Author Topic: [H]BBv2s, CCs, KBKs, Springs, Switches, Plates, Gaterons [W]Powder Puff Blue BB (Read 38660 times)

strict · « **on:** Wed, 21 May 2014, 17:59:44 »

Wanted (trade or buy)

Realforce 87UB 45g "EK Edition"
Topre Realforce 87 box, ideally the box for an 87USW (SE070S)

Trading

Nothing currently ...

Selling

Plenty of stuff coming soon ...

strict · « **Reply #1 on:** Fri, 23 May 2014, 20:11:38 »

History

More

Toxic BroBot Set - Topre (traded to iAmAhab)
- Toxic V2
- Ooze V2

IceStorm BBv2 - Topre (traded to trizkut)

Fauxluminum BBv2 - Topre (traded to btctopre)

Conservative Red BBv2 - MX (traded to Psybin)

Green Stump - Topre (traded to chive_)

Blaze Blue Wrapped KWK - BS (traded to Sed8op8)

Massdrop ErgoDox PCBs with some extras - $35 shipped (sold to SpAmRaY)
- Includes the following items:
- MCP23018 I/O expander
- 2x 3.5mm TRRS connectors
- USB mini B connector
- USB mini B plug
- 0.1 UF ceramic capacitor
- 10x 220 Ohm 1/4w 5% resistors
- You will still need a case, a Teensy, switches, diodes, 2x 2.2K Ohm resistors, TRRS cable, and USB cable

Assembled JD40 - ~~$150~~ ~~$140~~ $130 shipped (CONUS only) (sold to admiralvorian)
- Stainless steel plates sanded with 320 grit to give brushed look
- Vintage black switches
- SIP sockets installed for Capslock LED
- White LED with 300 ohm resistor
- Costar 6.25x stabilizer - lubed with Krytox thick
- Super grippy clear vinyl bumpon feet
- Soldered with Kester 44
- I will even program it with the layout of your choice if you send me pictures of what you want
- Imgur album with some build process pictures

A: $20 (sold to loud_asian)
- Aluminum ANSI 125 Phantom plate
- Perfectly usable, no defects
- Surface sanded with 320 grit sandpaper
- Corrected design flaw where 2x stabilized switch tops could not be opened
- Stab cutouts beveled for Costar stabs (on the back of the plate)
- NOTE - if ordered alone this plate will be shipped with a garbage SS uTKL plate for rigidity of the shipping envelope

B: $35 (sold to jonathanyu)
- Stainless steel ANSI 150/7BIT hybrid plate
- Perfectly usable, no defects (I think this was a WFD plate?)
- Full F-row
- Split backspace
- Split right shift

C: $30 (sold to Arcoril)
- Stainless steel ANSI 125 Phantom plate
- Perfectly usable, minor cosmetic defects
- Left LED hole is slightly enlarged and oblong but this is totally hidden once installed into a case

D: ~~$25~~ $20 (sold to admiralvorian)
- Stainless steel ANSI 150 Phantom plate
- Perfectly usable, minor cosmetic defects
- Small laser cut marks in both bottom corners that are mostly hidden once installed into a case
- Some sticker/glue residue

E: $35 (sold to jonathanyu)
- Stainless steel 7BIT Phantom plate
- Perfectly usable, no defects

F: ~~$15~~ ~~$10~~ $5 $2 (sold to Thechemist)
- Stainless steel ANSI 150 Phantom plate
- Might be usable, significant defects
- Entire plate design shifted too far to the left, possibly usable depending upon case.
- Might make a good lube station?

