Author Topic: [IC] Orbit-X: Compact Split Ergonomic Keyboard - Pending sale (Read 50059 times)

ai03 · « **on:** Wed, 01 January 2020, 08:18:21 »

Orbit-X
Ergonomic keyboard by ai03
Latest update here

Small board, bold design. Orbit-X unites a comfortable ergonomic layout with a high-end CNC-milled case to create a luxurious experience that’s easy to learn and enjoyable to use.

Ready By Design

An unusual layout can be daunting to use, especially if coming from something very different.
Orbit-X has been designed specifically to be easy to migrate to, regardless of what your current layout preferences are.

Typical modifier key placements means your fingers move where they should.
A carefully devised layout makes use of symmetric key placements to keep layout memorization to an absolute minimum while offering functionality comparable to a board as large as a TKL.

Tailored to You

The Orbit-X layout packs in function as close to the home position as possible to minimize finger movement.
The bottom row modifiers allow for easy migration from typical keyboard layouts, and the thumb cluster is reduced to two keys to reduce thumb strain as much as possible.
A top-mounted polycarbonate plate matches the layout with the typing comfort required.

The case is designed with light-catching curves that adorn the front and rear, paired with strong straight sides that give the tiny board a daring look well beyond its size.
The "screwless" internal screw design hides all screws out of sight once assembled, leaving the curvatures unbroken even on the bottom.
A specially designed polycarbonate wristrest matches the Orbit-X’s aesthetic perfectly while supporting your wrists for the most demanding typing sessions.

The do-everything keyboard

Just as the layout is tailored to the hand, the entire board can be tailored to your preferences.
Leave the supplied foam layer out for the extreme flex and typing comfort of a top-mounted polycarbonate plate, or drop it in to obtain maximized acoustics rare for a board of this size.

Both halves have a USB-C connector, so you can pick which one to use based on which is convenient for your cable.
The wristrests can be placed in front of the board for extended typing sessions, or removed to maximize desk estate.
If you only need one hand’s worth of keys for a task, you can plug in only one half of Orbit-X and extend available desk space even further.

Specifications
Case: Aluminum, likely grey and black, custom cut sub-PCB foam included
Plate: Polycarbonate, top mount
PCB: Soldered switches (non-hotswap)
Wristrests: Polycarbonate
Note: Polycarbonate is prone to visual damage due to its soft finish. The wristrest will pick up wear and tear over time.
Connections: USB-C to PC, 3.5mm TRRS between halves
Case Mass: ~350g per half, ~700g both halves, ~1kg with wristrests

Layout and Default Keymap:

Units: Around 100 total
Price: To be announced
Vendors: To be announced

Depending on response to the IC and other factors, the board may skip group buying and go straight to production for in-stock sale.
For faster updates and push notifications regarding this project, please join my Discord server here, then run the command .iam Orbit-X in the #bot-spam channel.

ai03 · « **Reply #1 on:** Wed, 01 January 2020, 08:18:40 »

Reserved

yui_ · « **Reply #2 on:** Wed, 01 January 2020, 08:23:10 »

The symmetric punctuation keys is super interesting to me - I have to try this now on my corne !

Vireca · « **Reply #3 on:** Wed, 01 January 2020, 08:25:21 »

Interested if you can make it an stock item

ai03 · « **Reply #4 on:** Wed, 01 January 2020, 08:42:34 »

Quote from: Vireca on Wed, 01 January 2020, 08:25:21

Interested if you can make it an stock item

Depending on demand here at this IC, on the Discord server, and in various other communities, there is a strong chance that it may happen.
(Also because I'm sick and tired from many of my recent GBs having issues one way or another)

zekth · « **Reply #5 on:** Wed, 01 January 2020, 08:48:00 »

Since i've seen the pictures on insta i'm really interested. I like the fact your choose TRRS for linking both sides, give a lot of customization possibilities.

Darth_munkee · « **Reply #6 on:** Wed, 01 January 2020, 08:49:27 »

Shut up and take my money

Sent from my LM-V350 using Tapatalk

phunktional · « **Reply #7 on:** Wed, 01 January 2020, 09:10:33 »

I've been waiting for this. Very excited!!

mrkantz · « **Reply #8 on:** Wed, 01 January 2020, 09:16:43 »

I've been regretting selling my ergodox a couple years back, I think this will be it's replacement

Slash Emperor · « **Reply #9 on:** Wed, 01 January 2020, 09:47:08 »

Not normally one for ergosplit boards, but this has me super interested and excited.

