geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: Dihedral on Fri, 27 March 2015, 08:53:43

Title: [GB] Multi-Functional Steel Switch Holder - GB Finished
Post by: Dihedral on Fri, 27 March 2015, 08:53:43
This group buy has been completed, thanks to all who participated.


(http://i.imgur.com/eZfEcAb.jpg)

Last Units!


(http://i.imgur.com/xZOBab5.jpg)

The switch holder holding MX Switches.

(http://i.imgur.com/umvXwRZ.png)

Holding MX and Matias - top view

(http://i.imgur.com/v2n47mp.png)

Underside showing MX and Matias Switches.

This is a versatile and attractive switch holder that should appeal to many members of the mechanical keyboard community.


Specifications

Potential Uses

Image from LeandreN
(http://i.imgur.com/NN9aiMY.jpg)

Image from ChrisRK
(http://i.imgur.com/J5duTaA.jpg)
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: hjc1710 on Fri, 27 March 2015, 09:11:28
I don't need a 3rd switch tester... I don't need a 3rd switch tester... But Alps?.... Ugh, I might be caving.

This looks great man, best of luck!
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Fri, 27 March 2015, 09:12:44
Quote from: hjc1710 on Fri, 27 March 2015, 09:11:28
I don't need a 3rd switch tester... I don't need a 3rd switch tester... But Alps?.... Ugh, I might be caving.

This looks great man, best of luck!

If you want it, it's not gonna be around for long! 3 units left - I left it in the IC thread for too long :P
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Sun, 29 March 2015, 11:28:35
Last interest calls to make up the numbers...
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Tue, 31 March 2015, 12:52:39
Updated OP
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Fri, 03 April 2015, 07:04:33
Update: Expecting delivery around next friday. Invoices will be sent out then.
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Data on Fri, 03 April 2015, 09:02:52
 :thumb:
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: LeandreN on Thu, 09 April 2015, 09:36:21
Got some more?
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Thu, 09 April 2015, 09:56:39
Quote from: LeandreN on Thu, 09 April 2015, 09:36:21
Got some more?

Yep, several left at 10 pounds each. Arriving tomorrow hopefully. PM me with the amount you want and your paypal / mailing adress and I'll add you to my spreadsheet.
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: LeandreN on Thu, 09 April 2015, 09:58:11
Quote from: Dihedral on Thu, 09 April 2015, 09:56:39
Quote from: LeandreN on Thu, 09 April 2015, 09:36:21
Got some more?

Yep, several left at 10 pounds each. Arriving tomorrow hopefully. PM me with the amount you want and your paypal / mailing adress and I'll add you to my spreadsheet.
PMd
Title: Re: [GB] Multi-Functional Steel Switch Holder (£10)
Post by: Dihedral on Thu, 09 April 2015, 10:18:15
Quote from: LeandreN on Thu, 09 April 2015, 09:58:11
Quote from: Dihedral on Thu, 09 April 2015, 09:56:39
Quote from: LeandreN on Thu, 09 April 2015, 09:36:21
Got some more?

Yep, several left at 10 pounds each. Arriving tomorrow hopefully. PM me with the amount you want and your paypal / mailing adress and I'll add you to my spreadsheet.
PMd

Awesome.
Title: Re: [GB] Multi-Functional Steel Switch Holder - RECEIVED FROM MANUFACTURER
Post by: Dihedral on Fri, 10 April 2015, 07:13:12
Recieved from manufacturer. Pictures coming...
Title: Re: [GB] Multi-Functional Steel Switch Holder - OP Updated with Pictures
Post by: LeandreN on Fri, 10 April 2015, 09:20:55
Quote from: Dihedral on Fri, 10 April 2015, 07:13:12
Recieved from manufacturer. Pictures coming...
:)
Title: Re: [GB] Multi-Functional Steel Switch Holder - OP Updated with Pictures
Post by: Dihedral on Fri, 10 April 2015, 09:35:13
Quote from: LeandreN on Fri, 10 April 2015, 09:20:55
Quote from: Dihedral on Fri, 10 April 2015, 07:13:12
Recieved from manufacturer. Pictures coming...
:)