G: ~~$25~~ $20 (sold to kareed44)
- Stainless steel ANSI 150 Phantom plate
- Usable, mild cosmetic defect
- "P" switch hole has a goofy cut
- Switch can still be installed and defect is almost entirely hidden under switch lip

H: ~~$35~~ $30 (sold to nova779)
- Stainless Steel ANSI 150 Phantom plate
- Perfectly usable, no defects

I: $3/ea + $2 shipping (sold to 00zer0)
- 19 Phantom novelty keys
- Thick PBT (as thick as GMK)
- Dye sublimated
- I ordered these literally to get one key for myself

- Titanium Switch Tools (traded to lucaslink)

Granite Set + Extras - $160 Shipped (Sold to JulienC)

- Set is essentially like new, common kit and icon mods have seen probably less than 3 hours of actual use. The other keys have seen zero usage at all. I got them thinking I might use them on a crazy layout keyboard I build someday but my keyboard interest is waning lately and I suspect that day will never come. Some keys were warped when I got them but I spent many painstaking hours gently adjusting them with a hair-dryer so everything should be as straight and true as an arrow now (something you won't get buying in a new round ...)
- Common Kit (minus "/r/mk" key)
- Icon Mods
- Icon Pro Mods
- Enter + Esc kit
- Partial Gamer Kit (Space Invader, All blue keys, All orange keys)
- 7u spacebar

GID Skull - Topre (traded to slickmamba)

strict · « **Reply #2 on:** Sun, 25 May 2014, 10:49:55 »

Both keys are still available

strict · « **Reply #3 on:** Tue, 27 May 2014, 21:27:46 »

Come and get you some toxic

1pq · « **Reply #4 on:** Wed, 28 May 2014, 20:11:22 »

Are you interested in trading for a toxic v2 mx?

strict · « **Reply #5 on:** Wed, 28 May 2014, 21:29:23 »

Quote from: 1pq on Wed, 28 May 2014, 20:11:22

Are you interested in trading for a toxic v2 mx?

If I'm totally honest, at this point I'm hesitant to trade for a lone toxic. My ideal trade would be for both a Toxic and an Ooze since I absolutely adore the pair together. My concern is that it might be more difficult going forward finding someone to trade a lone topre Ooze for an MX. If I don't have any offers for the pair in the next few weeks and you would still like to trade at that point I would definitely be open to it. I appreciate the offer though

If someone else comes along and wants to trade a lone Ooze I will definitely take your offer for the toxic trade.

strict · « **Reply #6 on:** Sun, 01 June 2014, 18:40:45 »

Updated the first post with some Fauxluminum deliciousness

strict · « **Reply #7 on:** Wed, 04 June 2014, 19:32:38 »

strict · « **Reply #8 on:** Tue, 10 June 2014, 12:55:00 »

iAmAhab · « **Reply #9 on:** Tue, 10 June 2014, 13:28:32 »

I have both the toxics in mx and want topre. I'm not conus though.

strict · « **Reply #10 on:** Tue, 10 June 2014, 16:39:30 »

Quote from: iAmAhab on Tue, 10 June 2014, 13:28:32

I have both the toxics in mx and want topre. I'm not conus though.

I'll send you a PM shortly and we can work out the details. Thanks!

strict · « **Reply #11 on:** Fri, 13 June 2014, 14:38:39 »

The toxic pair are now on a long journey to Norway

Now I just need someone who wants to trade for the Fauxluminum!

strict · « **Reply #12 on:** Wed, 18 June 2014, 07:37:36 »

BunnyLake · « **Reply #13 on:** Wed, 18 June 2014, 07:56:05 »

fyi

there are 2 ghost in the machine whites

me and girlshark each have one

strict · « **Reply #14 on:** Wed, 18 June 2014, 08:02:55 »

Quote from: BunnyLake on Wed, 18 June 2014, 07:56:05

fyi

there are 2 ghost in the machine whites

me and girlshark each have one

Thanks for the info! Im guessing one is topre and one is mx?

strict · « **Reply #15 on:** Sat, 21 June 2014, 13:11:44 »

Updated the first post with some additional Bro's I would trade for after paging through the Bro Caps Gallery thread.

strict · « **Reply #16 on:** Tue, 24 June 2014, 19:21:04 »

The two Toxic Bros from iAmAhab arrived safely today. He did a great job packaging them and I could not be happier having traded with him.

Hopefully my shipment from the US is delivered to you soon!

strict · « **Reply #17 on:** Fri, 27 June 2014, 23:50:44 »

Added a want to buy section.