Sent from my Pixel 3 XL using Tapatalk

equalunique · « **Reply #10 on:** Wed, 01 January 2020, 10:19:52 »

Last night I saw these PCBs for sale on SpaceCat Designs. They look really intriguing, but I don't have the equipment or SMD soldering experience necessary to assemble. Interested!

Sent from my Ono-Sendai Cyberspace 7 using Tapatalk

Robosculpts · « **Reply #11 on:** Wed, 01 January 2020, 10:22:00 »

Oh man that case looks rad!

Rayndalf · « **Reply #12 on:** Wed, 01 January 2020, 12:05:54 »

So are both colored keys spacebar and backspace is the top right key? I know its reprogrammable, but thats unusual, I would expect one if the spacebars to be (back)space.

Vireca · « **Reply #13 on:** Wed, 01 January 2020, 12:12:27 »

Quote from: ai03 on Wed, 01 January 2020, 08:42:34

Quote from: Vireca on Wed, 01 January 2020, 08:25:21
Interested if you can make it an stock item

Depending on demand here at this IC, on the Discord server, and in various other communities, there is a strong chance that it may happen.
(Also because I'm sick and tired from many of my recent GBs having issues one way or another)

Perfect, stock Vega too

nasp · « **Reply #14 on:** Wed, 01 January 2020, 12:20:32 »

What's the angle of the board? I didn't see it listed.

Macmutant · « **Reply #15 on:** Wed, 01 January 2020, 12:21:36 »

Been waiting for this one. Very interested.

Kokaloo · « **Reply #16 on:** Wed, 01 January 2020, 12:46:25 »

Got to mess with this a bit at socal, soooooo excited.

Get ready for everybody who never wanted to try a corne/ergodash to want in lmaoooo
If I could suggest anything it would maybe be some tenting capabilities of some sort? I'm sure you've thought of it before and I'm curious what you think about it!

naked_and_jameson · « **Reply #17 on:** Wed, 01 January 2020, 16:41:16 »

Why choose TRRS over USB-C for interlink?

Rayndalf · « **Reply #18 on:** Wed, 01 January 2020, 16:47:38 »

Quote from: naked_and_jameson on Wed, 01 January 2020, 16:41:16

Why choose TRRS over USB-C for interlink?

Might directly connect the matrices instead of connecting two USB devices. That or the connector is smaller and can be rotated without unplugging it.

belgium_waffles · « **Reply #19 on:** Wed, 01 January 2020, 16:48:04 »

I like.

naked_and_jameson · « **Reply #20 on:** Wed, 01 January 2020, 17:20:15 »

Quote from: Rayndalf on Wed, 01 January 2020, 16:47:38

Quote from: naked_and_jameson on Wed, 01 January 2020, 16:41:16
Why choose TRRS over USB-C for interlink?

Might directly connect the matrices instead of connecting two USB devices. That or the connector is smaller and can be rotated without unplugging it.

Either way, USB-C or TRRS, the connectors and conductors are 4 wires connecting two PCBs together. Makes no difference on matrices. Issue with TRRS is you're shorting the pins against each other when you plug in or unplug. I recently built a Sol2 that uses USB-C interconnect and it's great.

atfltr · « **Reply #21 on:** Wed, 01 January 2020, 18:54:16 »

I like the layout a lot. Any plans to have PCB available separately?

ai03 · « **Reply #22 on:** Wed, 01 January 2020, 19:45:17 »

Quote from: naked_and_jameson on Wed, 01 January 2020, 16:41:16

Why choose TRRS over USB-C for interlink?

So people don't blow up their OrbitXs by plugging in the USB cable from the computer into the interlink port.

Quote from: Kokaloo on Wed, 01 January 2020, 12:46:25

If I could suggest anything it would maybe be some tenting capabilities of some sort? I'm sure you've thought of it before and I'm curious what you think about it!

I might ready data for some 3D printed blocks for the board to rest on to provide the tenting.

Quote from: nasp on Wed, 01 January 2020, 12:20:32

What's the angle of the board? I didn't see it listed.

7 degrees.

Quote from: Rayndalf on Wed, 01 January 2020, 12:05:54

So are both colored keys spacebar and backspace is the top right key? I know its reprogrammable, but thats unusual, I would expect one if the spacebars to be (back)space.

Both of the large thumb keys are bound to space by default to make migration/learning easy when coming from typical long-spacebar layouts. Of course, it is possible to change the layout to something you prefer.

Quote from: atfltr on Wed, 01 January 2020, 18:54:16

I like the layout a lot. Any plans to have PCB available separately?

