plate material: PC
► Mount: Isolated Gasket Mount
► Multifunctional OLED Screen: 7 screen mode (see above “PCB Software and OLED Interface” for detail)
► PCB:
- Integrated Dual PCB - main and func&direction region
- Hotswap with per-key RGB underglow
- Soldered with ISO, Split Backspace, WKL row and Split Shift Support
- USB-C daughterboard
► PCB and OLED Screen Software: HEXCORE ObinsKit. Fully customizable. All OS Supports: Windows, MacOS, Linux
► Typing angle: 8°
► Front height: 18mm
► Transformable Layouts: layout can be quickly interchangeable between Regular and Southpaw Layout
 

▲ Exploded View
 

▲ Components
 
Product Photos
 
Please note colorways below are not final and may change during GB. Weight and Case color combination are for illustration purpose.
 






 
By shipkie:












 
By nearfar:



 
Credits
 
I would like to thank all the people who have helped me along the way, Mr. Luo, Dog Handsome, SIX, Che Sis, Bro Li, etc. too many people to mention. As a first keyboard, from creating the initial design ideas more than a year ago, to running to the factory again and again, to getting my first prototypes that I was happy with, I've experienced and learned so much in my time in this project.
 
Unboxing and Build

Stay tuned for more!
 
Q&A
 
Why is it called TENET?
"Tenet" is one of the few palindromes in English, and it means "creed", "purpose", "principle". Other similar palindromes are kayak, racecar, level, etc.  Having decided on the design feature of a changeable layout, I felt I had to find a palindrome to fulfill the role of this keyboard's name. A palindrome that could be read from left to right and right to left, just as the keyboard can be built both right-handed and left-handed.
 
Why is there no F row?
I personally prefer the 60/65 column and size specification, but couldn't bear the thought of having 80% separate arrow keys, as well as pgup, pgdn, insert, delete etc., so I opted for the rarer column size of 70%.
 
What is the purpose of the extra buttons to the left and right of the arrow keys?
The default is to switch between screen modes, but you can also customize them to any key, layer cut, shortcut, macro, etc.
 
Will there be other materials for plates?
Other materials have been considered, such as aluminum, brass, POM, forged carbon, etc. During GB, there may be an option for additional plates that can be purchased separately.
 
Will there be more on-screen interface modes for the OLED?
Other modes may be available at a later stage, but that's all I can think of and implement at the moment, from taking the functional requirements and design concepts to the team at Anne Pro2, also known as HEXCORE, to implementing the details step by step and fixing the problems, to having a satisfactory finished product now, it's really been a non-stop process. The firmware of the keyboard will be upgraded, so there are plans to fix issues and introduce new features.
 
Is this an in-stock or groupbuy? What colors will be available?
This will be a groupbuy, and so has a wider range of customization available. Colors available may change.
 
Will this be unlimited groupbuy?
Yes.
 
When will the groupbuy start?
We don’t know yet. But we plan to do it in 2-3 months.
 
What will be the price?
We haven’t finalized groupbuy pricing yet. In the upcoming groupbuy, there will be a full alu version available for at lower price. For China in-stock sale, the Anodized Sandblasted Weight version price was set at $518 (3299CNY).
 
Interested?
 
This group buy will be handled by ClickClack.io and please contact the platform for more information.
 
Join ClickClack Discord for latest update, discussion, questions:

 
Fill in Interest Check Form:

 
Follow Clickclack's IG for other new projects:

 

[murpy]

Damn these April fool's posts are getting good /s

Sent from my ONEPLUS A3000 using Tapatalk

[ClickClack.io]

Damn these April fool's posts are getting good /s

Sent from my ONEPLUS A3000 using Tapatalk

Well, unboxing and build streams don't lie.

[Zeelobby]

This is actually pretty cool. What a day to launch. Haha.

Sent from my Pixel 3 XL using Tapatalk

[unwashed_heathen]

This board is awesome. Left a comment on one of the build videos a few weeks ago praying for an international release, so hallelujah I guess .

[P103]

If the joke is to make me read all that, well jokes on you I can't read. Nice pictures tho.

[Blamas]

Looks great ! Can we have closer pictures of the engraving on the back ?

[J_Noes]

Really hoping it will support split backspace and a solder pcb

[MKBFR]

Love the screen. Could it be possible to show the price of Bitcoin or an other cryptocurency ? would be amazing ! i'm sure a lot of crypto fans will love it

[Hentoys]

Super cool! I sure love me a big weight.

[Ustinj]

I love the design and innovation, I really admire this board!

[MSA_Vision]

Finally, let's go!! The best sound test

[noodleman]

Saw this board from z frontier glad to see it get an international release!  Very interested!

[wil]

dream board here. will this be unlimited?

[iaman]

The way y'all handled the separate PCBs is a brilliant solution to a problem I had run into when thinking through a layout I wanted to produce a few years back. Cheers to y'all for pushing that solution forward in such an elegant design.

[milka158]

looks absolutely amazing. Wish there would be split backspace support too!

[Keeblet_257]

I can decide if I want southpaw or not? Count me IN

[Ghostinn]

This is absolutely amazing. Was reading the beginning and hoping it wasn't a joke, so glad it isn't

[LumiP]

Been waiting for this one. I'm in there.

