« previous next »
Pages: « 1 [2] 3 4 5 »   Go Down

Author Topic: [IC] - Aerospace grade titanium 60% plates - GB starting shortly!!!!!!!  (Read 37369 times)

0 Members and 1 Guest are viewing this topic.

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #50 on: Fri, 03 January 2014, 11:34:08 »
I thought the hhkb layout for the gh60 uses a 7x spacebar.
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #51 on: Fri, 03 January 2014, 12:57:53 »
Quote from: Latin00032 on Fri, 03 January 2014, 02:32:58
Will these plates have switch top removal?

Quote from: bueller on Fri, 03 January 2014, 01:56:44
If these plates allow switch top removal I'll bump my order to 2 plates. Not fussed if it costs more, I've got two plates here already but they're just universal plates and I know I'll wind up wanting to change springs or stems some time in the future.

Yes, as all the other plates I have ran, they will allow for switch top removal




Quote from: dragonxx21 on Fri, 03 January 2014, 00:50:49
SWITCH TOOLS PLSSSSSSSS. No seriously. I need these switch tools.

I still have a few pairs of stainless steel switch tools, I just haven't sold them yet
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #52 on: Fri, 03 January 2014, 12:59:22 »
here's a picture of a cp2 sheet brushed at ~400 grit then given a rough lap at 2000 grit with alumina wetsanding

you can see how it desn't quite do shine; it's always a bit matte and has a dark tint to it. the surface tends more towards luster than stainless.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline AKmalamute

  • HHKB Scrub
  • Posts: 837
  • Location: Western WA, USA
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #53 on: Fri, 03 January 2014, 13:02:23 »
I'm waffling. I'd love the Ti plate just for the geek cred but the cost ...? Hmm.

But the 60% I'm hoping for is Spirit's ALPs project, hopefully coming out soon. Let's assume I drew up a file (I think I have the necessary information to do that) I'd like to know the cost of the thing before I say no I'm not in.

Also if TKL support grows to the right region I'd like to hear about that ... a phantom Ti plate in 7bit layout would make me giddy. As much for the hit to my wallet as anything but still.

Count me as interested but broke, hmm?
Logged

HHKB-lite2, Dvorak user

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #54 on: Fri, 03 January 2014, 13:02:33 »
Quote from: Latin00032 on Fri, 03 January 2014, 11:34:08
I thought the hhkb layout for the gh60 uses a 7x spacebar.

Yeah it can do 7x but I think it can also do 6x.
Logged

Offline Tym

  • [CTRL]ALT
  • * Maker
  • Posts: 1582
  • Location: England
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #55 on: Fri, 03 January 2014, 13:13:28 »
I'd like a set of switch tool's (plural or not? I dunno :()
Logged
Quote from: Yslen on Tue, 05 May 2015, 04:31:47
unless they have some unforeseeable downside (like they're actually made of cream cheese cunningly disguised as ABS)

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #56 on: Fri, 03 January 2014, 13:16:28 »
Quote from: Tym on Fri, 03 January 2014, 13:13:28
I'd like a set of switch tool's (plural or not? I dunno :()

well one set is 2 pieces so, tools
Logged

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Posts: 3300
  • NY Giants!!!
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #57 on: Fri, 03 January 2014, 13:19:22 »
HHKB gh60 :D
Logged
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline strict

  • TKL Zealot
  • Posts: 1921
  • Location: PA
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #58 on: Fri, 03 January 2014, 16:16:43 »
I am a guaranteed order for a set of switch tools. It doesnt sound like it would happen but I would also be very interested in a 75% plate for my Filco TKL (depending upon price ...).
Logged

Realforce EK45 (Silenced)  |  Realforce 87UW (45g)  |  Realforce 87UWS (Variable)
Filco MJ2 TKL (Cherry Clears)  |  Phantom 87 (78g Gateron Clears)  |  Phantom 86 (67g Zealios)

Offline yakitysax

  • Posts: 51
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #59 on: Fri, 03 January 2014, 16:46:40 »
I am in for 4 switch tools.
Logged

Offline Fritz

  • Posts: 6
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #60 on: Fri, 03 January 2014, 16:55:04 »
I'm in for a set of switch tools
Logged

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #61 on: Fri, 03 January 2014, 17:15:52 »
right now we're kind of scrambling to see what else can cut with the drawings we have ready. if the_beast has a 75% drawing ready then it might be possible to get one cut.

the trick here is that you pay for your material and cuts before we order the material from the supplier. we're trying to maximize the amount of material we order from the supplier for volume discounts, so the more the merrier _as long as a drawing exists or is made_.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #62 on: Fri, 03 January 2014, 17:28:15 »
Quote from: mkawa on Fri, 03 January 2014, 17:15:52
right now we're kind of scrambling to see what else can cut with the drawings we have ready. if the_beast has a 75% drawing ready then it might be possible to get one cut.

the trick here is that you pay for your material and cuts before we order the material from the supplier. we're trying to maximize the amount of material we order from the supplier for volume discounts, so the more the merrier _as long as a drawing exists or is made_.