I will be open-sourcing (or already did, I forget) the PCB in the future.

Edit: I think this is the latest copy, but there's always the chance I left some commits unuploaded, so proceed at your own risk for the time being.
https://github.com/ai03-2725/Orbit/tree/master/OrbitX-PCB

equalunique · « **Reply #23 on:** Wed, 01 January 2020, 20:24:38 »

Quote from: atfltr on Wed, 01 January 2020, 18:54:16

I like the layout a lot. Any plans to have PCB available separately?

See here: https://spacecat.design/collections/pcbs-cases-kits/products/orbit-pcb-sets-mx-choc

Sent from my Ono-Sendai Cyberspace 7 using Tapatalk

jrs · « **Reply #24 on:** Wed, 01 January 2020, 20:58:29 »

Quote from: equalunique on Wed, 01 January 2020, 20:24:38

Quote from: atfltr on Wed, 01 January 2020, 18:54:16
I like the layout a lot. Any plans to have PCB available separately?
See here: https://spacecat.design/collections/pcbs-cases-kits/products/orbit-pcb-sets-mx-choc

Sent from my Ono-Sendai Cyberspace 7 using Tapatalk

That's for the regular Orbit, not the Orbit-X.

equalunique · « **Reply #25 on:** Wed, 01 January 2020, 21:01:58 »

Quote from: jrs on Wed, 01 January 2020, 20:58:29

Quote from: equalunique on Wed, 01 January 2020, 20:24:38
Quote from: atfltr on Wed, 01 January 2020, 18:54:16
I like the layout a lot. Any plans to have PCB available separately?
See here: https://spacecat.design/collections/pcbs-cases-kits/products/orbit-pcb-sets-mx-choc

Sent from my Ono-Sendai Cyberspace 7 using Tapatalk
That's for the regular Orbit, not the Orbit-X.

Ooohhh

Sent from my Ono-Sendai Cyberspace 7 using Tapatalk

Zilleon · « **Reply #26 on:** Wed, 01 January 2020, 21:50:45 »

I'm extremely interested in this board, have been following it as closely as possible, really hope I can get one

Sent from my Pixel 4 XL using Tapatalk

PocketAces · « **Reply #27 on:** Thu, 02 January 2020, 13:19:21 »

Wow this is sexy.

Sent from my iPhone using Tapatalk

DALExSNAIL · « **Reply #28 on:** Thu, 02 January 2020, 13:25:52 »

Is the foam layer cut by you in house, or is that something being produced custom?

ai03 · « **Reply #29 on:** Thu, 02 January 2020, 19:30:54 »

Quote from: DALExSNAIL on Thu, 02 January 2020, 13:25:52

Is the foam layer cut by you in house, or is that something being produced custom?

Custom-cut at the factory.

stoffelduss · « **Reply #30 on:** Thu, 02 January 2020, 19:43:47 »

Cooool! Interested to see what the price will be.

astronavy · « **Reply #31 on:** Thu, 02 January 2020, 22:16:11 »

i’m interested. what is projected timeline for this group buy?

Gonsterek · « **Reply #32 on:** Fri, 03 January 2020, 11:42:17 »

interested, but it depends on price

ai03 · « **Reply #33 on:** Fri, 03 January 2020, 21:58:37 »

Quote from: astronavy on Thu, 02 January 2020, 22:16:11

i’m interested. what is projected timeline for this group buy?

Based on the feedback so far at Geekhack and Discord, it's likely that I may just start production of a few units sooner or later.

Quote from: Gonsterek on Fri, 03 January 2020, 11:42:17

interested, but it depends on price

The price tag likely won't amaze you, for it's basically two top mounted customs, one per hand.

jrs · « **Reply #34 on:** Sat, 04 January 2020, 01:02:15 »

It's a shame that this isn't gasket mounted, like the GSKT-00.

befbef · « **Reply #35 on:** Sat, 04 January 2020, 04:10:43 »

Quote from: jrs on Sat, 04 January 2020, 01:02:15

It's a shame that this isn't gasket mounted, like the GSKT-00.

What do you expect from gaskets for this board other than gasket mount is hip?

zekkin · « **Reply #36 on:** Sat, 04 January 2020, 05:43:11 »

Quote from: jrs on Sat, 04 January 2020, 01:02:15

It's a shame that this isn't gasket mounted, like the GSKT-00.

