[url=https://geekhack.org/index.php?topic=75963.0][img width=320 height=120]http://i.imgur.com/sykc7co.png[/img][/url]
It is an interesting design, it is probably too colorful for a boring Joe like me though. If it has some boring Joe options, well, maybe???
It is an interesting design, it is probably too colorful for a boring Joe like me though. If it has some boring Joe options, well, maybe???
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)Show Image(http://i.imgur.com/QbWNgrv.png)
It is an interesting design, it is probably too colorful for a boring Joe like me though. If it has some boring Joe options, well, maybe???
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)Show Image(http://i.imgur.com/QbWNgrv.png)
Not bad, at all.
Those novelties are awesome.
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...
Anyone can run an IC as they please, but they may not necessarily get the GB thread approved.
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)
I like this design a lot :) One of the few really colourful sets I'd actually put on my boards.
Just a design note: DSA does not have a semi-matte option, all keycap sizes are matte finish only (except for relegendables).
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)
This option would be awesome.
I'm definitely interested in the set.
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)
This option would be awesome.
I'm definitely interested in the set.
That option might be a little more difficult to do. BUT I've noticed that there are two groups of people who like this set so what I could do is either add a second WV number row and a green Enter key or provide a base kit with no number row and then choose one (blue or white).
What do you guys think about it?
EDIT:Show Image(http://i.imgur.com/i6aVoXZ.png)
Something like this?Show Image(http://i.imgur.com/hHZ2ZTz.png)
This option would be awesome.
I'm definitely interested in the set.
That option might be a little more difficult to do. BUT I've noticed that there are two groups of people who like this set so what I could do is either add a second WV number row and a green Enter key or provide a base kit with no number row and then choose one (blue or white).
What do you guys think about it?
EDIT:Show Image(http://i.imgur.com/i6aVoXZ.png)
Probably would prefer an option to add a WV number row if that makes it easier. Does the "Novelties Kit" come with a green Ground Control key?
i like this set a lot! and the newer colorway is so good. i like the novelties a lot! definitely interested.
The regular Joe version looks good; however, I am not sure if DSA is pulling enough attention lately, though, judging for the low count of votes. As GMK or JTK will require much higher MoQs the Cherry profile may attract more people. Just some yellow flags.
i like this set a lot! and the newer colorway is so good. i like the novelties a lot! definitely interested.
I'm glad you liked the newer colorway but the blue number row will probably be in a kit as well as the red enter and yellow back space. That way everybody we could have 3 styles for just one set!The regular Joe version looks good; however, I am not sure if DSA is pulling enough attention lately, though, judging for the low count of votes. As GMK or JTK will require much higher MoQs the Cherry profile may attract more people. Just some yellow flags.
Well, it was designed as a DSA set because those keyboards use this profile. In addition, I wanted to make it more accessible to Dvorak/Colemak and ISO distributions. However, if the community prefers a DCS or SA profile, I will gladly change it.Show Image(http://i.imgur.com/5eMlixW.jpg)
One more thing, I am currently designing the set again from scratch, which means new renders, revised kits and probably novelties. Here is a sneak peakShow Image(http://i.imgur.com/VFWkSyx.png)Show Image(http://i.imgur.com/aQFFCBZ.png)Show Image(http://i.imgur.com/xMDr9If.png)Show Image(http://i.imgur.com/dNCrl0E.png)
I was not aware that these devices carry DSA style caps, I just hope the GB makes it. Awesome new combinations.
I was not aware that these devices carry DSA style caps, I just hope the GB makes it. Awesome new combinations.
To be honest, the set didn't draw as much attention as I thought but many people said "I like it but..." which really means that it needed to be polished. That's why I decided to start over again and (hopefully) post the V2 of the set either today or tomorrow.
Soon after the V2 of the set and reformat the current IC is up, I will post a google doc or something similar so we know which profile do people prefer for the set, International kit, ergodox, planck...
The lack of interest may be related with other factors, like the profile, or even the manufacturer. DCS and DSA profiles by SP are know to be thin, and not much liked around recently, DS appears to be in its hypest season recently.
In my case, after trying all profiles available for MX switches, I learned that I prefer the Cherry profile, in thick ABS; so, I would get into a GB for different profiles due to solidarity, but not really because I would use it. I think some of the elders around here have already settled with certain profiles for caps.
