Any photos of the grey case?
Any photos of the grey case?
On Instagram
https://www.instagram.com/p/ByZPuLPHtWF/?hl=en
tempting...
Where can I see more pictures of this board?
Each set weighs about TBD kg with packaging.
Approved! Sorry for being slow :'(
Is it FCFS or raffle?
Is it FCFS or raffle?
Its FCFS until the 100 spots are filled up
I dont see my name on the list. Did I not make it?
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Where did you see that? Can you link?
I don’t see my name on the list. Did I not make it?
Sadly, you did not make it...if 6 ish~ people cancels, you may have a chance.
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Where did you see that? Can you link?
every board has ano problems with grey, has been an issue since literally the beginning of time in keyboards
there will probably be a delay and then it'll be close enough to be fine
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Where did you see that? Can you link?
every board has ano problems with grey, has been an issue since literally the beginning of time in keyboards
there will probably be a delay and then it'll be close enough to be fine
So now that Puddsy has weighed in, we can get back to the original question which was where it was specifically said on insta... ?
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Where did you see that? Can you link?
every board has ano problems with grey, has been an issue since literally the beginning of time in keyboards
there will probably be a delay and then it'll be close enough to be fine
So now that Puddsy has weighed in, we can get back to the original question which was where it was specifically said on insta... ?
https://www.instagram.com/p/ByZPuLPHtWF/ comment here and this https://www.instagram.com/p/Byhk0hSHtv4/ just got me confused. I never claimed someone "specifically" said anything tho i started my sentence with "not sure if i understood correctly". I also didn't know grey is hard to anodize in general, my bad.
Hello,What will be the value declared on the package?
Anyone willing to buy an extra plate/pcb for me? I already have a v2 case, pm me and we can sort out the details! Also located in the Seattle area if that helps (I’m cool with local or shipped.)
Any estimate on the when the invoices will be out? Just being irrationally afraid of missing the Sept. 4th deadline. :))I second this!
Hello,What will be the value declared on the package?
duck usually underdeclares, if memory serves correctly, at $35
Thirded'Any estimate on the when the invoices will be out? Just being irrationally afraid of missing the Sept. 4th deadline. :))I second this!
Updated deadline to September 15. Currently sending out invoices now. May not finish it by tonight though.Awesome, Thanks for the update!
Updated deadline to September 15. Currently sending out invoices now. May not finish it by tonight though.
Hmm not sure if i understood correctly (or rather if google translator works) but i saw on duck's insta there might be ano problems for the grey version ? Have those been resolved ?
Where did you see that? Can you link?
every board has ano problems with grey, has been an issue since literally the beginning of time in keyboards
there will probably be a delay and then it'll be close enough to be fine
Thanks for the heads up. What kind of quality issues would there be?
I really like the gray and want to consider taking the risk but would like a better understanding of what could go wrong.
Thanks Elton i just responded to your email about keeping my case color Gray.Thanks for the heads up. What kind of quality issues would there be?
I really like the gray and want to consider taking the risk but would like a better understanding of what could go wrong.
I believe it's the consistency of the colour. It is very hard for the anodizing manufacturer to get the colours to the same gray quality Duck wants. So there may be some inconsistency, but Duck/Truecustom will try their best, but they cannot guarantee it. It has nothing to do with the case quality, only the colour is the issue.
It may be a bit late, but I stopped invoicing those that chose gray as their case colour. I will only invoice after you accept that I can't guarantee the anodizing quality of gray.
Thanks and sorry for the inconvenience.
Thanks for the heads up. What kind of quality issues would there be?
I really like the gray and want to consider taking the risk but would like a better understanding of what could go wrong.
I believe it's the consistency of the colour. It is very hard for the anodizing manufacturer to get the colours to the same gray quality Duck wants. So there may be some inconsistency, but Duck/Truecustom will try their best, but they cannot guarantee it. It has nothing to do with the case quality, only the colour is the issue.
It may be a bit late, but I stopped invoicing those that chose gray as their case colour. I will only invoice after you accept that I can't guarantee the anodizing quality of gray.
Thanks and sorry for the inconvenience.
Hello,What will be the value declared on the package?
duck usually underdeclares, if memory serves correctly, at $35
Can I get my invoice updated to remove the extra plate?
I'll be flying to my cruise vacation tonight, so I may or may not have internet for an entire week. So if I don't respond, I should be able to after Sept 15. (I know there are internet packages on cruises, but I'm too cheap :D)
Any idea when the payment sheet will be updated?
I'll be flying to my cruise vacation tonight, so I may or may not have internet for an entire week. So if I don't respond, I should be able to after Sept 15. (I know there are internet packages on cruises, but I'm too cheap :D)
Hi. i dont see any update from you
Can you still order one
Can you still order one
no
wait red was an option?
Updates? production time? est shipping time frame? Thread seems dead. :|
Is ordering still available, and does it support ISO?Ordering has closed
Edit: A supported layout image would be appreciated, cause the product page link provided does not work for me.
I just checked kbdlab and it seems like the first octagon v3s are being sent out (at least in korea)Show Image(https://i.imgur.com/JHWGo8T.png)
this is obvioiusly a ****ty google translate translation, where deduction = groupbuy
it has last been edited on the 5th of december, so the change is pretty recent.
My old account for kbdlabs didnt work anymore, so I had to sign up again, which weirdly takes two days to activate. So I can give you guys a little more info then.
Duck replied to an instagram comment saying that it might ship next month.Hot Damn!
