geekhack
geekhack Marketplace => Classifieds => Topic started by: MandrewDavis on Fri, 26 August 2016, 22:57:23
-
For Sale:
Timestamp (https://imgur.com/a/G98Qt7L)
Dolch PAC w/ Gatistotle Switches:
•Plateless build w/ Leeku L3 PCB, Holtite (hotswap) sockets, GMK stabs, Aristotle stems in Gateron housings with 63.5g 24k SPRiT springs. External mini-usb port.
• Built this several years ago and barely used it, there is very little shine on the keycaps and a single noticeable scratch on the front. At the time I liked the idea of keeping the switches a vintage light clicky switch as they were a big improvement over the original MX blues.
• I would recommend adding a plate from TKC. Even though these are PCB mount switches, the combination of hot-swap and PCB mount isn't great for keycap alignment. I also had some issues with PCB and had to jump the Pause and Scroll Lock Asking $200 Shipped
Roadkit V2 PCB w/ 3D printed case
•Bought this for the PCB to use with alps switches but the LED orientation didn't work so I just made my own PCB. Case has recesses for MX switches to clip in. Asking $25 Shipped
Want to Buy:
Looking for white or black stock plastic FC660m cases, interested in grey, silver, or black for aluminum cases.
Items not listed have already been sold. Shoot me an offer if anything is off.
-
Reserved
-
Bump
-
PLZ I want to buy your stuff.
-
Added the OG Dolch and Z-Case for sale, plz buy my stuff.
-
Speed Bump
-
Price Drop on all items
-
I have a bunch of assorted GMK mods. What caps in particular are you looking for?
-
I have a bunch of assorted GMK mods. What caps in particular are you looking for?
Looking for stepped caps lock, tab and backspace keys. Keys that have white text are preferred. PM me :)
Sent from my LG-H810 using Tapatalk
-
Need a GMK tab key, Z-Case is still for sale. Looking for and Alps compatible Leeku PCB, not urgent though.
-
Still looking for a GMK tab key and a blank 2u 1976 key (brown). Lucked out an found a Model F locally!
-
PM'd
-
Question: Would the z-case house a Poker X? Is it pretty standard for 60% in general?
-
I would very much like to buy your stuffs
-
Still Looking for a GMK Stepped caps lock key
-
Bump
-
Still looking for a GMK Stepped Caps-Lock or Tab Key anything that isn't beige, or black.
-
I need some CLEAN White Alps with little to no binding.
-
BUMP
-
Searching for GMK Purple mods, added Bluegaloo to the listing
-
Bump for GMK Purple or TA Royal Alpha Mods
-
Bump
-
Bump for TA Royal Alpha Mods
-
Added Salmon Alps for sale
-
BUMP!
-
Pm'd
-
Bump
-
Need 10-15 Milky Gat Blues
-
BUMPEROO
-
Still need those
-
Need 10-15 Milky Gateron Switches, stem doesn't matter
-
New stuffs for sale
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
Price Drop
-
Bump
-
Price Dropped and New Timestamp added.
-
Bump
-
Need Yellow Alps and enabler PCBs
-
Bump
-
Bump
-
Bump
-
Pretty sure I have a few 2u enablers, let me look.
-
Pretty sure I have a few 2u enablers, let me look.
That would be awesome
-
Pretty sure I have a few 2u enablers, let me look.
That would be awesome
Sorry for the delay, I have 4 X 2u enablers. I thought I had more.
You want them? PM me if so.
-
"Vintage" Blue Stemz 4 sale, nede ur brokn numpadz
-
PM'd
-
YGPM. Please check!
-
Need ur broken PCBs.
-
Bump!
-
Bumping the steel plate!
-
• Homemade AEK plate. This was cut from an AEK and will fit any standard size 60 case. It is not recommended for use with any floating key designs but is not even noticeable with a high profile case. Asking $5??? Can include the original set of stabilizers free of charge. A 60% set of ultrasonic cleaned AEK II caps with a chipped spacebar can be added for an additional $20. First time using jigsaw Pending
It'll take that homemade AEK 60% plate w/stabs if the pending sale falls through.
-
Bump for Apple Desktop Bus KB keycaps.
-
Bump
-
Bump!
-
Sold:
•105x R2 67g Zealios $87
•101x White Alps harvested from Monterey 104 $30
•One full set of OG Dolch Keycaps $80
•Orange, Low-profile Z-Case $20
•Chicony 5981 $55
•Vintage Blue Stems $20
•Massdrop Infinity Steel Plate $25
These prices included shipping and fees within the CONUS.
Thank you for leaving the sold prices up.
I wish everyone would - it makes it easier to judge what you can sell similar items for.
-
Bump!
Sold:
•105x R2 67g Zealios $87
•101x White Alps harvested from Monterey 104 $30
•One full set of OG Dolch Keycaps $80
•Orange, Low-profile Z-Case $20
•Chicony 5981 $55
•Vintage Blue Stems $20
•Massdrop Infinity Steel Plate $25
These prices included shipping and fees within the CONUS.
Thank you for leaving the sold prices up.
I wish everyone would - it makes it easier to judge what you can sell similar items for.
Some of these items were sold on a bit of the low side, but I figured it could be helpful.
-
Bump, Price Dropped!
-
Added Vintage Blue Stems for sale, Price Dropped on Alpine Winter
-
Bump, price drop, added AEKII caps for sale.
-
Bump
-
Price Drops
-
Not dropping the price on Alpine Winter past this
-
Bump
-
Sent a PM.
