Author Topic: [GB] 7V - 75% Keyboard by gok (COMPLETED)  (Read 191387 times)

Norae and 1 Guest are viewing this topic.

Offline mgsickler

  • Posts: 758
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #300 on: Thu, 20 August 2020, 04:57:40 »
Some guy is trying to sell his 7v gb spot for profit lol. It's in the mechmarket discord gb dump channel.
Can you link it?


Sent from my iPhone using Tapatalk

Just as a heads up, we do NOT allow the transferring a GB spots.

Offline lysergic acid

  • Posts: 23
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #301 on: Thu, 20 August 2020, 11:06:51 »
Some guy is trying to sell his 7v gb spot for profit lol. It's in the mechmarket discord gb dump channel.
Can you link it?


Sent from my iPhone using Tapatalk

Just as a heads up, we do NOT allow the transferring a GB spots.
Ya I knew lol, not that I was going to buy it but I was trying to see what they were asking. Can I ask why you donít allow this? And what happens if a original buyer no longer wants their spot, is it relinquished to you as an extra?


Sent from my iPhone using Tapatalk

Offline DukeEsquire

  • Posts: 531
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #302 on: Thu, 20 August 2020, 11:55:53 »
Some guy is trying to sell his 7v gb spot for profit lol. It's in the mechmarket discord gb dump channel.
Can you link it?


Sent from my iPhone using Tapatalk

Just as a heads up, we do NOT allow the transferring a GB spots.
Ya I knew lol, not that I was going to buy it but I was trying to see what they were asking. Can I ask why you donít allow this? And what happens if a original buyer no longer wants their spot, is it relinquished to you as an extra?


Sent from my iPhone using Tapatalk

There are no refunds so not sure what the circumstance would be where a buyer would give up their spot.

Offline mgsickler

  • Posts: 758
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #303 on: Thu, 20 August 2020, 12:07:47 »
Some guy is trying to sell his 7v gb spot for profit lol. It's in the mechmarket discord gb dump channel.
Can you link it?


Sent from my iPhone using Tapatalk

Just as a heads up, we do NOT allow the transferring a GB spots.
Ya I knew lol, not that I was going to buy it but I was trying to see what they were asking. Can I ask why you donít allow this? And what happens if a original buyer no longer wants their spot, is it relinquished to you as an extra?


Sent from my iPhone using Tapatalk

The purchase is no longer protected, and people have been scammed by this.

Offline lysergic acid

  • Posts: 23
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #304 on: Thu, 20 August 2020, 12:14:34 »
Some guy is trying to sell his 7v gb spot for profit lol. It's in the mechmarket discord gb dump channel.
Can you link it?


Sent from my iPhone using Tapatalk

Just as a heads up, we do NOT allow the transferring a GB spots.
Ya I knew lol, not that I was going to buy it but I was trying to see what they were asking. Can I ask why you donít allow this? And what happens if a original buyer no longer wants their spot, is it relinquished to you as an extra?


Sent from my iPhone using Tapatalk

The purchase is no longer protected, and people have been scammed by this.
Understood, thanks for clearing that up.
Are extras considered when someone wants to give up their spot and you now become the owner, which is later on sold?

Offline mgsickler

  • Posts: 758
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #305 on: Thu, 20 August 2020, 12:51:13 »
Understood, thanks for clearing that up.
Are extras considered when someone wants to give up their spot and you now become the owner, which is later on sold?

I am not 100% sure what you are asking. But if someone needs to cancel their order for unexpected reasons, we will work with the original purchaser on that. If it comes down to a cancellation, than that spot will turn into an extra that will be available later on.

Offline lysergic acid

  • Posts: 23
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #306 on: Thu, 20 August 2020, 13:06:43 »
Understood, thanks for clearing that up.
Are extras considered when someone wants to give up their spot and you now become the owner, which is later on sold?

I am not 100% sure what you are asking. But if someone needs to cancel their order for unexpected reasons, we will work with the original purchaser on that. If it comes down to a cancellation, than that spot will turn into an extra that will be available later on.
Sorry for the confusion, how an extra becomes an extra.

Offline r4bbl3d4bbl3

  • Posts: 154
  • Location: USA
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #307 on: Thu, 20 August 2020, 13:07:30 »
Understood, thanks for clearing that up.
Are extras considered when someone wants to give up their spot and you now become the owner, which is later on sold?