Given how the "gasket" works in GSKT, it would likely not be functional in this form factor.

lookid · « **Reply #37 on:** Sat, 04 January 2020, 16:11:38 »

at this moment Orbit-X, I think, best split-ergo board I've ever seen
flat design, human ergonomic (especially for thumb) and aesthetic case

Very interested.

ehagerty · « **Reply #38 on:** Sun, 05 January 2020, 23:55:19 »

I need another keyboard like a hole in the head - but I MUST have this beauty! 😊

Blissofbeing · « **Reply #39 on:** Mon, 06 January 2020, 22:25:30 »

Very interested, will insta buy as soon as available.

KingOfMemes · « **Reply #40 on:** Mon, 06 January 2020, 22:39:45 »

You are killing it with the polaris and the equinox. Count me in for this one too

SoraNoTenshi · « **Reply #41 on:** Tue, 07 January 2020, 03:11:21 »

I am highly considering it, the problem for me is even the loss of the num-row, which may be not so pleasantly to use for the purpose i intend of using this keyboard.

manolodeinternet · « **Reply #42 on:** Tue, 07 January 2020, 11:48:57 »

Super Cool keeb !!!

1) Does it wear ProMicros ?

2) Can this keyboard be configured through QMK ?

;-)

sinnyc · « **Reply #43 on:** Wed, 08 January 2020, 07:37:31 »

Are you going to produce the Orbit (not the Orbit-X) or have you already done that and I missed it? I think the Orbit-X is beautiful but I prefer 5 x keyboards like the Ergodash and Iris and the Orbit looks like a beautiful option for that form factor.

wil · « **Reply #44 on:** Wed, 08 January 2020, 10:04:05 »

very very interested!

wangledorf · « **Reply #45 on:** Wed, 08 January 2020, 11:59:15 »

Not enough keys for me personally but that's a really pretty design!

I feel like this is perfect for Planck users that want something a bit more ergonomic.

gelmera · « **Reply #46 on:** Thu, 09 January 2020, 20:03:53 »

this looks great count me in.

snowkuma · « **Reply #47 on:** Fri, 10 January 2020, 00:21:18 »

This looks great, I'm in!

ai03 · « **Reply #48 on:** Thu, 16 January 2020, 03:26:27 »

Quote from: sinnyc on Wed, 08 January 2020, 07:37:31

Are you going to produce the Orbit (not the Orbit-X) or have you already done that and I missed it?

It started GB around 1.5 years ago, and I'm guilty of still not having finished it (on third manufacturing attempt after the first two factories gave out).
The regular Orbit will ship to the buyers before OrbitX goes on sale.

Quote from: manolodeinternet on Tue, 07 January 2020, 11:48:57

1) Does it wear ProMicros ?
2) Can this keyboard be configured through QMK ?

1) No; it uses pre-soldered on-board MCUs.
2) Yes. The current prototype I've been using as a daily driver is working fine with QMK so far.

Also, some good news:
Based on general feedback, this board seems to have enough interest that I can avoid the pain of GB and jump straight to manufacturing as an in-stock item whenever it's ready.
I have begun preparing for the process, but it will be after CNY before it is ready, since just about every factory is closing for the holidays.

ehagerty · « **Reply #49 on:** Thu, 16 January 2020, 05:20:17 »

Great news! Forgive the noob question, but when you say it will become a general stock item, do you mean something in the next few months?

sinnyc · « **Reply #50 on:** Thu, 16 January 2020, 09:42:15 »

Quote from: ai03 on Thu, 16 January 2020, 03:26:27

Quote from: sinnyc on Wed, 08 January 2020, 07:37:31
Are you going to produce the Orbit (not the Orbit-X) or have you already done that and I missed it?
It started GB around 1.5 years ago, and I'm guilty of still not having finished it (on third manufacturing attempt after the first two factories gave out).
The regular Orbit will ship to the buyers before OrbitX goes on sale.

Heheheh, no worries. The Orbit looks beautiful so I am sure the X will be worth the wait. You can add my name to the IC for the Orbit-X for sure.

ai03 · « **Reply #51 on:** Fri, 17 January 2020, 00:04:34 »

Quote from: ehagerty on Thu, 16 January 2020, 05:20:17

Great news! Forgive the noob question, but when you say it will become a general stock item, do you mean something in the next few months?

Likely yes. About to send in the case production order, although it won't be able to ship before stuff like PCBs, packaging, and such are also readied.

