geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: sennin32 on Tue, 23 January 2018, 03:29:28
-
GB link : https://shopkey.doyustudio.com/001pcb60s (https://shopkey.doyustudio.com/001pcb60s)
FAQs : https://geekhack.org/index.php?topic=93685.msg2552722#msg2552722 (https://geekhack.org/index.php?topic=93685.msg2552722#msg2552722)
We also provide other options, ie. keycap, switches, plate...etc.
(https://imgur.com/v3nU06Y.jpg)
(https://imgur.com/gpiP2DG.jpg)
(https://imgur.com/LFVWdlw.jpg)
(https://imgur.com/BavkHi7.jpg)
This GB will end on Feb 04, 2018
All item will ship around Mid March, 2018.
Features:
- Available for standard arrows
- Keep Shift on the right hand
- Standard Alpha / Shifted Alpha
- USB Type C
- 20 RGB underglow LEDs presoldered
- Both work with ANSI and ISO
- Switches light support
- Gold plated soldering pads
- Split spacebar, support both Filco type 3u Spacebar and 2.75u Keycap
- SMD parts pre-soldered
- 3u spacebar*2, use them evenly.
- QMK ready
- All switch LEDs with same direction, more even light
-
Approval bump. As always, Caveat Emptor (https://geekhack.org/index.php?topic=36773.0).
-
What is the shipping to EU?
-
Im in. and 4order(2bk, 2wk and s/w)
Thanks
-
What is the shipping to EU?
Around 6~8
You can check it by add it into cart, and it will shows up before check out :)
-
Does it support holtites? If so which ones?
-
This is tempting =).
I already have a Southpaw 65 project on the way. Dare I start a 60% too? ;P
-
Does it support holtites? If so which ones?
Check it here :)
https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/ (https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/)
-
FAQs :
Which plate fit my layout? PCB or plate mount?
Default Layout : https://goo.gl/hctK64 (https://goo.gl/hctK64) (Plate stabs)
ANSI & ISO w/ Arrow : https://goo.gl/RGCTYW (https://goo.gl/RGCTYW) (PCB stabs)
Universal ANSI : https://goo.gl/yLtRxF (https://goo.gl/yLtRxF) (PCB stabs)
Universal ANSI & ISO : https://goo.gl/VjNXUB (https://goo.gl/VjNXUB) (PCB stabs)
Shifted ZXCVB Universal ANSI : https://goo.gl/57AkTc (https://goo.gl/57AkTc) (PCB stabs)
Shifted ZXCVB Universal ANSI & ISO : https://goo.gl/TzVWFH (https://goo.gl/TzVWFH) (PCB stabs)
Holtites
https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/ (https://www.reddit.com/r/MechanicalKeyboards/comments/7seqfj/gb_do60_pcb_for_60_rgb_underglow_mechanical/dt466fh/)
-
Is there a carbon fiber plate option for split spacebar available here or in existence period?
-
Is there a carbon fiber plate option for split spacebar available here or in existence period?
For now, we don't have it, but maybe in the future if many people want it.
-
Is there a carbon fiber plate option for split spacebar available here or in existence period?
For now, we don't have it, but maybe in the future if many people want it.
It would be much more awesome of you to release FR4 and/or polycarb plate.
-
What about the case? Will it fit a standard 60% USB type C case?
-
What about the case? Will it fit a standard 60% USB type C case?
I think it is rare for 60% case on market support only type-c.
Most of them are universal @@
-
What about the case? Will it fit a standard 60% USB type C case?
I think it is rare for 60% case on market support only type-c.
Most of them are universal @@
Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.
If the USB port is in the standard configuration, it should work with any type-c compatible case.
-
I sent email. plz, check.
-
I sent email. plz, check.
Replied :)
-
What about the case? Will it fit a standard 60% USB type C case?
I think it is rare for 60% case on market support only type-c.
Most of them are universal @@
Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.
If the USB port is in the standard configuration, it should work with any type-c compatible case.
There were pictures in the IC. The C-Plug just about fits into a regular case, it's very close though.
-
What about the case? Will it fit a standard 60% USB type C case?
I think it is rare for 60% case on market support only type-c.
Most of them are universal @@
Most are mini-B. Type C is wider than mini-B and therefore there aren't many cases that actually support it.
If the USB port is in the standard configuration, it should work with any type-c compatible case.
There were pictures in the IC. The C-Plug just about fits into a regular case, it's very close though.
Yup.
Most of cases' cut out of port is not fit mini port perfectly.
So it should fit for most cases.
But there's some cases are design for only mini port.
-
Any pictures of the brass plate that could be added on with the pcb?
-
Signed up to say that I signed up for the case IC and will be taking the plunge on this shortly!
Great work on the pricing that includes the top plate too. Will this be making it to retail on your store eventually?
-
Just bought my stuff, super excited to see this happening!
-
will there be an option to get a pcb without the website link? i think it looks really clean without it, at least shrink the link to a corner or somewhere less distracting?
-
Hi, I'm still waiting for the refund on my order so that I can buy 3 pcbs instead.
