Author Topic: [GB] TGR-910 CE - 100% Completed.  (Read 257344 times)

0 Members and 1 Guest are viewing this topic.

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #900 on: Thu, 01 November 2018, 17:02:28 »
Sweet. Yea that chip comes with it. Any suggestions for the leds?

Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!

Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time I’m building and no clue what to do/how to install the rgb kit. I don’t even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser

and a rgb controller chip

im not sure of part no but i think it's in the op

Offline vonswoopington

  • Posts: 187
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #901 on: Thu, 01 November 2018, 22:29:46 »
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?
TGR 910 Polycarb | TGR Alice | TGR Unikorn | Lyn EM-7 | VE.A | Kyuu | E7-V1

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1176
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #902 on: Thu, 01 November 2018, 23:38:43 »
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?
I will be sending one with dantambok's stuff for you. <3
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger | FMJ80 | KFE

Offline vonswoopington

  • Posts: 187
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #903 on: Thu, 01 November 2018, 23:40:02 »
Is there any way to buy an additional brass logo insert for the top right corner of the 910 polycarbonate? Does anyone have an extra one they are willing to sell?
I will be sending one with dantambok's stuff for you. <3

Thank you both!
TGR 910 Polycarb | TGR Alice | TGR Unikorn | Lyn EM-7 | VE.A | Kyuu | E7-V1

Offline gabbbe

  • Posts: 86
  • Location: Brooklyn, NY
[GB] TGR-910 CE - 100% Completed.
« Reply #904 on: Fri, 22 February 2019, 22:41:26 »
Is there someone out there that have a sparing 910 pcb and willing to sell?
« Last Edit: Sat, 23 February 2019, 09:16:34 by gabbbe »

Offline fleeceman

  • Posts: 130
  • Location: UK
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #905 on: Sat, 21 September 2019, 18:09:57 »
Strange request but can anyone tell me the screw size that fastens the weight to the bottom case? Mine are A2-70 and it seems too short.

Offline vaughno

  • Posts: 70
  • Location: Virginia, USA
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #906 on: Fri, 27 September 2019, 10:23:46 »
tgr 910 v2


Sent from my iPhone using Tapatalk
Unikorn | Orion v3 | GSKT-00

Offline LightningXI

  • * Elevated Elder
  • Posts: 4279
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #907 on: Fri, 27 September 2019, 12:08:55 »
tgr 910 v2


Sent from my iPhone using Tapatalk

wat

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 718
  • Location: US
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #908 on: Fri, 27 September 2019, 12:15:40 »
tgr 910 v2


Sent from my iPhone using Tapatalk

wat

Prime example of a polite way to request an R2 lol
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline LightningXI

  • * Elevated Elder
  • Posts: 4279
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #909 on: Fri, 27 September 2019, 12:22:21 »
tgr 910 v2


Sent from my iPhone using Tapatalk

wat

Prime example of a polite way to request an R2 lol

Thanks for your diagnosis, Dr. Auxo.

Offline tedkeyboards

  • Posts: 7
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #910 on: Fri, 20 March 2020, 21:12:17 »
Is this ever going to run again?

Offline eyedrop

  • Posts: 601
  • Location: Keeb Abyss
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #911 on: Sat, 21 March 2020, 12:17:22 »
Is this ever going to run again?
Highly unlikely, but I have been proven wrong.  Your best bet would be aftermarket.  Good luck!

Sent from my Pixel 3 using Tapatalk


Offline iNViSiBiLiTi

  • Posts: 214
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #912 on: Wed, 25 March 2020, 21:53:31 »
Is this ever going to run again?



just remember Sam's ran 910 5 times thus far: R1, SE, CE, RE, VKC.
60%: Prophet, GSKT-00 x2, Poly GSKT-00-Z, Weaven, Sangeo60, Unikorn R2.1, Ciel60

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Igris V1, LZ-GHv2

Bulgogi Board (VA104M), Belle En Rose

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #913 on: Mon, 27 April 2020, 23:35:20 »
910 CE has now been ported to QMK =)
https://config.qmk.fm/#/tgr/910ce/LAYOUT_65_ansi_blocker

VIA support coming shortly!

Offline oldcat

  • Posts: 2640
  • Location: US
  • 65% is Life
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #914 on: Tue, 28 April 2020, 00:04:08 »
910 CE has now been ported to QMK =)
https://config.qmk.fm/#/tgr/910ce/LAYOUT_65_ansi_blocker

VIA support coming shortly!

Amazing, as always!

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #915 on: Tue, 28 April 2020, 10:58:09 »
VIA is now also supported. The merge went quicker than expected!

Offline reconsiderit

  • Posts: 546
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #916 on: Tue, 05 May 2020, 02:25:45 »
Is this for the quadcube PCB?

Also, is this the same PCB as R2 RE?
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline merlin64

  • Posts: 1273
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #917 on: Fri, 08 May 2020, 12:07:18 »
It is for the PCB labeled TGR-Unicorn PCB v1.2 whichever pcb that is.

Offline LightningXI

  • * Elevated Elder
  • Posts: 4279
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #918 on: Sat, 09 May 2020, 07:05:09 »
Is this for the quadcube PCB?

Also, is this the same PCB as R2 RE?
It's this PCB:




Offline i_tekneek

  • Posts: 11
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #919 on: Wed, 22 July 2020, 10:36:19 »
Does anyone seem to have the original plate files? I saw yuktsis link was dead and wanted to try some fun materials. Any help would be greatly appreciated!