Coumbaya · « **Reply #52 on:** Mon, 20 January 2020, 01:45:19 »

Well, I'm on the market for a full metal 40% so I hope this comes out

ai03 · « **Reply #53 on:** Sun, 08 March 2020, 18:36:16 »

Sent in the case order since there seems to be enough demand to run it as in-stock.
Will be ordering the rest (packaging, PCBs, misc) later.

ehagerty · « **Reply #54 on:** Sun, 08 March 2020, 20:47:55 »

Awesome! Thank you for the update!

takehiro · « **Reply #55 on:** Mon, 09 March 2020, 11:27:32 »

damn cant wait!

i luv chuletas · « **Reply #56 on:** Sat, 14 March 2020, 15:50:04 »

Damn, this one is moving pretty fast! Will def keep an eye out for it.

The thumb keys are 1.25's, correct?

ai03 · « **Reply #57 on:** Mon, 30 March 2020, 04:28:47 »

Cases slated to finish up production late April.
Currently finalizing PCB data, packaging data, and accessories orders.

Once everything is ready and packed, the board will go on sale at Deskeys.

hottrout · « **Reply #58 on:** Mon, 30 March 2020, 04:39:34 »

This has moved along quickly, interested as my 1st split ergo board.

KBDoods · « **Reply #59 on:** Wed, 29 April 2020, 19:41:15 »

Looking forward to this one!

Sent from my iPhone using Tapatalk

oldcat · « **Reply #60 on:** Wed, 29 April 2020, 19:50:07 »

Quote from: ai03 on Mon, 30 March 2020, 04:28:47

Cases slated to finish up production late April.
Currently finalizing PCB data, packaging data, and accessories orders.

Once everything is ready and packed, the board will go on sale at Deskeys.

Wow.

ai03 · « **Reply #61 on:** Thu, 21 May 2020, 11:06:16 »

Case production has been delayed from original ETA, and is currently getting close to finishing up.
I still need to prepare PCBs and packaging and such, which will be ordered as soon as I can get production data finalized.

The other limiting factor is the GB for the original fullsize Orbit, which is getting dangerously close to two years since starting. I refuse to do the unethical and ship a derivative design before the original ships, so Orbit-X will only ship after the regular Orbit orders have all been shipped.

hottrout · « **Reply #62 on:** Fri, 22 May 2020, 05:15:29 »

I am waiting for the start. Keep calm and carry on.

FezBoy · « **Reply #63 on:** Thu, 28 May 2020, 21:50:44 »

My body is ready.

My wallet is not

FunBox · « **Reply #64 on:** Fri, 05 June 2020, 16:24:25 »

I'm glad I found this. I've been wanting an premium ergosplit since I first discovered this hobby! This is a just have for me

Sent from my SM-N975U1 using Tapatalk

econeuler · « **Reply #65 on:** Sat, 06 June 2020, 15:32:45 »

Wow, nice! Would love to try this out

i luv chuletas · « **Reply #66 on:** Sat, 20 June 2020, 22:59:02 »

Any updates on this, by chance?

ai03 · « **Reply #67 on:** Thu, 16 July 2020, 05:44:10 »

Quote from: i luv chuletas on Sat, 20 June 2020, 22:59:02

Any updates on this, by chance?

The PCB sample is set to arrive from the factory very soon for final verification prior to mass production.

hottrout · « **Reply #68 on:** Thu, 16 July 2020, 07:08:00 »

Nice, looking forward.

ai03 · « **Reply #69 on:** Sun, 19 July 2020, 01:43:27 »

PCB production samples have arrived.

Mistah · « **Reply #70 on:** Sat, 20 February 2021, 01:24:16 »

Are there any updates on this or for the regular Orbit?

Edit: as far is critique goes, would a 1u key fit in the 1.5u space area and look good? There aren't any convex 1.5u keycaps in most popular sets unfortunately. The way it's currently laid out, it's kind of difficult to cover properly. 2U would allow for easy coverage with numpad keys, or convex 2U keycaps as well.

hottrout · « **Reply #71 on:** Sat, 20 February 2021, 04:48:55 »

Are we alive and running again. If we are this is cool.

DeMechanica · « **Reply #72 on:** Sat, 20 February 2021, 17:19:25 »

This is exactly the layout that’ll get me into split keyboards. I’m hyped!

KucherenkoZZZ · « **Reply #73 on:** Sun, 21 February 2021, 11:01:04 »

Finally the first split that i liked

HappyB0T · « **Reply #74 on:** Wed, 24 February 2021, 22:59:34 »

Quote from: KucherenkoZZZ on Sun, 21 February 2021, 11:01:04

Finally the first split that i liked

+1 Well Done!

