Author Topic: Duck Viper and Eagle Group Buy (Read 997057 times)

phatdood9 · « **Reply #600 on:** Mon, 29 September 2014, 17:11:00 »

great, just sent

thanks for putting this together elton!

Joey Quinn · « **Reply #601 on:** Mon, 29 September 2014, 17:27:44 »

Paid, I'm so excited about these inserts!

xybre · « **Reply #602 on:** Mon, 29 September 2014, 17:53:58 »

Cool, I just paid for the inserts.

Synjin · « **Reply #603 on:** Mon, 29 September 2014, 19:39:11 »

Invoice paid for 6 inserts

Xenderwind · « **Reply #604 on:** Mon, 29 September 2014, 20:42:41 »

Paid for 2x insert sets....totally blanked though and forgot to include my username when I sent it. I was too busy making sure I sent the right amount :S. I'll send you a pm.

Synjin · « **Reply #605 on:** Mon, 29 September 2014, 20:44:27 »

Quote from: Xenderwind on Mon, 29 September 2014, 20:42:41

Paid for 2x insert sets....totally blanked though and forgot to include my username when I sent it. I was too busy making sure I sent the right amount :S. I'll send you a pm.

I actually did the exact same thing. I noted all of the calculation and the items I ordered yet I did not include my username T_T

evolveS · « **Reply #606 on:** Mon, 29 September 2014, 20:57:40 »

Sent payment for two sets of Viper/Eagle inserts.

cooldiscretion · « **Reply #607 on:** Mon, 29 September 2014, 22:03:16 »

I forgot to note what I ordered in my payment comments.

Karura · « **Reply #608 on:** Mon, 29 September 2014, 23:35:52 »

Just a heads up I am looking to take over an order (Eagle in black) if anyone is letting go of theirs, thanks!

feizor · « **Reply #609 on:** Tue, 30 September 2014, 02:45:08 »

Quote from: Karura on Mon, 29 September 2014, 23:35:52

Just a heads up I am looking to take over an order (Eagle in black) if anyone is letting go of theirs, thanks!

Aren't orders still open? You should message Elton first.

Karura · « **Reply #610 on:** Tue, 30 September 2014, 09:27:48 »

Quote from: feizor on Tue, 30 September 2014, 02:45:08

Quote from: Karura on Mon, 29 September 2014, 23:35:52
Just a heads up I am looking to take over an order (Eagle in black) if anyone is letting go of theirs, thanks!

Aren't orders still open? You should message Elton first.

Good idea, I've done that

I just assumed it was closed due to the OP post. My wallet is ready!

JaccoW · « **Reply #611 on:** Tue, 30 September 2014, 13:00:25 »

Have you started invoicing for the inserts Elton? Even the Orion ones?

cooldiscretion · « **Reply #612 on:** Tue, 30 September 2014, 13:21:30 »

Quote from: JaccoW on Tue, 30 September 2014, 13:00:25

Have you started invoicing for the inserts Elton? Even the Orion ones?

He mentioned in this thread a few posts back that he would rather you calculate payment, add in
recommended shipping costs, and send payment to him via PayPal as a gift.

pasph · « **Reply #613 on:** Wed, 01 October 2014, 18:34:04 »

money sent

Synjin · « **Reply #614 on:** Wed, 01 October 2014, 18:48:11 »

Has the first batch of keyboards shipped yet?

demik · « **Reply #615 on:** Thu, 02 October 2014, 08:22:00 »

Why was this locked o.o

elton5354 · « **Reply #616 on:** Thu, 02 October 2014, 08:45:58 »

They are delayed a little. It is still in the packing process.. Sorry about that.

I have no idea why this thread was locked yesterday. I tried to unlock it but was restricted by admin.

demik · « **Reply #617 on:** Thu, 02 October 2014, 08:48:28 »

Genius staff 0/10 wouldnt hire

Synjin · « **Reply #618 on:** Thu, 02 October 2014, 09:05:54 »

Quote from: elton5354 on Thu, 02 October 2014, 08:45:58

They are delayed a little. It is still in the packing process.. Sorry about that.

I have no idea why this thread was locked yesterday. I tried to unlock it but was restricted by admin.

