[GB] Fox-orange 80% Custom TKL (GB Closed | All shipped | Collecting Feedbacks)

[senter]

I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Solder all the switches with the type as your demand. Install all the stabilizers. You'll only need to install your keycaps after our assembling.

[senter]

If I want to order 2 full kits, do I just fill out the form a second time?

Yes, please also leave a message in the second order that it's not filled by mistake.

[eksuen]

If I want to order 2 full kits, do I just fill out the form a second time?

Yes, please also leave a message in the second order that it's not filled by mistake.

Understood. Thanks. Now to decide on colors and the like... )

[JDragon]

So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice 

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising 

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the black glossy?

Yes, all the cases except the white one will be glossy but only a little.

Thank you!

Will the brass weight be coated to prevent tarnishing?

[sunchained]

Hello,

My first post in GeekHack actually! I'm really interested in ordering this board, it's so beautiful. I am still deciding which color I should choose. I have a question about the assembly option. I see you answered another poster's question about soldering the switches and installing stabilizers. My question is: must buyer provide the switches, or some stock will be provided? What switches will be available?

And a question about switch top removal option, this will allow me to change the switches installed in my board without desoldering?

Thanks so much.

[Pedicabo_Irrumabo]

I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Solder all the switches with the type as your demand. Install all the stabilizers. You'll only need to install your keycaps after our assembling.

How does switch selection work? Do I just tell you and you source them and I pay the extra cost?

[senter]

Hello,

My first post in GeekHack actually! I'm really interested in ordering this board, it's so beautiful. I am still deciding which color I should choose. I have a question about the assembly option. I see you answered another poster's question about soldering the switches and installing stabilizers. My question is: must buyer provide the switches, or some stock will be provided? What switches will be available?

And a question about switch top removal option, this will allow me to change the switches installed in my board without desoldering?

Thanks so much.

We can provide normal switches like Gateron or Cherry MX switches. Which type do you want to use? You can PM me for details.

For switch top removable option, check the information here: http://builder-docs.swillkb.com/features/#switch-type

You will also need some tools like this: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1363

[senter]

I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Solder all the switches with the type as your demand. Install all the stabilizers. You'll only need to install your keycaps after our assembling.

How does switch selection work? Do I just tell you and you source them and I pay the extra cost?

You can Pm me your selection or leave a message when you fill in the form
We will invoice you the kit price + switch cost + reasonable assembling fee

[senter]

So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice 

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising 

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the black glossy?

Yes, all the cases except the white one will be glossy but only a little.

Thank you!

Will the brass weight be coated to prevent tarnishing?

Good question.

Yes, the brass weight will be nickel plated. Here is the sample photo.

[senter]

I like the curves of the keyboard, it kind of reminds me of a "larger" ducky mini lol!

Thank you 

[nurupism]

Will the PCB support switch LED lighting? And do you have a photo of the PCB at all?

[Pedicabo_Irrumabo]

What kind of cable will this use?

[senter]

Will the PCB support switch LED lighting? And do you have a photo of the PCB at all?

Yea it support switch lighting .i will update pcb later

[senter]

What kind of cable will this use?

Detachable cable

[Pedicabo_Irrumabo]

I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Solder all the switches with the type as your demand. Install all the stabilizers. You'll only need to install your keycaps after our assembling.

How does switch selection work? Do I just tell you and you source them and I pay the extra cost?

You can Pm me your selection or leave a message when you fill in the form
We will invoice you the kit price + switch cost + reasonable assembling fee

PM'd

[senter]

I'm new at building keyboards, so please excuse my ignorance. What would the assemble service include?

Solder all the switches with the type as your demand. Install all the stabilizers. You'll only need to install your keycaps after our assembling.

How does switch selection work? Do I just tell you and you source them and I pay the extra cost?

You can Pm me your selection or leave a message when you fill in the form
We will invoice you the kit price + switch cost + reasonable assembling fee

PM'd

Replied

[senter]

Can't wait anymore

[JDragon]

So beautiful, I love how it's so sleek! Reminds me of my iphone! Nice 

Not sure if this was asked already, will there be more prototypes showing a few more colours (of the outer casing at least)?
I'm not too good with visualising 

Someone mentioned images of the case with keycaps -- that'll be great too.

We've only made 4 prototypes.

http://imgur.com/09E08mh Here are the photos for grey, black, and white

We also updates some photos of renders for different colors in the post

Is the black glossy?

Yes, all the cases except the white one will be glossy but only a little.

Thank you!

Will the brass weight be coated to prevent tarnishing?

Good question.

Yes, the brass weight will be nickel plated. Here is the sample photo.

Thanks! I placed my order.

[pixelpusher]

Do you plan to show us a photo of the case without the gap in it before the GB ends?

[Latin00032]

Those pics of the ice on the case look cool and scary at the same time.

I wouldnt want water on my board.

How white will the anodized white look? Is it a greyish white?

Are there any comparison photos?

