lol Will the next one be called No. 2?
That looks really good.
I like the design of the diffuser - that looks like it's going to do a great job getting the RGB LED's on the bottom of the PCB to evenly illuminate the edges. What PCB did you choose?
That looks really good.
I like the design of the diffuser - that looks like it's going to do a great job getting the RGB LED's on the bottom of the PCB to evenly illuminate the edges. What PCB did you choose?
It's not a diffuser. Thats a solid piece of metal
I am a full supporter of this if the weight/part two of the bottom case is brass.
I am a full supporter of this if the weight/part two of the bottom case is brass.
The prototype uses chrome-plated brass. I don't think the chrome plating should be used any more other than this prototype because it led to a few issues with the prototype that wouldn't have occurred with a simpler finish.
I am a full supporter of this if the weight/part two of the bottom case is brass.
The prototype uses chrome-plated brass. I don't think the chrome plating should be used any more other than this prototype because it led to a few issues with the prototype that wouldn't have occurred with a simpler finish.
ill dispose of this prototype for you
if the prototype sucks then that means there's lots to learn on how to make the final product even better :thumb:
Very nice! What CAD program did you end up choosing to make this, and did you design this from the ground up, or did you base it off of yuktsi's TKL?
Looks cool. The mounting is interesting. Any idea what colors you'll run it in?
Oh, I forgot about the most important part:
Can we get some in-the-dark pics for the underglow? I wanna see what it looks like.
Oh, I forgot about the most important part:
Can we get some in-the-dark pics for the underglow? I wanna see what it looks like.
There is no underglow. That spacer is metal.
Aluminum plate built with Hirose MX switchesShow Image(http://i.imgur.com/vUO8WLH.jpg?1)Show Image(http://i.imgur.com/2UOuMxo.jpg?1)
Aluminum plate built with Hirose MX switchesShow Image(http://i.imgur.com/vUO8WLH.jpg?1)Show Image(http://i.imgur.com/2UOuMxo.jpg?1)
wait is that what the dark blue looks like irl?
Aluminum plate built with Hirose MX switchesShow Image(http://i.imgur.com/vUO8WLH.jpg?1)Show Image(http://i.imgur.com/2UOuMxo.jpg?1)
wait is that what the dark blue looks like irl?
No, the dark blue is much darker. This plate is a prototype blue that won't be offered (and the case is a prototype blue gray that also wasn't offered).
that looks so good, great work man. any shots of the whole board?
that looks so good, great work man. any shots of the whole board?Show Image(http://i.imgur.com/zTpfBw7.jpg?1)
Sorry for the delay. =)
that looks so good, great work man. any shots of the whole board?Show Image(http://i.imgur.com/zTpfBw7.jpg?1)
Sorry for the delay. =)
how about whole back side?
that looks so good, great work man. any shots of the whole board?Show Image(http://i.imgur.com/zTpfBw7.jpg?1)
Sorry for the delay. =)
that looks so good, great work man. any shots of the whole board?Show Image(http://i.imgur.com/zTpfBw7.jpg?1)
Sorry for the delay. =)
how about whole back side?
Please, full frontal wasn't enough? :rolleyes:
Yeah I mean, would you lay your hands on something of which you've only seen the front? :)
Production sample.Show Image(http://i.imgur.com/P6xCtNi.jpg?1)
Production sample.(http://i.imgur.com/hAqjsir.gif)Show Image(http://i.imgur.com/P6xCtNi.jpg?1)
I'm impatiently waiting on the day I can buy my own ;)
Might be a bit, and it's unlikely that it'll be a traditional GB. More boards will become available, but after all the difficulty that's been seen in recent group buys, I don't fancy being in that position myself. Something will happen, just don't go selling everything right yet.
Show Image(http://i.imgur.com/JDhDQYH.jpg)
Full size (http://i.imgur.com/xbzoibf.jpg)
Show Image(http://i.imgur.com/JDhDQYH.jpg)
Full size (http://i.imgur.com/xbzoibf.jpg)
Show Image(http://i.imgur.com/JDhDQYH.jpg)
Full size (http://i.imgur.com/xbzoibf.jpg)
I need new pants
The hype is unreal! Those color combos look phenomenal :eek:
The hype is unreal! Those color combos look phenomenal :eek:
The top left dark blue w/ magenta insert combined with the GMK Laser cap set....*sploosh*
Mine is here next week sometime, can't wait. What a fantastic and enjoyable group buy experience so far. I will definitily update with pictures when I get mine.