One problem is that my laser guy hasn't cut Ti before, he can, his laser is 4000 watts. But since this is his first time, I can't say that these are going to be perfect....

Also, I emailed him for a quote, but I'm not sure he can give me one since he hasn't worked with the material. I should hear back from him Monday
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Halverson

  • Traitor Supreme
  • Posts: 6806
  • GIRLSHARK WIZBRO
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #63 on: Fri, 03 January 2014, 17:29:34 »

Quote from: The_Beast on Fri, 03 January 2014, 17:28:15
Quote from: mkawa on Fri, 03 January 2014, 17:15:52
right now we're kind of scrambling to see what else can cut with the drawings we have ready. if the_beast has a 75% drawing ready then it might be possible to get one cut.

the trick here is that you pay for your material and cuts before we order the material from the supplier. we're trying to maximize the amount of material we order from the supplier for volume discounts, so the more the merrier _as long as a drawing exists or is made_.

One problem is that my laser guy hasn't cut Ti before, he can, his laser is 4000 watts. But since this is his first time, I can't say that these are going to be perfect....

Also, I emailed him for a quote, but I'm not sure he can give me one since he hasn't worked with the material. I should hear back from him Monday

Can you get a quote for cutting 10 Project:Richard plates?
Logged

Offline Proc31

  • Posts: 38
  • Location: United Kingdom
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #64 on: Fri, 03 January 2014, 18:34:26 »
I'm 100% in for some switch tools.
Logged

Offline swill

  • * Elevated Elder
  • Posts: 3365
  • Location: Canada eh
  • builder & enabler
    • swillkb.com
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #65 on: Fri, 03 January 2014, 19:09:12 »
If you can put links to or pictures of the plates that you already have available.  Even if you just link to this page with the name associated.  I understand that it may not be exactly the same thing that will go to production (you might do cutouts differently for example), but at least we can get some interest numbers associated with layouts you have available.

I think this will help with interest and making the metal more affordable.

Oh, and put 'The_Beast Switch Tool' in the title and the thread will get a lot more traffic.  :P
Logged

Offline eyesmiles

  • Posts: 303
  • Location: San Francisco Bay Area
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #66 on: Fri, 03 January 2014, 19:32:19 »
In for a set of tools and a 1.5x plate (possibly a plate for Pure layout as well) good sirs.
Logged

Offline joneslee85

  • HHKB Scrub JP
  • Posts: 399
  • Location: Sydney, Australia
  • Professional Rubyist programmer!
    • Ruby Journal
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #67 on: Fri, 03 January 2014, 19:38:20 »
I am interested in:

1x hhkb layout
1x poker layout

Would love to see more details
Logged
TOO MANY KEYBOARDS THAT I COULD NOT COUNT! BUT I AM STILL USING MY MODEL F77

Offline lilky

  • Posts: 110
  • Location: East Coast, USA
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #68 on: Sat, 04 January 2014, 12:54:32 »
I am very very in for a switch tool.
Logged

Offline BunnyLake

  • The OG HHKB Master
  • Posts: 7236
  • X
    • [CTRL]ALT
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #69 on: Sat, 04 January 2014, 13:18:00 »
totally missed this but im in with bells on
Logged
I'M IN THE PROCESS OF MOVING RIGHT NOW, WILL BE BACK AROUND SOON

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #70 on: Sat, 04 January 2014, 16:34:21 »
the switch tools should be pretty plug and play. the plates are experimental. large plates are even more experimental. the point of this exercise is to have fun with a cool new material. keep that in mind.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #71 on: Sat, 04 January 2014, 16:34:52 »
also keep in mind that this material is really expensive.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #72 on: Sat, 04 January 2014, 17:11:18 »
I guessed it would be more than the aluminum ones.

Can you give an estimate on how much more they will cost?
Logged

Offline jorgenslee

  • Posts: 369
  • Location: Philippines
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #73 on: Sat, 04 January 2014, 20:43:27 »
Quote from: mkawa on Sat, 04 January 2014, 16:34:52
also keep in mind that this material is really expensive.

asssuming one sheet of this material to be cut only with switch tools, can you give a rough estimate on how much would a single switch tool cost?
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #74 on: Sat, 04 January 2014, 20:57:49 »
Quote from: jorgenslee on Sat, 04 January 2014, 20:43:27
Quote from: mkawa on Sat, 04 January 2014, 16:34:52
also keep in mind that this material is really expensive.

asssuming one sheet of this material to be cut only with switch tools, can you give a rough estimate on how much would a single switch tool cost?