[Pedicabo_Irrumabo]

Sorry if this an obvious question, but what is the connector on the board for the cable?

[senter]

Do you plan to show us a photo of the case without the gap in it before the GB ends?

Sorry we're not going to make more prototypes. We can more renders if necessary though.

[senter]

Sorry if this an obvious question, but what is the connector on the board for the cable?

Mini-USB connector. We will attach a cable for free.

[senter]

Those pics of the ice on the case look cool and scary at the same time.

I wouldnt want water on my board.

How white will the anodized white look? Is it a greyish white?

Are there any comparison photos?

yes sir, check the photos here.

[pixelpusher]

Do you plan to show us a photo of the case without the gap in it before the GB ends?

Sorry we're not going to make more prototypes. We can more renders if necessary though.

So there will just be a small seam there instead of the gap? Or is it somehow seamless?

[senter]

Do you plan to show us a photo of the case without the gap in it before the GB ends?

Sorry we're not going to make more prototypes. We can more renders if necessary though.

So there will just be a small seam there instead of the gap? Or is it somehow seamless?

There will be a very small seam.

[senter]

If I want to order 2 full kits, do I just fill out the form a second time?

Yes, please also leave a message in the second order that it's not filled by mistake.

Understood. Thanks. Now to decide on colors and the like... )

[stealthbomb]

Will you assemble iso layout and ship to Sweden?

[Pedicabo_Irrumabo]

Order placed!

[xondat]

This board is really growing on me.

I know you're in group buy stage for this buy now, but still worth asking... Would you ever offer a angled board with normal winkeyless bottom row?

Good luck with the buy.

[senter]

Will you assemble iso layout and ship to Sweden?

Yes, but I don't know the shipping fee right now. You can fill in the form though.

Remember to leave a message for the requirements of the assembling (layout, switches)

[senter]

Order placed!

 

[senter]

This board is really growing on me.

I know you're in group buy stage for this buy now, but still worth asking... Would you ever offer a angled board with normal winkeyless bottom row?

Good luck with the buy.

Yes, angled board is what many other people asked and it's very likely we will make angled boards the next time, but that's just one simple feature.

Right now, we're considering what's next to make. We prefer to make something new that no one did before, including new materials, new features, new layouts, new concepts, and anything will make people say WOW!

[papa]

Five more days )

[senter]

Five more days )

Yeah. Only five days left.

[KetchyKech]

Hey , so I chose the Luxury gold color--any renders of this color? I also chose white for plate and weight ~ I may reverse the color choices depending ~ can you get me a render for Luxury gold color? thank you senter~~~

[senter]

The gold color is almost identical to the gold iphone 7. Sorry I'm not able to make renders currently.  It shouldn't be too hard to imagine what the gold case looks like.

[KetchyKech]

The gold color is almost identical to the gold iphone 7. Sorry I'm not able to make renders currently.  It shouldn't be too hard to imagine what the gold case looks like.

Awesome, I was hoping to hear that, thank you! Just in case I'd like to make a change to some of the colors, do we just PM you directly? or re-submit form ? ~ 

[senter]

The gold color is almost identical to the gold iphone 7. Sorry I'm not able to make renders currently.  It shouldn't be too hard to imagine what the gold case looks like.

Awesome, I was hoping to hear that, thank you! Just in case I'd like to make a change to some of the colors, do we just PM you directly? or re-submit form ? ~ 

You can PM me directly for the color change.

[Pedicabo_Irrumabo]

Is the assembly cost going to be billed separately from the rest?

[senter]

Is the assembly cost going to be billed separately from the rest?

Yes, we will send another invoice to you later

[JDragon]

Is there a way to check my order before I pay my invoice?

[senter]

Is there a way to check my order before I pay my invoice?

We will release the order info in one day or two.

[lovetree]

Made an order, but still dithering over colors. 

[senter]

Made an order, but still dithering over colors. 

It have time to choose

[JDragon]

Is there a way to check my order before I pay my invoice?

We will release the order info in one day or two.

Sounds good, will pay invoice once I double check (and also go through any last minute reconsidering of options).

[senter]

Is there a way to check my order before I pay my invoice?

We will release the order info in one day or two.

Sounds good, will pay invoice once I double check (and also go through any last minute reconsidering of options).

I've send you an email with the url to the order information. Please check your emails.

[JDragon]

Is there a way to check my order before I pay my invoice?

We will release the order info in one day or two.

Sounds good, will pay invoice once I double check (and also go through any last minute reconsidering of options).

I've send you an email with the url to the order information. Please check your emails.

Got it, thank you. Invoice paid 

[senter]

Is there a way to check my order before I pay my invoice?

We will release the order info in one day or two.

Sounds good, will pay invoice once I double check (and also go through any last minute reconsidering of options).

I've send you an email with the url to the order information. Please check your emails.

Got it, thank you. Invoice paid 

[kidcongo]

Well I'm in, very nice design, stands out from all the wedge shaped keyboards (which I do also like)...