Good looking design, filled the IC form ;)
Imgur link isn't working...
Is this case top mount? and also like to ask is the base wide enough that it won't tip sideway when typing? Looking forward to more photos
looks pretty solid, though it's a bit hard to tell what is on the front badge. also, the mounting points look like they'll make esc/backspace/spacebar feel pretty stiff (in theory, at least), and is there any fillet on the switch cutouts? all look totally square from the renders.
as far as plate support, i'd strongly consider stepped capslock, split right shift, and split backspace. and i'd personally go for fixed wkl bottom row, but that's just my preference ;D
I liked the OG badge, but I think this is looking pretty classy RN.
Something I thought about after submitting the IC form:
Some of the renders make the IBM off-white look pearlescent, and that seems to go well with the brass / copper of the badge and plate. I have no idea whether that can be achieved with anodising, electrophoretic deposition or Cerakoting.
But if you feel like it, maybe investigate it?
Also, I was kind of torn. I liked the industrial gray, but few keyboards have clear anodising showing the aluminium. That would be special.
But then again, it might end up looking more industrial that what you aimed for. Maybe it would only be suited to something like a Fat Boy or HMKB, that痴 intentionally industrial-looking.
Sent from my iPhone using Tapatalk
Yeah definitely something I'm looking into - whether or not the Off White will come off well, and that's why I'm going to get prototypes and evaluate from there. Off White would definitely be something I would like to offer, but if doesn't match well I'm probably looking elsewhere.
Yeah definitely something I'm looking into - whether or not the Off White will come off well, and that's why I'm going to get prototypes and evaluate from there. Off White would definitely be something I would like to offer, but if doesn't match well I'm probably looking elsewhere.
To clarify, my preference would be for some pearlescent metallic colour rather than the old off-white colour of IBM and other PCs from the early 90s. If that can't be pulled off, I'd prefer the industrial gray together with brass plate/sign.
But you're the designer, and this is supposed to be a retro design, so your call.
I知 in!!!! Plate option for 75 key orthos would be great.I'm also interested if I can cut a plate to make it work with an XD75 or Boardwalk PCB.Show Image(http://)
I知 in!!!! Plate option for 75 key orthos would be great.I'm also interested if I can cut a plate to make it work with an XD75 or Boardwalk PCB.Show Image(http://)
This is great news. Thank you!I知 in!!!! Plate option for 75 key orthos would be great.I'm also interested if I can cut a plate to make it work with an XD75 or Boardwalk PCB.Show Image(http://)
When running the group buy, I plan to release the plate as Open Source so that people can make their own plates. I have realized that I'm not going to be able to support all the layouts that people are requesting, so I hope releasing the files will bring more attention to it.
Unrealistic question; when will these go into GB phase (Any estimate is fine)?
Any chances of blockers? I like this, it reminds me of the CA66 - except I don't want a 65%, so :)
Reminds me of the Oric-1 z80 micro built in the 80's. (Attachment Link)
IC completed, very interested. Would printed case have similar weight to Alu? How about sound? I like when the look and feel of a keeb are consistent, and the chunkiness of the Modern F would call for a bit of mass. I'm open to colors. Do you choose classic IBM colorways? Or maybe it would be nice to have one that stands out? I'm looking foward to seeing the evolution towards GB.
The printed case is about half the weight of the aluminum. But it still is quite hefty at 4 lbs. The aluminum case weighs more than the original IBM keyboard, and it's physically smaller too.
As far as colors go - I'm looking to keep the IBM colorways for the aluminum and experiment a bit more with the printed cases
waiting for two-column macro cluster on the left
Interesting design, definitely want to see more. It would be great to hear more about the PCB and if you are working on Alps support. Are you mainly just trying to sell the case to fit standard 60% components? A proto of the actual machined version would be great since if it is just a case then a sound test would go a long way towards me wanting to buy. I give this the Digiorno frozen pizza rating.