[CrlaoSvloadr]

Pretty stunning board, inside and out.
Massive fan of the layout and avidly look forward to hearing more from this!

On a side note, are there any possibilities of opting out of the screen feature? Either in favour of a blank space or badge? I realize this is a pretty significant feature of the board and I ask only because it would be perfect for my own personal taste apart from said screen.

Good luck with the IC!

[marici22]

That looks hot. I gotta stop spending money on keyboards but it's hard to resist

[psvntrm]

I support this.

[Pensa73]

I wouldn't even build this, I love how it looks internally

[shipkie]

 :eek:Oh my God, how can it be so handsome, I love this keyboard to death, I'm about to suffocate, who will help me. If you don't buy it, you will definitely regret it for a lifetime.

[shipkie]

A combination of classical and modern, solemn and elegant. This keyboard is not just an input tool, I feel more like a work of art, saying so much for only one purpose, shut up and take my money.

[kolxy]

Damn this is nice, I want to buy one.

E-yellow is also my favorite color, I'm so glad it's offered.

[beyzul]

Love the weight design and overall concept, they're super naise

please consider adding the wine-red/burgundy anodization colour into this run!

[LumiP]

+1 wine red/burgundy

[TyPo.mk]

I like this

[ClickClack.io]

Love the screen. Could it be possible to show the price of Bitcoin or an other cryptocurency ? would be amazing ! i'm sure a lot of crypto fans will love it

No plan for crypto payment as of now. Will consider in future product release.

[kolxy]

Is there going to be an option for 1.25u ctrl, win, alt like traditional TKL layout?

[ClickClack.io]

dream board here. will this be unlimited?

Yes, it will be unlimited.

[ClickClack.io]

Looks great ! Can we have closer pictures of the engraving on the back ?

Yes. We will add more pictures in the next few weeks.

[ClickClack.io]

Hi guys,

Please review the rewritten IC post with many more product pictures.

Feel feel to join our discussion in our Discord!

Thank you!

[hottrout]

Hmmm, interesting little project.

[boku]

Wow what a great idea for a board, and great IC too. I’d love to have the option of a WKL top if possible. Could be an add-on

[Robert.Lussier5]

really cool looking board and innovative for sure. Looking forward to the group buy.

[IvarLJ]

I guess BT is not in the cards?


Sent from my iPhone using Tapatalk

[savovo]

This is a for-sure cop for me. Beautiful board, y'all!

[SafeAtShore]

Steep typing angle aside, the rest of the board is just so well thought-out.

No QMK support is actually out of the ordinary. I don't think I mind that, since this is a larger board and the firmware is backed by a relatively well-known company.

Also, I take back what I said about wanting lavender as an option; I'm already torn between warm white and light green.

[Bobatype]

Gorgeous and creative keyboard. Saw this on zFrontier a while ago, so I'm super happy that there's going to be an opportunity for those outside of China to grab one. I'm a sucker for southpaw and OLED is a sweetener on top. Great job oy2r!

It appears that the OLED screen is well implemented and supported so that's a big plus.
Suggestions:
- Add some modes like a fun animation (like bongo cat typing [bonus if animation speed is variable, dynamically changing with WPM [also displayed as there's enough screen estate there]), or Dino jumping cactus/dodging pterodactyl, or something more chill).
- Another mode idea is something related to audio (music equalizer animation bar graphs just look cool aesthetically ; and a volume indicator could be a nice touch).
- Could you have an animated mode that has the word 'TENET', and it rotates every 60 seconds? The reason why I say TENET and not TENET70, is because in the logo you have (TENƎ⊥), it's obviously an ambigram (looks the same when looked at upside down), which just encompasses the rotating theme even more.
- I'm not sure what the risk of burn in is, but that's something to be aware of, especially in the Metakey and custom Logo static modes; you might want that mode to have some sort of animation/screensaver that turns on once in a while.

This is one of the few where I feel the brass weight actually complements the theme strongly aesthetically, but my wallet says you can't really see the bottom in normal use cases lol. So sadly might just opt for aluminium.
In the post, you've written "Electrophoresis Warm White with Black Alu Weight", however the image shows Electrophoresis Warm White with White Alu Weight. I'm actually wondering which is the actual one that will be offered?
I'm also curious about what the white top with black weight combination would actually look like too.

In regards to the Hotswap PCB layouts:
Hotswap PCB shouldn't have split right shift (1.75u Shift + 1.0u Fn) forced in my opinion.
The default should be the 2.75u right shift, with split right shift only as an option if possible. My reasoning is twofold:

1) It looks better aesthetically due to both modifiers being one key only, instead of the right side shift modifier being two keys. 'Symmetry' is nice since you're forcing the Tsangan bottom row (whose appeal is because of it's symmetrical looking, which fits the whole vibe of the keyboard)
2) People who opt for Hotswap are typically less experienced enthusiasts, and thus probably more familiar and wiling to use the TKL right shift 2.75u, then the split right shift option.

