Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1696728 times)

jdcarpe · « **Reply #3450 on:** Wed, 23 April 2014, 13:55:44 »

Quote from: 7bit on Wed, 23 April 2014, 13:44:58

WHERE ARE MY SWITCHES? DID YOU SHIP THEM YET?

Sent you a PM over at DT.

ApocalypseMaow · « **Reply #3451 on:** Wed, 23 April 2014, 14:09:20 »

Quote from: 7bit on Wed, 23 April 2014, 13:44:58

WHERE ARE MY SWITCHES? DID YOU SHIP THEM YET?

Fight me 1v1 bro!

whiskytango · « **Reply #3452 on:** Wed, 23 April 2014, 15:09:37 »

How I read that:

Matt3o · « **Reply #3453 on:** Thu, 24 April 2014, 09:39:57 »

Quote from: Jmneuv on Sun, 20 April 2014, 18:23:39

Could someone please update the first post with a summary of the current GB status? I've completely lost track where we are right now.

seconded. thanks

jdcarpe · « **Reply #3454 on:** Thu, 24 April 2014, 10:15:35 »

Quote from: Matt3o on Thu, 24 April 2014, 09:39:57

Quote from: Jmneuv on Sun, 20 April 2014, 18:23:39
Could someone please update the first post with a summary of the current GB status? I've completely lost track where we are right now.

seconded. thanks

Done.

SpAmRaY · « **Reply #3455 on:** Thu, 24 April 2014, 10:20:35 »

Komar said PCB's were being shipped to TJ at the end of March

Quote from: komar007 on Sat, 29 March 2014, 14:08:10

Okay guys, so a status update:
The PCBs have been produced and the US/Canada part is being shipped to tjcaustin. imsto's package is on its way too, directly from China.
The plates have been ordered, and they should take another week to finish production, according to ApocalypseMaow.

jdcarpe · « **Reply #3456 on:** Thu, 24 April 2014, 10:33:55 »

Quote from: SpAmRaY on Thu, 24 April 2014, 10:20:35

Komar said PCB's were being shipped to TJ at the end of March

Quote from: komar007 on Sat, 29 March 2014, 14:08:10
Okay guys, so a status update:
The PCBs have been produced and the US/Canada part is being shipped to tjcaustin. imsto's package is on its way too, directly from China.
The plates have been ordered, and they should take another week to finish production, according to ApocalypseMaow.

You're right. That's what he said. I haven't heard any status update since then. But maybe I'm out of the loop on that one.

nubbinator · « **Reply #3457 on:** Thu, 24 April 2014, 11:13:59 »

Quote from: SpAmRaY on Thu, 24 April 2014, 10:20:35

Komar said PCB's were being shipped to TJ at the end of March

Quote from: komar007 on Sat, 29 March 2014, 14:08:10
Okay guys, so a status update:
The PCBs have been produced and the US/Canada part is being shipped to tjcaustin. imsto's package is on its way too, directly from China.
The plates have been ordered, and they should take another week to finish production, according to ApocalypseMaow.

Based on that, it should be all produced and the prepping to ship stage then.

ApocalypseMaow · « **Reply #3458 on:** Thu, 24 April 2014, 14:16:01 »

Still waiting on plates here! I'll see if I can get another status update for you dudes.

abtrout · « **Reply #3459 on:** Wed, 30 April 2014, 19:56:27 »

gimme the ~~loot~~GH60s. gimme the ~~loot~~GH60s.

Matt3o · « **Reply #3460 on:** Thu, 01 May 2014, 02:16:41 »

since I had to get the left-overs I ended up with 2 poker plates. if anyone is willing to swap one plate, please let me know. thanks

BlueBär · « **Reply #3461 on:** Thu, 01 May 2014, 10:41:58 »

Quote from: Matt3o on Thu, 01 May 2014, 02:16:41

since I had to get the left-overs I ended up with 2 poker plates. if anyone is willing to swap one plate, please let me know. thanks

I can offer you a SamWiseKoy plate if you're interested.

tricheboars · « **Reply #3462 on:** Thu, 01 May 2014, 12:59:01 »

i have a silver beat poker plate i might trade for another plate with an interesting layout.

polarpigs · « **Reply #3463 on:** Thu, 01 May 2014, 23:15:17 »

How is the ETA looking? :/ My time in the States is running short..