Quick lunch break unpacking, can't wait to start the build. Very impressive quality!amazing. and wow that weight looks massiveShow Image(http://i.imgur.com/mWPnhI2.jpg)Show Image(http://i.imgur.com/vqr8cjl.jpg)
Quick lunch break unpacking, can't wait to start the build. Very impressive quality!Show Image(http://i.imgur.com/mWPnhI2.jpg)Show Image(http://i.imgur.com/vqr8cjl.jpg)
Can you show us a closeup of that seam on the edge where the metals meet?
Can you show us a closeup of that seam on the edge where the metals meet?
Where the mid layer/weight peeks out of the bottom? It's uneven in that photo because of the uneven table and mat :)
Can you show us a closeup of that seam on the edge where the metals meet?
Where the mid layer/weight peeks out of the bottom? It's uneven in that photo because of the uneven table and mat :)
I meant the seams where the mid layer meets the bottom and top, the sandwich. I wanna see how sharp of a seam it makes. The bottom looks incredible. It makes me want to buy the board based on that alone.
Mine arrived today as well: http://imgur.com/a/EGNdP (http://imgur.com/a/EGNdP) I didn't see the request for the picture beforehand, sorry!
I went for a miami nights theme, to go with the keyset that is in production with gmk. Pink plate, teal midlayer, black case. It is a beautiful board and riot ran this groupbuy superbly. Can't wait to build this thing soon.
Love the pics of these, beautiful design and great color palette, can't wait to find out more. Really like the 'no. 1' moniker, hope that stays through the next production run and isn't exclusive to these limited few.
Finally got a chance to take some pics after building the board this past weekend. The board's been at work for 3 days now, and I've absolutely no complaints.
The gasket mounting works wonderfully -- the plate sits nice and tight and makes assembly/disassembly very straightforward. It's a much easier system than the 356 Mini's rubber o-ring (https://deskthority.net/photos-f62/356mini-t5185.html#p99729) wrapped around the PCB+plate assembly. The plates are immaculate, I'm really enjoying the brass so far. I built it with 72g Silent MX Blacks but I think I may switch them out for 65g Vintage MX Blacks for a more raw feel of the brass plate. It's got a great soft touch.
The plate's "wings" that rest on the bottom half of the case are quite large, which gives the plate a large platform to rest on. There are 6 large rubber gaskets that match up with the wings along the front and rear edges of the case. These firmly press the large wings onto the bottom half of the case. The tight fitment of the rubber gaskets on those large mounts seems to add a substantial amount of dampening, but it may be more the brass plate itself given that I don't have any experience with other brass plates -- brass is far denser than aluminum and softer than steel which would explain things. It's a sort of hybrid between a top-mounted plate with no support in the center of the board and tray-mounted rigidity on the edges where the plate is pressed onto the bottom half of the case. I would welcome the opportunity to compare an aluminum plate to the brass one, but for my second plate I opted for a partial polycarbonate which I don't think will offer a fair comparison (though I'm quite excited for the juxtaposition of PCB-mounted switches to the heft of the case).
I'm really surprised at the heft of the board. It's incredibly solid, the board even with an all-aluminum construction feels nearly as heavy as my F107. I'm glad I went with the aluminum mid-layer, I think brass would have been too much for me to lug to work and back, though it surely would have looked extremely nice :))
My only critique is that the seam on the left-hand side of the mid-layer/weight is about 0.5mm off (sticks out) but aside from that everything is totally flush, it doesn't bother me in the slightest.
The board is a bit higher in the front than other boards I'm used to, as well as a slightly steeper angle (9.5deg if I recall correctly) but it matches the overall styling of the board extremely well. The board looks elegant from afar, but up close it has great no-nonsense desk presence. The top profile of the board isn't flashy in all of the ways I was looking for. No logos, lights, diffusers. Just a nice, flat block of finely anodized aluminum.
Did I mention the navy color is fantastic?
All in all a phenomenal board, riot you should be very happy with what you've created. My hat's off to your design and manufacturer. It was a truly well run buy.