But maybe this is just my bias against split right shift coming through. I'm not 100% against it, just not a fan. I guess one advantage of split shift is one less stab to install means less work and potential rattle ha.

If possible, add in split backspace support to Hotswap PCB to further expound on the symmetry aesthetic. I appreciate making both stepped and non-stepped caps lock a possible option in the hotswap PCB though! Would suggest looking at Wuque Studios designs (iikki68 Aurora and Mammoth75), as they somehow manage to finesse plenty of options such as split backspace, and split spacebar, into their hotswap PCBs.

[conternecticus]

Personally I will wait for the more affordable alu version.
I love Tenet the movie, as much as I love this board. Watched a few Youtubers built this board and I love it. GLWIC!

[Botty212]

Gorgeous and creative keyboard. Saw this on zFrontier a while ago, so I'm super happy that there's going to be an opportunity for those outside of China to grab one. I'm a sucker for southpaw and OLED is a sweetener on top. Great job oy2r!

It appears that the OLED screen is well implemented and supported so that's a big plus.
Suggestions:
- Add some modes like a fun animation (like bongo cat typing [bonus if animation speed is variable, dynamically changing with WPM [also displayed as there's enough screen estate there]), or Dino jumping cactus/dodging pterodactyl, or something more chill).
- Another mode idea is something related to audio (music equalizer animation bar graphs just look cool aesthetically ; and a volume indicator could be a nice touch).
- Could you have an animated mode that has the word 'TENET', and it rotates every 60 seconds? The reason why I say TENET and not TENET70, is because in the logo you have (TENƎ⊥), it's obviously an ambigram (looks the same when looked at upside down), which just encompasses the rotating theme even more.
- I'm not sure what the risk of burn in is, but that's something to be aware of, especially in the Metakey and custom Logo static modes; you might want that mode to have some sort of animation/screensaver that turns on once in a while.

This is one of the few where I feel the brass weight actually complements the theme strongly aesthetically, but my wallet says you can't really see the bottom in normal use cases lol. So sadly might just opt for aluminium.
In the post, you've written "Electrophoresis Warm White with Black Alu Weight", however the image shows Electrophoresis Warm White with White Alu Weight. I'm actually wondering which is the actual one that will be offered?
I'm also curious about what the white top with black weight combination would actually look like too.

In regards to the Hotswap PCB layouts:
Hotswap PCB shouldn't have split right shift (1.75u Shift + 1.0u Fn) forced in my opinion.
The default should be the 2.75u right shift, with split right shift only as an option if possible. My reasoning is twofold:

1) It looks better aesthetically due to both modifiers being one key only, instead of the right side shift modifier being two keys. 'Symmetry' is nice since you're forcing the Tsangan bottom row (whose appeal is because of it's symmetrical looking, which fits the whole vibe of the keyboard)
2) People who opt for Hotswap are typically less experienced enthusiasts, and thus probably more familiar and wiling to use the TKL right shift 2.75u, then the split right shift option.

But maybe this is just my bias against split right shift coming through. I'm not 100% against it, just not a fan. I guess one advantage of split shift is one less stab to install means less work and potential rattle ha.

If possible, add in split backspace support to Hotswap PCB to further expound on the symmetry aesthetic. I appreciate making both stepped and non-stepped caps lock a possible option in the hotswap PCB though! Would suggest looking at Wuque Studios designs (iikki68 Aurora and Mammoth75), as they somehow manage to finesse plenty of options such as split backspace, and split spacebar, into their hotswap PCBs.

I personally like the split right shift and tsangan bottom row combination since it reduces the amount of required stabs and has a cleaner bottom row while just moving the FN key one row higher.

However I dont really like adding multiple support for different things on a hotswap PCB if it makes the switches underneath the keycap north or even east/west facing. I have had  board that made the / | Key east facing because they wanted to implement iso hs for example. Yeah it wasnt a great experience.

As for the statement regarding lesser enthusiasts and hotswap that you made in the post. I dont think that it is that accurate of an statement. I know plenty of ppl that I would consider enthusiasts which however like the "normal" right shift more than the split one. In my opinion, preferences dont determine if someone can be called a enthusiast or lesser enthusiastic about this hobby and shouldn't be ranked on a scale based on what they might prefere more.

Your OLED ideas are great and I like them personally a lot, would like to see them implement it. You were really creative there.

EDIT
corrected typos

[killerjustin1087]

I really like the OLED screen 

[Bobatype]

I personally like the split right shift and tsangan bottom row combination since it reduces the amount of required stabs and has a cleaner bottom row while just moving the FN key one row higher.

However I dont really like adding multiple support for different things on a hotswap PCB if it makes the switches underneath the keycap north or even east/west facing. I have had  board that made the / | Key east facing because they wanted to implement iso hs for example. Yeah it wasnt a great experience.

As for the statement regarding lesser enthusiasts and hotswap that you made in the post. I dont think that it is that accurate of an statement. I know plenty of ppl that I would consider enthusiasts which however like the "normal" right shift more than the split one. In my opinion, preferences dont determine if someone can be called a enthusiast or lesser enthusiastic about this hobby and should be ranked scale based on what they might prefere more.

Your OLED ideas are great and I like them personally a lot, would like to see them implement it. You were really creative there.

