(https://i.imgur.com/0v7bpum.png)
ABOUT
Mint is a keycap set derived from Memories, Memories was a keycap set I designed containing 2 different color schemes, the other one Cotton Candy.
After all the feedback I have decided to fully work on Mint.
I currently have a few interested vendors and we will use EPBT as manufacturer!
Novelties and Deskmat coming NEXT WEEK!
Interest Check Google Form (https://forms.gle/TvAPwgQcvPX1HP7y9)
KITS
Please note kits might be removed if not enough interest is shown for them, fill in the interest form!
(https://i.imgur.com/nrtAuTw.png)
(https://i.imgur.com/0nLzjCA.png)
(https://i.imgur.com/IpTHbLT.png)
(https://i.imgur.com/odeLrKo.png)
(https://i.imgur.com/cck7ADr.png)
(https://i.imgur.com/3QLbhbK.png)
(https://i.imgur.com/dqTCQRF.png)
(https://i.imgur.com/VfUqilb.png)
(https://i.imgur.com/PbKB5Qg.png)
(https://i.imgur.com/QUjtDSx.png)
(https://i.imgur.com/Ywu9eEG.png)
BOARD RENDERS
M65-A
(https://i.imgur.com/5jYoOCq.png)
LEOPOLD FC660M
(https://i.imgur.com/pKPUgho.jpg)
LEOPOLD FC660M
(https://i.imgur.com/nJDMcUX.jpg)
Interest Check Google Form (https://forms.gle/TvAPwgQcvPX1HP7y9)
TO DO LIST
Wait for novelties and deskmat
New renders
SHOUTOUTS
Everyone who gave feedback on Memories.
Everyone who is interested.
SUPPORT THE SET
You can support the set by putting this as your signature
[url=https://geekhack.org/index.php?topic=104087.0][img width=500]https://i.imgur.com/0v7bpum.png[/img][/url]
Updates
03.01.2020
Interest Check Created
Added international kits
04.01.2020
Fixed international kit
07.01.2020
Updated French Kit
res[/url])Added Colevrak Kit (Read disclaimer above Kits section)
09.01.2020
Made a banner
16.01.2020
Updated Colevrak & French Kit
Novelties and Deskmat Coming Next Week!
First of all thanks for doing a French Kit, it's very much appreciated in a hobby that is so ANSI-Centric.
Renders seem to be Cherry Profile, what manufacturer will be used for Cherry Profile PBT ?
What legends will you use ? Will they be dye-sublimated ?
Since we're talking Azerty, I have a few corrections on the French kit.
Show Image
(https://i.imgur.com/P90EXgT.png)
Few keys have a third sub-legend, they don't appear on your kit. Also a few keys need to be lowercase.
See the correct keys I put in the picture.
Here's a French keyboard with correct legend.
Show Image
(http://i.imgur.com/GysYc6Y.jpg)
I'm only talking about the French portion of your kit. I hope The belgian portion is correct.
EDIT : Also you need AltGr keycaps and possibly Legend only Modifiers to be attractive to the ISO community.
+1, as Azhdar: thanks for offering another french kit, it is very much appreciated. Hope you can make the needed corrections mentioned.
First of all thanks for doing a French Kit, it's very much appreciated in a hobby that is so ANSI-Centric.
Renders seem to be Cherry Profile, what manufacturer will be used for Cherry Profile PBT ?
What legends will you use ? Will they be dye-sublimated ?
Since we're talking Azerty, I have a few corrections on the French kit.
Show Image
(https://i.imgur.com/P90EXgT.png)
Few keys have a third sub-legend, they don't appear on your kit. Also a few keys need to be lowercase.
See the correct keys I put in the picture.
Here's a French keyboard with correct legend.
Show Image
(http://i.imgur.com/GysYc6Y.jpg)
I'm only talking about the French portion of your kit. I hope The belgian portion is correct.
EDIT : Also you need AltGr keycaps and possibly Legend only Modifiers to be attractive to the ISO community.
I will take these comments in to mind and change the kit!
As for manufacturer we are currently looking at KAT however I still need to get renders for KAT profile.
Thanks for the interest!
I recommend changing the backspace in the Colevrak kit to modifier color.
Also, if you add the highlighted keycaps below it will exactly match the Colevrak+ kits in at least six upcoming KAT sets: Atlantis, Explosion, Goddess, Lich, Oasis, and Lucky Jade.
You can find details here (https://geekhack.org/index.php?topic=101187.msg2786467#msg2786467) about the alternative layouts this would then cover.
Show Image
(https://i.imgur.com/rLb16mO.png)
Thanks I'll make sure to update the kit
I recommend changing the backspace in the Colevrak kit to modifier color.
Also, if you add the highlighted keycaps below it will exactly match the Colevrak+ kits in at least six upcoming KAT sets: Atlantis, Explosion, Goddess, Lich, Oasis, and Lucky Jade.
You can find details here (https://geekhack.org/index.php?topic=101187.msg2786467#msg2786467) about the alternative layouts this would then cover.
Show Image
(https://i.imgur.com/rLb16mO.png)
Updated the kit, thanks for the feedback