Using Easy AVR on Hand wired matrix/Enablers matrix

[Melvang]

Is there any chance we can get a repository for existing PCB's trace layouts that the Easy AVR firmware tool works for so that individuals can use it on hand wired matrix boards? 

IE I want to use it for a hand wired TKL board so I would need to match rows, and columns to the correct pins for say a phantom but I don't have a phantom to look at to trace.

Just looking for say a spreadsheet that has the correct keys in the rows/columns with the corresponding pins at the teensy for each one. 

Would the be out of the realm of possibility/would it not really work this way? 

If it would work I would like to get at least one example of each physical layout that the software works for. 

Also, are there any 105 key layouts this software works with? 

[Igthorn]

http://www.pjrc.com/teensy/card2a.pdf

http://deskthority.net/w/images/6/6d/Phantom_schematic.pdf

Also from matrix.c in the TMK phantom config:

Code: [Select]

/* Row pin configuration
 * row: 0   1   2   3   4   5
 * pin: B5  B4  B3  B2  B1  B0
 */

/* Column pin configuration
 * col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13  14  15  16
 * pin: D5  C7  C6  D4  D0  E6  F0  F1  F4  F5  F6  F7  D7  D6  D1  D2  D3
 */
So just add a P to each pin and you have the labels for the pins on the teensy 2.

--

The only 104/5 keyboards that Easy AVR supports seems to be Kitten Paw in Filco fullsize and Black Petal in Rosewill RK-9000, but those use additional chips.

[Melvang]

Alright so basically I am ok using that software for hand matrix setups on TKL with no issues but not for full sized. 

[berserkfan]

I currently have a dissembled Access-IS and a Deck Legend so I can take photos of their PCB if that might help. But I confess that sounds weird since almost nobody uses these keyboards and hardly anybody would benefit from my information.

[dorkvader]

I thought metalliqaz' firmware only supported known layouts that he has to add-in? That's why I had been using soarer's firmware for matrix and hand-wired layouts. (TMK is another option)

if he ever adds support for arbitrary-size square matrix, I'd use it all the time!

I currently have a dissembled Access-IS and a Deck Legend so I can take photos of their PCB if that might help. But I confess that sounds weird since almost nobody uses these keyboards and hardly anybody would benefit from my information.

Just in case I photograph everything.