Switch tools are just going to be fillers since they are small. Plates are the main thing being cut
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #75 on: Sun, 05 January 2014, 12:28:26 »
Quote from: jorgenslee on Sat, 04 January 2014, 20:43:27
Quote from: mkawa on Sat, 04 January 2014, 16:34:52
also keep in mind that this material is really expensive.

asssuming one sheet of this material to be cut only with switch tools, can you give a rough estimate on how much would a single switch tool cost?
no, we can't. the laser has never cut Ti before and the cutting shop has absolutely no idea what tolerances, setup time and rough finishing it going to cost or look it.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline CPTBadAss

  • Woke up like this
  • Posts: 14364
    • Tactile Zine
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #76 on: Sun, 05 January 2014, 13:44:48 »
I'd like some switch tools more than plates. I'd rather get in on R2 when any bumps are ironed out.
Logged

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11461
  • Location: WI
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #77 on: Mon, 06 January 2014, 02:24:23 »
I'll be in for switch tools and probably in for a plate depending on price.
Logged

Offline ethankz750

  • Posts: 5
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #78 on: Mon, 06 January 2014, 07:09:22 »
mmm, a titanium poker II plate sounds fantastic. I'm down.
Logged

Offline lucifurburch

  • Posts: 38
Re: [IC] - Aerospace grade titanium 60% plates
« Reply #79 on: Mon, 06 January 2014, 17:32:43 »
I'm defiantly in for a ANSI 1.25x/Poker plate but would LOVE it if i could also get a tkl plate
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #80 on: Mon, 06 January 2014, 17:58:38 »
Check the OP, quotes are in
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Psybin

  • of Rallos Zek
  • Posts: 620
  • Location: Merica
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #81 on: Mon, 06 January 2014, 18:09:14 »
In for tools!
Logged

Offline ethankz750

  • Posts: 5
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #82 on: Tue, 07 January 2014, 10:10:45 »
What is the finish going to be? Are there going to be options like brushed or sand-blasted?
Logged

Offline mkawa

  •  No Marketplace Access
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #83 on: Tue, 07 January 2014, 10:19:39 »
the finish will be something like a 4B matte. no options, as we aren't sending anything to a finishing shop as most finishing shops will not deal with titanium and the cost would be very large
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #84 on: Tue, 07 January 2014, 10:20:11 »
Quote from: The_Beast on Mon, 06 January 2014, 17:58:38
Check the OP, quotes are in

Thanks for the quote!

I'd be in for one with the "ANSI 1.5x with short R-shift" layout from the GH60 buy.


Logged

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1304
  • Location: US: Virginia
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #85 on: Tue, 07 January 2014, 10:29:54 »
I'm in for one of the GH60 Universal 10x spacebar versions.

« Last Edit: Wed, 08 January 2014, 06:18:37 by Tarzan »
Logged

Offline JaccoW

  • Fire Typer!!
  • * Elevated Elder
  • Posts: 2003
  • Keyboard is Lava!
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #86 on: Tue, 07 January 2014, 10:52:40 »
Anyone know where to have a plate for a FC660M designed?

Still in if I can get them from somewhere.

Titanium is awesome when anodized btw:


Logged
|||Daily driver: Duck Orion TKL
|||My other keyboards :
More
|||The Original|Home|Work|Numpad|Play|Endgame|Keycaps
x
|Déck Legend Frost|Keycool 87 LE|Leopold FC660M|FC 210TP|Raptor K1 Gaming|Duck Orion TKL|My keycaps & sets
|Pics|Pics|Pics|Pics|Pics|Pics

|||Want to know what Keycap stores there are? Check out my Keyboard Pearltree and my (FS/FT/WTB) thread

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1304
  • Location: US: Virginia
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #87 on: Tue, 07 January 2014, 10:58:44 »
Quote from: JaccoW on Tue, 07 January 2014, 10:52:40
Anyone know where to have a plate for a FC660M designed?

Still in if I can get them from somewhere.

Titanium is awesome when anodized btw:
Show Image


I was thinking of trying to anodize the titanium plate, I've seen some small items made of titanium that were absolutely gorgeous in a multi-colored green/purple hue.  One of my garage sale finds last year was a regulated DC power supply, sounds like exactly what I'd need to try making hydrogen bombs colored titanium at home.
Logged

Offline Melanic

  • Posts: 71
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #88 on: Tue, 07 January 2014, 12:19:05 »
Hello,

I'd be interested in a set of tools.
Logged

Offline AKmalamute

  • HHKB Scrub
  • Posts: 837
  • Location: Western WA, USA
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #89 on: Tue, 07 January 2014, 12:29:35 »
Thanks for the price update; any idea how steep the programming fee is? ...Since I think I'm the only one here looking for a 60% ALPS board ...

