Author Topic: [GB] Klippe R3 Pre-Order  (Read 28754 times)

0 Members and 1 Guest are viewing this topic.

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
[GB] Klippe R3 Pre-Order
« on: Sun, 28 July 2019, 17:48:08 »
Reddit post

Store listing




Klippe is one of the best high end affordable keyboard kits on the market. With the most improved tray mount screw placement, machined stabilising points, PCB compability, fine tuned since 2017 for each revision, and originally based on the Fjell mounting. The case alone weighs over 1kg, which is up to a 40% increase compared to keyboard cases in the same price range. And the weight is not only just an added heft, it is distributed in the case walls to make the case pingless and promotes the switch feel. A combination of the mounting, weight and aluminium amount is why so many people say the Klippe and Fjell sound so great, and so different from other tray mount cases.


Now, for the first time, available as a kit ($199) & you only need to add:

Stabilisers
Switches
Keycaps




You can buy the case alone for $120, and the other parts for a good price as well.

Updates from the second design(rev. 2(Klippe 2019) to rev.3):

1mm height adjustment, slightly heavier.
USB hole adjustments, 1mm wider to the left for better hot swap compability
Better USB C compability 
Two Optional Mouning Points, same as Fjell Round 4
New colors.


Shipping estimated october - november 2019
 
« Last Edit: Wed, 31 July 2019, 05:46:06 by LeandreN »

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #1 on: Mon, 29 July 2019, 06:36:25 »
approval pls

(reserved)

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #2 on: Mon, 29 July 2019, 12:51:17 »

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #3 on: Tue, 30 July 2019, 05:51:03 »
:(

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1914
  • Location: Sweden
  • snoozing
Re: [GB] Klippe R3 Pre-Order
« Reply #4 on: Wed, 31 July 2019, 05:52:45 »
Approved! Lykke til  :thumb:
Very busy with studies atm.

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #5 on: Wed, 31 July 2019, 10:16:29 »
There is also possible to just buy the parts:



https://mekanisk.co/collections/keyboard-parts

Offline kipawazi

  • Posts: 23
Re: [GB] Klippe R3 Pre-Order
« Reply #6 on: Thu, 01 August 2019, 13:52:16 »
Coooool  ;D
I think I'm in.

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #7 on: Fri, 02 August 2019, 15:51:12 »
Coooool  ;D
I think I'm in.

Cool, thanks :)

Offline nyry43

  • Posts: 50
Re: [GB] Klippe R3 Pre-Order
« Reply #8 on: Fri, 02 August 2019, 16:18:52 »
I'm in for an ultramarine. Looks great!

Offline dwarflemur

  • Posts: 166
  • Location: cali
Re: [GB] Klippe R3 Pre-Order
« Reply #9 on: Fri, 02 August 2019, 17:20:59 »
joined for one
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline Lufenia

  • Posts: 77
Re: [GB] Klippe R3 Pre-Order
« Reply #10 on: Fri, 02 August 2019, 23:12:12 »
Anyone know how to polish the brass plate.  Both my brass plates came really scratched

Offline mSSM

  • Posts: 50
Re: [GB] Klippe R3 Pre-Order
« Reply #11 on: Sat, 03 August 2019, 05:44:26 »
The last Fjell had bad timing, so I missed it. But I am in on this one!  :D

Offline nickaster1

  • Posts: 194
Re: [GB] Klippe R3 Pre-Order
« Reply #12 on: Sat, 03 August 2019, 07:53:18 »
Do the plate and the pcb support alps?

Offline Lil

  • Posts: 272
    • designedbydark
Re: [GB] Klippe R3 Pre-Order
« Reply #13 on: Sat, 03 August 2019, 08:08:57 »
Got an ultramarine boys!
« Last Edit: Sat, 03 August 2019, 08:13:57 by Lil »

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #14 on: Wed, 23 October 2019, 03:09:07 »

Offline ConfuseBill

  • Posts: 69
Re: [GB] Klippe R3 Pre-Order
« Reply #15 on: Thu, 24 October 2019, 03:44:58 »
Hi LeandreN,

Is the PCB compatible for bottom right arrow key?
Cause i notice the bottom right plate has universal holes. If yes, is the Right shift ready for 1.75u?

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #16 on: Thu, 24 October 2019, 16:15:20 »
Hi LeandreN,

Is the PCB compatible for bottom right arrow key?
Cause i notice the bottom right plate has universal holes. If yes, is the Right shift ready for 1.75u?


Arrow keys on a 60% is not a standard feature and not a feature on this PCB.

The right shift can be split yes, that is part of the HHKB layout.