The lack of interest may be related with other factors, like the profile, or even the manufacturer. DCS and DSA profiles by SP are know to be thin, and not much liked around recently, DS appears to be in its hypest season recently.
In my case, after trying all profiles available for MX switches, I learned that I prefer the Cherry profile, in thick ABS; so, I would get into a GB for different profiles due to solidarity, but not really because I would use it. I think some of the elders around here have already settled with certain profiles for caps.
The profile dilemma is huge! So far people have suggested me DCS, SA, R3 SA (like Danger Zone)...
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...
Here is my 2 cents on the profile subject...
First, let me just mention Sculpted SA is my favorite SP profile. BUT, as a designer as well I know the profile really is/can be made an integral part of the overall set and theme. Personally DSA really seems to be the most fitting profile, thematically speaking. After doing a little research on the keyboards that you are basing this on...Show Image(http://www.airport-suppliers.com/content_images/supplier/Airport_Wedge_Devices_ATC_Check_In_Keyboards_OCR_Readers_Document_Scanner.jpg)Show Image(http://www.diakonsolutions.com/atcuseit/images/StarsInputs2.JPG)
...it would seem DSA is the most obvious choice, as the actual keyboards have a profile very similar to DSA from what I can tell. There is also the fact that this will make a lot of the child deals much cheaper (I know Colemak/Dvorak support is important to you) because you don't have to worry about Rows in the design. DSA also gives you more options on material/legend tech than say SA would as well.
Finally, I think its great that you are reaching out to the community for input on this! I will encourage you though to stick to your guns when you make a decision, especially if you think it is essential to the design in some way. Just remember that you cant make everyone happy ;)
On that note, you are more than welcome to copy or base child deals off jukebox ones. There are always things to add, or that you may not need (as mine was sculpted) but just so you know thats totally fine with me :thumb:
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...
Anyone can run an IC as they please, but they may not necessarily get the GB thread approved.
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...
Anyone can run an IC as they please, but they may not necessarily get the GB thread approved.
Who cares because you don't need to lick anyone's hole on Geekhack anymore, just post it on MassDrop and watch the numbers pile on in :thumb: .
About time that everyone has real freedom to come up with their own colour-ways as they see fit without having to seek anyone's approval anymore, welcome to the new world order and it belongs to MD ;) .
Hey,
the update is looking great, but it lost planck grid support :eek: if it had grid support I'd be all in :)
Hey,
the update is looking great, but it lost planck grid support :eek: if it had grid support I'd be all in :)
A cream colored 1u would be make it perfect :thumb:Hey,
the update is looking great, but it lost planck grid support :eek: if it had grid support I'd be all in :)
Ok, I think now is fixedShow Image(http://i.imgur.com/4078hTw.png)
What do you think?
A cream colored 1u would be make it perfect :thumb:Hey,
the update is looking great, but it lost planck grid support :eek: if it had grid support I'd be all in :)
Ok, I think now is fixedShow Image(http://i.imgur.com/4078hTw.png)
What do you think?
A cream colored 1u would be make it perfect :thumb:Hey,
the update is looking great, but it lost planck grid support :eek: if it had grid support I'd be all in :)
Ok, I think now is fixedShow Image(http://i.imgur.com/4078hTw.png)
What do you think?
I was thinking about changing one of the green 1U caps for a 1U WV.
Please do! (and maybe even make two of the 1us WV, I'm fine with one but 2 1u WVs might appease for potential planck grid buyer)
Also I agree with LSB that this set would probably work the best unsculpted, so DSA or SA R3. This looks great so far, keep up the hard work :D
Although other don't seem to agree, I think this set needs a uniform profile to pull off the aesthetics of the set and since SA is all the rage these days I think it should be SA R3. A uniform profile also cuts down on the costs of child deal, which would probobly result in more buys
I think SA profile is probably what it needs to set it apart from being easily recreated with other keycaps/modifiers (despite all the recent SA releases) :p
I think SA profile is probably what it needs to set it apart from being easily recreated with other keycaps/modifiers (despite all the recent SA releases) :p
Somebody at Reddit said to me earlier something similar. That person said that the base kit (the one that many people enjoy now that I changed) could be very easily recreated with other keycaps and didn't understand why people would prefer it rather than picking some white caps and green modifiers and mix them together. He was partially right, you can do it. But in my opinion it will never be the same as what I am presenting here. For me, it felt like if somebody was saying me that Granite is just 2 shades of grey.