(https://farm5.staticflickr.com/4336/36929313715_b65e992682_z.jpg) (https://flic.kr/p/Ygjonr)
Not sure how I missed this but I am very sad.It was not public until the GB had pretty much ended!
Beautiful work Riot! Would love to see a GB for it someday :)
Problem with this board is that I'd never get to use it because it would always be flipped upside down so I could admire it's sexy backside. :p
GJ Riot! VERY COOL :thumb: :thumb: :thumb:
Finish: no flaws, looks gorgeous
Design: creative, and just as i like it, with no diffuser, but rather a large middle piece in metal
Group buy experience: best you can probably get, shipped super fast and great email updates
I have done trades with riotonthebay, and now a group buy, he keeps on doing the impossible and would recommend his keyboard stuff to anyone looking for high quality and accomplished work.
10/10
These are amazing!
Not sure how I missed this but I am very sad.
I'M BACK *****ES
with a tactical and strategic potato picShow Image(http://i.imgur.com/gzhp1XR.jpg)
I'M BACK *****ES
with a tactical and strategic potato picShow Image(http://i.imgur.com/gzhp1XR.jpg)
Very appropriate colours for sifo ;)
I'M BACK *****ES
with a tactical and strategic potato picShow Image(http://i.imgur.com/gzhp1XR.jpg)
looks like a watermelon which is kinda dope
did anyone get a white one or is it silver with lighting making it look white? If so pls contact me.
Taking the time to write up a review after using the board as a daily driver for over a week, anyway lets get into it.
The packaging by Riot had quite a few nice touches with the stamp and personalized note card. I could tell there was thought put into the presentation of the packaging which is usually just over looked and thrown away once the board opened.
Anodization quality is top notch and the colors matched the color chips exactly (although I did pick simple colors). The machined parts fit together perfectly with very little wiggle room.
The option for a poly carbonate partial plate is one I wish every group buy offered. The pcb mount alphas have no harsh bottom out feedback and the sound created from the non metalic material is a deeper thock than a normal alu or SS plate.
The gasket mounting was a bit of a struggle to get right (should have read the instructions), but the compression created with the plate and top and middle lets the plate sit very firmly in the case.
Thoughts are bit all over the place, but if you have any questions on my personal opinion of the board feel free contact me. Still learning how to take pictures then eventually edit, but here are my best shots.Show Image(https://i.imgur.com/rHk6oXY.jpg)Show Image(https://i.imgur.com/SXNjaaZ.jpg)Show Image(https://i.imgur.com/Ibdv9aO.jpg)Show Image(https://i.imgur.com/g2Zkta6.jpg)Show Image(https://i.imgur.com/3qAA3HD.jpg)
Taking the time to write up a review after using the board as a daily driver for over a week, anyway lets get into it.
The packaging by Riot had quite a few nice touches with the stamp and personalized note card. I could tell there was thought put into the presentation of the packaging which is usually just over looked and thrown away once the board opened.
Anodization quality is top notch and the colors matched the color chips exactly (although I did pick simple colors). The machined parts fit together perfectly with very little wiggle room.
The option for a poly carbonate partial plate is one I wish every group buy offered. The pcb mount alphas have no harsh bottom out feedback and the sound created from the non metalic material is a deeper thock than a normal alu or SS plate.
The gasket mounting was a bit of a struggle to get right (should have read the instructions), but the compression created with the plate and top and middle lets the plate sit very firmly in the case.
Thoughts are bit all over the place, but if you have any questions on my personal opinion of the board feel free contact me. Still learning how to take pictures then eventually edit, but here are my best shots.Show Image(https://i.imgur.com/rHk6oXY.jpg)Show Image(https://i.imgur.com/SXNjaaZ.jpg)Show Image(https://i.imgur.com/Ibdv9aO.jpg)Show Image(https://i.imgur.com/g2Zkta6.jpg)Show Image(https://i.imgur.com/3qAA3HD.jpg)
did anyone get a white one or is it silver with lighting making it look white? If so pls contact me.
did anyone get a white one or is it silver with lighting making it look white? If so pls contact me.
Yeah it's silver. I'll try to get photos of my board soon.
did anyone get a white one or is it silver with lighting making it look white? If so pls contact me.