-
Orange Alps for sale!
-
GMK Carbon For Sale!
-
Price DROP
-
Looking for PCB mount vintage blacks.
-
Bump
-
Bump
-
Leeku 1800 PCB Plz
-
Still looking
-
Have you contacted leeku via email? I think he still have some of them.
Sent from my iPhone using Tapatalk
-
Have you contacted leeku via email? I think he still have some of them.
I have, and at the time he had no stock. I joined a Leeku 1800 GB in January, but delivery has been continuously postponed, seemingly due to the TX-1800 groupbuy. I expect that contacting Leeku at this point would have a similar completion timeline.
Just posting here in the case someone has an extra on hand, I would have liked to build my Dolch Pac several months ago.
-
Have you contacted leeku via email? I think he still have some of them.
I have, and at the time he had no stock. I joined a Leeku 1800 GB in January, but delivery has been continuously postponed, seemingly due to the TX-1800 groupbuy. I expect that contacting Leeku at this point would have a similar completion time.
Just posting here in the case someone has an extra on hand, I would have liked to build my Dolch Pac several months ago.
Ohh i see. Good luck then
-
Bump
-
I purchased an extra Leeku PCB with my TX-CP, think someone in the GB thread said kin is planning on shipping next week. Guess I can check in with you next week to see if there's still interest.
-
RK-9000 for sale!
-
Bump
-
Price Drop
-
Need TeckKeys Krytox
-
pming
-
Bump
-
You could try this:
http://www.switchtop.com/product/geekhackers-switch-lube
-
You could try this:
http://www.switchtop.com/product/geekhackers-switch-lube
Yeah, that would work just as good, I am just being neurotic. Was halfway through building my keyboard before running out of lube. I'm getting irrationally anxious over the keys not being uniform in feel.
I should contact mkawa to see if the krytox distributed through switchTop is the same 206/1506 mix as TechKeys.
Edit: Not the same
-
Bump
-
Bump
If you want 204/1504 - I have kits that you can mix to get the feel you want. Not sure if you're interested but figured I'd drop a note in case since you seem anxious!
-
Bump
-
Added the Zenith and white alps parts for sale.
-
Bump
-
Need Bluefruit EZ key plz
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
Hey man, you still have those Yuri sets?
-
Bump
-
Price Drop
-
Bump
-
Pm
-
Price Drop
-
I have a handful of novatouch sliders i dont know the exact amount right now but i can check after work. Its at least 15+ if you are interested
-
Bump
-
Bump
-
Looking for some Novatouch spacebar stabilizer inserts
-
Looking for some Novatouch spacebar stabilizer inserts
-
BUUUMP
-
Bump
-
Bump, new stuff for sale
-
Pm
-
bump
-
bump
If I may ask, how does the Internal Hasu USB-USB on the RF work? I would want to replace the cable on my RF for something that works with my current USB cables.
-
bump
If I may ask, how does the Internal Hasu USB-USB on the RF work? I would want to replace the cable on my RF for something that works with my current USB cables.
It works exactly the same as a stock USB-USB except that it was modified so that it can be moved inside the case between the stock cable and pcb.
-
It works exactly the same as a stock USB-USB except that it was modified so that it can be moved inside the case between the stock cable and pcb.
So from what I see, you cut off the original USB cable, soldered that directly onto the Hasu USB-USB, and then extended the other end to the center of the case? Do you have a build log or any additional pictures of how that ended up?
-
It works exactly the same as a stock USB-USB except that it was modified so that it can be moved inside the case between the stock cable and pcb.
So from what I see, you cut off the original USB cable, soldered that directly onto the Hasu USB-USB, and then extended the other end to the center of the case? Do you have a build log or any additional pictures of how that ended up?
No build log, but I did do a little write-up (https://geekhack.org/index.php?topic=69169.msg2597303#msg2597303) here. The male and female USB A connectors were de-soldered and replaced with male and female JST connectors. The stock cable plugs into the converer and the converter then plugs into the PCB. I prefer writing my own keymap in TMK but Hasu does have a web configurator (http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?usb_usb)that works. There were zero modifications to the board itself.
-
Pm'd :)
-
bump
-
Bump
-
bump
-
Need IBM 5140 Keyset
-
Need KBD66, Found IBM 5140 Keyset
-
Bump
-
Need some Novatouch Spacebar Stabilizer Housings
-
Offering Novatouch Sliders now
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
BUMP
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump
-
BUMP
-
Bump
-
Bump
-
bump
-
Bump
-
Bump :/
-
Bump
-
Bump
-
Bump
-
Bump
-
Bump!
-
Not sure if you're still looking for a FC660M case but I have a brand new black one available with box, screws, upper and lower piece. I don't really have a price in mind so let me know what you think is fair and if I like it, it's yours.
(https://i.ibb.co/sHXVsgc/20211205-202758.jpg) (https://ibb.co/tX1JYHn)
(https://i.ibb.co/rbfRwRx/20211205-202714.jpg) (https://ibb.co/WDp424k)
(https://i.ibb.co/JyGk4Kt/20211205-202700.jpg) (https://ibb.co/CMY0Zz8)
(https://i.ibb.co/3s7pBk0/20211205-202643.jpg) (https://ibb.co/X4b7SVz)
-
Not sure if you're still looking for a FC660M case but I have a brand new black one available with box, screws, upper and lower piece. I don't really have a price in mind so let me know what you think is fair and if I like it, it's yours.
Replied via PM
-
Bump