Still idling in the 'broke but interested' category.
Logged

HHKB-lite2, Dvorak user

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #90 on: Tue, 07 January 2014, 14:06:39 »
Quote from: AKmalamute on Tue, 07 January 2014, 12:29:35
Thanks for the price update; any idea how steep the programming fee is? ...Since I think I'm the only one here looking for a 60% ALPS board ...

Still idling in the 'broke but interested' category.

Programming is in that $75 per plate
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #91 on: Tue, 07 January 2014, 15:07:41 »
40% TI alps plate plox?
Logged

Offline fart_toast

  • Posts: 103
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #92 on: Tue, 07 January 2014, 15:44:04 »
Someone reading this may be able to help...

I would like to get a plate which allows you to take the tops of switches off without desoldering each time. I know they exist but I don't know how they differ from a standard plate? Are they manufactured completely differently or just with extra holes where you would press to remove the switch tops?

Ideally a 60% ISO poker 2 plate that does this would be my ideal plate :)
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #93 on: Tue, 07 January 2014, 15:47:00 »
Quote from: fart_toast on Tue, 07 January 2014, 15:44:04
Someone reading this may be able to help...

I would like to get a plate which allows you to take the tops of switches off without desoldering each time. I know they exist but I don't know how they differ from a standard plate? Are they manufactured completely differently or just with extra holes where you would press to remove the switch tops?

Ideally a 60% ISO poker 2 plate that does this would be my ideal plate :)

The plates being discussed here will allow for switch top removal.
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #94 on: Tue, 07 January 2014, 15:47:18 »
Quote from: The_Beast on Fri, 03 January 2014, 12:57:53
Yes, as all the other plates I have ran, they will allow for switch top removal

Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #95 on: Tue, 07 January 2014, 16:54:44 »
First 8 to confirm interest get on the first sheet
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |

Offline JonasDK

  • Posts: 141
  • Location: Denmark
  • Let me poo on you
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #96 on: Tue, 07 January 2014, 16:55:39 »
Quote from: The_Beast on Tue, 07 January 2014, 16:54:44
First 8 to confirm interest get on the first sheet
Plates or tools?
Logged

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #97 on: Tue, 07 January 2014, 16:58:45 »
How confident is your laser guy that these will work out well? I know there's some risk involved because this is a new thing, but if there's some significant chance that this first batch will be messy I'd rather wait.

If you're feeling good about it, I'm confirming for this layout:

Quote from: riotonthebay on Tue, 07 January 2014, 10:20:11
I'd be in for one with the "ANSI 1.5x with short R-shift" layout from the GH60 buy.

Show Image

Show Image


I'm not in for switch tools though. Already have a set ;).
Logged

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #98 on: Tue, 07 January 2014, 17:01:11 »
Also, presumably CONUS shipping will be something like $12?
Logged

Offline The_Beast

  • * Maker
  • Thread Starter
  • Posts: 3964
  • Location: Wisconsin
  • I like wood ಠ_๏
Re: [IC] - Aerospace grade titanium 60% plates - Quote in
« Reply #99 on: Tue, 07 January 2014, 17:03:40 »
Quote from: riotonthebay on Tue, 07 January 2014, 16:58:45
How confident is your laser guy that these will work out well? I know there's some risk involved because this is a new thing, but if there's some significant chance that this first batch will be messy I'd rather wait.

If you're feeling good about it, I'm confirming for this layout:

Quote from: riotonthebay on Tue, 07 January 2014, 10:20:11
I'd be in for one with the "ANSI 1.5x with short R-shift" layout from the GH60 buy.

Show Image

Show Image


I'm not in for switch tools though. Already have a set ;).

I'm not really sure...



Quote from: riotonthebay on Tue, 07 January 2014, 16:58:45
How confident is your laser guy that these will work out well? I know there's some risk involved because this is a new thing, but if there's some significant chance that this first batch will be messy I'd rather wait.

If you're feeling good about it, I'm confirming for this layout:

Quote from: riotonthebay on Tue, 07 January 2014, 10:20:11
I'd be in for one with the "ANSI 1.5x with short R-shift" layout from the GH60 buy.

Show Image

Show Image


I'm not in for switch tools though. Already have a set ;).

Quote from: JonasDK on Tue, 07 January 2014, 16:55:39
Quote from: The_Beast on Tue, 07 January 2014, 16:54:44
First 8 to confirm interest get on the first sheet
Plates or tools?

Plates, tools are just a second thought to fill space/scrap

Quote from: riotonthebay on Tue, 07 January 2014, 17:01:11
Also, presumably CONUS shipping will be something like $12?

something like that.
Logged
Vendor Status: Sadly, not taking any orders/pre-orders at this time
Vendor Quick Links: | Vendor Forum | Hardwood Wrist Rests | Hardwood 60% Cases | Customer Gallery | Giveaway |
Pages: « 1 [2] 3 4 5 »   Go Up
« previous next »