Yeah it's silver. I'll try to get photos of my board soon.
YEAH HURRY UP ALREADY. GOD. :))
Took some pictures while building Sent's board :thumb: Full build log here. (http://imgur.com/a/yV6sr)Show Image(http://i.imgur.com/YF6oLh6.jpg)Show Image(https://i.imgur.com/EhWKIcu.gif)Show Image(http://i.imgur.com/o9slubb.jpg)
Took some pictures while building Sent's board :thumb: Full build log here. (http://imgur.com/a/yV6sr)Show Image(http://i.imgur.com/YF6oLh6.jpg)Show Image(https://i.imgur.com/EhWKIcu.gif)Show Image(http://i.imgur.com/o9slubb.jpg)
Took some pictures while building Sent's board :thumb: Full build log here. (http://imgur.com/a/yV6sr)Show Image(http://i.imgur.com/YF6oLh6.jpg)Show Image(https://i.imgur.com/EhWKIcu.gif)Show Image(http://i.imgur.com/o9slubb.jpg)
So I've been wanting to do a typing test for the No.1 because it sounds so amazing, but I've been too lazy. Until now!
I was doing a typing video for someone looking to buy one of my boards and thought to record everything on the shelf.
LZ-FE
There are three design decisions I'd like to mention. The first is that the "weight" isn't so much of a weight as it is half of a two-part case bottom — the weight design visible on the underside of the case is the same piece of material that forms the strip that runs around the side and back of the case. The second is that the plate is sandwich-mounted between the two-part bottom and the case top. Sandwich-style cases have, in my experience, provided the best typing experience and sound compared to bottom or top-mounted plates. Third, adhesive rubber gaskets have been incorporated into grooves in the case top to ensure that the plate is sandwiched perfectly with no wiggle room.Show Image(http://i.imgur.com/nWwWUPy.png)Show Image(http://i.imgur.com/jGU9WQF.png)
There are three design decisions I'd like to mention. The first is that the "weight" isn't so much of a weight as it is half of a two-part case bottom — the weight design visible on the underside of the case is the same piece of material that forms the strip that runs around the side and back of the case. The second is that the plate is sandwich-mounted between the two-part bottom and the case top. Sandwich-style cases have, in my experience, provided the best typing experience and sound compared to bottom or top-mounted plates. Third, adhesive rubber gaskets have been incorporated into grooves in the case top to ensure that the plate is sandwiched perfectly with no wiggle room.Show Image(http://i.imgur.com/nWwWUPy.png)Show Image(http://i.imgur.com/jGU9WQF.png)
The midplate/weight design is awesome! If there could a a chance that this keyboard support alps pcb/plate or it can work with some existing Alps PCB like one from LFK keyboard would be awesome!
LZ-FE
Woo the LZFE with alps brown, never know that lz board can go with alps switch besides the specific lz alps I guess.
tx87 supports ALPS IIRC
Leeku has a L3 Alphas PCB and LZ offers a Alps plate if you ask
If the L3 Alphas PCB has the same footprint as the TX87, then I don't see why it wouldn't work. If there's an open/available DFX for a Alps-compatible TKL plate out there, that'd also be a big help and make it a lot more likely that I could make it happen. Realistically I'd just make a drawing for a Keycult No.1-compatible Alps plate available and then let folks run a mini-GB to make it happen.
BTW laughatpain, thanks a bunch for the video comparisons! I'm glad you like the sound as much as I do ;D
If the L3 Alphas PCB has the same footprint as the TX87, then I don't see why it wouldn't work. If there's an open/available DFX for a Alps-compatible TKL plate out there, that'd also be a big help and make it a lot more likely that I could make it happen. Realistically I'd just make a drawing for a Keycult No.1-compatible Alps plate available and then let folks run a mini-GB to make it happen.
BTW laughatpain, thanks a bunch for the video comparisons! I'm glad you like the sound as much as I do ;D
The L3 Alphas PCB "should" be the same foot print. I know a few people have designed Alps plates for "jane style" plate mounting if you are interested in asking around. L3 Alphas PCBs would come from Leeku himself and I'm not sure of his stock numbers after a few orders during the LZ-CLS gb.