Xury46 · « **Reply #75 on:** Tue, 30 March 2021, 16:05:53 »

Wow this looks so clean. I love the slight wave to the design of the housing, it makes me think of the Windows XP logo.

Kokaloo · « **Reply #76 on:** Tue, 30 March 2021, 16:19:41 »

pls stop bumping this my heart can't take it anymore

TeacherGeek · « **Reply #77 on:** Wed, 21 April 2021, 16:14:16 »

Any alps support on this one?

ambulated · « **Reply #78 on:** Wed, 21 April 2021, 17:55:33 »

So excited about this, I've been keeping an eye on it for a while! Hoping the competition won't be too brutal haha

Mwbowman · « **Reply #79 on:** Wed, 19 May 2021, 22:38:32 »

I really want to buy this but i haven’t been able to find a single set that includes convex 1.5u space bar. Really discouraging 🥲.

Sent from my iPhone using Tapatalk

psxndc · « **Reply #80 on:** Wed, 19 May 2021, 22:53:56 »

Quote from: Mwbowman on Wed, 19 May 2021, 22:38:32

I really want to buy this but i haven’t been able to find a single set that includes convex 1.5u space bar. Really discouraging 🥲.

Sent from my iPhone using Tapatalk

A fair amount of sets have a pair of 1.5u space bars. KAT drifter was the first set I checked and it has a pair in the 40s/ortho kit. KAT milkshake too.

Granted, you’ve probably missed the boat on those, but KATlantis is still being made, it has a pair in the ortho kit, and I’m sure extras will be up once the GB orders ship.

hottrout · « **Reply #81 on:** Thu, 20 May 2021, 03:35:41 »

So excited to see this become available. Can't wait.

FamDK · « **Reply #82 on:** Thu, 20 May 2021, 09:43:29 »

Looking awesome

ai03 · « **Reply #83 on:** Sun, 15 May 2022, 15:56:40 »

Sorry for the long silence - with so much happening both in my life and around the globe, this project had been put on the backlog to prioritize other things.

All units have been produced and have been sitting around awaiting sale (for too long) - the plan is to have them go on sale once TypePlus finally has the capacity to handle them when the Vega group buy completes.
Once there's a firm date set, I'll report back here and on Discord.

herbologist · « **Reply #84 on:** Sun, 15 May 2022, 16:09:22 »

Quote from: ai03 on Sun, 15 May 2022, 15:56:40

Sorry for the long silence - with so much happening both in my life and around the globe, this project had been put on the backlog to prioritize other things.

All units have been produced and have been sitting around awaiting sale (for too long) - the plan is to have them go on sale once TypePlus finally has the capacity to handle them when the Vega group buy completes.
Once there's a firm date set, I'll report back here and on Discord.

Pog

Kokaloo · « **Reply #85 on:** Sun, 15 May 2022, 18:06:21 »

Quote from: ai03 on Sun, 15 May 2022, 15:56:40

Sorry for the long silence - with so much happening both in my life and around the globe, this project had been put on the backlog to prioritize other things.

All units have been produced and have been sitting around awaiting sale (for too long) - the plan is to have them go on sale once TypePlus finally has the capacity to handle them when the Vega group buy completes.
Once there's a firm date set, I'll report back here and on Discord.

wait woah what

gunchi · « **Reply #86 on:** Sun, 15 May 2022, 18:09:02 »

Quote from: ai03 on Sun, 15 May 2022, 15:56:40

Sorry for the long silence - with so much happening both in my life and around the globe, this project had been put on the backlog to prioritize other things.

All units have been produced and have been sitting around awaiting sale (for too long) - the plan is to have them go on sale once TypePlus finally has the capacity to handle them when the Vega group buy completes.
Once there's a firm date set, I'll report back here and on Discord.

looking forward, thanks for the update

Zeelobby · « **Reply #87 on:** Sun, 15 May 2022, 18:13:31 »

Quote from: ai03 on Sun, 15 May 2022, 15:56:40

Sorry for the long silence - with so much happening both in my life and around the globe, this project had been put on the backlog to prioritize other things.

All units have been produced and have been sitting around awaiting sale (for too long) - the plan is to have them go on sale once TypePlus finally has the capacity to handle them when the Vega group buy completes.
Once there's a firm date set, I'll report back here and on Discord.

Damn. Let's go! Cool that they're done.

Sent from my Pixel 3 XL using Tapatalk

News:

Author Topic: [IC] Orbit-X: Compact Split Ergonomic Keyboard - Pending sale (Read 50059 times)