That's fair enough, I was possibly being presumptuous in my assumption of what ppl prefer in terms of right shift split; it's probably enthusiasts that have severe hard-on for symmetry and less keys [cough WKL] Anyways, I would like it if they could both support 2.75u, alongside split right shift too as an option, as that's my aesthetic preference in terms of overall balance (I think it looks cleaner this way, but that's subjective; as I just make the right Super and Ctrl keys act as my Fn/Meta keys).
I'm not a PCB designer, so I'm not exactly sure what the technical limitations around which switches are being forced to be non-South facing orientation when providing hotswap support for multiple layouts. But if they can do it for just the right shift, and split backspace (hey, 1 less stab), I'd be happy as a filthy casual who doesn't like to solder switches (but worse comes to worse, I can always millmax the solder PCB in the end if this isn't possible).

[Nurseh]

Wow, south paw and OLED? Color me impressed!

[noodleman]

Any chance for split back space support as well?

[ZavaZ86]

Would be nice to see some info/addressing of the issues with the chinese gb and whether not those issues would be fixed for this gb.

[VAMP]

was waiting for this to come to the international market. im in!

[Zeelobby]

Would be nice to see some info/addressing of the issues with the chinese gb and whether not those issues would be fixed for this gb.

What were those? Would be good to have them here for reference.

Sent from my Pixel 3 XL using Tapatalk

[ClickClack.io]

Would be nice to see some info/addressing of the issues with the chinese gb and whether not those issues would be fixed for this gb.

Please advise. There are no issue with TENET's in-stock sale units in China we know of.

[ClickClack.io]

Gorgeous and creative keyboard. Saw this on zFrontier a while ago, so I'm super happy that there's going to be an opportunity for those outside of China to grab one. I'm a sucker for southpaw and OLED is a sweetener on top. Great job oy2r!

It appears that the OLED screen is well implemented and supported so that's a big plus.
Suggestions:
- Add some modes like a fun animation (like bongo cat typing [bonus if animation speed is variable, dynamically changing with WPM [also displayed as there's enough screen estate there]), or Dino jumping cactus/dodging pterodactyl, or something more chill).
- Another mode idea is something related to audio (music equalizer animation bar graphs just look cool aesthetically ; and a volume indicator could be a nice touch).
- Could you have an animated mode that has the word 'TENET', and it rotates every 60 seconds? The reason why I say TENET and not TENET70, is because in the logo you have (TENƎ⊥), it's obviously an ambigram (looks the same when looked at upside down), which just encompasses the rotating theme even more.
- I'm not sure what the risk of burn in is, but that's something to be aware of, especially in the Metakey and custom Logo static modes; you might want that mode to have some sort of animation/screensaver that turns on once in a while.

This is one of the few where I feel the brass weight actually complements the theme strongly aesthetically, but my wallet says you can't really see the bottom in normal use cases lol. So sadly might just opt for aluminium.
In the post, you've written "Electrophoresis Warm White with Black Alu Weight", however the image shows Electrophoresis Warm White with White Alu Weight. I'm actually wondering which is the actual one that will be offered?
I'm also curious about what the white top with black weight combination would actually look like too.

In regards to the Hotswap PCB layouts:
Hotswap PCB shouldn't have split right shift (1.75u Shift + 1.0u Fn) forced in my opinion.
The default should be the 2.75u right shift, with split right shift only as an option if possible. My reasoning is twofold:

1) It looks better aesthetically due to both modifiers being one key only, instead of the right side shift modifier being two keys. 'Symmetry' is nice since you're forcing the Tsangan bottom row (whose appeal is because of it's symmetrical looking, which fits the whole vibe of the keyboard)
2) People who opt for Hotswap are typically less experienced enthusiasts, and thus probably more familiar and wiling to use the TKL right shift 2.75u, then the split right shift option.

But maybe this is just my bias against split right shift coming through. I'm not 100% against it, just not a fan. I guess one advantage of split shift is one less stab to install means less work and potential rattle ha.

If possible, add in split backspace support to Hotswap PCB to further expound on the symmetry aesthetic. I appreciate making both stepped and non-stepped caps lock a possible option in the hotswap PCB though! Would suggest looking at Wuque Studios designs (iikki68 Aurora and Mammoth75), as they somehow manage to finesse plenty of options such as split backspace, and split spacebar, into their hotswap PCBs.

Thank you for your feedback! Fixed IC typo. And will bring those OLED design ideas back to designer.

[lush_bunny]

omg. I want.

[ClickClack.io]

omg. I want.

Thanks for the support! Please sign up via Google forms or join our Discord for more updates.

[neoknob]

Amazing Work! Looking Great

[YTI]

Must have.


Sent from my iPhone using Tapatalk

[ClickClack.io]

For those who want a their favorite creator to review TENET, please leave the creator’s name in the comment section, and we will count it as a vote too, thank you.

[YTI]

For those who want a their favorite creator to review TENET, please leave the creator’s name in the comment section, and we will count it as a vote too, thank you.

