Do you have a list of all possible layouts? Or is it fixed layout only?
Is the cable included in the price ?
Is it possible to order without the label in the top left?
Standard 60% PCBs and plates would also fit?
How is the cabel part done? Extension cord?
Was there no interest check for this before? It's interesting and cool, but it's so sudden.
How about the PCB / plate? Do normal standard ones fit?Standard 60% PCBs and plates would also fit?
How is the cabel part done? Extension cord?
The cord is detachable and mini B.
Sadly it's only a tray mount case, nothing for me at that price..
Why does it say the group buy is for two weeks, but the time frame given is only one week?
Will there ever be a 65% version of this?
Sent from my Pixel 2 XL using Tapatalk
Additional PCB/plate would be a nice option.
Do you have a list of all possible layouts? Or is it fixed layout only?Show Image(https://s1.ax1x.com/2018/07/19/P39Kc6.png)Show Image(https://s1.ax1x.com/2018/07/19/P39lnO.png)Show Image(https://s1.ax1x.com/2018/07/19/P393He.png)Show Image(https://s1.ax1x.com/2018/07/19/P39N9I.png)
Currently ,there are four layouts available.
That's just an IC from a member.Ok, so he just copied the pic from kbfans.cn. But I guess, the pic is from a previous run of the same case offered here.
Now it gets confusing. Massdrop posting about this or a future F62-PE case:https://www.massdrop.com/talk/8823/any-interest-for-a-f-62-pe-group-buy-through-massdrop (https://www.massdrop.com/talk/8823/any-interest-for-a-f-62-pe-group-buy-through-massdrop)
Same or different one? Standard 60% support would be nice.
Some pictures of the internals would be cool. Would help me to decide buying it or not.
Some links I found:Nice, thank you for sharing these. :thumb:
http://www.geekmaker.com/index/Goods/goodsInfo/id/299/item_id/1800.html
https://deskthority.net/for-sale-f55/f62pe-custom-mechanical-keyboard-t19315.html
https://m.zfrontier.com/post/detail/4813
http://kbdlab.co.kr/index.php?document_srl=5250867&mid=board_Lsno50
Any chance of getting some answers to the open questions?
Are there pictures or renders of the other colors besides black? Also is there any potential option for a beige or off white finish?
Is the PCB used the DZ60? That was listed as the pcb on an older version that was for sale. Does that imply that standard 60% will fit? If not, what is specifically stopping the standard 60percent pcb from working?
Also how many attachment points or screws are used to attach the pcb and case and plate? Your keyboard layouts look like only three attachment points? Maybe that’s just a bad picture.
How does the wire work? As it appears there is a gap from the top of the pcb to the top of the case. Is there an extension with a female usb-B flush with the case? Or does the removable cable connect to pcb and gets routed directly out of the case? Does that mean you have to open the case to change the cable?
Sorry, did not saw the update in the OP in regards to the PCB/plate. I added my options to the comments field, hope this is fine.
Thanks a lot. Looking forward to the case. :thumb:
Got a hold of OP. He was aiming to start shipping next week.Show Image(https://i.imgur.com/1qQth09.jpg)Show Image(https://i.imgur.com/3cZgVCl.jpg)
Just received mine out of the blue. Quality is good except for some minor streaking and chipped edge of the top bar. Really look very impressive IRL. The most Heavy 60% I have seen. The cable connector and LED need to solder onto PCB via jumper wire included.
Some links I found:Nice, thank you for sharing these. :thumb:
http://www.geekmaker.com/index/Goods/goodsInfo/id/299/item_id/1800.html
https://deskthority.net/for-sale-f55/f62pe-custom-mechanical-keyboard-t19315.html
https://m.zfrontier.com/post/detail/4813
http://kbdlab.co.kr/index.php?document_srl=5250867&mid=board_Lsno50
Update: Looking at this picShow Image(https://deskthority.net/resources/image/47846)
Wondering why non standard 60 % PCB would not fit. Some of the mount points look very similar. Is this a change to the case for this run?
I have no problem buying a nice PCB with this case, just for future proofing it, having an option for replacement PCBs would we nice.