-
i would like to see a GB extensio since everybody is still waiting for refunds before buying more pcbs.
-
Hi, I'm still waiting for the refund on my order so that I can buy 3 pcbs instead.
Hi, do you have order number?
We’ll cancel old order and you can buy again.
i would like to see a GB extensio since everybody is still waiting for refunds before buying more pcbs.
🤣
-
Can you get this PCB as an add-on for the 60% case you're doing IC for now as well, or do you only get it from this GB?
-
Ordered 2!
-
I emailed with a question a few days ago. Can you take a look please?
-
I emailed with a question a few days ago. Can you take a look please?
I think I just read and replied all the mails during weekend couple hours ago.
Could you send pm with your mail address?
Let me check for you.
-
The GB page you link to gives a 404 error.
-
The GB page you link to gives a 404 error.
Hi, this groupbuy ended this week :)
-
:D
-
Hi,
Everybody, thank you for join this group buy.
Lunar new year vacation just end this week and we're back.
As we discussed in IC thread (https://geekhack.org/index.php?topic=91773 (https://geekhack.org/index.php?topic=91773)), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757 (https://geekhack.org/index.php?action=profile;u=57757)) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!
-
Hi,
Everybody, thank you for join this group buy.
Lunar new year vacation just end this week and we're back.
As we discussed in IC thread (https://geekhack.org/index.php?topic=91773 (https://geekhack.org/index.php?topic=91773)), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757 (https://geekhack.org/index.php?action=profile;u=57757)) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!
I screwed up by not ordering a plate. Any chance it's still possible to order a plate?
Sent from my ONEPLUS A5010 using Tapatalk
-
As we discussed in IC thread (https://geekhack.org/index.php?topic=91773 (https://geekhack.org/index.php?topic=91773)), we spotted a issue with type c device connection.
Which is not able to be recognized directly by a device w/ native USB type C port.
Thanks jmdaly (https://geekhack.org/index.php?action=profile;u=57757 (https://geekhack.org/index.php?action=profile;u=57757)) for helping us to find issues on our board.
We've solved it before vacation, but we have to make one more prototype and make sure the board work great.
It is going have 2 weeks delay.
We're really sorry for that, but we hope we can bring people the best items!
I'm glad to help and really appreciate you guys making the effort to resolve the issue! Really looking forward to doing some builds with these PCBs :)
-
How's the new prototype looking?
-
Any updates? Also, can I add a bunch of MX Clears to my order and ship it together w/ the pcbs?
-
How's the new prototype looking?
https://www.instagram.com/p/BgCbysUhPSj/?taken-by=doyushopkey
We made a blue one @Q@
-
Any update on the GB status? :)
-
Any update on the GB status? :)
Still wondering the same...
-
Any update on the GB status? :)
Still wondering the same...
I think we should get an update considering we were originally told it would ship out in the middle of March. We are well over the 2 week delay given in the last update.
Sent from my SM-G955F using Tapatalk
-
Any updates?
-
I PM'd the runner shortly after my comment and they told me this:
We received the PCB, but the led is wrong.
That makes lot of led fail.
We've send back and ask manufacturer to process it again.
I guess we will have to wait a bit more.
-
April is coming to an end, I think the runner must appear on this stage.
-
Hi,
PCB manufacturer use wrong led brand.
And the temp is not correct, make lot of leds fail.
We've sent them back for replacement 2 weeks ago.
And it should already finished, manufacturer told us it will be sent around Apr 20th. we'll receive them in 1 week :)
Sorry for delay :(
-
Thanks for the update. If you are able to answer, when do you think the PCBs might be shipped out to backers, as I might need to update my shipping address depending on the eta
-
Will there be any extras for sale after this concludes?
-
Thanks for the update. If you are able to answer, when do you think the PCBs might be shipped out to backers, as I might need to update my shipping address depending on the eta
Hi,
I think we'll pack and ship most packs before May 5th.
But I don't know which shipping method you use.
Please send us message include your order#.
I'll tell you when it should arrive :)
-
Are there any updates to this?
-
So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...
-
So...any update on when they are shipping? I sent you an email a couple days ago about it, but no answer yet. Would like to have some info seeing as it is quite a bit late now...
+1 here...
-
Got an email with a tracking number.
-
Got an email with a tracking number.
I still have nothing...Hopefully I get something soon.
-
Bumping this up for visibility. Sennin I would like an update please.
-
Bumping this up for visibility. Sennin I would like an update please.
Same...
-
Okay, so I went on the Doyu discord to see if by chance there was info from him.
Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...
Wish he would make the update himself, but that is the info straight from his comments.
-
Okay, so I went on the Doyu discord to see if by chance there was info from him.
Seems he is only shipping 1 PCB per day atm as they have to manually check each board for functionality because the manufacturer used the wrong soldering temp. Because of this he has only sent about 40% of the orders so far, which sucks for the 60% of us haven't received a shipment notification, as we get to wait even longer...
Wish he would make the update himself, but that is the info straight from his comments.
That sucks! Really appreciate the dedication.