TaehaTypes , Alexotos

[Botty212]

For those who want a their favorite creator to review TENET, please leave the creator’s name in the comment section, and we will count it as a vote too, thank you.

nearLucid

[Wham Brothers]

Finally some treat for left hand users and fits the tenet theme. hope this is the gonna be good.

[4milk]

Thanks for sharing the China price, I am interested in the all alu version

[ClickClack.io]

For those who want a their favorite creator to review TENET, please leave the creator’s name in the comment section, and we will count it as a vote too, thank you.

TaehaTypes , Alexotos

Thanks for the suggestion, both will review the board.

[FearsomeCubedWarrior]

Is it possible to introduce option to customize central weight to be blank?
Also, I would reconsider Metakey| logo? I can't help, but read it as a Metakek. And this one doesn't seem like a meme board.

[ImaSpacePotato]

Going to echo the request for a non-split right shift. I think the board would look a lot nicer with a more symmetrical look, especially since you're already going for the 7u spacebar layout.

[ClickClack.io]

Is it possible to introduce option to customize central weight to be blank?
Also, I would reconsider Metakey| logo? I can't help, but read it as a Metakek. And this one doesn't seem like a meme board.

Currently we don't have the option to customize central weight. We will forward your feedbacks to the studio. Thanks.

[ClickClack.io]

Going to echo the request for a non-split right shift. I think the board would look a lot nicer with a more symmetrical look, especially since you're already going for the 7u spacebar layout.

For the solder PCB, there will be non-split right shift support and also ISO support!

[^prince]

That weight is really unique. Love it!

[ClickClack.io]

Some updates about sample making process. Metakey is currently making samples of full ALU version. However, due to the COVID lockdowns in China, it has been impacted.

[shendoo]

Absolutely love this board. I am 100% in!! Can't wait to see this hit the GB! Well done!

[Sandy]

Has the build process, stiffness, glare at an angle on led been resolved from the chinese sale? I recall those being mentioned on zf and many units going up for sale right after the buy with no markup. Also obins may offer the features you want for the oled but i am very hesitant to accept that you can do more with it. Tap hold features And other customizations don’t work as well. I am not the center of the universe but after using obins and permanently shelving my fuji I’m hesitant to buy

(EDIT: After posting I realise I can't find the original source of the glare and stiffness post I saw on zf additionally the amount of units was larger than I recall so the amount that I saw go up for sale seems proportional in hindsight)

[ClickClack.io]

Has the build process, stiffness, glare at an angle on led been resolved from the chinese sale? I recall those being mentioned on zf and many units going up for sale right after the buy with no markup. Also obins may order the features you want for the oled but i am very hesitant to accept that you can do more with it. Tap hold features And other customizations don’t work as well. I am not the center of the universe but after using obins and permanently shelving my fuji I’m hesitant to buy

With Transformable Layout and OLED screen, TENET is a sophisticated design overall. In the R1, Metakey have never heard about any complains about excessive glare on screen. Stiffness is more of a personal feeling. We cannot judge for anyone. Obins' software and firmware cover most of customization support for layout and led. Maybe only very few advanced customizations are missing. But good thing is that it is commercially supported and it keeps evolving. At the end of day, different firmwares and Softwares have different focus. The multifunctional on-board screen is one key feature of TENET design. Supporting a screen, with things like CPU usage metrics function, is out of scope of QMK. So it's a tradeoff.

[EdgeOfInfinity]

some nice innovation here!

[BasedCoper]

Looks solid. Though would there be an option to give up the flippable sides or just have other tops in order not have keys around the arrows like most other FRLs?

[ClickClack.io]

Looks solid. Though would there be an option to give up the flippable sides or just have other tops in order not have keys around the arrows like most other FRLs?

That's not possible. The entire design is focused on Transformable Layout, like split PCB, symmetric case and that 6 key arrow key section. That would also make it like a regular TKL without functional row.

[granola bar enthusiast]

happy to see the board using obin's, originally downloaded the software 3 years ago when i got my Anne Pro and it has been lying on my PC unused ever since i built my first board. also since i am a simp for southpaw layout's I'm happy to see that also

[3yatt]

Any chance for PC case?

[ClickClack.io]

Any chance for PC case?

We will discuss with the designer and let you know.

[yangsiyin]

That looks amazing man. Missed the GB last year but definitely will on it this time.

[Sandy]

Has the build process, ...

With Transformable Layout and OLED screen, TENET is a sophisticated design overall. In the R1, Metakey have never heard about any complains about excessive glare on screen. Stiffness is more of a personal feeling. We cannot judge for anyone. Obins' software and firmware cover most of customization support for layout and led. Maybe only very few advanced customizations are missing. But good thing is that it is commercially supported and it keeps evolving. At the end of day, different firmwares and Softwares have different focus. The multifunctional on-board screen is one key feature of TENET design. Supporting a screen, with things like CPU usage metrics function, is out of scope of QMK. So it's a tradeoff.

Thanks for the reply! You're certainly right stiffness is more of a personal feeling. I regret that it took me so long to make the edit to my statement I couldn't find the early post I thought I read the review on but left it in case you had a response. I'm glad you haven't heard of glare issues on the screen and after looking at videos on bilibilli of the oled it certainly does seem pretty feature rich. So yes a tradeoff.

