What colors are you guys getting? Debating black or silver.I think people mostly liked gray and black according to CLS tkl GB but I'm personally only going for silver since I don't have a silver board yet.
Submitted. :thumb:
Also pmed for a change in my order.
Form kinda confused me, but all in all, I went for two PC plates and two pcbs.
Order submitted! I PM'ed you regarding an amendment to my order - added an extra PCB by mistake.
I think 75% looks best in black. This is very nice looking kit but a little too rich for my blood.I do agree that black looks the best on 75%, I probably would have went for black if I didn't already have a black 75% that's coming soon.
LZ bag :cool:No, Normal pcb mount type.
Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
LZ bag :cool:No, Normal pcb mount type.
Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
Sure, choose colours and q'ty
pm me
Yes, Pm me.LZ bag :cool:No, Normal pcb mount type.
Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
Sure, choose colours and q'ty
pm me
These switch film looks very nice, what's the material, and can I order them without ordering the lz CLSm ?
Hello everyone,
Scound GB
This group buy is for a LZ CLSm
for the Classic 75%
Your opinion on the polycarbonate switch plate? Is it good with clicky blue switches?
Your opinion on the polycarbonate switch plate? Is it good with clicky blue switches?
Polycarb offers a much softer bottomout than metal alternatives -- I recommend it with linears above other options.
Done It;
LZ CLSm
Order Completed.
:thumb:
LZ bag :cool:No, Normal pcb mount type.
Are the Cherry stabilizers of the screw-in type?
Can we also order switch films? I saw some here: https://lzlife.tistory.com/entry/Switch-Film-for-mx-switch
Sure, choose colours and q'ty
pm me
Just to be clear, the polycarbonate plate is different from the defuser correct? I can use a steel plate and a defuser at the same time?Yes, the polycarbonate plate is a switch plate, whereas the diffuser is to show off the RGB underglow.
Very excited about this GB!
Could anyone point me a place I can buy under glow led for the diffuser? What model do I need?
Could anyone point me a place I can buy under glow led for the diffuser? What model do I need?
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Thanks for these answers LZ. How much are the extra bags?
Extra bag : 30usd/eachSwitch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Thanks for these answers LZ. How much are the extra bags?
Hi LifeZ, can I just get the bag? Don't have the money for the keyboard itself :(Hello, just bag is contect kin25. He have many bag. Other type.
Hey LZ, I need to make a change to my order. Should I submit a new form or just PM you the update?Okay. Pm to me
Sent from my iPhone using Tapatalk
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Switch films 1pack(110~120ea) : 5usd
Extra acrylic diffuser 1ea : 5usd
1 LZ bag is around weight 800g
Shipping fee up 15%
Hi! Can I have 1 pack of switch films and 1 acrylic diffuser with my order? I just ordered, but I made a mistake and would like to have a silver case rather than grey. If you can change my details, that would be great!
Will the bags have the LZ logo on the zipper latches or Kin's TX logo?
Just asking because I might need a matching 75% TX bag in the future.
All the boards already come with one, same with CLS TKL. So you really only need to PM if you want extras. :thumb:Will the bags have the LZ logo on the zipper latches or Kin's TX logo?
Just asking because I might need a matching 75% TX bag in the future.
WAIT ON.... :o
He's actually selling a bag to go with the LZ CLSm?
PMing him now about this...... :thumb: :thumb: :thumb: :thumb:
are the invoices out yet?
Won't non-anodized aluminum slowly oxidize?
Thx! Good to know! Hope this GB go well. :p
LZ,
Just to make sure, the LZ CLSM comes with a free diffuser, correct?
This form is no longer accepting responses, and has been set to automatically close by lifezone2@gmail.com
Please confirm your order.
Order deadline 2017-10-15
Order Check (https://goo.gl/v9JDxC)
Order looks good. Thanks for the update. Now if I could only hit fast forward on the calendar.
Looks good but the order form said non-ano $425 is that still correct? Not a deal breaker but every little helps!Please confirm your order.
Order deadline 2017-10-15
Order Check (https://goo.gl/v9JDxC)
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)It does support winkey as seen on the layouts pic and the cutouts on the polycarbonate plate.
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)Support bot row check~
Think I'd probably get in on this if the bottom row had support for 3 keys left of the space bar instead of 2. (Winkey, the IC thread shows support for it but here it does not)Support bot row check~
https://geekhack.org/index.php?action=dlattach;topic=91775.0;attach=179189;image
ConfirmedPlease confirm your order.
