Author Topic: [IC] A 65% keyboard with Ortholinear Keyboards (Read 8044 times)

kht120 · « **on:** Thu, 09 April 2015, 19:01:52 »

I went with a 65% layout that still uses common key sizes, no 2.0 shift bars, 6.0 space bars, or other uncommon sizes
The Google Docs form is here.

Data · « **Reply #1 on:** Thu, 09 April 2015, 19:21:19 »

I'm confused. How does Ortholinear fit in?

This looks like a pretty standard 65% layout to me. Also you've got two Caps Locks on your mockup and your link at the end just points to your image.

kht120 · « **Reply #2 on:** Thu, 09 April 2015, 19:25:37 »

Ortholinear is making it. I just put the Cap Lock in as a placeholder of sorts, it can be any 1.75u key you want!

metalliqaz · « **Reply #3 on:** Thu, 09 April 2015, 19:28:20 »

Quote from: kht120 on Thu, 09 April 2015, 19:25:37

Ortholinear is making it. I just put the Cap Lock in as a placeholder of sorts, it can be any 1.75u key you want!

Like... Shift?

Joey Quinn · « **Reply #4 on:** Thu, 09 April 2015, 19:29:56 »

Quote from: metalliqaz on Thu, 09 April 2015, 19:28:20

Quote from: kht120 on Thu, 09 April 2015, 19:25:37
Ortholinear is making it. I just put the Cap Lock in as a placeholder of sorts, it can be any 1.75u key you want!

Like... Shift?

Or Control.

Data · « **Reply #5 on:** Thu, 09 April 2015, 19:43:28 »

Quote from: kht120 on Thu, 09 April 2015, 19:25:37

Ortholinear is making it. I just put the Cap Lock in as a placeholder of sorts, it can be any 1.75u key you want!

So... Are you working with Jack then, or ??

You're not giving us a lot of information here.

neverused · « **Reply #6 on:** Thu, 09 April 2015, 19:50:23 »

The title can be quite misleading.

That double capslock... Even if it is a place holder

Plus that still would leave you needing unconventional keys for most use cases.

ImDaBaron · « **Reply #7 on:** Thu, 09 April 2015, 21:09:23 »

I told him to post more info on here(not sure I can link other forums in here but it's on reddit) .

jackhumbert · « **Reply #8 on:** Thu, 09 April 2015, 23:30:32 »

Hey! kht120's gathering interest and I'm designing/making them.

They're the same basic construction as the Atomic/Planck, but bigger and staggered-er. I'll likely use the same bases/cases for an ortholinear 65% in the future.

tjweir · « **Reply #9 on:** Fri, 10 April 2015, 10:40:23 »

Looks awesome, I'm interested.

Joey Quinn · « **Reply #10 on:** Fri, 10 April 2015, 11:05:55 »

Quote from: ImDaBaron on Thu, 09 April 2015, 21:09:23

I told him to post more info on here(not sure I can link other forums in here but it's on reddit) .

I approve of your avatar.

On topic, I may be down for a 65% if it's alps compatible.

ImDaBaron · « **Reply #11 on:** Fri, 10 April 2015, 13:11:47 »

Quote from: Joey Quinn on Fri, 10 April 2015, 11:05:55

Quote from: ImDaBaron on Thu, 09 April 2015, 21:09:23
I told him to post more info on here(not sure I can link other forums in here but it's on reddit) .

I approve of your avatar.

On topic, I may be down for a 65% if it's alps compatible.

Another Clerks fan

(Berserker!)

I believe he said in the Reddit thread that it would be.

Data · « **Reply #12 on:** Fri, 10 April 2015, 13:14:14 »

Quote from: jackhumbert on Thu, 09 April 2015, 23:30:32

Hey! kht120's gathering interest and I'm designing/making them.

They're the same basic construction as the Atomic/Planck, but bigger and staggered-er. I'll likely use the same bases/cases for an ortholinear 65% in the future.

He still hasn't fixed the link at the end of his post (OP). If that Google form is supposed to be for gathering interest it's not doing a whole lot of good right now...

Just thought you should know.

jackhumbert · « **Reply #13 on:** Fri, 10 April 2015, 13:19:55 »

Quote from: Data on Fri, 10 April 2015, 13:14:14

Quote from: jackhumbert on Thu, 09 April 2015, 23:30:32
Hey! kht120's gathering interest and I'm designing/making them.