Invoices should go out soon. Hope the pictures meet your expectations :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - OP Updated with Pictures
Post by: LeandreN on Fri, 10 April 2015, 09:37:24
Quote from: Dihedral on Fri, 10 April 2015, 09:35:13
Quote from: LeandreN on Fri, 10 April 2015, 09:20:55
Quote from: Dihedral on Fri, 10 April 2015, 07:13:12
Recieved from manufacturer. Pictures coming...
:)

Invoices should go out soon. Hope the pictures meet your expectations :)
Thanks
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: Dihedral on Sun, 12 April 2015, 12:01:36
Invoices sent. The quicker you pay, the quicker you get your switch holder :)

If there are any issues feel free to send me a PM.
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: KnivesM on Sun, 12 April 2015, 12:20:40
and paid :D
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: LeandreN on Sun, 12 April 2015, 12:20:55
Paid
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: Dihedral on Sun, 12 April 2015, 12:25:06
Quote from: LeandreN on Sun, 12 April 2015, 12:20:55
Paid

Thanks! You guys are all quick :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: LeandreN on Sun, 12 April 2015, 14:27:00
When do you plan on sending it out? :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: Dihedral on Mon, 13 April 2015, 03:09:22
Quote from: LeandreN on Sun, 12 April 2015, 14:27:00
When do you plan on sending it out? :)

Today, for those who have already paid
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: LeandreN on Mon, 13 April 2015, 06:56:01
Quote from: Dihedral on Mon, 13 April 2015, 03:09:22
Quote from: LeandreN on Sun, 12 April 2015, 14:27:00
When do you plan on sending it out? :)

Today, for those who have already paid
Yay! Hyped :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: Dihedral on Mon, 13 April 2015, 06:58:49
Quote from: LeandreN on Mon, 13 April 2015, 06:56:01
Quote from: Dihedral on Mon, 13 April 2015, 03:09:22
Quote from: LeandreN on Sun, 12 April 2015, 14:27:00
When do you plan on sending it out? :)

Today, for those who have already paid
Yay! Hyped :)

Make that tomorrow. Printer trouble -_-
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: LeandreN on Mon, 13 April 2015, 06:59:08
Quote from: Dihedral on Mon, 13 April 2015, 06:58:49
Quote from: LeandreN on Mon, 13 April 2015, 06:56:01
Quote from: Dihedral on Mon, 13 April 2015, 03:09:22
Quote from: LeandreN on Sun, 12 April 2015, 14:27:00
When do you plan on sending it out? :)

Today, for those who have already paid
Yay! Hyped :)

Make that tomorrow. Printer trouble -_-
Still hyped ! :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - Invoices Sent
Post by: Dihedral on Tue, 14 April 2015, 03:41:22
In the Mail! If you've already paid, expect delivery in the next few days.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail / 3 Units Remaining
Post by: LeandreN on Tue, 14 April 2015, 04:17:04
Quote from: Dihedral on Tue, 14 April 2015, 03:41:22
In the Mail! If you've already paid, expect delivery in the next few days.
Yay
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail / 3 Units Remaining
Post by: Dihedral on Tue, 14 April 2015, 11:49:51
Once you guys get your units then please write a review and post a link here. Also, if you have any ideas for a potential second run - with different sizes - please also tell me.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail / 3 Units Remaining
Post by: LeandreN on Tue, 14 April 2015, 12:31:56
Quote from: Dihedral on Tue, 14 April 2015, 11:49:51
Once you guys get your units then please write a review and post a link here. Also, if you have any ideas for a potential second run - with different sizes - please also tell me.

Definitely will. Thanks for doing this ! :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Wed, 15 April 2015, 05:58:30
Only 3 Units left - last chance to order.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Thu, 16 April 2015, 03:08:32
Quote from: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .
Where do you live ? I hope I get mine soon :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Thu, 16 April 2015, 03:33:16
Quote from: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .

That's interesting. Mine mounts Alps more firmly than Cherry. Looser is better I guess though.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: chyros on Thu, 16 April 2015, 07:02:06
Quote from: LeandreN on Thu, 16 April 2015, 03:08:32
Quote from: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .
Where do you live ? I hope I get mine soon :)
Hampshire.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Thu, 16 April 2015, 07:06:15
Quote from: chyros on Thu, 16 April 2015, 07:02:06
Quote from: LeandreN on Thu, 16 April 2015, 03:08:32
Quote from: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .
Where do you live ? I hope I get mine soon :)
Hampshire.


Aa England
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Fri, 17 April 2015, 05:03:12
Anyone else got theirs?
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Fri, 17 April 2015, 05:30:49
Quote from: Dihedral on Fri, 17 April 2015, 05:03:12
Anyone else got theirs?
Probably later today
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: chyros on Fri, 17 April 2015, 05:39:24
Quote from: LeandreN on Thu, 16 April 2015, 07:06:15
Quote from: chyros on Thu, 16 April 2015, 07:02:06
Quote from: LeandreN on Thu, 16 April 2015, 03:08:32
Quote from: chyros on Thu, 16 April 2015, 03:07:15
It arrived in the mail yesterday. It's pretty thick - nice! For those wondering; it mounts Alps switches in the horizontal slot and Cherries in the vertical slot, so there is a little play for each. Alps aren't retained by it all THAT well, but then again, that does make them easier to replace. I'll be using mine in a video review I've got planned for next month :) .
Where do you live ? I hope I get mine soon :)
Hampshire.


Aa England
Ja :) . I thought you meant specifically as it already says UK under my avatar xD .
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Sat, 18 April 2015, 05:21:10
Quote from: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?

~10 minutes
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Sat, 18 April 2015, 05:23:09
Quote from: Dihedral on Sat, 18 April 2015, 05:21:10
Quote from: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?

~10 minutes
I have waited for two days now...
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Sat, 18 April 2015, 07:43:53
Quote from: LeandreN on Sat, 18 April 2015, 05:23:09
Quote from: Dihedral on Sat, 18 April 2015, 05:21:10
Quote from: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?

~10 minutes
I have waited for two days now...

Strange... PM a mod?
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Sat, 18 April 2015, 07:44:41
Quote from: Dihedral on Sat, 18 April 2015, 05:21:10
Quote from: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?

~10 minutes
I have waited for two days now...
Quote from: Dihedral on Sat, 18 April 2015, 07:43:53
Quote from: LeandreN on Sat, 18 April 2015, 05:23:09
Quote from: Dihedral on Sat, 18 April 2015, 05:21:10
Quote from: LeandreN on Sat, 18 April 2015, 03:00:39
Quote from: Dihedral on Sat, 18 April 2015, 02:59:21
Quote from: LeandreN on Fri, 17 April 2015, 13:43:19
Not today. Next week :)

Ah unlucky. Hopefully Monday then :)
Yup. Looking forward to it :)

How long did you wait to get approval on your GB thread?

~10 minutes
I have waited for two days now...

Strange... PM a mod?
He won't respond. Strange. Will try again.
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Mon, 20 April 2015, 08:00:19
Didn't get it today either. My international post usually delivers on Tuesdays for some reason though :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: LeandreN on Tue, 21 April 2015, 07:40:57
(http://i.imgur.com/NmkePgS.jpg)


(http://i.imgur.com/NN9aiMY.jpg)



Man, this thing got weight. Amazing little piece of metal. The holes fit my switches perfectly. I plan on making some kind of programmable 4-key module. The finish is stunning and as expected. Thanks for doing this!
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Tue, 21 April 2015, 10:02:18
Quote from: LeandreN on Tue, 21 April 2015, 07:40:57
Show Image
(http://i.imgur.com/NmkePgS.jpg)


Man, this thing got weight. Amazing little piece of metal. The holes fit my switches perfectly. I plan on making some kind of programmable 4-key module. The finish is stunning and as expected. Thanks for doing this!