Order deadline 2017-10-15
Order Check (https://goo.gl/v9JDxC)
Mine looks good
Sent from my SM-N950U1 using Tapatalk
Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?Mine looks good
Sent from my SM-N950U1 using Tapatalk
Hey, plz check your order. yellow mark!
Base kit 1 include 1 switch plate.Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?Mine looks good
Sent from my SM-N950U1 using Tapatalk
Hey, plz check your order. yellow mark!
Sent from my SM-N950U1 using Tapatalk
Then one additional aluminum plate. I hope that clears it upBase kit 1 include 1 switch plate.Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?Mine looks good
Sent from my SM-N950U1 using Tapatalk
Hey, plz check your order. yellow mark!
Sent from my SM-N950U1 using Tapatalk
Your order 2 base kit but 1 switch plate choose. More 1 base plate
okay, base 2 kit include alu switch plate and extra pc plate + pcb, right??Then one additional aluminum plate. I hope that clears it upBase kit 1 include 1 switch plate.Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?Mine looks good
Sent from my SM-N950U1 using Tapatalk
Hey, plz check your order. yellow mark!
Sent from my SM-N950U1 using Tapatalk
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Sent from my SM-N950U1 using Tapatalk
Yes thank youokay, base 2 kit include alu switch plate and extra pc plate + pcb, right??Then one additional aluminum plate. I hope that clears it upBase kit 1 include 1 switch plate.Sorry about that. I meant to order two extra PCBs and then one extra STS switch plate and one extra Polycarbonate switch plate. Does that clear the issue up?Mine looks good
Sent from my SM-N950U1 using Tapatalk
Hey, plz check your order. yellow mark!
Sent from my SM-N950U1 using Tapatalk
Your order 2 base kit but 1 switch plate choose. More 1 base plate
Sent from my SM-N950U1 using Tapatalk
For some reason, a few people PM'd me last night asking to change order details.
Don't do that. I'm not involved with this GB.
Sorry to bother, but I do not understand how to confirm my order.
Order looks good.
INVOICE SENT~~@@ ;)
Order confirmed and invoice paid! Thanks again for letting me in after the gform closed :thumb:
Very excited as this is my first keyboard group buy. Hoping for a smooth production run in these coming months!
Order confirmed and invoice paid! Thanks again for letting me in after the gform closed :thumb:
Very excited as this is my first keyboard group buy. Hoping for a smooth production run in these coming months!
A LZ board as your first custom? You're in for a beautiful board. Great choice! :thumb:
Thanks! I'm just hoping that my desk will be able to support the extra weight as this will be much heavier than my current KBD75 :D
Am I too late?
It's Oct 14th where I am, and the form says closed. :(
The payment thus far has been BRILLIANT.
Hi LZ, any updates with this GB? Can't wait for it!
Hi LZ, any updates with this GB? Can't wait for it!
I'm waiting for this as well but I suspect we need to give LZ some time off, due to the current date being about under two weeks away for Christmas.
Suspect he has a family that would like to see him there celebrating this time of year instead of being at the factory finishing off our keyboards. If we wouldn't work over the holiday's why condemn LZ to do that?
Even though I will be working up to the 21st this year, I do get a few days off to see my family but far better to give LZ some time off and look forward to receiving our keyboards during 2018.
Hi LZ, any updates with this GB? Can't wait for it!
I'm waiting for this as well but I suspect we need to give LZ some time off, due to the current date being about under two weeks away for Christmas.
Suspect he has a family that would like to see him there celebrating this time of year instead of being at the factory finishing off our keyboards. If we wouldn't work over the holiday's why condemn LZ to do that?
Even though I will be working up to the 21st this year, I do get a few days off to see my family but far better to give LZ some time off and look forward to receiving our keyboards during 2018.
Production is being done without problems.
It is a bit busy at the end of the year.
And it is Christmas and my birthday Christmas Eve . hahahaaaaaaa ;D
Production is being done without problems.
It is a bit busy at the end of the year.
And it is Christmas and my birthday Christmas Eve . hahahaaaaaaa ;D
UPDATE.