I know that the set could has nothing special for many people, I knew it the moment I started to do that. But I also knew that there were people like me who would be pleased by the font, the color combinations, the background and many other little details of this set. Plus, we've got the child deals that expand the possibilities. Hell, my favorite part of of this process was discovering the WV-VCM-BFN combination(white, green and blue number row).
I'd totally be ok interested I a set.
If you need any insight into ATC stuff, I might be able to help. I'm still in school, but I could probably find somebody who does know.
I will buy both SA and DSA, but I prefer the SA
I like this. I am not 100% sure if I would buy it. But I very well may. I almost want to buy an ergodox as well. Only time will see I suppose.
I like this. I am not 100% sure if I would buy it. But I very well may. I almost want to buy an ergodox as well. Only time will see I suppose.
DSA is probably the best option for Ergodox.
If SA is done, the ErgoDox kit should be legended with novelties only- would be pretty unique and guarantee 100% compatibility.
If SA is done, the ErgoDox kit should be legended with novelties only- would be pretty unique and guarantee 100% compatibility.
That would solve the compatibility issues but I don't know if most Dox users would be happy with that decision.
True, might have to fall back on blanks in the end. Loving the Planck set by the way- the high gear/low gear keys are really cool.
I like this. I am not 100% sure if I would buy it. But I very well may. I almost want to buy an ergodox as well. Only time will see I suppose.
DSA is probably the best option for Ergodox.
I like this. I am not 100% sure if I would buy it. But I very well may. I almost want to buy an ergodox as well. Only time will see I suppose.
DSA is probably the best option for Ergodox.
If you don't mind me asking. How so? I am not read up on ergodox.
Surprised that SA got the most votes, I thought it would be DSA, since it's what the Air Traffic Control keyboards use. Would still buy SA though, since the colorway is and spot onShow Image(http://www.diakonsolutions.com/atcuseit/images/StarsInputs2.JPG)
I like this. I am not 100% sure if I would buy it. But I very well may. I almost want to buy an ergodox as well. Only time will see I suppose.
DSA is probably the best option for Ergodox.
If you don't mind me asking. How so? I am not read up on ergodox.
DSA flat profile makes easier to make caps for special layouts like Ergodox, than with profiled caps like DCS, or SA contoured.
Oh, awesome. I was just going off of the pretty charts :PSurprised that SA got the most votes, I thought it would be DSA, since it's what the Air Traffic Control keyboards use. Would still buy SA though, since the colorway is and spot onShow Image(http://www.diakonsolutions.com/atcuseit/images/StarsInputs2.JPG)
Right now we are in a 50/50 situation. DSA is winning with 51% of the votes
Love the ErgoDox render. I think one of the most versatile ErgoDox kits is from the last Granite round. I know not a lot of folks are fond of Granite but it might be a good base for adding ErgoDox child deals to future sets? Just spitballing.
Damn, all three of those are awesome.
My thoughts exactly :p this is really shaping up to be a great set :thumb:
Hey, just came across this IC now, so I am a bit late to the game, especially regarding the polls, but just wanted to say that this set looks great and I am def interested.
If everyone is going to push the SA train, let's definitely go the S3 train.
Speaking about the profile, we could also go with a 1-2-3-3-3-4. This was mentioned by somebody some time ago.
Speaking about the profile, we could also go with a 1-2-3-3-3-4. This was mentioned by somebody some time ago.
I think uniform R3 is still the best for this set. Maybe you should do another poll with R3 vs 12334 if you can't decided. I think the main reason R3 didn't do as well in the main poll was that people were more concerned with just have SA in general, this might clear up what people's true opinions on SA sculpting are.
Oh that's very true, a middle ground between the two, now you have me questioning which is better :-\
Speaking about the profile, we could also go with a 1-2-3-3-3-4. This was mentioned by somebody some time ago.
I think uniform R3 is still the best for this set. Maybe you should do another poll with R3 vs 12334 if you can't decided. I think the main reason R3 didn't do as well in the main poll was that people were more concerned with just have SA in general, this might clear up what people's true opinions on SA sculpting are.
I'll do another poll for sure, just to know about this, the international kit and some other stuff like the gamers kit and check if everything is finished.
The thing about 1-2-3-3-3-4 is that we get a sculpted profile where you can play with those three R3s. That profile has worked well before in some sets like Penumbra or Calm Depths
Oh that's very true, a middle ground between the two, now you have me questioning which is better :-\
Speaking about the profile, we could also go with a 1-2-3-3-3-4. This was mentioned by somebody some time ago.