I'm assuming late October then? Oh well at least it is still not that far away ^^

Fnzzy · « **Reply #619 on:** Thu, 02 October 2014, 09:58:10 »

I've waited so long, I suppose a little longer won't hurt at all. I'm just happy about updates!

xybre · « **Reply #620 on:** Thu, 02 October 2014, 10:08:14 »

Quote from: Synjin on Thu, 02 October 2014, 09:05:54

Quote from: elton5354 on Thu, 02 October 2014, 08:45:58
They are delayed a little. It is still in the packing process.. Sorry about that.

I have no idea why this thread was locked yesterday. I tried to unlock it but was restricted by admin.
I'm assuming late October then? Oh well at least it is still not that far away ^^

So are we looking at more like Halloween, or more like Christmas?

demik · « **Reply #621 on:** Thu, 02 October 2014, 10:46:11 »

Damn just going to skip over thanksgiving like that?

xybre · « **Reply #622 on:** Thu, 02 October 2014, 10:49:04 »

Quote from: demik on Thu, 02 October 2014, 10:46:11

Damn just going to skip over thanksgiving like that?

Yeah I was trying to be internationally sensitive, I don't know what fall festivals people celebrate but I'm pretty sure it doesn't involve pilgrims and (american) indians.

demik · « **Reply #623 on:** Thu, 02 October 2014, 10:54:08 »

Leave sensitivity to soccer moms and tumblrinas

deci · « **Reply #624 on:** Thu, 02 October 2014, 12:59:18 »

Hmmm since I'm in the second shipment... looks like I'm having eagle for thanksgiving.

Synjin · « **Reply #625 on:** Thu, 02 October 2014, 13:59:32 »

Perhaps it will surprise us when it shows up at our doorstep at the end of the month.

Motan22 · « **Reply #626 on:** Thu, 02 October 2014, 14:06:18 »

Payment sent for acrylic inserts Elton. Thanks for offering these up to us.

StylinGreymon · « **Reply #627 on:** Fri, 03 October 2014, 03:43:39 »

Must...have...Viper!

minho · « **Reply #628 on:** Fri, 03 October 2014, 09:36:58 »

Just paid for a set of inserts. There wasn't any mention of Paypal fees though, so elton please say if you received all the money from me (I put my forum username in the notes of the payment).

Synjin · « **Reply #629 on:** Fri, 03 October 2014, 09:56:36 »

Quote from: minho on Fri, 03 October 2014, 09:36:58

Just paid for a set of inserts. There wasn't any mention of Paypal fees though, so elton please say if you received all the money from me (I put my forum username in the notes of the payment).

If payment is sent as a gift, it sometimes charges a small fee although if a certain account is used on your paypal to pay for the gift then it won't charge you the fee

elton5354 · « **Reply #630 on:** Fri, 03 October 2014, 15:25:42 »

Ok I'm going to create a spreadsheet so you guys can see whether you guys are paid or on the list. Probably over the weekend.

Fnzzy · « **Reply #631 on:** Fri, 03 October 2014, 16:29:51 »

Paid for 2 pairs for the Viper. Thanks for organizing this!

Sent · « **Reply #632 on:** Fri, 03 October 2014, 16:39:44 »

For once, I don't mind if the board is a bit delayed. I still need to find stabs and pick up switches.

Fnzzy · « **Reply #633 on:** Fri, 03 October 2014, 16:45:02 »

Quote from: Sent on Fri, 03 October 2014, 16:39:44

For once, I don't mind if the board is a bit delayed. I still need to find stabs and pick up switches.

Got my switches from 7bit and Qwer.io has some stabs left (only 5 2x PCB).

demik · « **Reply #634 on:** Fri, 03 October 2014, 17:10:32 »

Quote from: Sent on Fri, 03 October 2014, 16:39:44

For once, I don't mind if the board is a bit delayed. I still need to find stabs and pick up switches.

Me too ;_;

Sent · « **Reply #635 on:** Fri, 03 October 2014, 17:15:46 »

Quote from: Fnzzy on Fri, 03 October 2014, 16:45:02

Got my switches from 7bit and Qwer.io has some stabs left (only 5 2x PCB).