If the L3 Alphas PCB has the same footprint as the TX87, then I don't see why it wouldn't work. If there's an open/available DFX for a Alps-compatible TKL plate out there, that'd also be a big help and make it a lot more likely that I could make it happen. Realistically I'd just make a drawing for a Keycult No.1-compatible Alps plate available and then let folks run a mini-GB to make it happen.
Built mine today, it is a lovely board. I will have more opinions on the typing characteristics of the board after I have used it a little more. The final keyset will be Miami Nights which is still being run by Originative.Show Image(https://i.imgur.com/BwZrszH.jpg)Show Image(https://i.imgur.com/4xi3dxY.jpg)Show Image(https://i.imgur.com/wgqAukM.jpg)
Built mine today, it is a lovely board. I will have more opinions on the typing characteristics of the board after I have used it a little more. The final keyset will be Miami Nights which is still being run by Originative.
No more top case dent, custom cyan anodizing, corrected gasket slots and one sexy potatoShow Image(https://i.imgur.com/DFfG18t.jpg)
Will build it once Miami GMK ships to me. Ordered some MOD switches to go with it. Too lazy to mod my own switches now, it gets really dull after you've done like 2000 of them.
sorry for yellow lighting
great.I like this "weight" design,is heavy?
No more top case dent, custom cyan anodizing, corrected gasket slots and one sexy potatoShow Image(https://i.imgur.com/DFfG18t.jpg)
Will build it once Miami GMK ships to me. Ordered some MOD switches to go with it. Too lazy to mod my own switches now, it gets really dull after you've done like 2000 of them.
sorry for yellow lighting
The one on the left looks pretty green. Interesting color difference.
No more top case dent, custom cyan anodizing, corrected gasket slots and one sexy potatoShow Image(https://i.imgur.com/DFfG18t.jpg)
Will build it once Miami GMK ships to me. Ordered some MOD switches to go with it. Too lazy to mod my own switches now, it gets really dull after you've done like 2000 of them.
sorry for yellow lighting
The one on the left looks pretty green. Interesting color difference.
I haven't seen the replacement cyan in person, and it was meant to be less green than the one from the GB, but the picture is making the case on the left look straight green, which it isn't. It's more of a turquoise in person.
can we choose a 'brass weight'?
Do we stay tuned for a GB or...? Looks lovely and coincidentally I need a TKL for work... Who cares about rent :P
Do we stay tuned for a GB or...? Looks lovely and coincidentally I need a TKL for work... Who cares about rent :P
No official date but they're coming soon :-X
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Can you make one for my Jane?
Just for me.
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
American Customs > Korean Customs ;D
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
hot
Preview of a small side project:Show Image(https://i.imgur.com/CmQm5wM.jpg)
When do i get my wrist rest. Thanks :thumb:
Miami nights Keycult No. 1 + WR (https://imgur.com/a/ZxOeT)Show Image(https://i.imgur.com/QBWjet5.jpg)
A couple updates on the wrist rest.
It's especially obvious from this picture (https://i.imgur.com/1J4ZnYl.jpg) that the polycarbonate looks kind of splotchy. I believe that was exacerbated by the sandblasting, which left super fine particulate on it that soaked up oils and gave it that splotchy look. My friend had a great suggestion, which was to rub an oil over the entire polycarbonate surface to give it essentially a uniform coating. So I wiped it down with a damp rag to get rid of as much particulate as possible, and then applied a super, super thin layer of a synthetic oil. It looks amazing now -- super uniform look and barely any noticeable splotches from my palms resting on it. It also felt sort of chalky before (I think due to the fine particulate on the surface), and it doesn't feel that way now (it feels much better imo). I'll likely treat all of the polycarbonate parts this way before sending them out if/when a GB happens.
For folks asking about getting one, I'm going to hold off for a month+ for a couple of reasons. First, I want to wait long enough that folks can get one who ordered a No. 1 in the second round, and the timing on that is still a bit up in the air. Second, I want to see how the finish holds up to consistent use. The polycarbonate is sandblasted, and I expect my palms will polish it over time, which might not be a good look. I want more time to evaluate how fast that happens and explore alternatives if needed.
Is this second round something people can get in on? Or are the spots already filled.
Is this second round something people can get in on? Or are the spots already filled.
