[url=https://discord.gg/XBPmZXR][img width=384 height=120]https://cdn.discordapp.com/attachments/746117506556625046/752061430974513242/getawaybanner.png[/img][/url]
Please consider minivan support for this keyset. Thanks!Sorry no can do, due to previous drama supporting that one specific board brings me great pain. Maybe next time :0
I love the pcb art
I just honestly want this, purely for the design.
Interested, any plans for an alternate layout option to the default backspace layout?
Sent from my iPhone using Tapatalk
Yes, correct, or even 2 1Us as a 1.75U alternative.Interested, any plans for an alternate layout option to the default backspace layout?
Sent from my iPhone using Tapatalk
are you asking about 1u and an encoder instead of 1.75? i've been thinking about it but it depends how much id have to end up re routing/my laziness in general vs how much i want it.
pretty sure 2 1us is impossible but ill see about the encoder depending on how much work it is.Yes, correct, or even 2 1Us as a 1.75U alternative.Interested, any plans for an alternate layout option to the default backspace layout?
Sent from my iPhone using Tapatalk
are you asking about 1u and an encoder instead of 1.75? i've been thinking about it but it depends how much id have to end up re routing/my laziness in general vs how much i want it.
Sent from my iPhone using Tapatalk
Understood & I’m still interested!!!pretty sure 2 1us is impossible but ill see about the encoder depending on how much work it is.Yes, correct, or even 2 1Us as a 1.75U alternative.Interested, any plans for an alternate layout option to the default backspace layout?
Sent from my iPhone using Tapatalk
are you asking about 1u and an encoder instead of 1.75? i've been thinking about it but it depends how much id have to end up re routing/my laziness in general vs how much i want it.
Sent from my iPhone using Tapatalk
Currently with Campsite in the horizon I have no plans to do an Aluminum case but I do certainly want to support it once plate files are available as this board is what will end up going there for sure.
Currently with Campsite in the horizon I have no plans to do an Aluminum case but I do certainly want to support it once plate files are available as this board is what will end up going there for sure.
Pardon me, but does this mean the Campsite plates won't be compatible with the GetawayVan? I assumed they would be, since both ICs are based on the same old Van PCB.
bump to say that we got 69 responses
-GB extras(plates and such) pricing are still up in the air and im a bit wishy washy about how i want to handle shipping costs
-I still need to figure out shipping material usage+actual shipping cost and where to add it(maybe just do flat 10 for na and 20 eu but if you have any suggestions feel free to drop them here but i do need to figure out the eu pricing for sure since thats a bit more randomish)
-GB extras(plates and such) pricing are still up in the air and im a bit wishy washy about how i want to handle shipping costs
An option I'm willing to do: pay for the pcb and the plate, willing to wait for both to be shipped together. Not sure if that will help with costs though?-I still need to figure out shipping material usage+actual shipping cost and where to add it(maybe just do flat 10 for na and 20 eu but if you have any suggestions feel free to drop them here but i do need to figure out the eu pricing for sure since thats a bit more randomish)
nervously laughs in Asian
-GB extras(plates and such) pricing are still up in the air and im a bit wishy washy about how i want to handle shipping costs
An option I'm willing to do: pay for the pcb and the plate, willing to wait for both to be shipped together. Not sure if that will help with costs though?-I still need to figure out shipping material usage+actual shipping cost and where to add it(maybe just do flat 10 for na and 20 eu but if you have any suggestions feel free to drop them here but i do need to figure out the eu pricing for sure since thats a bit more randomish)
nervously laughs in Asian
Didn't think that I would see Uzaki-Chan on anything keeb related but here we are.Only in the proto Pcbs since it seemed fitting, final silks is gonna be posted in a tad since a lot of progress has popped up
<anxiously awaits news about PCB's>Same here!