Thanks for the link to the stabs.

Just picked up what I needed.

paobit · « **Reply #636 on:** Fri, 03 October 2014, 19:56:05 »

what are stabs? i got my switches and stabilizers...would i need to buy stabs too?

feizor · « **Reply #637 on:** Fri, 03 October 2014, 19:59:20 »

Quote from: paobit on Fri, 03 October 2014, 19:56:05

what are stabs? i got my switches and stabilizers...would i need to buy stabs too?

stabs = stabilizers

paobit · « **Reply #638 on:** Sat, 04 October 2014, 01:19:54 »

lol thanks!

Sent · « **Reply #639 on:** Sat, 04 October 2014, 01:44:33 »

Quote from: paobit on Fri, 03 October 2014, 19:56:05

what are stabs? i got my switches and stabilizers...would i need to buy stabs too?

I'm just too lazy to type out stabilizer. Lol.

elton5354 · « **Reply #640 on:** Sat, 04 October 2014, 11:20:37 »

Could people PLEASE include your name in your address? I can't send things off without a name...and it's harder for me to match my paypal info with the spreadsheet if not enough info is given.

I just found a person didn't give the right amount (just started doing the first 3..). Please calculate it right before sending..I'm going to PM those who didn't send the right amount and to confirm their order.

Again it's;

$4 * amount of insert + listed shipping cost + $0.75 + if there are any paypal fees for gift payment

Synjin · « **Reply #641 on:** Sat, 04 October 2014, 11:47:17 »

I just sent you a PM containing my order info as well as the pay pal transaction number

elton5354 · « **Reply #642 on:** Sat, 04 October 2014, 12:20:47 »

There are actually a lot of people that didn't put their names on the order form..I'm just going to use their paypal's name and copy it to the address column..(sometimes it doesn't match), but I'm not going to PM every single one for their names..

Synjin · « **Reply #643 on:** Sat, 04 October 2014, 12:25:40 »

Quote from: elton5354 on Sat, 04 October 2014, 12:20:47

There are actually a lot of people that didn't put their names on the order form..I'm just going to use their paypal's name and copy it to the address column..(sometimes it doesn't match), but I'm not going to PM every single one for their names..

Mine should be good if I placed my name on the PM I sent you?

elton5354 · « **Reply #644 on:** Sat, 04 October 2014, 12:26:50 »

Quote from: Synjin on Sat, 04 October 2014, 12:25:40

Quote from: elton5354 on Sat, 04 October 2014, 12:20:47
There are actually a lot of people that didn't put their names on the order form..I'm just going to use their paypal's name and copy it to the address column..(sometimes it doesn't match), but I'm not going to PM every single one for their names..

Mine should be good if I placed my name on the PM I sent you?

you're fine.

elton5354 · « **Reply #645 on:** Sat, 04 October 2014, 12:45:59 »

Here's the spreadsheet you can look over..

https://docs.google.com/spreadsheets/d/1mlGWvNuk5QabOohBKYSD2rcQFcjALC0BZWs1RB1lV1E/pubhtml?gid=0&single=true

Gh05tx · « **Reply #646 on:** Sat, 04 October 2014, 16:04:00 »

For those who are doing leds where are you guys buying them from?

Synjin · « **Reply #647 on:** Sat, 04 October 2014, 16:28:51 »

I was going to wait for dork Vader's group buy but ATM I'm not surein where either. EBay perhaps

ceflame · « **Reply #648 on:** Sat, 04 October 2014, 16:36:06 »

I got some of those 2x3x4 LEDs from aliexpress and it took almost a month to arrive. Ebay took a week, both from China.

Though I guess it really depends on who you're buying it from.

Synjin · « **Reply #649 on:** Sat, 04 October 2014, 17:04:48 »

Quote from: ceflame on Sat, 04 October 2014, 16:36:06

I got some of those 2x3x4 LEDs from aliexpress and it took almost a month to arrive. Ebay took a week, both from China.

Though I guess it really depends on who you're buying it from.

how much was the price difference as well as color options?

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: Duck Viper and Eagle Group Buy (Read 997057 times)