CPTBadAss · « **Reply #3464 on:** Fri, 02 May 2014, 07:34:04 »

Quote from: Matt3o on Thu, 24 April 2014, 09:39:57

Quote from: Jmneuv on Sun, 20 April 2014, 18:23:39
Could someone please update the first post with a summary of the current GB status? I've completely lost track where we are right now.

seconded. thanks

I've also put this information in the Simple Questions thread's OP.

p3lim · « **Reply #3465 on:** Fri, 02 May 2014, 09:12:27 »

http://www.keyboard-layout-editor.com/#/layouts/d759a9ae71ff032062ee99f79e9fae81

Is this layout possible on the PCB? I've marked anything non-ANSI-standard on the legends.

Matt3o · « **Reply #3466 on:** Fri, 02 May 2014, 09:22:46 »

Quote from: BlueBär on Thu, 01 May 2014, 10:41:58

Quote from: Matt3o on Thu, 01 May 2014, 02:16:41
since I had to get the left-overs I ended up with 2 poker plates. if anyone is willing to swap one plate, please let me know. thanks

I can offer you a SamWiseKoy plate if you're interested.

the right shift would drive me crazy... but if I can't find anything else, well better than 2 poker

mashby · « **Reply #3467 on:** Fri, 02 May 2014, 10:20:45 »

Quote from: Matt3o on Fri, 02 May 2014, 09:22:46

Quote from: BlueBär on Thu, 01 May 2014, 10:41:58
Quote from: Matt3o on Thu, 01 May 2014, 02:16:41
since I had to get the left-overs I ended up with 2 poker plates. if anyone is willing to swap one plate, please let me know. thanks

I can offer you a SamWiseKoy plate if you're interested.

the right shift would drive me crazy... but if I can't find anything else, well better than 2 poker

Matt, I should have an extra Pure layout, if that's of any interest to you.

BlueBär · « **Reply #3468 on:** Fri, 02 May 2014, 12:06:00 »

Quote from: p3lim on Fri, 02 May 2014, 09:12:27

http://www.keyboard-layout-editor.com/#/layouts/d759a9ae71ff032062ee99f79e9fae81

Is this layout possible on the PCB? I've marked anything non-ANSI-standard on the legends.

Yes that should be possible if the stabilizers of the spacebar are in the correct positions.

Quote from: Matt3o on Fri, 02 May 2014, 09:22:46

the right shift would drive me crazy... but if I can't find anything else, well better than 2 poker

Yeah it's a pretty crazy layout which is why I don't really want it (picked up one of the leftover orders)

JBert · « **Reply #3469 on:** Sat, 03 May 2014, 08:40:42 »

Quote from: ApocalypseMaow on Thu, 24 April 2014, 14:16:01

Still waiting on plates here! I'll see if I can get another status update for you dudes.

Well, a week has passed. Any news on that update? I'm getting annoyed with my flaky Soarer-modded Poker...

Matt3o · « **Reply #3470 on:** Mon, 05 May 2014, 05:41:48 »

Quote from: mashby on Fri, 02 May 2014, 10:20:45

Quote from: Matt3o on Fri, 02 May 2014, 09:22:46
Quote from: BlueBär on Thu, 01 May 2014, 10:41:58
Quote from: Matt3o on Thu, 01 May 2014, 02:16:41
since I had to get the left-overs I ended up with 2 poker plates. if anyone is willing to swap one plate, please let me know. thanks

I can offer you a SamWiseKoy plate if you're interested.

the right shift would drive me crazy... but if I can't find anything else, well better than 2 poker

Matt, I should have an extra Pure layout, if that's of any interest to you.

