« previous next »
Pages:  [1]     Go Down

Author Topic: 60 percent pcb recommendation  (Read 2391 times)

0 Members and 1 Guest are viewing this topic.

Offline kgolden

  • Thread Starter
  • Posts: 100
60 percent pcb recommendation
« on: Sun, 11 February 2018, 14:54:59 »
... Okay I'm looking for a recommendation for a 60 percent pcb. The GH60 looks good but I am unsure. Is the green one the same as the black one that is for sale on techkeys? LEDs are not a requirement. Thanks in advance.  :thumb: oh and what is a good plate for 60%? I like stainless but the brass one on 1UP looks pretty slick.
Logged

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: 60 percent pcb recommendation
« Reply #1 on: Sun, 11 February 2018, 15:28:48 »
Yes, the green GH60 is the same as the black one being sold at Techkeys. Those are “real” GH60 PCBs, as opposed to the “Satan” or “Rev.CHN” versions, which I consider knockoffs or fakes. The real GH60 was designed by komar and me with input from the community.

And the universal 60% plates sold at 1UP and at Mekanisk are both my designs as well. I would recommend either. :)
Logged
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam
"When I was a kid, I used to take things apart and never put them back together."

Offline kgolden

  • Thread Starter
  • Posts: 100
Re: 60 percent pcb recommendation
« Reply #2 on: Sun, 11 February 2018, 16:32:44 »
Good lord man, are there any you don t help design?  :)) again thank you. Are you on OCN? I thought I saw a Jdcarpe there quite some time ago.
Logged

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: 60 percent pcb recommendation
« Reply #3 on: Sun, 11 February 2018, 16:34:55 »
I have an account there, but I haven’t visited in quite a while. :)
Logged
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam
"When I was a kid, I used to take things apart and never put them back together."

Offline kgolden

  • Thread Starter
  • Posts: 100
Re: 60 percent pcb recommendation
« Reply #4 on: Mon, 12 February 2018, 13:14:23 »
Alrighty... a bought a GH60 from techkeys. Looks like it'll fit my needs quite well. Thanks
Logged

Offline kgolden

  • Thread Starter
  • Posts: 100
Re: 60 percent pcb recommendation
« Reply #5 on: Wed, 14 February 2018, 14:22:21 »
So 1up seems to only have the hhkb plate in stock and mekanisk doesn't seem to have any plates available. Who else would have a stainless steel or brass plate for a poker layout? Or maybe it's easier to have one cut?
Logged

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: 60 percent pcb recommendation
« Reply #6 on: Wed, 14 February 2018, 19:56:09 »
Quote from: kgolden on Wed, 14 February 2018, 14:22:21
So 1up seems to only have the hhkb plate in stock and mekanisk doesn't seem to have any plates available. Who else would have a stainless steel or brass plate for a poker layout? Or maybe it's easier to have one cut?

I wish I had known this about 8 hours ago. I would have sent you a plate with that other stuff I mailed out to you today. :(
Logged
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam
"When I was a kid, I used to take things apart and never put them back together."

Offline kgolden

  • Thread Starter
  • Posts: 100
Re: 60 percent pcb recommendation
« Reply #7 on: Wed, 14 February 2018, 21:26:26 »
Oh man.. No worries. You are too generous as it is. Really though, you are too kind.  :thumb: I am just exploring all things 60% keyboard related. GH60 pcb will be here Saturday and once I decide on having a plate cut or buying one somewhere online then I'll order it. But I'm not in a rush to complete it,  :)) still need to finish the TKL. I will cut the base plate when i go back to work, I'm currently on vacation and won't have access to our shop until another week and a half. ...but once the gh60 pcb comes, i may speed things up because I'm too excited to build it. Haha
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: 60 percent pcb recommendation
« Reply #8 on: Wed, 14 February 2018, 21:53:00 »
Quote from: kgolden on Wed, 14 February 2018, 14:22:21
So 1up seems to only have the hhkb plate in stock and mekanisk doesn't seem to have any plates available. Who else would have a stainless steel or brass plate for a poker layout? Or maybe it's easier to have one cut?
I can possibly help with this PM me what you need exactly.

Sent from my SM-G930V using Tapatalk
Logged

Offline kgolden

  • Thread Starter
  • Posts: 100
Re: 60 percent pcb recommendation
« Reply #9 on: Fri, 16 February 2018, 13:32:26 »
My GH60 rev. C in black arrived today from techkeys... Wow what a beautiful board. A few other things came today which I'll share at a later time, Thanks JD!

GH60:
Logged
Pages:  [1]     Go Up
« previous next »