I think uniform R3 is still the best for this set. Maybe you should do another poll with R3 vs 12334 if you can't decided. I think the main reason R3 didn't do as well in the main poll was that people were more concerned with just have SA in general, this might clear up what people's true opinions on SA sculpting are.
I'll do another poll for sure, just to know about this, the international kit and some other stuff like the gamers kit and check if everything is finished.
The thing about 1-2-3-3-3-4 is that we get a sculpted profile where you can play with those three R3s. That profile has worked well before in some sets like Penumbra or Calm Depths
SUPER interested for ErgoDox!
I wish you the best of luck. Great work on the icons. The novelties, especially the radar icon, looks so pleasing to the eye.
Nice set but it's too much color for me. GL!
No profile question on the poll?
No profile question on the poll?
The more I look at it, the more I want it :D
The more I look at it, the more I want it :D
Same here!
The more I look at it, the more I want it :D
Same here!
I have to find out a way to finish the ATCs novelties and I could say that the set is finished. Soon after the color chips arrive, I will contact Melissa and ask her about prices.
Profile will be most likely 1-2-3-3-3-4 as I've said before which will make Dvorak, Colemak, Ergodox and Planck users life much easier.
What do you need with the novelties?
I have a feeling this is going to have Carbon level success
Those renders look so cool :eek:
Those renders look so cool :eek:
IMHO they are quite meh
Those renders look so cool :eek:
IMHO they are quite meh
I like em!
You obviously did these yourself?
Those renders look so cool :eek:
IMHO they are quite meh
I like em!
You obviously did these yourself?
Yeah, that's why I can tell you that they are quite meh, look closely to the 1st one.
Those renders look so cool :eek:
IMHO they are quite meh
I like em!
You obviously did these yourself?
Yeah, that's why I can tell you that they are quite meh, look closely to the 1st one.
Hmm, probably not seeing what you are seeing :P
I enjoy them, love the backdrops as well as the wooden casing :)
If ever you get bored (after your GB kicks off) and have some time I'd like to seek some advise/assistance :D
Those renders look so cool :eek:
IMHO they are quite meh
I like em!
You obviously did these yourself?
Yeah, that's why I can tell you that they are quite meh, look closely to the 1st one.
Hmm, probably not seeing what you are seeing :P
I enjoy them, love the backdrops as well as the wooden casing :)
If ever you get bored (after your GB kicks off) and have some time I'd like to seek some advise/assistance :D
Rotating the board f**cked the image and it isn't well defined.
Feel free to PM me anytime!
Nice set but it's too much color for me. GL!
Don't be tricked by those colors, you can have a green-white color scheme!Show Image(http://i.imgur.com/hCA6NCK.png)Show Image(http://i.imgur.com/FDdblf4.png)
Nice set but it's too much color for me. GL!
Don't be tricked by those colors, you can have a green-white color scheme!Show Image(http://i.imgur.com/hCA6NCK.png)Show Image(http://i.imgur.com/FDdblf4.png)
Oh I didn't see that! Might work for me then
Color chips have arrived!
They arrived yesterday but I didn't check the mailbox
Good news: RA, YCF, VCM and OAS are perfect for the set! :thumb:Show Image(http://i.imgur.com/SoVylIC.jpg)Show Image(http://i.imgur.com/g6aqyQL.jpg)
(kind of)Bad news: BFN didn't looked as I thought (don't be tricked by the photos, trust me) and unfortunately I didn't order a BFP color chip, which is a stronger color and the other possibility I had in mind. In addition, as you could see, there is no WV color chip there! I ordered both color chips because I suspected that WV would be grayish. Turns out I was right! Luckily I ordered a WCK color chip.Show Image(http://i.imgur.com/y0EJKHN.jpg)
Conclusions
The "new" color scheme is:
WCK (white), VCM (green), BFP (blue), YCF (yellow), OAS (orange), and RA (red). Legends are WCK (white legends) or NN (black legends).
PD: while doing this post, I've realized that BFN it is used by DSA EVE, ROUND 4: SPHERICAL, and Symbiosis according to key pullerShow Image(http://cdn.keypuller.com/2015/05/Symbiosis_4-1280x853.jpg)
http://keypuller.com/round-4-spherical-space-cadet/
http://keypuller.com/symbiosis/
http://keypuller.com/eve/
Color chips have arrived!