The pure is lovely... if you are willing to ship to Italy. PM'd

ApocalypseMaow · « **Reply #3471 on:** Mon, 05 May 2014, 09:36:48 »

Quote from: JBert on Sat, 03 May 2014, 08:40:42

Quote from: ApocalypseMaow on Thu, 24 April 2014, 14:16:01
Still waiting on plates here! I'll see if I can get another status update for you dudes.
Well, a week has passed. Any news on that update? I'm getting annoyed with my flaky Soarer-modded Poker...

Still in production. :/
I hear you though. I'm ready to build one already!!!

Donbabbeo · « **Reply #3472 on:** Mon, 05 May 2014, 14:22:32 »

Just to know... are order closed already right?

SpAmRaY · « **Reply #3473 on:** Mon, 05 May 2014, 14:25:05 »

Quote from: Donbabbeo on Mon, 05 May 2014, 14:22:32

Just to know... are order closed already right?

yes

HannibalChew · « **Reply #3474 on:** Mon, 05 May 2014, 15:09:24 »

I've been completely out the loop lately and just remembered about this group buy. I can't wait!

Gondorff · « **Reply #3475 on:** Mon, 05 May 2014, 16:45:28 »

I just found out about this. Is there some way I can purchase one in the future?

HPE1000 · « **Reply #3476 on:** Mon, 05 May 2014, 16:46:50 »

Quote from: Gondorff on Mon, 05 May 2014, 16:45:28

I just found out about this. Is there some way I can purchase one in the future?

Either in the classifieds after everyone gets theirs, or hopefully from mechanicalkeyboards.com if they stock them.

ekw808 · « **Reply #3477 on:** Mon, 05 May 2014, 16:47:32 »

Once this gb is finished I'm sure you'll have a chance, just be patient.

Tarzan · « **Reply #3478 on:** Mon, 05 May 2014, 16:49:32 »

Quote from: Gondorff on Mon, 05 May 2014, 16:45:28

I just found out about this. Is there some way I can purchase one in the future?

I can guarantee there will be extra GH60 PCBs available in the Classifieds once they've been shipped.

ApocalypseMaow · « **Reply #3479 on:** Mon, 05 May 2014, 21:04:15 »

PLATES ARE DONE!!! JUST GOT THE EMAIL!!! Well, woke up to read my email. I should have all the PayPal stuff worked out tomorrow and will be delivering them in a week or so to TJ!

Pacifist · « **Reply #3480 on:** Mon, 05 May 2014, 21:08:27 »

yuiop · « **Reply #3481 on:** Mon, 05 May 2014, 22:25:11 »

Quote from: ApocalypseMaow on Mon, 05 May 2014, 21:04:15

PLATES ARE DONE!!! JUST GOT THE EMAIL!!! Well, woke up to read my email. I should have all the PayPal stuff worked out tomorrow and will be delivering them in a week or so to TJ!

best news ever

Matt3o · « **Reply #3482 on:** Tue, 06 May 2014, 11:15:11 »

my alu case is ready in all its anodized glory

GeorgeK · « **Reply #3483 on:** Tue, 06 May 2014, 15:25:23 »

Quote from: ApocalypseMaow on Mon, 05 May 2014, 21:04:15

PLATES ARE DONE!!! JUST GOT THE EMAIL!!! Well, woke up to read my email. I should have all the PayPal stuff worked out tomorrow and will be delivering them in a week or so to TJ!

Can I ask how it'll work from there? Will the EU plates then be sent to the EU proxy and then on to us with the PCBs?

(I realise you may not know the answer to this but one of the other organisers might

)

pix3l_fodder · « **Reply #3484 on:** Tue, 06 May 2014, 16:37:54 »

We ain't got no stabs yet do we? Another few months yet I feel.

Sifo · « **Reply #3485 on:** Tue, 06 May 2014, 16:40:38 »

I just want my single pcb T_T

/selfish /impatience

BlueBär · « **Reply #3486 on:** Tue, 06 May 2014, 16:49:07 »

Quote from: GeorgeK on Tue, 06 May 2014, 15:25:23

Can I ask how it'll work from there? Will the EU plates then be sent to the EU proxy and then on to us with the PCBs?

(I realise you may not know the answer to this but one of the other organisers might )

The boards still have to get assembled and yeah stabs are still missing (that was another part that should have been organized by WFD).