I need some of that dsa granite pbt in my life! I'm looking for the Common Kit with Text Mods and I would love if I could get the blue Enter keys to go with it. If you have a set you're willing to part get in contact with me, I will happily pay their original cost + shipping (potentially a little more assuming new or like new condition).

RESPRiT · « **Reply #18 on:** Sat, 28 June 2014, 00:24:44 »

Are you only looking for MX Bros?

strict · « **Reply #19 on:** Sat, 28 June 2014, 00:34:06 »

Quote from: RESPRiT on Sat, 28 June 2014, 00:24:44

Are you only looking for MX Bros?

That's correct, MX only

strict · « **Reply #20 on:** Tue, 01 July 2014, 07:03:53 »

strict · « **Reply #21 on:** Sat, 05 July 2014, 22:20:52 »

Bumpage

strict · « **Reply #22 on:** Thu, 10 July 2014, 12:19:54 »

Fauxluminum is pending. Dropped the Granite DSA keys from my WTB after reading about and seeing all the QC issues with this batch.

Now I'm looking for a black Phantom PCB and a GH60 PCB.

strict · « **Reply #23 on:** Sun, 13 July 2014, 15:17:10 »

Bump ... surely there's a few unused black PCB phantom boards still left out there somewhere

strict · « **Reply #24 on:** Wed, 16 July 2014, 13:00:28 »

Bump. Would really love to get my first clack!

strict · « **Reply #25 on:** Sun, 20 July 2014, 10:09:52 »

Bump. I could really use a black PCB phantom sometime soon. I'm getting a prototype of a stainless steel plate case made soon that will have an exposed PCB and I think a black phantom will end up looking much nicer than a white one. If it came down to it, I would buy a white one and pay to ship it to you in addition to paying for you to ship the black one to me.

I'm willing to bend on the unused requirement as long as you could show the PCB is exceptionally clean; no burnt traces, discoloration of the solder mask, scratches, etc

Ideally I would like to find the Rev 2 black PCB that has the bold key lettering and doesn't have the unnecessary 4 extra holes per switch. This one:

strict · « **Reply #26 on:** Thu, 24 July 2014, 19:56:01 »

Still looking for that elusive black PCB Phantom

strict · « **Reply #27 on:** Tue, 29 July 2014, 16:35:48 »

Missed out on so many artisan keys for sale or trade the last couple days. Someone should break this horrible losing streak and sell me a Clack!

strict · « **Reply #28 on:** Sat, 02 August 2014, 08:16:00 »

Come on get in the boat, Clack. Come on get in the boat, Click Clack.

strict · « **Reply #29 on:** Fri, 08 August 2014, 06:41:42 »

Maybe I should try doing a "jig" for a black phantom PCB, it seemed to work for the CC's

)

strict · « **Reply #30 on:** Tue, 12 August 2014, 12:55:33 »

Added WTB for a Granite set Blue enter key pack. If you've got one you aren't using please let me know, I would be willing to pay above retail for it (assuming new or like new condition)!

strict · « **Reply #31 on:** Fri, 15 August 2014, 13:54:01 »

Bumping. Also removed the Fauxluminum V2 as I'm pretty sold on the idea of getting a 55g Realforce.

strict · « **Reply #32 on:** Thu, 04 September 2014, 12:07:10 »

Added my JD40 and ErgoDox PCBs.

It makes me really sad to sell the JD40, its a phenomenal board but I just cant adjust to anything less than TKL. I've got an imgur album with a bunch of pictures from the build process here. Do note though, that after some of these pictures were taken, I went through and cleaned up some of the soldering and wires on and around the Teensy so what you will receive will look even cleaner and nicer. I also swapped out the Cherry plate stab for a Costar plate stab since I could never get the Cherry stab to feel like anything other than garbage.

I'm selling the ErgoDox PCBs for basically the same reason, I've come to realize I'm really only interested in TKL boards.

slip84 · « **Reply #33 on:** Thu, 04 September 2014, 12:26:19 »

Oooooh, gorgeous JD40. I wish I had the spare cash right now! Good luck with your sale.

dgneo · « **Reply #34 on:** Thu, 04 September 2014, 12:32:16 »

Gahhhhhhhhhhh I really want one of these, but I can't get over the Shift being on the left

I don't know why, but I never use the left side Shift.