Nope, no spots have been filled. If you follow this thread, you'll know when there's more info to share.
monkaS
FeelsLifeMan
Finished mine - Miami Nights and 55g silent blacksShow Image(https://i.imgur.com/T5YIxW9.jpg)
Finished mine - Miami Nights and 55g silent blacksShow Image(https://i.imgur.com/T5YIxW9.jpg)
Finished mine - Miami Nights and 55g silent blacksShow Image(https://i.imgur.com/T5YIxW9.jpg)
is that navy blue or is that just an effect from the key caps / I'm colorblind?
is that navy blue or is that just an effect from the key caps / I'm colorblind?
Byker's is black, if that's what you're referring to.
Any update on these?
Any update on these?
Various delays not in our control have slowed things down (holidays, long shipping delays on some Pantone chips, etc). I can't give a firm timeline at this point but will update this thread when I know more.
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticf
lickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
I can barely see the keyboard through all "the dust"! :) Dude, that keyboard is off the hook I don't know what you're talking about. :)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
I can barely see the keyboard through all "the dust"! :) Dude, that keyboard is off the hook I don't know what you're talking about. :)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
Finally got around to taking some photos of mine fully assembled. Obligatory ignore dust etc, no matter how much I datavac I can never seem to get it all.Show Image(https://farm5.staticflickr.com/4518/25093511618_4f5bbe0b79_h.jpg)Show Image(https://farm5.staticflickr.com/4541/25093512098_b7f7c3d2a3_h.jpg)Show Image(https://farm5.staticflickr.com/4550/38964708871_bb2fc72cb1_h.jpg)
Kick-ass combo :cool:Show Image(https://vignette.wikia.nocookie.net/kick-ass/images/f/fb/Kick-ass-2-new-trailer-and-poster-focuses-on-hit-girl.jpg/revision/latest/top-crop/width/240/height/240?cb=20130328192014)
check the latest oco update
apparently this is close
check the latest oco update
apparently this is close
Is Originative going to be the official vendor or are they reselling kits that they bought, kinda like with Norbauer cases in the past?
check the latest oco update
apparently this is close
Is Originative going to be the official vendor or are they reselling kits that they bought, kinda like with Norbauer cases in the past?
check the latest oco update
apparently this is close
check the latest oco update
apparently this is close
Could you give a link? My googlefu isnt finding anything thanks.
check the latest oco update
apparently this is close
Could you give a link? My googlefu isnt finding anything thanks.
http://www.kbdist.com/updates/
My body is ready.
Wait, is this going to be a traditional GB, or is OCo stocking already-made cases for immediate sale? I expected the former, but now I wonder what it means when they say they have the majority of the parts already.
Wait, is this going to be a traditional GB, or is OCo stocking already-made cases for immediate sale? I expected the former, but now I wonder what it means when they say they have the majority of the parts already.
Wait, is this going to be a traditional GB, or is OCo stocking already-made cases for immediate sale? I expected the former, but now I wonder what it means when they say they have the majority of the parts already.
It really looks like it'll be already-made, given the information from this thread and the VE.A thread.
Wait, is this going to be a traditional GB, or is OCo stocking already-made cases for immediate sale? I expected the former, but now I wonder what it means when they say they have the majority of the parts already.
It really looks like it'll be already-made, given the information from this thread and the VE.A thread.
Wait, is this going to be a traditional GB, or is OCo stocking already-made cases for immediate sale? I expected the former, but now I wonder what it means when they say they have the majority of the parts already.
It really looks like it'll be already-made, given the information from this thread and the VE.A thread.
Will this be dropped before the VE.A?
Any ideas when this is going to drop?
There has been someone spreading false rumor. We aren't launching TypeMachina just yet, and we haven't received any No. 1 parts as of this point.
The No. 1 is still undergoing anodization (hard ano), and it will undergo quality control very soon. We are eager to get these out, but they aren't quite ready yet.
We have received some pieces now, but the site is still being finished.
We'll be getting the No.1 this week :) We already have all the accessories for it.
hard ano
OoohhhQuotehard ano
Type 3?
OoohhhQuotehard ano
Type 3?
yes
I still want this keyboard.