No problem. Thanks for participating :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Wed, 22 April 2015, 04:52:01
2 left :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - In the Mail - LAST CHANCE TO GET
Post by: Dihedral on Fri, 24 April 2015, 12:27:56
(http://i.imgur.com/eZfEcAb.jpg)

Here's the last two switch holders. This could well be your last chance to get these!
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: ander on Sat, 25 April 2015, 03:07:39
Quote from: Dihedral on Fri, 27 March 2015, 08:53:43
Potential Uses
  • Switch Tester - try out different switches
  • Artisan Cap Display - store and show off your Cap Collection. Alternatively, an attractive option for cap makers looking to professionally show their wares.
  • Switch Lubrication and Modding station - a useful tool to streamline your modding workflow without taking up space like larger stations
  • DIY macro board - add a teensy for a stylish and customisable macro board.

You could also:
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: Dihedral on Sat, 25 April 2015, 05:41:53
Quote from: ander on Sat, 25 April 2015, 03:07:39
Quote from: Dihedral on Fri, 27 March 2015, 08:53:43
Potential Uses
  • Switch Tester - try out different switches
  • Artisan Cap Display - store and show off your Cap Collection. Alternatively, an attractive option for cap makers looking to professionally show their wares.
  • Switch Lubrication and Modding station - a useful tool to streamline your modding workflow without taking up space like larger stations
  • DIY macro board - add a teensy for a stylish and customisable macro board.

You could also:
  • Glue some accordion reeds to it to make a four-note harmonica
  • Use it as a graffiti template for someone whose tag is four small rectangles
  • Add some scrolling red LEDs, glue it to the front of your glasses, and pretend you're a Cylon (https://en.wikipedia.org/wiki/Cylon_%28Battlestar_Galactica%29).


    Show Image
    (http://nyquil.org/uploads/CGcylon.png)



Indeed! A multitude of uses :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: ander on Sun, 26 April 2015, 03:48:56
That's why it's such a great value! I've just scratched the surface here, of course.
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: LeandreN on Tue, 28 April 2015, 00:39:06
Placed my gaterons on it. Perfect for testing the different switches!
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: Dihedral on Tue, 28 April 2015, 01:57:56
Quote from: LeandreN on Tue, 28 April 2015, 00:39:06
Placed my gaterons on it. Perfect for testing the different switches!

Yep, I saw your gaterons on /r/mk :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: Dihedral on Thu, 30 April 2015, 11:49:58
Bumping :P
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: Dihedral on Sat, 02 May 2015, 04:23:20
There must be two more people who want one of these :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: LeandreN on Sat, 02 May 2015, 04:26:01
I want, but all my money goes to my 60% plate project right now. The one I have is absolutely awesome and I bring it so I can Click Clack everywhere!
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: Dihedral on Sat, 02 May 2015, 04:31:52
Quote from: LeandreN on Sat, 02 May 2015, 04:26:01
I want, but all my money goes to my 60% plate project right now. The one I have is absolutely awesome and I bring it so I can Click Clack everywhere!

I understand - focus on your GB. I'm not into 60% boards but it will be great for those who want to build a board without paying stupid prices :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - 2 LEFT
Post by: LeandreN on Sat, 02 May 2015, 04:32:17
Quote from: Dihedral on Sat, 02 May 2015, 04:31:52
Quote from: LeandreN on Sat, 02 May 2015, 04:26:01
I want, but all my money goes to my 60% plate project right now. The one I have is absolutely awesome and I bring it so I can Click Clack everywhere!

I understand - focus on your GB. I'm not into 60% boards but it will be great for those who want to build a board without paying stupid prices :)
Yup :)
Quote from: Dihedral on Sat, 02 May 2015, 04:31:52
Quote from: LeandreN on Sat, 02 May 2015, 04:26:01
I want, but all my money goes to my 60% plate project right now. The one I have is absolutely awesome and I bring it so I can Click Clack everywhere!

I understand - focus on your GB. I'm not into 60% boards but it will be great for those who want to build a board without paying stupid prices :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - 1 LEFT
Post by: Dihedral on Sun, 03 May 2015, 07:44:52
One left :)
Title: Re: [GB] Multi-Functional Steel Switch Holder - GB Finished
Post by: Dihedral on Fri, 08 May 2015, 00:38:34
GB Finished. Thanks to all who participated! If anyone still needs to contact me, send me a PM.