CNC 70%
SWITCH PLATE 40%
PCB 90%
BAG 90%
UPDATE. Feb.02
CNC 90% (Waiting for 1st inspection)
SWITCH PLATE 100%
PCB 100%
BAG 100%
I see CF plates are available?
http://lzlife.tistory.com/361
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water) ;D
(Attachment Link)
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water) ;D
(Attachment Link)
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water) ;D
(Attachment Link)
Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB :thumb:
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water) ;D
(Attachment Link)
Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB :thumb:
Can’t wait to get this board!
BTW, how can you read Korean “Mocha gold” in that pic?
update. 2018.02.26
1. Completed anodizing (Waiting for inspection)
2. Sorting basic parts (Switch plate, PCB, Acrylic diffuser, and Accessories)
And I put Korean mix coffee as a gift. (Use 120 ml of hot water) ;D
(Attachment Link)
Mocha gold, that's the best instant coffee I've ever tried
now I REALLY wish I got in on this GB :thumb:
Can’t wait to get this board!
BTW, how can you read Korean “Mocha gold” in that pic?
also, I've had it before and recognize the package
OMG....
Instant coffee not allowed in country.
I will checking.... lol. :eek:
OMG....
Instant coffee not allowed in country.
I will checking.... lol. :eek:
it's fine for Singapore hehe
OMG....
Instant coffee not allowed in country.
I will checking.... lol. :eek:
it's fine for Singapore hehe
Not OK in Australia! LZ please, do not use fruit boxes for shipment to Australia this time.
No coffee for everyone or just for Australia?
Sent from my iPhone using Tapatalk
Are there any extras LZ? Didnt get on the original buy :(
Sorting...
My home is hell ...
(Attachment Link)
Sorting...
My home is hell ...
(Attachment Link)
Today R1 delivery.
(Attachment Link)
Today R1 delivery.
(Attachment Link)
A raw CLSm out in the wildSame here. Fellow sg. Haha
http://kbdlab.co.kr/index.php?document_srl=5070523&mid=board_Lsno50
A raw CLSm out in the wildSame here. Fellow sg. Haha
http://kbdlab.co.kr/index.php?document_srl=5070523&mid=board_Lsno50
Sent from my iPhone using Tapatalk
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490
Looks like the quality has gone up a tick over CLS. Very impressed.
Picture of a black one: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=5073490
Looks like the quality has gone up a tick over CLS. Very impressed.
Agreed, but it's a gray one - my mistake. Can't wait to see the silver and black ones!
I completely forgot. Do we get a bag with the kit?
Cool. Looking forward to see your build either here or in FB group. HeheShow Image(https://i.imgur.com/5Mg14Ed_d.jpg)
Awww yeaaaa
I completely forgot. Do we get a bag with the kit?
Yeah, it comes with a bag. Glad I went with Silver :DShow Image(https://i.imgur.com/dydbhZK.jpg)Show Image(https://i.imgur.com/eIMApCM.jpg)
gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up. :'(
Huh, looks like mailman went for another run. Thanks for the smooth GB LZ!gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up. :'(
Same here, but considering I have a screen door I know for fact they just didn't bother to attempt delivery in the first place - been waiting for them all day.
Huh, looks like mailman went for another run. Thanks for the smooth GB LZ!gah, the mailman didn't ring my doorbell so I missed it. Might have to wait til tomorrow to pick it up. :'(
Same here, but considering I have a screen door I know for fact they just didn't bother to attempt delivery in the first place - been waiting for them all day.
Got mine too. It's perfect. Thanks, LZ. Can we build it without the diffuser?
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Got mine too. It's perfect. Thanks, LZ. Can we build it without the diffuser?
I built mine without the diffuser. Actually I'm unsure as to how the diffuser is supposed to sit between the top and bottom part. Will appreciate if someone can show me how it should align.
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
You have to break that part off. It’ll take a bit of pressure, so be careful.
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
You have to break that part off. It’ll take a bit of pressure, so be careful.
Got it. Thanks guys!Show Image(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)
Sent from my iPhone using Tapatalk
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
You have to break that part off. It’ll take a bit of pressure, so be careful.
Got it. Thanks guys!Show Image(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)
Sent from my iPhone using Tapatalk
Hey guys, relatively newb question - is the switch plate supposed to be screwed into the top before mounting the PCB and/or diffuser?
Mount the stabs on the PCB. Then add the plate and switches.
Once you've done soldering it all together screw the plate into the top half.