They arrived yesterday but I didn't check the mailbox
Good news: RA, YCF, VCM and OAS are perfect for the set! :thumb:Show Image(http://i.imgur.com/SoVylIC.jpg)Show Image(http://i.imgur.com/g6aqyQL.jpg)
(kind of)Bad news: BFN didn't looked as I thought (don't be tricked by the photos, trust me) and unfortunately I didn't order a BFP color chip, which is a stronger color and the other possibility I had in mind. In addition, as you could see, there is no WV color chip there! I ordered both color chips because I suspected that WV would be grayish. Turns out I was right! Luckily I ordered a WCK color chip.Show Image(http://i.imgur.com/y0EJKHN.jpg)
Conclusions
The "new" color scheme is:
WCK (white), VCM (green), BFP (blue), YCF (yellow), OAS (orange), and RA (red). Legends are WCK (white legends) or NN (black legends).
PD: while doing this post, I've realized that BFN it is used by DSA EVE, ROUND 4: SPHERICAL, and Symbiosis according to key pullerShow Image(http://cdn.keypuller.com/2015/05/Symbiosis_4-1280x853.jpg)
http://keypuller.com/round-4-spherical-space-cadet/
http://keypuller.com/symbiosis/
http://keypuller.com/eve/
Looks like mostly good news to me, at least you found the colorway wasn't what you'd expect and can correct it :)
BFP sounds a tad dark- that was Penumbra's dark blue, right?
BFP sounds a tad dark- that was Penumbra's dark blue, right?
Nope, BFP is the light blue, the Shift legends are in that colour. The dark blue used for all the mods is BED.
I got some colour chips in yesterday, the BFP looks like it should work very nicely. I was surprised at how red the RA chip is, suits my own set design perfectly (it looks like YCF will also suit my set). The colours aren't accurate in the PMK photos and neither is this one, but it gives some idea of the difference between BFN and BFP and there's NN next to the BFP:
(Attachment Link)
It's best to use this as an initial guide to the colours: http://deskthority.net/wiki/Signature_Plastics_ABS_colours
Closest to that actual plastic that there is online. It's a little out of date, so some new colours are not represented and some of the old ones are not active any more, but it will get updated soon.
Also, Krogenar scanned the chips with a flatbed scanner (and mashby kindly hosted them on his Flickr) and though they're not as colour-accurate as the DT wiki RGB values, they're a lot better than the PMK photos: https://www.flickr.com/photos/compactkey/sets/72157634628432952/with/9294353672/
- Updated color scheme.
- Profile is 1-2-3-3-3-4
I guess now is time to talk about GB options.
- Updated color scheme.
- Profile is 1-2-3-3-3-4
I guess now is time to talk about GB options.
You could try to pioneer the new pmk interest check system, other than that there's always Massdrop
- Updated color scheme.
- Profile is 1-2-3-3-3-4
I guess now is time to talk about GB options.
You could try to pioneer the new pmk interest check system, other than that there's always Massdrop
I've considered both options since they are known by most people. I've checked PMK and there isn't a single IC over there. Running an IC there would be very risky and has its advantages, like treating directly with the manufacturer. On the other hand, MD exposure is huge and most sets over there reach the MoQ for all of their child deals.
- Updated color scheme.
- Profile is 1-2-3-3-3-4
I guess now is time to talk about GB options.
You could try to pioneer the new pmk interest check system, other than that there's always Massdrop
I've considered both options since they are known by most people. I've checked PMK and there isn't a single IC over there. Running an IC there would be very risky and has its advantages, like treating directly with the manufacturer. On the other hand, MD exposure is huge and most sets over there reach the MoQ for all of their child deals.
I don't think PMK is accepting any entries at the moment, I say that as they had previously shown 2 ICs (after the launch of their new platform) but even they are gone.
Are there any other options is the question :)
im super impressed with this set. nicest ergodox i've seen. i looooove the blue/green/yellow r1 shown in some of the mockups.
the only thing i'm hesitant about with the kit is the SA profile. i feel like we're fast approaching the point of SA over saturation! sure, DSA has been done to death.. but what about dcs? lovely, lonely, dcs. i guess nobody loves you anymore dcs. Sorry.
But I digress. Fantastic work here. Most uniquely interesting set I've seen in a long while.
