Don't have a Topre board, but still following your work! Looks great :thumb:
Pastel!!!!
So niiiice
Keep up the great work! Hope to see some of your artwork move into the Artisan world in the form of a sculpt!
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?
Hey Ben! :) Making lots of Topre molds right now!! The stems fit nicely but they look a bit wonky right now on the bottom, and sometimes the air bubbles makes them not look too nice (I'm hoping to buy a pressure pot soon).
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?
Hey Ben! :) Making lots of Topre molds right now!! The stems fit nicely but they look a bit wonky right now on the bottom, and sometimes the air bubbles makes them not look too nice (I'm hoping to buy a pressure pot soon).
Wait you've been doing all this without a pressure pot? NOICE
Hi everyone!! You may have seen me around Geekhack but today I'm here to show you some stuff I've been working on!! ;)
My girlfriend and I have been making some Topre escape/fn/wasd sets! The molds are a bit tough to get perfect but we're working towards it slowly I think! Here's a sneak peek of our iridescent soapy esc/fn set. The set may glow slightly pink in the dark. ;) Sorry about the potato pic!!Show Image(https://i.imgur.com/Fx4gRqY.jpg)
The plan now is to find a $ynth and make some MX caps too! :thumb: Hope you are all having a wonderful Monday.
Hi everyone!! You may have seen me around Geekhack but today I'm here to show you some stuff I've been working on!! ;)
My girlfriend and I have been making some Topre escape/fn/wasd sets! The molds are a bit tough to get perfect but we're working towards it slowly I think! Here's a sneak peek of our iridescent soapy esc/fn set. The set may glow slightly pink in the dark. ;) Sorry about the potato pic!!Show Image(https://i.imgur.com/Fx4gRqY.jpg)
The plan now is to find a $ynth and make some MX caps too! :thumb: Hope you are all having a wonderful Monday.
We neeed Palth Prints!
We neeed Palth Prints!
We neeed Palth Prints!
Seconded
We neeed Palth Prints!We neeed Palth Prints!
Seconded
If I eventually do a sale I will DEFINITELY include prints of some of my drawings/artwork!!! :)
didn't know this thread existed
nice job so far, can't wait to see more
Lookin' good :thumb: Can't wait to see what sculpt you'll come up with!
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!Show Image(https://i.imgur.com/9lH8z4j.jpg)Show Image(https://i.imgur.com/FaqDYl8.jpg)Show Image(https://i.imgur.com/W7ONxHT.jpg)
i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot. i don't know if anything will come of my endeavors, but i'll keep trying!
anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/ (https://www.sleepystore.net/). PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!
nice! I'm looking forward to seeing what you cook up:D
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!Show Image(https://i.imgur.com/9lH8z4j.jpg)Show Image(https://i.imgur.com/FaqDYl8.jpg)Show Image(https://i.imgur.com/W7ONxHT.jpg)
i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot. i don't know if anything will come of my endeavors, but i'll keep trying!
anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/ (https://www.sleepystore.net/). PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!
That's a beautiful sculpt! I love where you're going with it, keep it up! :heart:
saaaweet sculpt, sleepy!Show Image(https://thumbs.gfycat.com/AltruisticIncomparableCarp-size_restricted.gif)
Great work! :D
you're all way too kind. reading these replies makes me smile!
you're all way too kind. reading these replies makes me smile!
the more I check your sculpt out, I see that nose and think of this gif (more specifically that ending "boop"). It's just that nose you see and go "boop".MoreShow Image(https://media.giphy.com/media/141amBdjqs9Vvy/giphy.gif)
Show Image(https://i.imgur.com/wDc721w.jpg)
I made a master cast of the bun! She's got a little pink hair clip.
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!Show Image(https://i.imgur.com/9lH8z4j.jpg)Show Image(https://i.imgur.com/FaqDYl8.jpg)Show Image(https://i.imgur.com/W7ONxHT.jpg)
i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot. i don't know if anything will come of my endeavors, but i'll keep trying!
anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/ (https://www.sleepystore.net/). PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!
lovechan, family u my fav :p
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!Show Image(https://i.imgur.com/9lH8z4j.jpg)Show Image(https://i.imgur.com/FaqDYl8.jpg)Show Image(https://i.imgur.com/W7ONxHT.jpg)
i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot. i don't know if anything will come of my endeavors, but i'll keep trying!
anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/ (https://www.sleepystore.net/). PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!
cute x n (๑•ㅂ•́)و✧
Aaaand some topre and mx blanksShow Image(https://i.imgur.com/6VdvSe3.jpg)Show Image(https://i.imgur.com/3EbIgAA.jpg)
Aaaand some topre and mx blanksShow Image(https://i.imgur.com/6VdvSe3.jpg)Show Image(https://i.imgur.com/3EbIgAA.jpg)
Aaaand some topre and mx blanksShow Image(https://i.imgur.com/6VdvSe3.jpg)Show Image(https://i.imgur.com/3EbIgAA.jpg)