EDIT: PM'd.

strict · « **Reply #35 on:** Thu, 04 September 2014, 16:25:28 »

ErgoDox has been sold

strict · « **Reply #36 on:** Sun, 07 September 2014, 08:02:31 »

Bump! If you buy the JD40 today I can have it shipped out first thing Monday morning and it should be in your hands before the end of the week

strict · « **Reply #37 on:** Wed, 10 September 2014, 17:09:03 »

SpAmRaY · « **Reply #38 on:** Wed, 10 September 2014, 19:35:57 »

Free bump, my things arrived very quickly and were packaged very well. Thanks again!

strict · « **Reply #39 on:** Sat, 13 September 2014, 15:44:38 »

Sad jd40 ... All packaged up and no where to go!

strict · « **Reply #40 on:** Wed, 17 September 2014, 18:05:52 »

strict · « **Reply #41 on:** Fri, 19 September 2014, 09:42:00 »

strict · « **Reply #42 on:** Mon, 22 September 2014, 19:08:19 »

bumpbumpbump

strict · « **Reply #43 on:** Fri, 26 September 2014, 12:16:55 »

Second price drop on the JD40

engicoder · « **Reply #44 on:** Fri, 26 September 2014, 13:19:43 »

Still looking for a black phantom?

admiralvorian · « **Reply #45 on:** Fri, 26 September 2014, 16:44:47 »

strict · « **Reply #46 on:** Fri, 26 September 2014, 18:08:54 »

JD40 has been sold!

Quote from: engicoder on Fri, 26 September 2014, 13:19:43

Still looking for a black phantom?

Not at the moment, thanks for the offer though

strict · « **Reply #47 on:** Sun, 05 October 2014, 07:56:32 »

phoenix1234 · « **Reply #48 on:** Sun, 05 October 2014, 09:44:44 »

Hello strict,

If you can get the stainless steel wire 1.2mm, you DIY a 7.x Costar wire.
Here is what I tested on while ago when I was waiting for a case GB.
I tested on stainless steel wire 1.0mm, the tools that I used are :
+ a pair long nose pliers to straighten the wire by twisting the two ends.
+ a flat nose pliers to bend the corner, it is very effective in this case.
+ a heavy duty cutting pliers to cut the stainless steel wire

* the middle is the DIY 7x Costar wire. It is imperfect but I believe we can tune it up depending on how picky we are. Note that the costing for doing this is very cheap (5m of 1.2mm stainless steel wire is only about 0.25 USD)
Hope it can help

strict · « **Reply #49 on:** Sun, 05 October 2014, 10:59:31 »

Quote from: phoenix1234 on Sun, 05 October 2014, 09:44:44

Hello strict,

If you can get the stainless steel wire 1.2mm, you DIY a 7.x Costar wire.
Here is what I tested on while ago when I was waiting for a case GB.
I tested on stainless steel wire 1.0mm, the tools that I used are :
+ a pair long nose pliers to straighten the wire by twisting the two ends.
+ a flat nose pliers to bend the corner, it is very effective in this case.
+ a heavy duty cutting pliers to cut the stainless steel wire
(Attachment Link)
* the middle is the DIY 7x Costar wire. It is imperfect but I believe we can tune it up depending on how picky we are. Note that the costing for doing this is very cheap (5m of 1.2mm stainless steel wire is only about 0.25 USD)
Hope it can help

Appreciate the info but I was really hoping someone out there had a spare they wouldn't mind parting with.

I had definitely considered making one after watching Listers tutorial but the only wire I can find locally is sold in 50ft spools and costs about $10. I would also have to get wire cutters that can handle that gauge ($10+) as well as a wire bender ($20). All told, I estimated my costs would be close to or above $40 just to get one stab wire for a layout I've never tried before (ANSI 150). I still may go this route if no one has a ready-to-go wire for sale and just make a whole bunch to sell to recuperate my investment.

News:

Author Topic: [H]BBv2s, CCs, KBKs, Springs, Switches, Plates, Gaterons [W]Powder Puff Blue BB (Read 38660 times)