One thing I'm still uncertain of in the new PMK is how the pricing will compare. Being that it's the manufacturer, the prices should end up lower (no Massdrop fee), but since they set the pricing themselves and it's probably going to be based on how many "IC votes" / preorder requests they get for it, you can't actually tell. The only way is to have a brave soul get quotes for different MOQ's for their set from SP, quotes from Massdrop for fees (processing, packaging, designer fee, etc) and then run the set through PMK to see how the prices differ.
On the other hand, SP seem to be paying more attention to the community. Could have something to do with community run sets getting enough orders to make them work overtime and have their machinery running two shifts a day for the forseeable future, maybe?... As a result, the PMK license agreement has been amended:
"3. Signature Plastics has the right under the license to:
a. decide whether or not to produce and sell keysets from the submitted design;
b. combine and/or eliminate child deals from the submitted design;
c. determine the quantity of keysets to produce and sell;
d. schedule when the keysets will be produced and sold;
e. establish the selling price of the keysets produced from the design;
f. use the design for marketing and promotional campaigns.
4. The Designer has the right under the license to:
a. pre-approve and authorize any changes to their design that Signature Plastics may suggest;
b. submit the design to other manufacturers/sellers;
c. rescind the rights given to Signature Plastics under this agreement provided a 60 day written notification is given to Signature Plastics prior to termination of the license. Signature Plastics retains the right to complete all work-in-process and sell all inventory related to that design following termination of the agreement."
So they no longer have rights to change the design itself (only altering the composition of kits) and the designer can rescind the agreement if they're not satisfied with how things are going. Anyway, I think it's a viable alternative to Massdrop (and there are many who really dislike Massdrop for various reasons) and once the website is finally fully functional should be considered. The other advantages are that SP takes care of rerunning the set and the more popular sets should continue to be available after the initial GB run.
The big draw for Massdrop, though, is the visibility and the resulting order quantities. A good design run there will have more sets made and thus possibly lower final pricing than going through PMK, although if the set is "marketed" well at the usual places it could reach similar numbers on PMK once PMK gets established.
IATA codes? I was expecting for ICAO but I guess IATA fits better.IATA codes are recognized by most people LAX, LHR, PEK... And I have also included a MAD keycap! My main purpose with that specific kit was to attract more people since they'll have their country/state represented.
Of course now that you posted voting links I realized... ever think about a green space bar instead of white? Something I would conceivably want with this set. Honestly this set is very much growing on me.
Yellow would be even better! But yeah I think some colored space bars in SA would be appreciated.Of course now that you posted voting links I realized... ever think about a green space bar instead of white? Something I would conceivably want with this set. Honestly this set is very much growing on me.
Kits are never final until the set is produced. The very first set had a yellow space bar so we could ask for a spare green one.
It's been fun helping you out with this and I really appreciated not only that you asked for my advice but took it on a couple of aspects about the set :D I really look forward to going all-out on this set when the GB happens.
Also another random suggestion, I feel like the orange gamer set is a bit out of place. I liek the use of color, but I would love it to be in the yellow color instead, and would simplify the color pallet. I do love the fact that you have QWER instead of just WASD.
nice
You put a lot of effort into this design, I really hope you can get it done.
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
That is the link I was looking for to share on R4 shifts, thank you.
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
That is the link I was looking for to share on R4 shifts, thank you.
I was even excited to know that some sets will be finally fully sclupted like Jukebox
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
yey
I LOVE the colors
Tho I feel like all the SA sets are wasted since there are no R4 Shifts yet
Uhhhh https://geekhack.org/index.php?topic=76674.0 (https://geekhack.org/index.php?topic=76674.0)
yey
Here's the keyset profile:Show Image(http://i.imgur.com/Cwye9oU.png)
Show Image(https://s3.amazonaws.com/f.cl.ly/items/1J2e3a3z090t1O1n0u0o/Image%202015-11-08%20at%202.09.48%20PM.png)
Bam!
Show Image(https://s3.amazonaws.com/f.cl.ly/items/1J2e3a3z090t1O1n0u0o/Image%202015-11-08%20at%202.09.48%20PM.png)
Bam!
I would love to purchase this, but I really hope it isn't priced as absurdly as Otaku set on MD. $40 for a numpad kit is outrageous.As long as MD and the creator set the correct MOQs and price drops it should be OK. Otaku was horribly set up, with the prices set for child deals at 10 produced, which is obviously going to be incredibly expensive.