Insta link is broken
FCFS or unlimited?nvm, went on the website and looked hard.
Give me Alps plate option please :-)Supposedly he'll upload the plate online so you can mod it.
FCFS or unlimited?
Give me Alps plate option please :-)Supposedly he'll upload the plate online so you can mod it.
I'm curious how high is the profile of the case around the keycaps for the aluminum version? On some renderings it looks like the bottom of the caps sit below that top surface by a mm or two and on the 3d printed protos they seem almost flush. Thanks!
Can I mount the plate with the spacebar facing towards the top for a negative typing angle?
How much for the Plain60?
The case is really cool and the design is superb. It sounds a bit hollow based on the instagram videos of the prototype. Will there be foam options/possibility to add your own foam?
Interesting design, definitely want to see more. It would be great to hear more about the PCB and if you are working on Alps support. Are you mainly just trying to sell the case to fit standard 60% components? A proto of the actual machined version would be great since if it is just a case then a sound test would go a long way towards me wanting to buy. I give this the Digiorno frozen pizza rating.
Yeah this is just a case to fit standard 60% PCBs. The aluminum prototype has already been ordered! Should arrive in a few weeks and I'll have more to share then, including the launch of my website.
So cool. I'm super excited to see how this project is coming man, you're awesome. Any thought to either alternate colored "F" badges, like the color of the cases, but so you could mix and match them (industrial gray case, with beige badge or something) or even alternate badge designs? Personally, I really like your "K&Co" label, and would think that would make a cool badge.
So cool. I'm super excited to see how this project is coming man, you're awesome. Any thought to either alternate colored "F" badges, like the color of the cases, but so you could mix and match them (industrial gray case, with beige badge or something) or even alternate badge designs? Personally, I really like your "K&Co" label, and would think that would make a cool badge.
That's a great idea. I've been playing with a second group buy after the keyboard is launched for extra plate options and alternate badges. It's definitely in the books
I'd like the alu version, but i have to go for the 3D one, becasue the HHKB layout is just so pretty to me.I'd go for an aluminium HHKB but I really don't have any interest in spending any worthwhile amount of money on a 3D printed case.
150$ (i think that what it's supposed to be) isn't so bad, but i'm going to be sanding, filling, and painting mine, so it won't have that ugly 3d print look. If i wasn't going to do that, i'd agree 100%.I'd like the alu version, but i have to go for the 3D one, becasue the HHKB layout is just so pretty to me.I'd go for an aluminium HHKB but I really don't have any interest in spending any worthwhile amount of money on a 3D printed case.
I am a bit confused on some of the language above - will a 60% Alps PCB fit in the Modern F case or must a custom printed PCB be manufactured in order to use Alps switches in the Modern F?
I am a bit confused on some of the language above - will a 60% Alps PCB fit in the Modern F case or must a custom printed PCB be manufactured in order to use Alps switches in the Modern F?
Any standard 60% PCB will fit in this case. But if you plan on using an ALPS PCB with this board, it will require a new plate. I'll be releasing the plate files along with the keyboard
hate to be the guy but is this still a thing? I would like to have one of these... unless its just a old threads being revived by someone.... :-[Website says "coming soon" and I haven't seen anything to indicate a buy has already happened - https://www.kazoosco.com/
hate to be the guy but is this still a thing? I would like to have one of these... unless its just a old threads being revived by someone.... :-[Website says "coming soon" and I haven't seen anything to indicate a buy has already happened - https://www.kazoosco.com/
I've been waiting for another board in January, but if this one comes first I would probably just bite.
Let me just chime in as somebody else who is watching this project.
I have a split-spacebar DZ60 already built with BOX Pink clicky switches that I would love to transfer straight into this case. Need bezels to give it some physical presence!
Let me just chime in as somebody else who is watching this project.
I have a split-spacebar DZ60 already built with BOX Pink clicky switches that I would love to transfer straight into this case. Need bezels to give it some physical presence!
Well I guess this board is never happening