I did that last night but I'm getting hung up on how to screw the plate into the top half when it's blocked by the PCB.Show Image(https://uploads.tapatalk-cdn.com/20180308/a9c19670617d0aadd595f76c396017b2.jpg)
Sent from my iPhone using Tapatalk
You have to break that part off. It’ll take a bit of pressure, so be careful.
Got it. Thanks guys!Show Image(https://uploads.tapatalk-cdn.com/20180308/8eee28e148f7a43cf4d5f2fc6474d415.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/b28af5370ef7b3f556fd1ee223f40ede.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180308/f7a66b84330bcfcf9494ac76d10204c0.jpg)
Sent from my iPhone using Tapatalk
is this grey? looks amazing!
Hi LZ! Any estimate on when the remaining boards will ship?
Got mine too. It's perfect. Thanks, LZ. Can we build it without the diffuser?
I built mine without the diffuser. Actually I'm unsure as to how the diffuser is supposed to sit between the top and bottom part. Will appreciate if someone can show me how it should align.
You've got to snap out the middle bit and then break the cut-out for the USB port (see pic).
Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
Got any ideas? Not really well versed when it comes to working on these stuff. Worried that I'll just end up doing more damage to it.Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
That should be possible to straighten at least.
Got any ideas? Not really well versed when it comes to working on these stuff. Worried that I'll just end up doing more damage to it.Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
That should be possible to straighten at least.
Finished building it up today, PC plate is really interesting to type on :). I'll see if I can get some decent pics of the finished build tomorrow.
One thing I noticed though is that the brass weight seems to be bent, causing it to not be flush on the bottom side of the board. Anyone else seen this with their board?
My weight is also bent when removed but I found if I held it firmly in place so flat then screwed it in tightly it was fine. I'm sure you would have noticed but are you certain it's screwed in fully?Yeah, I screwed it on nice and tight, but it's still protruding in the middle. Guess I'll try and figure out a way to fix it.
Did you guys got any tracking numbers? The boards have been marked as shipped for a couple weeks now.Yeah, I got the automated email from paypal when the label is created.
Yeah, I got the automated email from paypal when the label is created.
Show Image(http://i.imgur.com/BzXzYDF.jpg)
I'm glad I bought an LZ as a first Korean Custom. Absolutely stunning board. Thank you so much LZ!
Show Image(http://i.imgur.com/BzXzYDF.jpg)
I'm glad I bought an LZ as a first Korean Custom. Absolutely stunning board. Thank you so much LZ!
Miami Nights is totally underrated
very nice, good pick as a first kustom
LZ is good people
Nice CLSm
Miami Nights is totally underrated
Here is my raw CLSm polished up with gmk bob, on box navy switches....You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Here is my raw CLSm polished up with gmk bob, on box navy switches....Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Here is my raw CLSm polished up with gmk bob, on box navy switches....You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Here is my raw CLSm polished up with gmk bob, on box navy switches....You might wanna get that clear anodized. Can polish it for the same finish as in the pics, but no tarnish or flaking :smile:Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Here is my raw CLSm polished up with gmk bob, on box navy switches....Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Looks awesome
Here is my raw CLSm polished up with gmk bob, on box navy switches....Show Image(https://i.imgur.com/IsNjrRA.jpg)Show Image(https://i.imgur.com/MFA0nA1.jpg)Show Image(https://i.imgur.com/UAYWYpG.jpg)Show Image(https://i.imgur.com/qsusW14.jpg)
love it ;D
Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
AWESOME!!! :thumb:
Any chance of round 2 for 75%?Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
AWESOME!!! :thumb:
Any chance of round 2 for 75%?Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
AWESOME!!! :thumb:
kevinlim02 on reddit is selling his CLSm kit w/ PC plate
CLSm is only one time.Any chance of round 2 for 75%?Show Image(https://i.imgur.com/0cJIPzz.jpg)Show Image(https://i.imgur.com/WWb0jKv.jpg)
LZ-CLSm, the best 75 layout keeb I've ever seen
AWESOME!!! :thumb:
kevinlim02 on reddit is selling his CLSm kit w/ PC plate
Definitely saw the post. Price of $750 was the main reason for hesitating. I understand exclusivity so contemplating heavily whether to just buy or pray for a possible round 2 in the future unless LZ boards are a one time production run only?
Does anyone know of any potential replacement PCBs that will fit into this case?
Also, I have 2 alu plates for sale if anyone is interested in.