I am not 100% sure what you are asking. But if someone needs to cancel their order for unexpected reasons, we will work with the original purchaser on that. If it comes down to a cancellation, than that spot will turn into an extra that will be available later on.
Sorry for the confusion, how an extra becomes an extra.

They order extra boards, more than they sold at group buy.

Offline solomonshv

  • Posts: 124
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #308 on: Wed, 09 September 2020, 23:09:55 »
Sorry for the confusion, how an extra becomes an extra.
[/quote]

group buy runners and vendors pretty much always manufacture or order more items than they have buyers for. this applies to keycaps, keyboards, etc. the idea is that if something comes in defective, they have a spare to fulfill the order. once all orders are fulfilled, whatever is left is an extra. if a keyboard has small defects, it is sometimes sold as a "B stock" extra. for unlimited group buys, vendors will buy extras with their own money and sell at higher prices just to earn extra money on the side.
Keebs owned/bought::: Satisfaction 75 standard - cloud white | RAMA U80-A Moon | ai03 Vega | Gok 7V - blue & white | Clarabelle - black cow | Think6.5V2 LE | iON Zenith - Moss | KCK KY-01 - Aquamarine | J-01 Rev1 - blue | Andromeda - Grey | Iron180 - E-White | Aurora Input Series 65 - Black | Tsukuyomi - Black | Onyx - E-White

Caps owned/bought::: GMK Jamon, GMK Mizu, GMK PnC, GMK Terra, GMK Nautilus Nightmares, GMK Camping R2, GMK Analog Dreams, GMK Olivia++, GMK Cafe, GMK Bingsu, GMK Botanical, GMK Nautilus R2, GMK Taro R2, GMK MoDo R2, ePBT Classic Cyrillic, GMK Bread, GMK Sumi, GMK Pono, GMK Bento R2, GMK Sloth, GMK Yuru, GMK Serika R2, GMK Birch, GMK Dandy, GMK Tuzi, GMK Red Alert, GMK Fuji, GMK Striker R2, GMK Wasabi V2, GMK Zooted, GMK Hazakura, GMK Cyrillic Beige, GMK Cyrillic WoB,

Wish list/Will buy::: Keycult No.2/65, Trifecta by 2Moons

Offline Icemanrec

  • Posts: 12
  • Location: Hong Kong
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #309 on: Tue, 13 October 2020, 03:08:29 »
i hope there will be an Round 3 of this, i will buy 4 for just the colourways, extras will be in Feb/Mar but i dont have much luck with extras, they always sell out within seconds.

Offline itsmartin

  • Posts: 93
  • Location: Australia
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #310 on: Tue, 13 October 2020, 08:16:30 »
You might be waiting a while if youíre waiting for round 3. This was round 1.

Offline DukeEsquire

  • Posts: 531
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #311 on: Tue, 13 October 2020, 13:13:14 »
I'm waiting for round 4.

Offline pool

  • Posts: 55
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #312 on: Tue, 13 October 2020, 16:24:50 »
I am guessing it's way too late to join the GB D:


Offline lysergic acid

  • Posts: 23
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #313 on: Tue, 13 October 2020, 16:34:47 »
I am guessing it's way too late to join the GB D:
wait for round 3 like the other guy

Offline noorejji

  • Posts: 274
  • Location: yurop
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #314 on: Tue, 13 October 2020, 17:28:27 »
Iím more of a R6 kinda guy. Incidentally I donít have a lot of keyboards.

Offline alper_maestro

  • Posts: 177
  • Location: Netherlands
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #315 on: Thu, 15 October 2020, 04:36:39 »
Waiting for Round 2  :thumb:

Offline raptorex1212

  • Posts: 7
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #316 on: Thu, 15 October 2020, 11:05:01 »
Amazing keeb waiting for round 2!
I need an upgrade for my anne pro  :cool:

Offline bdegal

  • Posts: 9
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #317 on: Fri, 16 October 2020, 15:08:15 »
Dang, I was following this before the pandemic and got caught up in everything going on. Will there be a round two for this?

Offline itsmartin

  • Posts: 93
  • Location: Australia
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #318 on: Fri, 16 October 2020, 18:14:31 »
I saw on Discord Gok has said not to count on a round 2.

It hasnít been ruled out totally but he said he wanted to focus on other projects.

Offline DukeEsquire

  • Posts: 531
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #319 on: Fri, 16 October 2020, 23:57:24 »
There will be extras so, let's worry about that before asking for R2.