The price for the in stock sale in china was competitive for the complexity although on the higher side. Will the price be similar considering the increased costs of an international sale while considering the decreased costs of not needing to front for production?

[ClickClack.io]

Has the build process, ...

With Transformable Layout and OLED screen, TENET is a sophisticated design overall. In the R1, Metakey have never heard about any complains about excessive glare on screen. Stiffness is more of a personal feeling. We cannot judge for anyone. Obins' software and firmware cover most of customization support for layout and led. Maybe only very few advanced customizations are missing. But good thing is that it is commercially supported and it keeps evolving. At the end of day, different firmwares and Softwares have different focus. The multifunctional on-board screen is one key feature of TENET design. Supporting a screen, with things like CPU usage metrics function, is out of scope of QMK. So it's a tradeoff.

Thanks for the reply! You're certainly right stiffness is more of a personal feeling. I regret that it took me so long to make the edit to my statement I couldn't find the early post I thought I read the review on but left it in case you had a response. I'm glad you haven't heard of glare issues on the screen and after looking at videos on bilibilli of the oled it certainly does seem pretty feature rich. So yes a tradeoff.

The price for the in stock sale in china was competitive for the complexity although on the higher side. Will the price be similar considering the increased costs of an international sale while considering the decreased costs of not needing to front for production?

The price will be similar to the first round of in-stock sale. But due to the sky rocketing raw material cost, Metakey mentioned it might be a little higher than R1. We understand the pricing is very important and we will pass to Metakey when set pricing in GB stage.

[rmendis]

Looks unique, which is saying a lot in this now crowded space with tons of copycats. Looking forward to this one

[KBKlon]

Will there be regional vendors?

[。]

cooool

[Botty212]

Will there be regional vendors?

most likely will be sold on clickclack.io only

[ClickClack.io]

Will there be regional vendors?

most likely will be sold on clickclack.io only

That is correct. TENET GB will be launched on clickclack.io and we ship globally.

[ClickClack.io]

Hi everyone,

Here is full list of reviewers for TENET:
Taeha Types
3ildcat
Switch and Click / Betty
Badseed
Clackbait
MechMerlin
Alexotos
DBOKeys
Apiary Keyboards
Keybored
nearLucid

Stay tuned for stream or videos!

[BasedCoper]

Hi everyone,

Here is full list of reviewers for TENET:
Taeha Types
3ildcat
Switch and Click / Betty
Badseed
Clackbait
MechMerlin
Alexotos
DBOKeys
Apiary Keyboards
Keybored
nearLucid

Stay tuned for stream or videos!

Switch and Click? 

[Botty212]

Hi everyone,

Here is full list of reviewers for TENET:
Taeha Types
3ildcat
Switch and Click / Betty
Badseed
Clackbait
MechMerlin
Alexotos
DBOKeys
Apiary Keyboards
Keybored
nearLucid

Stay tuned for stream or videos!

thats a big list. :O

[SDKCAMPING]

an insane and unique board, keen and watching. Love that this is something totally different from the run of the mill boards coming out usually

[DirtyGingy]

The more I read and explore this, the more interested I am. I'm not a fan of the proprietary software, but otherwise, I'm really liking the design and thoughtfulness

[yangsiyin]

Shut up and take my money

[Hikari909]

Is it possible to include PE foam? I know the sound of it is kind of overused nowadays but it would be a nice addition to those who like that sort of sound signature.

[BasedCoper]

Is it possible to include PE foam? I know the sound of it is kind of overused nowadays but it would be a nice addition to those who like that sort of sound signature.

NO.

[icey_keebss]

the design looks super complex i really like it

[Botty212]

Is it possible to include PE foam? I know the sound of it is kind of overused nowadays but it would be a nice addition to those who like that sort of sound signature.

just buy a roll of it from a local hardware store for like 5$ or something similar in price.

[ClickClack.io]

Hi guys,

First batch of package shipped to reviewers!

[ClickClack.io]

Hi everyone,

Here is full list of reviewers for TENET:
Taeha Types
3ildcat
Switch and Click / Betty
Badseed
Clackbait
MechMerlin
Alexotos
DBOKeys
Apiary Keyboards
Keybored
nearLucid

Stay tuned for stream or videos!

Hi everyone,

"Shoobs" is also on the list.

[BasedCoper]

Hi everyone,

Here is full list of reviewers for TENET:
Taeha Types
3ildcat
Switch and Click / Betty
Badseed
Clackbait
MechMerlin
Alexotos
DBOKeys
Apiary Keyboards
Keybored
nearLucid

Stay tuned for stream or videos!

Hi everyone,

"Shoobs" is also on the list.

SMH didn't give Blacked Simone an FRL.

[Kevin-3992]

Great project 

[Zyrophr]

Really happy to finally see this happening!
I hope I'll be able to get one

[phinix]

This is some next level **** right there...
Love it, but only thing that puts me off are those extra caps in arrows cluster. I would prefer some kind of masking caps to cover those.
I learnt to park my right hand fingers on top of arrow on TKL and having caps above left and right would freak me out

[ClickClack.io]

Hi everyone,

Review units has been shipped and many of them have received them already. We will share stream date once we have them. In the meantime, you can also follow them to watch unboxing and learn about build stream time there.