Would you mind sharing a link to their Discord?
-
That sucks! Really appreciate the dedication.
Would you mind sharing a link to their Discord?
Yes it does, hopefully it goes quick, as I am tired of waiting tbh...
The discord link is in his signature. (https://discord.gg/YkrdMpy)
-
Are there any updates to this?
Sent yours several days ago, should receive soon XD
-
Any updates on PCB? I sent an email and messaged on Facebook enquiring on my order?
-
Got mine this morning. Good looking non-glossy black.
The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led resistorcapacitor I should place there?
Standard mapping is weird, haven't had the time to look at the matrix yet. Is that code pushed to a TMK or QMK branch somewhere?
-
Every day I check this thread there's a new upsetting update. Really thinking I should have just went with a DZ60 from KBDFans... Albeit this is my first GB besides GMK 9009 and that went extremely smoothly.
-
Friend got a DZ60 on which not all pin holes were drilled through. So it's not like everything has always been completely stellar over there either.
-
You guys can make hex files using the QMK Toolbox here: https://config.qmk.fm/#/do60/LAYOUT_all
Please be advised that the diode for Fn on split right shift is also in the wrong orientation. Sigh..
-
Kinda glad I cancelled my GB on this. So many issues and unclear communication. Hope those that got theirs are able to make 'em work. =/
-
Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email
-
Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email
I am wondering the same...Still have not received my tracking yet.
-
Has everyone who has received their PCB also got a tracking number? It's almost June and I haven't got one yet, I'm starting to wonder if the seller is just sending them out without tracking. Which is fine, I just want to know if I should be expecting it without an email
I am wondering the same...Still have not received my tracking yet.
Checked the last few weeks on the Discord... The seller seems fairly active on there. Odd. There was on user who got his without a tracking number. And on May 21st, the seller said they should "all be shipped in 1-2 weeks", and tomorrow will be 2 weeks from the post. Also, 25-30 PCBs were "ready to be shipped" as of last night?
-
Got my tracking info via email today in case anyone is curious.
-
Got my tracking info via email today in case anyone is curious.
Same here! A few more on the discord have been getting theirs as well.
-
The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led resistorcapacitor I should place there?
Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)
-
I still haven't received any tracking info for this one :-\
-
I still have nothing about my order either.
-
The soldering job on some of the RGBs is a bit messy and D15 and CL19 are straight up missing. What's the RGB led resistorcapacitor I should place there?
Since apparently nobody gives a **** about this thread, could the discord people please dig up which parts I need to get the damn thing operational?
I need the type/package size of the SMD diodes as well as the capacitor value that's installed next to each RGB LED. (D15 and CL19, specifically)
You can join his discord server at https://discord.gg/YkrdMpy
-
I received the tracking number but there is no movement after May 30th. from Taiwan
-
Were there any other updates to supported layouts? Because I cannot seem to get 1.25-1.25-1.25-3.0-2.75-1.25-1.25 to slot correctly.
-
Have these all shipped? I haven't received tracking yet.
-
I got mine already, and i did a pcb mount clear tray build with it :thumb:
-
I've also received mine and tested it to verify it worked. But it didn't stand up to the stress of putting it together, two columns broke in the process, I can't figure out where, it's not like I'm inexperienced so I don't think it was me. I wish there wasn't so many difficulties with this manufacturer.
-
What do you mean by two columns broke?
-
I‘ve been looking for a black 60% QMK-powered PCB, but couldn‘t find one. Are there any leftovers?
-
What do you mean by two columns broke?
They just didn't work after I soldered the switches in. I used a multimeter to cherry the connections between the switches and they were continuous so I don't know what happened if maybe somehow the column lost connection with the controller or what
-
still haven't received mine. I received an email saying they ran out of black pcb's and if it was okay for me to get a white one, aswered the next day but nothing new since then...
-
Still haven't received mine. I've had no shipping notifications or contact of any kind.
-
Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough :confused:)
If you guys haven't received your pcb, please tell me :)
-
Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough :confused:)
If you guys haven't received your pcb, please tell me :)
I haven't received mine. PMing you as well.
EDIT: Wait, I ordered the Chiwi60, I bet the PCB is coming with that order. Whoops.
-
Got an email on June 15 asking if I was willing to change the PCB color from black to white, but I have not heard anything since then.
-
Hi,
Could you tell me your order #?
We didn't get reply for 3 orders O_Q
Not sure if the mail system lost it.
-
Hi,
Guys we've sent all the orders except 3.
They didn't reply me about the color issue (We miscalculate the color, so black one is not enough :confused:)
If you guys haven't received your pcb, please tell me :)
Hey there,
I have yet to receive my PCB. You told me via email that it was sent and I asked for a tracking number, but got no response since then. Could you PM me the tracking number please?
Thanks!
-
We've made 2nd batch.
and LED works nice this time :)
-
Hi,
The Group has ended several months ago.
We got some extra PCBs.
If you missed this groupbuy but still want to get one.
Check it here : https://shopkey.doyustudio.com/001pcb60 (https://shopkey.doyustudio.com/001pcb60)