They're the same basic construction as the Atomic/Planck, but bigger and staggered-er. I'll likely use the same bases/cases for an ortholinear 65% in the future.

He still hasn't fixed the link at the end of his post (OP). If that Google form is supposed to be for gathering interest it's not doing a whole lot of good right now...

Just thought you should know.

Shoot - here's the link: https://docs.google.com/forms/d/16Wy6ZNnyTc0fhbV8TSSl-eliDL1lqX5Kvx9248yOwOk/viewform

He's gotten over 30 people interested, so I'm gonna move forward with getting things setup to sell them in my shop!

ImDaBaron · « **Reply #14 on:** Fri, 10 April 2015, 13:47:32 »

Looks like way over 30 people now. I think atleast 50.

simonyunhe · « **Reply #15 on:** Sat, 11 April 2015, 00:52:22 »

This one looks good, one concern is if i can mapping the keys by my self?

Hopefully this come into the GB.

jackhumbert · « **Reply #16 on:** Fri, 17 April 2015, 09:47:25 »

They're for sale now!

http://ortholinearkeyboards.com/neutrino-top-plate
http://ortholinearkeyboards.com/neutrino-bottom-plate

I will be placing a generous order for them next week.

ImDaBaron · « **Reply #17 on:** Fri, 17 April 2015, 12:35:41 »

The hand wiring kit too right? I'm a little unsure of which keycaps are which on there.(atleast from the ones in the pictures)

jackhumbert · « **Reply #18 on:** Fri, 17 April 2015, 12:58:38 »

Quote from: ImDaBaron on Fri, 17 April 2015, 12:35:41

The hand wiring kit too right? I'm a little unsure of which keycaps are which on there.(atleast from the ones in the pictures)

Yeap! Sorry, the hand-wiring kit doesn't include keycaps. I've updated the image to make a little more sense

I'll be adding blank Neutrino keycaps next week sometime - I'm still working out the price for them. They'll just be the ones here though: http://keyshop.pimpmykeyboard.com/products/full-keysets/dsa-blank-sets-1

tjweir · « **Reply #19 on:** Fri, 17 April 2015, 13:52:50 »

Jack, thanks for putting all of this together.

Is there any way you can look into more economical shipping to Canada?

jackhumbert · « **Reply #20 on:** Fri, 17 April 2015, 14:09:38 »

Quote from: tjweir on Fri, 17 April 2015, 13:52:50

Jack, thanks for putting all of this together.

Is there any way you can look into more economical shipping to Canada?

Yeah! It mostly depends on what you're ordering - if it's just plates & small stuff and no keyswitches, I can probably bring shipping down to 10USD. The more expensive shipping is to cover the heavier, bigger things. If you wanna checkout, then shoot me an email, I'll refund you right away.

abjr · « **Reply #21 on:** Fri, 17 April 2015, 14:39:10 »

Would you be making a formed bottom plate or milled case at all for the Neutrino?

Edit: Disregard my previous edit.

jackhumbert · « **Reply #22 on:** Fri, 17 April 2015, 16:36:39 »

Quote from: abjr on Fri, 17 April 2015, 14:39:10

Would you be making a formed bottom plate or milled case at all for the Neutrino?

Edit: Disregard my previous edit.

Eventually! Right now, I'm mostly gauging how many people will purchase them. I'm gonna be introducing an ortholinear layout of this size eventually, and the cases will be compatible with the Neutrino ones.

ImDaBaron · « **Reply #23 on:** Fri, 17 April 2015, 16:38:03 »

Quote from: jackhumbert on Fri, 17 April 2015, 16:36:39

Quote from: abjr on Fri, 17 April 2015, 14:39:10
Would you be making a formed bottom plate or milled case at all for the Neutrino?

Edit: Disregard my previous edit.

Eventually! Right now, I'm mostly gauging how many people will purchase them. I'm gonna be introducing an ortholinear layout of this size eventually, and the cases will be compatible with the Neutrino ones.

I'll be sending my order in shortly

doodersbrother · « **Reply #24 on:** Sun, 26 April 2015, 23:09:56 »

I am also interested in a milled case for the Neutrino if it ever comes to fruition

News:

Author Topic: [IC] A 65% keyboard with Ortholinear Keyboards (Read 8044 times)