I still want this keyboard.
gotta wait on hyperfuse v17 to finish up, right? kidding kidding... don't get mad, bunny
Just teasing about a 3rd GMK version of HF coming out. I'm confused how they aren't connected. New HF going to be a GB that was announced on KBDIST by bunnylake. KBDIST is not related to OcO? I guess I misunderstood
I'm totally going to buy a No. 1
Just not sure on the color yet.
Shot in the dark, but do you have any extras available? I would love a shot at owning one of these.
Still on the hunt for a custom TKL build.
Shot in the dark, but do you have any extras available? I would love a shot at owning one of these.
Still on the hunt for a custom TKL build.
no more of the original run. But if you read the past 2 pages a new run is coming through oco very soon.
Shot in the dark, but do you have any extras available? I would love a shot at owning one of these.
Still on the hunt for a custom TKL build.
no more of the original run. But if you read the past 2 pages a new run is coming through oco very soon.
What's oco? I just skimmed through the OP and thought I'd throw out a question. Took a sick day with major headaches and not the sharpest at the moment.
Also, what's the predicted cost w/ shipping?
Any updates on the cost?
Any updates on the cost?
Only updates you'll find are on kbdist.com/updates
have some hypeShow Image(https://i.imgur.com/iSN5T19.jpg)
day 1 upate: guys this is a really ****ing nice keyboard holy ****, jumped up to #2 favourite keyboard I own real fast (#1 obviously being lz-s)
i'm working night shifts this week so i ain't seeing the sun any time soon but maybe one day i'll have a decent pic up
QFT I need to take some pics of mine with the polycarb half plate, really excellent and I'm excited for more people to grt in.
Any new eta for the sale? Little news morsels?
QFT I need to take some pics of mine with the polycarb half plate, really excellent and I'm excited for more people to grt in.
Yes, pls do :)
FWIW https://geekhack.org/index.php?topic=35864.msg2579412#msg2579412
This board is worth the wait.
QFT I need to take some pics of mine with the polycarb half plate, really excellent and I'm excited for more people to grt in.
Yes, pls do :)
FWIW https://geekhack.org/index.php?topic=35864.msg2579412#msg2579412
This board is worth the wait.
Any new eta for the sale? Little news morsels?
https://www.typemachina.com
Any new eta for the sale? Little news morsels?
https://www.typemachina.com
Thanks, I signed up but I'm wondering if anyone knows anything more than the latest update on kbdist, which was Feb 9th - "Products shipping.One last quality check".
Here's a crappy phone pic of mine. Dark blue case, cyan middle / weight, and pink plate. Keyset is gateron / epbt black on black and the esc is a clack octopink 420.Show Image(https://i.imgur.com/8VwKROv.jpg)
(Attachment Link)u forgot to add the TM to that....
Here's a crappy phone pic of mine. Dark blue case, cyan middle / weight, and pink plate. Keyset is gateron / epbt black on black and the esc is a clack octopink 420.Show Image(https://i.imgur.com/8VwKROv.jpg)
That moment where I regret that I didn't buy one of the spares.
So is this going to forever come out on Next FridayTM or can we expect an update soon?I hear that it's coming out in Smarch.
So is this going to forever come out on Next FridayTM or can we expect an update soon?
Can't understand why so many people are complaining... It'll come out eventually, It's not like any of you have paid anything or are owed anything.
So is this going to forever come out on Next FridayTM or can we expect an update soon?
I heard from someone not so reliable that they're only waiting on boxes... no one knows though :rolleyes:Can't understand why so many people are complaining... It'll come out eventually, It's not like any of you have paid anything or are owed anything.
Who's complaining?
So is this going to forever come out on Next FridayTM or can we expect an update soon?
Show Image(https://farm2.staticflickr.com/1755/42757820511_45917bea60_k.jpg)
Quick pic of mine, will try and post more sometime soon.
Built with lubed Box Blacks and OG Cherry dyesubs. It's my first custom TKL and I couldn't be happier :eek:
Show Image(https://farm2.staticflickr.com/1755/42757820511_45917bea60_k.jpg)
Quick pic of mine, will try and post more sometime soon.
Built with lubed Box Blacks and OG Cherry dyesubs. It's my first custom TKL and I couldn't be happier :eek:
One of yours :pShow Image(https://farm2.staticflickr.com/1755/42757820511_45917bea60_k.jpg)
Quick pic of mine, will try and post more sometime soon.