Offline gok_nz

  • Thread Starter
  • Posts: 664
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #320 on: Sat, 17 October 2020, 02:20:00 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.

Offline hkhawk

  • Posts: 164
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #321 on: Sat, 17 October 2020, 02:31:41 »
Woohoo, awesome news

Offline xantiema

  • Posts: 312
  • Location: Denmark
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #322 on: Sat, 17 October 2020, 05:27:03 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.

Any estimate on what the total for quantity of orders ended up being for this GB?

Offline architones

  • Posts: 47
  • Location: Guam
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #323 on: Sat, 17 October 2020, 06:16:39 »
I'm pretty sure gok/Novelkeys stated previously they won't release the final order quantities.

Offline SenseiJia

  • Posts: 119
  • Hey you.
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #324 on: Sat, 17 October 2020, 16:16:34 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.
Yessss!

Offline macclack

  • Posts: 446
  • Location: San Diego, CA
    • Macclack
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #325 on: Sat, 17 October 2020, 23:06:11 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.

Just me or is this going fast?

Offline Qarmaa

  • Posts: 40
  • Location: St. Petersburg, Russia
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #326 on: Sat, 17 October 2020, 23:41:17 »
Thanks for update, gok.

Offline Lunarpie

  • Posts: 18
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #327 on: Sun, 01 November 2020, 00:50:18 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.
This is great news. Will we still be seeing pictures of the blue anodised boards when they're complete?

Sent from my Pixel 3 using Tapatalk


Offline Darknight00z

  • Posts: 641
  • Location: UK
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #328 on: Sun, 01 November 2020, 04:28:12 »
Here is a little update.
Aluminium parts have finished machining and are starting to be anodised.
Raw stainless parts are still being machined.
PVD brass weights are 50% complete.

Just me or is this going fast?

It is going fast, until we hit a hiccup

e.g anodising colors don't look good
e.g. anodising mis-match
e.g. polishing taking too long.
e.g. employees go on strike
e.g. pandemic wave 3

don't jinx us man.

Offline peepeepants

  • Posts: 4
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #329 on: Tue, 03 November 2020, 17:07:37 »
Anyone know if Novelkeys will be stocking Extras if we didn't purchase any during groupbuy? (PCB, PVD log & weights, plates)

Offline gok_nz

  • Thread Starter
  • Posts: 664
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #330 on: Sat, 07 November 2020, 23:37:41 »
The blue anodisation colour has been selected.
It is the one on the left.


Please note that it looks really different depending on lighting conditions. Below is the same blue but in dimmer conditions.

Offline similemask

  • Posts: 3
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #331 on: Sat, 07 November 2020, 23:57:57 »
The blue colour looks pretty good :thumb:
I picked the black though :p

Offline Ryliu

  • Posts: 4
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #332 on: Sun, 08 November 2020, 02:42:16 »
Now I wish I got blue :<

Actually, I don't even remember what color I got, white?

Offline UGunaLOSE

  • Posts: 99
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #333 on: Sun, 08 November 2020, 08:19:47 »
Blue is gorgeous. Glad I switched from white to this.

Ready for 2021!

Offline hpkb

  • Posts: 32
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #334 on: Mon, 09 November 2020, 14:23:57 »
Blue color looks great!

Offline damsenviet

  • Posts: 33
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #335 on: Fri, 13 November 2020, 22:55:18 »
Are 7305 millmax sockets viable in these? I was looking to make one of my PCBs hotswappable.

Offline kaisn

  • Posts: 87
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #336 on: Sat, 05 December 2020, 12:44:46 »
Are 7305 millmax sockets viable in these? I was looking to make one of my PCBs hotswappable.
is it?

Offline treeleaf64

  • Posts: 1405
  • Location: California, USA
  • Hi it's me, treeleaf
    • Treeleaf's Youtube channel
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #337 on: Sat, 05 December 2020, 13:06:33 »
Nice , I actually like the lighter blue more than the darker one!
Good job Mr. Gok
May display immature behavior
May talk in third person
Does not understand simple things (Treeleaf moment)

Offline evidentLEE

  • Posts: 22
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #338 on: Sat, 05 December 2020, 13:37:18 »
Hopefully we can see some shots of E-White soon! Can't wait to build and type on this beauty.