200 VOTES!
I would love to purchase this, but I really hope it isn't priced as absurdly as Otaku set on MD. $40 for a numpad kit is outrageous.
Probably a bit too late to vote but I voted anyway! Really like the set!
Ergodox is provisional due to the number of votes? Or because of the profile?
I'm certainly planning on buying one ;D
Because of the price of the child deal which is extremely high.
Because of the price of the child deal which is extremely high.
Okay. Would blank modifiers be an option to help reduce that? Not that I want that to happen but if it meant the difference between ergodox set or not.
Admire your work, Zambumon! :thumb:
One thing though, I've noticed that the blanks and spacebars kit was removed from the list, and that the 7u spacebar was merged with tsaghan kit, so no 6u spacebars anymore.
Is this happening because of SP's missing 6u spacebar moulds? or simply that the need is too small?
Because of the price of the child deal which is extremely high.
Because of the price of the child deal which is extremely high.
How high is extremely high?
Sets | Price
-----|------
15 | 143.95
25 | 103.77
50 | 73.63
75 | 63.59
100 | 58.56
150 | 53.54
200 | 51.03
250 | 49.52
Sets | Price
-----|------
15 | 143.95
25 | 103.77
50 | 73.63
75 | 63.59
100 | 58.56
150 | 53.54
200 | 51.03
250 | 49.52
...
You weren't kidding.
One question, what are the row 3 arrows for? Seems like thats gonna end up being a really expensive child pack for three keys.
One question, what are the row 3 arrows for? Seems like thats gonna end up being a really expensive child pack for three keys.
In case you want a uniform layout for plancks, it isn't as expensive as you think 4$ aprox
One question, what are the row 3 arrows for? Seems like thats gonna end up being a really expensive child pack for three keys.
In case you want a uniform layout for plancks, it isn't as expensive as you think 4$ aprox
Huh, interesting. Guess I haven't seen a lot of plancks with legends laid out like that.
Kind of an update: as many other SA Keycap sets, if we are lucky and Massdrop wants to run a GB, it will take some time to have a it since SP production queue is huge. In the meantime, have some renders.Show Image(http://i.imgur.com/E0OQzug.png)Show Image(http://i.imgur.com/IffDQ3F.png)
Last weekend I started to make my own 3D renders so we could have a nice reference of the set. I started by making a Planck because I was thinking about buying one.
Note: the profile displayed there is 1-2-3-4 since I wanted to test the profile, material and colors (and that's the reason I didn't put any legends to it).
Great work. Looks nice!
Kind of an update: as many other SA Keycap sets, if we are lucky and Massdrop wants to run a GB, it will take some time to have a it since SP production queue is huge. In the meantime, have some renders.Show Image(http://i.imgur.com/E0OQzug.png)Show Image(http://i.imgur.com/IffDQ3F.png)
Last weekend I started to make my own 3D renders so we could have a nice reference of the set. I started by making a Planck because I was thinking about buying one.
Note: the profile displayed there is 1-2-3-4 since I wanted to test the profile, material and colors (and that's the reason I didn't put any legends to it).
Kind of an update: as many other SA Keycap sets, if we are lucky and Massdrop wants to run a GB, it will take some time to have a it since SP production queue is huge. In the meantime, have some renders.Show Image(http://i.imgur.com/E0OQzug.png)Show Image(http://i.imgur.com/IffDQ3F.png)
Last weekend I started to make my own 3D renders so we could have a nice reference of the set. I started by making a Planck because I was thinking about buying one.
Note: the profile displayed there is 1-2-3-4 since I wanted to test the profile, material and colors (and that's the reason I didn't put any legends to it).
Lookin good - what software you using and what tutorials did you start with?
When is the groupbuy happening? I can't wait. This set is so pretty!
Renders look awesome, nice work! :thumb:
i love ground control ,hope it can revive
:(
This set was great, what a waste to stop this projet :'(
@Zambumon - Just curious, what font are you using in your renders and mock-ups?
I'm not a fan of white alphas but I still hope this set gets made. It's an awesome concept. I get this damn song stuck in my head every time I see the thread pop back up.
I work at an airport (engineering, not traffic control, but oh well), and I need this. Really hoping that the ISO kit makes it if the group buy comes to fruition. Sculpted SA just makes this so much better as well!
I work at an airport (engineering, not traffic control, but oh well), and I need this. Really hoping that the ISO kit makes it if the group buy comes to fruition. Sculpted SA just makes this so much better as well!
