[GB] TGR-Jane v2 (QC, Shipping) 100% shipped

[stxfreak]

Don’t worry, you’ll probably find a spot for 2k

[Mcnos]

Any updates on the blue gray? The anticipation is killing meh.

What samples where???

Show Image

I'm surprised I missed the update when I did. It looks  nice, but yeah more gray tone would make it  :thumb:
To add to this, Yuktsi also said more gray would be great and that he'd ask them to try again next week.

[kuchann]

Hi, is this the best location to look for updates on the GB? Seems some have access to information (eg. blue color sample pic) that wasn't originally posted on this thread. Checking because I know color selection window is closing at end of this month and I haven't seen any communication from Yuktsi regarding the blue color sample.

Thanks!

[Mcnos]

Hi, is this the best location to look for updates on the GB? Seems some have access to information (eg. blue color sample pic) that wasn't originally posted on this thread. Checking because I know color selection window is closing at end of this month and I haven't seen any communication from Yuktsi regarding the blue color sample.

Thanks!

Yeah updates come here, not sure how the sample was posted, maybe it was a discord server but generally updates are here.

[LightningXI]

I would personally wait for an official update to be posted here on the thread.

Sent from my mobile using Tapatalk

[Puddsy]

I would personally wait for an official update to be posted here on the thread.

Sent from my mobile using Tapatalk

Generally the best move. Sometimes yuktsi will post little things in discord or slack, but the most important stuff always ends up here.

[bdkrzy]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

[Mcnos]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

[LightningXI]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

No TGR design has been the exact same.

Sent from my mobile using Tapatalk

[superdoedoe]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

[Puddsy]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

hahahahaha

[bmilcs]

We're coming up here to the last days of the month.

I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.

But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?

[phatty]

Hey bmilcs, How'd you work out that you were number 40?

I want to know what number I was!

[The_judge_168]

Hey bmilcs, How'd you work out that you were number 40?

I want to know what number I was!

Invoice had numbers on them so I would assume from that

[yuktsi]

We're coming up here to the last days of the month.

I'm sure we'll have a continued chance to change color options until the Gray Blue blocks are presented.

But just to make sure, @yuktsi will you extend the color choice deadline until we can see those options?

Since we still have sometime before the anodizing, I am still working on the blue-gray. Another batch of samples should be ready next week.

You will still have about a week to decide on the color once the blue-gray is confirmed. Thanks.

[LightningXI]

Thanks for the update!

Sent from my mobile using Tapatalk

[superdoedoe]

Yeah cheers for the update.

[romevi]

was

[stolenweapon]

excited to see blue gray

[stxfreak]

Hey bmilcs, How'd you work out that you were number 40?

I want to know what number I was!

Invoice had numbers on them so I would assume from that

probably just because he entered at 41 seconds, as my invoice number was 41 and I entered with 35 seconds. either he asked yuktsi or he doesnt know there were multiple with 41s

[bmilcs]

Hey bmilcs, How'd you work out that you were number 40?

I want to know what number I was!

Invoice had numbers on them so I would assume from that

probably just because he entered at 41 seconds, as my invoice number was 41 and I entered with 35 seconds. either he asked yuktsi or he doesnt know there were multiple with 41s

Bingo. I am ::41 seconds::, and going to gamble on me being last place. I've never been so thrilled being in last place.

Edit: Invoice states #31. I highly doubt at the 41 second cut off, I beat 9 other people by a fraction of a second.

[bthezebra]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

[stxfreak]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

IT will probably still not be the same design, something like a CE or s

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

afaik yuktsi never did the same run again, always some minor differences i.e. for the 910 wedge vs handles

[bthezebra]

Any idea on when the next round could be? 2019 Q2, Q3?

gooby pls

Hopefully 2019 Q1

Will TGR Jane be available on Typemachina later on? I'm quite confused.

Yeah, TM will have their own version of Jane based on the R1/CE. Coming soon I think.

That's awesome, but V2 all the way.

Question here though. The half plate add-on, is it 1.5mm or any other thickness?