[ClickClack.io]

Hi everyone,

In case you missed Alexotos stream of first TENET build, here is a playback: https://www.twitch.tv/videos/1485870747

[Armaguard]

Dang, this is great. Surprised with no split spacebar. Would have topped it off for me but nevertheless!

[eggu]

✅70%
✅OLED
✅southpaw
✅smexy

Highly anticipating this one!

[Adelscott]

I want red with brass, make it happen please.

[CookieFlow]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

[ClickClack.io]

Hi everyone,

Upcoming build stream from MechMerlin, Sat May 21st 4:30PM EST @ https://www.twitch.tv/mechmerlin/schedule?seriesID=502182b0-df8c-4c02-a1ba-ecc82cba295e

Join our Discord, we usually send out notification in our discord first!

[ClickClack.io]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

Thank you for your suggestion! But these can be huge change to the design and sort of moving away from designer's original thoughts. We may consider these in the future design!

[CookieFlow]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

Thank you for your suggestion! But these can be huge change to the design and sort of moving away from designer's original thoughts. We may consider these in the future design!

I understand that this goes away from the original idea of being to swap the layout around.

But it seems that some people (myself included) really don't like the arrow cluster with the 6 keys.

I am not a designer, but on paper it seems like it could be an easy fix.
Everything on the board remains the same, except a new top piece that has 2 blockers to create a normal 4 keys arrow cluster.

But I totally understand that this goes against the vision of the designer and what makes this board unique.

[jdenyc]

Obinskit is a nice touch particularly with the PC side driver .. thoughts on opensourcing this or sharing the development here?

[ClickClack.io]

Clackbait's review will premier on May 22 at 11:00 AM, check it out:

[acerb]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

Thank you for your suggestion! But these can be huge change to the design and sort of moving away from designer's original thoughts. We may consider these in the future design!

I understand that this goes away from the original idea of being to swap the layout around.

But it seems that some people (myself included) really don't like the arrow cluster with the 6 keys.

I am not a designer, but on paper it seems like it could be an easy fix.
Everything on the board remains the same, except a new top piece that has 2 blockers to create a normal 4 keys arrow cluster.

But I totally understand that this goes against the vision of the designer and what makes this board unique.

Hi, you can always use some switch blocker. You can 3D print yours or even comission a badge for it. In both case it should make the design "clean" the way you'd like without preventing the users wanting to use those 2 extra keys (to pilot the screen from what I know). Something like that: https://pimpmykeyboard.com/switch-blocker-pack-of-10/

[CookieFlow]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

Thank you for your suggestion! But these can be huge change to the design and sort of moving away from designer's original thoughts. We may consider these in the future design!

I understand that this goes away from the original idea of being to swap the layout around.

But it seems that some people (myself included) really don't like the arrow cluster with the 6 keys.

I am not a designer, but on paper it seems like it could be an easy fix.
Everything on the board remains the same, except a new top piece that has 2 blockers to create a normal 4 keys arrow cluster.

But I totally understand that this goes against the vision of the designer and what makes this board unique.

Hi, you can always use some switch blocker. You can 3D print yours or even comission a badge for it. In both case it should make the design "clean" the way you'd like without preventing the users wanting to use those 2 extra keys (to pilot the screen from what I know). Something like that: https://pimpmykeyboard.com/switch-blocker-pack-of-10/

I will look into this thanks.

However I wasn't trying to prevent users that want the current config. I just suggested to offer both top options.
In a similar way that some boards are offered in WK, WKL and HHKB configurations.

Also I didn't really think my idea would be taken into consideration as it goes against the core concept of the board.
It was just a suggestion since I have seen a few people saying they aren't a fan of the 6 keys arrow cluster.

[LegendsWorks]

I'm loving it

[Invezting]

Sick board! Love the film.

[BarryBoy]

Any possible way it will have PE Foam included at gb time?

[jdenyc]

Definitely unique and interesting.

Personally not a fan of the 2 oval cutouts for the LED's on each side, I think it would look cleaner without them.
I would have also prefered a standard arrow cluster and the option to choose southpaw or standard at checkout.
I understand the gimmick is the symmetry and the ability to swap, but I feel most people have a preference and will not swap the layout around.
I am not sure that this gimmick is worth the trade-offs in design and complexity of the board for me.
I love the colors, the OLED and the back.

I think it could be a nice idea to offer a "fixed" edition along side the current version of the TENET, but with a fixed southpaw or standard FRLTKL layout.
I feel this should be fairly simple by keeping everything the same, except changing the top case with a fixed layout with a normal arrow cluster without the 2 keys next to the top arrow as some people seem to dislike this design part.

Thank you for your suggestion! But these can be huge change to the design and sort of moving away from designer's original thoughts. We may consider these in the future design!

I understand that this goes away from the original idea of being to swap the layout around.

But it seems that some people (myself included) really don't like the arrow cluster with the 6 keys.

I am not a designer, but on paper it seems like it could be an easy fix.
Everything on the board remains the same, except a new top piece that has 2 blockers to create a normal 4 keys arrow cluster.