I know, truly a beautiful set. Nice theme too. ;)
I realize that this is on hold, but are Signature Plastics really able to make caps using that typeface? Dyesub? I really love this set, and I think the typeface has a lot to do with it (and the colors too [so basically I love the whole thing]).
I realize that this is on hold, but are Signature Plastics really able to make caps using that typeface? Dyesub? I really love this set, and I think the typeface has a lot to do with it (and the colors too [so basically I love the whole thing]).
I was just about to ask the same. Do they already have molds for Gotham Round (and if they do, also at this weight?).
NoooooooI realize that this is on hold, but are Signature Plastics really able to make caps using that typeface? Dyesub? I really love this set, and I think the typeface has a lot to do with it (and the colors too [so basically I love the whole thing]).
I was just about to ask the same. Do they already have molds for Gotham Round (and if they do, also at this weight?).
No, but we could go Dyesub DSA and problem solved!
I realize that this is on hold, but are Signature Plastics really able to make caps using that typeface? Dyesub? I really love this set, and I think the typeface has a lot to do with it (and the colors too [so basically I love the whole thing]).
I was just about to ask the same. Do they already have molds for Gotham Round (and if they do, also at this weight?).
No, but we could go Dyesub DSA and problem solved!
NoooooooI realize that this is on hold, but are Signature Plastics really able to make caps using that typeface? Dyesub? I really love this set, and I think the typeface has a lot to do with it (and the colors too [so basically I love the whole thing]).
I was just about to ask the same. Do they already have molds for Gotham Round (and if they do, also at this weight?).
No, but we could go Dyesub DSA and problem solved!
SA please :'(
Nooooooo
SA please :'(
Nooooooo
SA please :'(
Oh also, like he said, the only way to get that font or even typeface (I think) is to go DSA so that they can use dyesub.
After Amazing Chocolate, When does this set may continue on? Hope you doesn't
forget this SA set! Really love this colorway
从我的 iPhone 发送,使用 Tapatalk
After Amazing Chocolate, When does this set may continue on? Hope you doesn't
forget this SA set! Really love this colorway
从我的 iPhone 发送,使用 Tapatalk
Honestly, I don't know it could be next month or in winter. I like Ground Control but I think I'll change the profile to either DSA or R3 SA which means that I have to revise the child deals.
That being said, there is a GMK set that I'm working on. I've already left some clues...
After Amazing Chocolate, When does this set may continue on? Hope you doesn't
forget this SA set! Really love this colorway
从我的 iPhone 发送,使用 Tapatalk
Honestly, I don't know it could be next month or in winter. I like Ground Control but I think I'll change the profile to either DSA or R3 SA which means that I have to revise the child deals.
That being said, there is a GMK set that I'm working on. I've already left some clues...
After Amazing Chocolate, When does this set may continue on? Hope you doesn't
forget this SA set! Really love this colorway
从我的 iPhone 发送,使用 Tapatalk
Honestly, I don't know it could be next month or in winter. I like Ground Control but I think I'll change the profile to either DSA or R3 SA which means that I have to revise the child deals.
That being said, there is a GMK set that I'm working on. I've already left some clues...
All R3 is not a bad choise. At least it can lower the total cost.
从我的 iPhone 发送,使用 Tapatalk
BTW,Which GMK set are you working on now?GMK Hydro?or some other new desgins?
Your 3D renders are really cool.
Wow,a new design!Looking forward to that……After Amazing Chocolate, When does this set may continue on? Hope you doesn't
forget this SA set! Really love this colorway
从我的 iPhone 发送,使用 Tapatalk
Honestly, I don't know it could be next month or in winter. I like Ground Control but I think I'll change the profile to either DSA or R3 SA which means that I have to revise the child deals.
That being said, there is a GMK set that I'm working on. I've already left some clues...
All R3 is not a bad choise. At least it can lower the total cost.
从我的 iPhone 发送,使用 Tapatalk
Cost isn't the main reason for the change of profile but layout compatibility.QuoteBTW,Which GMK set are you working on now?GMK Hydro?or some other new desgins?
Your 3D renders are really cool.
A new design:D
That being said, there is a GMK set that I'm working on. I've already left some clues...
is it too late to show interest? lol
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...Tell me about...
should there be a post + time limit to start an IC? way to many 1post joined yesterday keyset "designers" popping up recently...