Hi all,Wow, that was faster than I expected, hyped to get my first duck board
The keyboards are being prepared for shipment and address changes are no longer allowed. I will update you when it ships.
Thanks.
Hi all,Hip Hop Hooray
The keyboards are being prepared for shipment and address changes are no longer allowed. I will update you when it ships.
Thanks.
I just filled out the form for a silver one....It's obviously a really late application, can you tell me if all 100 are already spoken for? Has anyone dropped out or is there a waiting list?
First batch tracking is up. Sorry for the delay!
Tracking is up. All units have been shipped!
Tracking is up. All units have been shipped!
Awesome. What's next on your list for 2020?
Hiney x duck pcb? Let's getitTracking is up. All units have been shipped!
Awesome. What's next on your list for 2020?
https://www.instagram.com/p/B77_vdAn1j_/ maybe? would love a non-O2D pcb with it though
Mine came in today! It was very well packed and everything came flawless. Hope I can make some time this weekend to build it
The grey turned out great! Thank You!
Also really looking forward to any organized weight/insert gb for this now, but I suspect we may have to wait after the next round of viper/eagle gb just to get more people for an overall group buy back weights for the boards.
The grey turned out great! Thank You!
Also really looking forward to any organized weight/insert gb for this now, but I suspect we may have to wait after the next round of viper/eagle gb just to get more people for an overall group buy back weights for the boards.
Is it necessary to do a group buy? I was sent the dwg file for the octagon weights from some of the octagon owners in korea and they suggested just getting the external weight 3d printed.
The grey turned out great! Thank You!
Also really looking forward to any organized weight/insert gb for this now, but I suspect we may have to wait after the next round of viper/eagle gb just to get more people for an overall group buy back weights for the boards.
Is it necessary to do a group buy? I was sent the dwg file for the octagon weights from some of the octagon owners in korea and they suggested just getting the external weight 3d printed.
Rooky Bomb (https://instagram.com/rooky_bomb) is currently running a GB for weights in Korea.
He produced the weight seen in this picture posted by duck. https://www.instagram.com/p/B8N59wNnDfM/?igshid=f368fl0yhc2p
I talked to him and he said he will most likely do an R2 for weights for most Duck Kbs around March. He is considering to post it on Geekhack as well and I offered him my help.
Sent from my iPhone using Tapatalk
The grey turned out great! Thank You!
Also really looking forward to any organized weight/insert gb for this now, but I suspect we may have to wait after the next round of viper/eagle gb just to get more people for an overall group buy back weights for the boards.
Is it necessary to do a group buy? I was sent the dwg file for the octagon weights from some of the octagon owners in korea and they suggested just getting the external weight 3d printed.
Care to share the file? :)
Sent from my iPhone using Tapatalk
I'm seeing a lot of these boards for sale on reddit. Is there a reason why people aren't liking this board? I haven't built mine yet but it looks pretty nice.
I'm seeing a lot of these boards for sale on reddit. Is there a reason why people aren't liking this board? I haven't built mine yet but it looks pretty nice.
there are just a lot of them, especially over three versions
it also shipped relatively recently so people want to jump on the next thing or whatever
I'm seeing a lot of these boards for sale on reddit. Is there a reason why people aren't liking this board? I haven't built mine yet but it looks pretty nice.
there are just a lot of them, especially over three versions
it also shipped relatively recently so people want to jump on the next thing or whatever
I guess people are excited for the Jetstorm? As a 75/TKL hybrid?
What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
duck pcbs use o2d. the link below is the latest release
https://drive.google.com/drive/folders/1nAj_AiKSJi27i9CP7r99mA7h-wbnLMm0
What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
duck pcbs use o2d. the link below is the latest release
https://drive.google.com/drive/folders/1nAj_AiKSJi27i9CP7r99mA7h-wbnLMm0
I'm trying to figure out which is the flip key, "End" isn't putting me into the bootloader for some reason.
Done.open discord for me thanks
What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
I was able to remap using QMK and the keymap for the Octagon V2.
https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi (https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi)
Just found it in the instructions, should have looked more closely. SorryWhat software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
I was able to remap using QMK and the keymap for the Octagon V2.
https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi (https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi)
How did you put the PCB into bootloader mode since it does not have a reset switch?
i recently received a back plate for this board but does anyone know the best way to stick the plate to the bottom. The plate itself doesn't seem to have any type of adhesive to it.
Awesome thanks, will have to pick some up in these trying timesi recently received a back plate for this board but does anyone know the best way to stick the plate to the bottom. The plate itself doesn't seem to have any type of adhesive to it.
I used double sided tape.
Awesome thanks, will have to pick some up in these trying timesi recently received a back plate for this board but does anyone know the best way to stick the plate to the bottom. The plate itself doesn't seem to have any type of adhesive to it.
I used double sided tape.
Sry for trouble, did you find that right top LEDs not work after QMK flash?What software am I supposed to use to remap this? Is there a version of Jigon that's supposed to work?
I was able to remap using QMK and the keymap for the Octagon V2.
https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi (https://config.qmk.fm/#/duck/octagon/v2/LAYOUT_75_ansi)
Just flashed Duck Octagon PCB via QMK. Everything is fine except media keys (vol+, vol-, mute)... they are not working at all. Does anyone got a clue how to fix this?Sry for troulbe, is right top led working well after you flash via QMK? I found problem here. Would you help to send your hex file to me if your Octagon are working well with all leds?