Have a nice day :)

Offline ConfuseBill

  • Posts: 69
Re: [GB] Klippe R3 Pre-Order
« Reply #17 on: Thu, 24 October 2019, 17:43:09 »
Hi LeandreN,

Is the PCB compatible for bottom right arrow key?
Cause i notice the bottom right plate has universal holes. If yes, is the Right shift ready for 1.75u?


Arrow keys on a 60% is not a standard feature and not a feature on this PCB.

The right shift can be split yes, that is part of the HHKB layout.

Have a nice day :)

LeandreN,
Thanks for the detail info
Meaning, if i want arrow keys, i just need to source different PCB.
I think this run with reduced and affordable price will attract more people. Good luck.
Cheers

Offline OliveOil

  • Posts: 1
Re: [GB] Klippe R3 Pre-Order
« Reply #18 on: Fri, 25 October 2019, 20:48:44 »
Hey, im new to the whole keeb community and GBs. Is it still too late to order a Klippe R3??

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12275
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Klippe R3 Pre-Order
« Reply #19 on: Fri, 25 October 2019, 20:50:58 »
Hey, im new to the whole keeb community and GBs. Is it still too late to order a Klippe R3??

yes
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #20 on: Fri, 08 November 2019, 05:10:35 »



Shipping :)

Offline regionfree

  • Posts: 319
  • Location: Sa kagubatan
Re: [GB] Klippe R3 Pre-Order
« Reply #21 on: Fri, 08 November 2019, 08:45:32 »
LeandreN, nothing is available on the website. Will there be extras?

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #22 on: Fri, 08 November 2019, 17:55:03 »
LeandreN, nothing is available on the website. Will there be extras?

There will probably be a few extras, but a US vendor might have more available, and before.

Offline cigs_coffee

  • Posts: 38
Re: [GB] Klippe R3 Pre-Order
« Reply #23 on: Fri, 08 November 2019, 18:56:19 »
. [ups, wrong thread  :-\]
« Last Edit: Fri, 08 November 2019, 19:04:26 by cigs_coffee »

Offline chriszhu

  • Posts: 128
  • Location: Toronto
  • (* ̄(エ) ̄*)''
Re: [GB] Klippe R3 Pre-Order
« Reply #24 on: Fri, 08 November 2019, 19:22:49 »
LeandreN, nothing is available on the website. Will there be extras?

There will probably be a few extras, but a US vendor might have more available, and before.

Who is the US vendor?

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #25 on: Tue, 12 November 2019, 01:38:43 »
LeandreN, nothing is available on the website. Will there be extras?

There will probably be a few extras, but a US vendor might have more available, and before.

Who is the US vendor?


1upkeyboards.com

Offline LeandreN

  • Mekanisk.co
  • * Vendor
  • Thread Starter
  • Posts: 2936
  • Location: ISO
    • Mekanisk
Re: [GB] Klippe R3 Pre-Order
« Reply #26 on: Tue, 12 November 2019, 01:40:14 »
Hello!
Quite a few Klippe R3 orders was shipped the last few days :)

I except shipping to be finished well before the end of November, but there might be some delays if some cases need to be reanodized etc.

Thank you for your patience.

Offline Zeelobby

  • Posts: 926
Re: [GB] Klippe R3 Pre-Order
« Reply #27 on: Fri, 31 January 2020, 18:53:57 »
Hello!
Quite a few Klippe R3 orders was shipped the last few days :)

I except shipping to be finished well before the end of November, but there might be some delays if some cases need to be reanodized etc.

Thank you for your patience.
Are there any extras from R3?

Offline dwarflemur

  • Posts: 166
  • Location: cali
Re: [GB] Klippe R3 Pre-Order
« Reply #28 on: Fri, 31 January 2020, 23:41:04 »
Hello!
Quite a few Klippe R3 orders was shipped the last few days :)

I except shipping to be finished well before the end of November, but there might be some delays if some cases need to be reanodized etc.

Thank you for your patience.
Are there any extras from R3?

https://www.1upkeyboards.com/shop/bases-and-cases/aluminum-base/mekanisk-klippe-r3-high-profile-case/
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline Zeelobby

  • Posts: 926
Re: [GB] Klippe R3 Pre-Order
« Reply #29 on: Sat, 01 February 2020, 07:19:01 »
Hello!
Quite a few Klippe R3 orders was shipped the last few days :)

I except shipping to be finished well before the end of November, but there might be some delays if some cases need to be reanodized etc.

Thank you for your patience.
Are there any extras from R3?

https://www.1upkeyboards.com/shop/bases-and-cases/aluminum-base/mekanisk-klippe-r3-high-profile-case/
Thanks! Dunno how I missed this.