Show Image(https://i.imgur.com/7V0fPxT.jpg)
Received today! What a beast :D
OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60 (https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60)
Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout. :D
Found the same problem 5 minutes ago. If you want to do a split space layout you need to switch the K45 and K48 with the KC_NO next to these. My fork is here: https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60 (https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60)OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60 (https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60)
Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout. :D
Even though the board says it's a DC60, the matrix isn't exactly the same as the alf/dc60. There's an extra switch in R4 of the matrix to support a 2u left shift with arrows layout. The extra switch gave me issues when trying to flash an ANSI 60% with split right shift layout.
I modified the QMK source and it works for me now.
Found the same problem 5 minutes ago. If you want to do a split space layout you need to switch the K45 and K48 with the KC_NO next to these. My fork is here: https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60 (https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60)OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60 (https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60)
Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout. :D
Even though the board says it's a DC60, the matrix isn't exactly the same as the alf/dc60. There's an extra switch in R4 of the matrix to support a 2u left shift with arrows layout. The extra switch gave me issues when trying to flash an ANSI 60% with split right shift layout.
I modified the QMK source and it works for me now.
Works now. :) (after patching, PCB was missing diodes and holes for ESC key where for LED pins, etc. not best quality IMHO)
Aaargh, I missed this GB. Are there extras that will be put up for sale?
They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.Aaargh, I missed this GB. Are there extras that will be put up for sale?
Missed this GB as well. Any news on extras? Or will there be a round 2?
They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.Aaargh, I missed this GB. Are there extras that will be put up for sale?
Missed this GB as well. Any news on extras? Or will there be a round 2?
I was in contact, took more than a month to get to the conclusion that they don't have my ordered plates and additional PCP. At least I got a refund. So not real harm done.They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.Aaargh, I missed this GB. Are there extras that will be put up for sale?
Missed this GB as well. Any news on extras? Or will there be a round 2?
Good luck getting in touch with either the OP or Geekmaker.
Well, I still haven't received mine... It is quite frustrating.
The case is awesome, I really like it. Very well made. Rock solid and mine has no flaws, but PCB quality is crap.
Communication during the hole GB sucked. Others take a bigger interest in the people buying their high priced stuff. Would need an unbelievable beautiful case to make me join a Geekmaker GB again. This is an expensive hobby and should be fun, not frustration.
Just my 2c.
Thanks for the suggestion. I did email him before and he has responded a couple of times but I still got no info about when my order will be shipped.Well, I still haven't received mine... It is quite frustrating.
If you still have time, I would recommend opening a PayPal dispute. That was the only way I could get any sort of response from Geekmaker. You could also try emailing geekmaker.sy@foxmail.com. That was the address that I got a response from.
Does USB-C to USB-C work for anybody? Got only A to C working.
Does USB-C to USB-C work for anybody? Got only A to C working.
I only have a USB-A to C cable. But I have a USB-C to USB-C cable on order from Zap Cables, so I'm about to run into the same problem you have.
Thanks for sharing. Good to know. I use the same cable with a Lets Split and it works. Will check my wiring in the case.Does USB-C to USB-C work for anybody? Got only A to C working.
I only have a USB-A to C cable. But I have a USB-C to USB-C cable on order from Zap Cables, so I'm about to run into the same problem you have.
I just got a USB-C to USB-C cable from Zap Cables and the board works fine with it. The USB-C connector spec seems like kind of a cluster to me, is there a chance you're using the wrong type of USB-C to USB-C?
Thanks for the suggestion. I did email him before and he has responded a couple of times but I still got no info about when my order will be shipped.Well, I still haven't received mine... It is quite frustrating.
If you still have time, I would recommend opening a PayPal dispute. That was the only way I could get any sort of response from Geekmaker. You could also try emailing geekmaker.sy@foxmail.com. That was the address that I got a response from.
Finally received mine! Louis, a friend of ALF, emailed me and offered to send a white one with a brass plate upgrade instead since there was some QC issues with the black I ordered. Less than a week later, the package arrived. It is a really nice keyboard and I'm very happy with it :)
Is this tray mount?Yes, it is. But not a standard 60% PCB, due to not enough space inside for the connector.
Sent from my SM-G975F using Tapatalk