But I totally understand that this goes against the vision of the designer and what makes this board unique.

Hi, you can always use some switch blocker. You can 3D print yours or even comission a badge for it. In both case it should make the design "clean" the way you'd like without preventing the users wanting to use those 2 extra keys (to pilot the screen from what I know). Something like that: https://pimpmykeyboard.com/switch-blocker-pack-of-10/

I will look into this thanks.

However I wasn't trying to prevent users that want the current config. I just suggested to offer both top options.
In a similar way that some boards are offered in WK, WKL and HHKB configurations.

Also I didn't really think my idea would be taken into consideration as it goes against the core concept of the board.
It was just a suggestion since I have seen a few people saying they aren't a fan of the 6 keys arrow cluster.

IIUC the 2 keys around the arrow cluster seem to be for manipulating the OLED pages by default - that's not too much of a bother IMHO - I guess you could do the same with a small rotary encoder, but that gets into the realm of complete redesign - may be better input for an r2.

OTOH, while I do understand the desire to promote obinskit and the additional functionality there, without a push towards OSS this is going to be extremely limiting in the future.  I'd love to see more designers embrace RPi and more functionality in an OLED in the future[1] .. but once again the better path here (IMHO) is typically around engaging the community with an OSS model, and I don't see this here.

---
[1] side note: it would seem trivial to me to include a full on PiZero or other SFF ARM based controller with storage and run a miniOS/Controller there for much more functionality rather than just simply trying to pull a monitor from a driver side agent

[CookieFlow]

Is there any hope that the stiffness of the board will be addressed before the GB?

[BasedCoper]

Is there any hope that the stiffness of the board will be addressed before the GB?

When the gasket doesn't gasket 

[ClickClack.io]

Is there any hope that the stiffness of the board will be addressed before the GB?

Hi there,

Some confirmed changes to improve typing feel:
1. Thiner PORON gaskets will be available in addition to original thicker set.
2. In addition to silicone pad, PORON mid layer will be available.

[CookieFlow]

Is there any hope that the stiffness of the board will be addressed before the GB?

Hi there,

Some confirmed changes to improve typing feel:
1. Thiner PORON gaskets will be available in addition to original thicker set.
2. In addition to silicone pad, PORON mid layer will be available.

Thanks for the update

I did really warm up to the 6 key arrow cluster and starting to really appreciate it

The only small negative of the board was the stiffness from the reviews, so I'm glad to see this is being addressed

[Dissitesuxba11s]

Interested after seeing Merlin's build. Looking good so far.

[less_blank]

This board has some cool things going for it but seems like typing feel & sound were sacrificed in favor of the design elements. it definitely does not need that many gaskets and not taking spacebar into account with the mounting points is a mistake.

[ClickClack.io]

:3ildcat:

Shoobs:

Switch and Click:

Keybored:

BadSeed:

[Retrias]

I have some question about the board layout
1. The hotswap pcb is always split right shift right ?
2. Can the solder pcb be southpawed just like the the hotswap pcb but still keeping the full right shift

[litaco]

I have some question about the board layout
1. The hotswap pcb is always split right shift right ?
2. Can the solder pcb be southpawed just like the the hotswap pcb but still keeping the full right shift

From the layout by TS
1. Yes
2. Both solder and hotswap PCB can build in normal or southpaw. Solder PCB have option for full right shift.

[cekagekh]

Is it true that the firmware does not support one-press layer toggle like the "TG" function in QMK, and additional layers can only be accessed while holding down the corresponding fn key? I asked because MechMerlin mentioned in his stream that with QMK he could press fn once and turn the bottom right corner of the 60% area into arrow keys, but he could not achieve that on the TENET 70.

[treeleaf64]

Good weight design, need better design for rest of board

[ClickClack.io]

Is it true that the firmware does not support one-press layer toggle like the "TG" function in QMK, and additional layers can only be accessed while holding down the corresponding fn key? I asked because MechMerlin mentioned in his stream that with QMK he could press fn once and turn the bottom right corner of the 60% area into arrow keys, but he could not achieve that on the TENET 70.

Tap is supported. This documentation may help you: https://service.hexcore.xyz/manual/obinskit/#23-layout-setting

[cekagekh]

Is it true that the firmware does not support one-press layer toggle like the "TG" function in QMK, and additional layers can only be accessed while holding down the corresponding fn key? I asked because MechMerlin mentioned in his stream that with QMK he could press fn once and turn the bottom right corner of the 60% area into arrow keys, but he could not achieve that on the TENET 70.

Tap is supported. This documentation may help you: https://service.hexcore.xyz/manual/obinskit/#23-layout-setting

I meant toggling to an fn layer, not extending modifiers. For example, I want to press fn1 once and release, and the keyboard stays at the fn1 layer. If I press any other key it sends the keycode on the fn1 layer (without having to hold down fn1 all the time). Press fn 1again and the keyboard switches back to the base layer. From what I understand from the documentation there's no way to do that. You have to hold down the fn1 key all the time in order to access the fn1 layer.

[ClickClack.io]

Metakey TENET Groupbuy Post Live