Offline solomonshv

  • Posts: 124
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #339 on: Sun, 06 December 2020, 12:48:16 »
Anyone know if Novelkeys will be stocking Extras if we didn't purchase any during groupbuy? (PCB, PVD log & weights, plates)

yes, there will be extras. but you will have to move quick. they will go in seconds.
Keebs owned/bought::: Satisfaction 75 standard - cloud white | RAMA U80-A Moon | ai03 Vega | Gok 7V - blue & white | Clarabelle - black cow | Think6.5V2 LE | iON Zenith - Moss | KCK KY-01 - Aquamarine | J-01 Rev1 - blue | Andromeda - Grey | Iron180 - E-White | Aurora Input Series 65 - Black | Tsukuyomi - Black | Onyx - E-White

Caps owned/bought::: GMK Jamon, GMK Mizu, GMK PnC, GMK Terra, GMK Nautilus Nightmares, GMK Camping R2, GMK Analog Dreams, GMK Olivia++, GMK Cafe, GMK Bingsu, GMK Botanical, GMK Nautilus R2, GMK Taro R2, GMK MoDo R2, ePBT Classic Cyrillic, GMK Bread, GMK Sumi, GMK Pono, GMK Bento R2, GMK Sloth, GMK Yuru, GMK Serika R2, GMK Birch, GMK Dandy, GMK Tuzi, GMK Red Alert, GMK Fuji, GMK Striker R2, GMK Wasabi V2, GMK Zooted, GMK Hazakura, GMK Cyrillic Beige, GMK Cyrillic WoB,

Wish list/Will buy::: Keycult No.2/65, Trifecta by 2Moons

Offline ugmonk

  • Posts: 5
  • Location: Virginia
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #340 on: Wed, 23 December 2020, 23:17:36 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!

Offline IMZO

  • Posts: 116
  • Location: Canada
  • Golden Rule
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #341 on: Wed, 23 December 2020, 23:32:37 »
waiting for r3
More
Current boards: Matrix 1.2og Silver WKL , Matrix 2.0add coating black WKL, Satisfaction75 R1 Cloud white, Korno65, Bloop65, HHKB Pro 2 white,Lin Whale Pink WKL, Gok 7v White, Gok 7v Black, Orion V3 Silver WKL, Orion V2.5 Red WKL, Geon F1-8x Silver WK

Offline gok_nz

  • Thread Starter
  • Posts: 664
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #342 on: Thu, 24 December 2020, 00:35:15 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!
check the main post

Offline vixixtryx

  • Posts: 8
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #343 on: Thu, 24 December 2020, 01:36:49 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!
check the main post

Do we have any updates about how far along we are? Thanks gok

Offline 10peaches

  • Posts: 33
  • Location: New Zealand
[GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #344 on: Thu, 24 December 2020, 02:42:21 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!
check the main post

Do we have any updates about how far along we are? Thanks gok
This is the last update we have... you can safely assume everything is going according to plan.

Sent from my iPhone using Tapatalk
« Last Edit: Thu, 24 December 2020, 02:46:36 by 10peaches »

Offline Fisher

  • Posts: 18
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #345 on: Thu, 24 December 2020, 08:24:42 »
Awesome. ;D

Offline ugmonk

  • Posts: 5
  • Location: Virginia
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #346 on: Thu, 24 December 2020, 11:33:32 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!
check the main post

thanks gok, is that in millimeters?

Offline krisst

  • Posts: 133
  • Location: Little Red Dot
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #347 on: Thu, 24 December 2020, 15:11:37 »
Hi, just wondering if anyone has the dimensions of the case?  My friend wants to make a custom wrist rest for me and I'd like to have it match the dimensions of the 7v.  Thanks in advance!

check the main post

thanks gok, is that in millimeters?

321.51 by 142.74. If its not in millimeters, but in inches or centimeters, that would be a HUGE board.

Offline yuejia

  • Posts: 71
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #348 on: Sun, 27 December 2020, 07:07:06 »
Awesome!!!

Offline MikeNasty3

  • Posts: 10
Re: [GB] 7V - 75% Keyboard by gok (IN PRODUCTION)
« Reply #349 on: Mon, 04 January 2021, 18:17:28 »
Does anyone else here check this thread weekly hoping for any new info?  :)  I cannot wait for this board! Will be my first high end custom! Was going to wait to use my GMK Oliva++ on this but gave in and have them on my Novatouch for now.