Tarzan · « **Reply #3487 on:** Tue, 06 May 2014, 16:51:29 »

Quote from: Sifo on Tue, 06 May 2014, 16:40:38

I just want my single pcb T_T

/selfish /impatience

Yarr. I don't think I ordered anything except PCBs...

SpAmRaY · « **Reply #3488 on:** Tue, 06 May 2014, 16:53:39 »

Quote from: Tarzan on Tue, 06 May 2014, 16:51:29

Quote from: Sifo on Tue, 06 May 2014, 16:40:38
I just want my single pcb T_T

/selfish /impatience

Yarr. I don't think I ordered anything except PCBs...

3 PCB's and a 10x Universal plate and 1 set of cherry plate mounted stabs according to the order confirmation in the first post.....UNLESS that isn't correct

Tarzan · « **Reply #3489 on:** Tue, 06 May 2014, 17:02:02 »

Quote from: SpAmRaY on Tue, 06 May 2014, 16:53:39

Quote from: Tarzan on Tue, 06 May 2014, 16:51:29
Quote from: Sifo on Tue, 06 May 2014, 16:40:38
I just want my single pcb T_T

/selfish /impatience

Yarr. I don't think I ordered anything except PCBs...

3 PCB's and a 10x Universal plate and 1 set of cherry plate mounted stabs according to the order confirmation in the first post.....UNLESS that isn't correct

Can I give away my stabilizers and just get the rest of my order? Please? P-p-p-please?

SpAmRaY · « **Reply #3490 on:** Tue, 06 May 2014, 17:03:20 »

I think there are a lot of us who would pass on stabilizers....I know I would I've got some already.

duq · « **Reply #3491 on:** Tue, 06 May 2014, 18:20:56 »

Sorry for asking again, but I needed to change my shipping address and I figured since final products are being shipped to distributors, I should figure out how to verify where things are really going .

So how do I change my address?

Tranquilite · « **Reply #3492 on:** Wed, 07 May 2014, 00:25:51 »

Quote from: Sifo on Tue, 06 May 2014, 16:40:38

I just want my single pcb T_T

/selfish /impatience

Matt3o · « **Reply #3493 on:** Wed, 07 May 2014, 01:09:19 »

Quote from: SpAmRaY on Tue, 06 May 2014, 17:03:20

I think there are a lot of us who would pass on stabilizers....I know I would I've got some already.

^ indeed!

GeorgeK · « **Reply #3494 on:** Wed, 07 May 2014, 03:01:24 »

I'm in a similar situation - I just ordered two PCBs and one plate knowing that I would source everything else myself (and have) and was hoping now that the plates and PCBs are produced that I could get my stuff sooner rather than later...

ApocalypseMaow · « **Reply #3495 on:** Wed, 07 May 2014, 05:33:39 »

As far as plates go. I still have to pick them up and get them to TJ in TX. After that, I wash my hands of it all!
Hopefully everything else falls into place from here.

Qipz · « **Reply #3496 on:** Wed, 07 May 2014, 15:44:14 »

Either way, many thanks ApocalypseMaow! You were a deus ex machina to us

ApocalypseMaow · « **Reply #3497 on:** Wed, 07 May 2014, 19:43:16 »

Quote from: Qipz on Wed, 07 May 2014, 15:44:14

Either way, many thanks ApocalypseMaow! You were a deus ex machina to us

I'm just stoked we will have GH60 soon™

nubbinator · « **Reply #3498 on:** Thu, 08 May 2014, 00:23:00 »

Here's an "I have no idea what I'm doing post" for those more technically inclined out there. While waiting on my GH60, I decided that I really want an Alps compatible one. So I was messing around trying to figure out KiCad, but got lost.

I made what should be an MX/Alps module for the PCB (files at this link titled MX1AAlps in the MX1A library), but have no idea how to populate it to the PCB layout or even if it would work. Anyone care to help a little?

Lubed Up Slug · « **Reply #3499 on:** Thu, 08 May 2014, 01:47:26 »

Is there ever going to be a round 2 on this....

News:

Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1696728 times)