<anxiously awaits news about PCB's>
<anxiously awaits news about PCB's>
tldr need to get the pcb rewired for the 303 family as 072s are gone, dont have the time for it but should be easy enough(couple extra components that i have the space for) and the soft launch date of the 15th is gone. The jlc pcbs came out great but i have yet to make a working board because getting the mcu placement is hard apparently. Will do the fixes and open up a small run for those in the discord because im tired of hand soldering and put even more money into protos sucks so may as well fund it that way since all that is missing then is usb and leds which i have enough of.
tldr of tldr stuff is out of stock and i need to rework 2 of my projects to order assembled protos since im sick of handsoldering, but for that i need time so slower progress there and ill probably do that once i dont have a ton of school stuff due next week
heres plates+new silk imagesShow Image(https://cdn.discordapp.com/attachments/695310997086273606/781275247335833690/IMG_20201125_134410.jpg)
this is just pcbs with both sides being shownShow Image(https://media.discordapp.net/attachments/746117506556625046/781271527785234492/20201125_133355.jpg)
and 7u plate filled outShow Image(https://media.discordapp.net/attachments/746117506556625046/781281862231523328/IMG_20201125_140930.jpg)
the yellow came out sick so im probably gonna see if i can get some of those built in the order of 100 for gb but for now I need to have the time to work on kicad stuff, the time to test the handsoldered protos while not messing the rest of my limited supplies(f042s) and the time that a finals student needs so this very definitely is taking a back burner so if not dec 15th ill try and aim for a new years gb at the latest as soon as i can confirm the new protos work.
<anxiously awaits news about PCB's>
tldr need to get the pcb rewired for the 303 family as 072s are gone, dont have the time for it but should be easy enough(couple extra components that i have the space for) and the soft launch date of the 15th is gone. The jlc pcbs came out great but i have yet to make a working board because getting the mcu placement is hard apparently. Will do the fixes and open up a small run for those in the discord because im tired of hand soldering and put even more money into protos sucks so may as well fund it that way since all that is missing then is usb and leds which i have enough of.
tldr of tldr stuff is out of stock and i need to rework 2 of my projects to order assembled protos since im sick of handsoldering, but for that i need time so slower progress there and ill probably do that once i dont have a ton of school stuff due next week
heres plates+new silk imagesShow Image(https://cdn.discordapp.com/attachments/695310997086273606/781275247335833690/IMG_20201125_134410.jpg)
this is just pcbs with both sides being shownShow Image(https://media.discordapp.net/attachments/746117506556625046/781271527785234492/20201125_133355.jpg)
and 7u plate filled outShow Image(https://media.discordapp.net/attachments/746117506556625046/781281862231523328/IMG_20201125_140930.jpg)
the yellow came out sick so im probably gonna see if i can get some of those built in the order of 100 for gb but for now I need to have the time to work on kicad stuff, the time to test the handsoldered protos while not messing the rest of my limited supplies(f042s) and the time that a finals student needs so this very definitely is taking a back burner so if not dec 15th ill try and aim for a new years gb at the latest as soon as i can confirm the new protos work.
Righteous.
Get that school work done and I'll see you in discord.
That yellow is sick.
That yellow came out sick indeed!
Question about the 3D-printed cases, will yours come out the same as the one in the P3d Store? And if one were to buy from the P3d Store, will your plates fit their boards? I assume this is them btw: https://p3dstore.com/products/minivan-3dp-keyboard-case-2
also, just saw the discord link and it's expired :(
Will the FR4 plates work with the original plastic Minivan case and is there any chance we can buy just the plate?
Just for clarity for those who don’t use discord (aka me 2 months ago) - the default pcb/fr4 plate will work with the P3D tray mount case, correct? Thanks btw for giving buyers have a few 3D-print options as well as working with WB to make campsite an option :thumb:
[/quote
I'd get on that asap since Jake told me he is going to be retiring the option soon but yes that case uses the pcb mounting points so the default plate lets you access those screws to use them.