Hey, it is 1.5mm

Here is the comment

[stxfreak]

I know he wrote that, just based my comment on past gbs of him. We will just have to wait and see 

[bthezebra]

I know he wrote that, just based my comment on past gbs of him. We will just have to wait and see 

Thats cool that you were aware but I posted this for bdkrzy to not be confused by the conflicting messages of people who don't know

[amnesia0287]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

[Mcnos]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

Oof CE

[bthezebra]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

Oof CE

Oof indeed if that's the case, hopefully I don't fat finger the next form.

[Mcnos]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

Oof CE

Oof indeed if that's the case, hopefully I don't fat finger the next form.

GL if I'm in the next buy as well muahaha

[phatty]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

Oof CE

Oof indeed if that's the case, hopefully I don't fat finger the next form.

GL if I'm in the next buy as well muahaha

Oh, CE version? Put me down on that list too. 41 seconds was way too long. I expected to miss out, so I put in a message in my form while I was filling it out.

Sounds like you're going to be competing for that too!

[amnesia0287]

Decided to stay out of R1 and wait for R2 with more customization. Can't wait for feedback from other users from R1

R1?

I don't think this exact board will be ran a second time.

If it is, it won't be for years.

I could have sworn earlier in this thread Yutski confirmed based on this going smoothly that there would be a second run in Q1 2019.

It won’t be the same. It would be like Jane V2 CE or something.

Oof CE

Oof indeed if that's the case, hopefully I don't fat finger the next form.

GL if I'm in the next buy as well muahaha

Oh, CE version? Put me down on that list too. 41 seconds was way too long. I expected to miss out, so I put in a message in my form while I was filling it out.

Sounds like you're going to be competing for that too!

I have no clue if the CE would be the same as the 910 (foot to wedge) or if it would be totally different changes. I just asked if the next round would be CE and he said yes.

This is the extent of my knowledge:

[P1kas]

Any updates on the final design for the weight engravings?

[Mcnos]

Any updates on the final design for the weight engravings?

I'm also curious about this and the blue sample as well.

[P1kas]

He posted this on Discord a few days ago

[Mcnos]

Show Image

He posted this on Discord a few days ago

Is this the most recent one? It looks perfect to me.

Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.

[P1kas]

Yes, that picture/sample is more recent than the first one that was posted here.

[Mcnos]

Yes, that picture/sample is more recent than the first one that was posted here.

I think I would be 100% okay with that color. Although several photos may be necessary to see the shade more clearly

[P1kas]

I'm sure Yuktsi himself will be posting here with more information eventually. He did seem pleased with how the second sample turned out, but it's best to wait for word from him

[romevi]

Show Image

He posted this on Discord a few days ago

Is this the most recent one? It looks perfect to me.

Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.

Oh, man. That picture is one of my top three favorite keyboard pictures ever.

[phatty]

How does one confirm and also finalise their colour choice?

[bmilcs]

Show Image

He posted this on Discord a few days ago

Is this the most recent one? It looks perfect to me.

Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.

Oh, man. That picture is one of my top three favorite keyboard pictures ever.

PREACH. Mechblog <3

[Mcnos]

Show Image

He posted this on Discord a few days ago

Is this the most recent one? It looks perfect to me.

Just for reference, here's a bad mock up I did. The colors are incorrect for comparison as the shading really takes affect.

Oh, man. That picture is one of my top three favorite keyboard pictures ever.

Absolute beauty right?

The Deskmay from Novelkeys reminds me of it, I need to pick it up soon.

[yuktsi]

Update!!!

Hi all, hope you guys are doing well. We are approximately 3 weeks into production. The blue/blue-grey is still in the testing at the moment. Photos that I shared on discord earlier were not final. Another sample is expected early next week.

All parts other than PCBs are in the making. PCBs are expected to be finalized over this weekend. Production and assembly will take around 2 weeks.

Hopefully, the boards will start to ship around this time next month. Fingers crossed 

[yuktsi]

Hold on, getting the screenshot of the back engravings.

[yuktsi]

There you go

[SBN]

There you go

Show Image

I like the TGR and v2 engraving in the corners with the Jane one on the weight! Looks good!

[LightningXI]

There you go

Show Image

Gorgeous! Can't wait for this board. Thank you so much for the updates.

Sent from my mobile using Tapatalk

[mmontess]

Hype is nearing critical levels. Cannot wait!

[Mcnos]

Did you just say next month? Whaaaa