Built with lubed Box Blacks and OG Cherry dyesubs. It's my first custom TKL and I couldn't be happier :eek:
nice build! what's the esc?
One of yours :pShow Image(https://farm2.staticflickr.com/1755/42757820511_45917bea60_k.jpg)
Quick pic of mine, will try and post more sometime soon.
Built with lubed Box Blacks and OG Cherry dyesubs. It's my first custom TKL and I couldn't be happier :eek:
nice build! what's the esc?
Show Image(https://farm2.staticflickr.com/1755/42757820511_45917bea60_k.jpg)
Quick pic of mine, will try and post more sometime soon.
Built with lubed Box Blacks and OG Cherry dyesubs. It's my first custom TKL and I couldn't be happier :eek:
It makes me feel warm and fuzzy that folks remain interested in this board, and I'm eager to see this second run come out too, but at this point we're waiting on things that I neither control nor oversee. I'll post here if I see a firm timeline, but I don't know when or if that will come and until that point, prompting for updates in this thread isn't going to yield anything.
A lot went into this run and I promise that this isn't just vaporware. We're all just going to have to exercise some patience. :thumb:
https://no2.keycult.io/(https://cdn.shopify.com/s/files/1/1061/1924/products/Eyes_Emoji_large.png?v=1480481045)
https://no2.keycult.io/$600+?
https://no2.keycult.io/
$600+?
https://no2.keycult.io/$600+?
Sent from my Pixel 2 XL using Tapatalk
So, this is a Limited Edition. But will there be a full round of No.2 for us normies?
Wait so is the No.1 on TM still happening?Wait so TM is still happening?
SoonTM (get it)Wait so is the No.1 on TM still happening?Wait so TM is still happening?
Sent from my Pixel 2 using Tapatalk
Wait so is the No.1 on TM still happening?
Wait so TM is still happening?
What degree angle is the case?
Will there be another round for sale or is that it for the No1? I wanted to get a grey or black wkl :(
Sent from my Pixel XL using Tapatalk
Will there be another round for sale or is that it for the No1? I wanted to get a grey or black wkl :(
Sent from my Pixel XL using Tapatalk
Loads more, this is only small percentage
Show Image(https://i.imgur.com/uUDRpnM.png)
i normally wouldn't get brass, but since it was the same price as alu i got it cause i know it costs more to make and i want to get the most for my money
im excited, think im gonna use my desko set
I'm assuming these will pop up in a newsletter at some point and sell out quickly.
I'm assuming these will pop up in a newsletter at some point and sell out quickly.
Called it, snagged the Blackout / Gunmetal Grey / Winkeyless.
Show Image(https://i.imgur.com/uUDRpnM.png)
i normally wouldn't get brass, but since it was the same price as alu i got it cause i know it costs more to make and i want to get the most for my money
im excited, think im gonna use my desko set
that green will look great with the brass, nice pick
Unfortunately this was announced, launched and sold out during the night (UK time).
I’m hopeful that I can pick one up next go round.
I'm assuming these will pop up in a newsletter at some point and sell out quickly.
Called it, snagged the Blackout / Gunmetal Grey / Winkeyless.
niceShow Image(https://i.imgur.com/uUDRpnM.png)
i normally wouldn't get brass, but since it was the same price as alu i got it cause i know it costs more to make and i want to get the most for my money
im excited, think im gonna use my desko set
that green will look great with the brass, nice pick
yeah i was kinda annoyed cause i was gonna get green/black until i saw the brass was the same price
but i think i'll come around to it
worst case im sure someone would be willing to trade
Anyone know what PCB firmware the No.1 PCB uses?
Damn I missed it :(. Can anyone tell me a price though?
Anyone know what PCB firmware the No.1 PCB uses?
Should be a Leeku pcb that uses Jigon https://geekhack.org/index.php?topic=83950.0 (https://geekhack.org/index.php?topic=83950.0)
I'm assuming these will pop up in a newsletter at some point and sell out quickly.
Called it, snagged the Blackout / Gunmetal Grey / Winkeyless.
niceShow Image(https://i.imgur.com/uUDRpnM.png)
i normally wouldn't get brass, but since it was the same price as alu i got it cause i know it costs more to make and i want to get the most for my money
im excited, think im gonna use my desko set
that green will look great with the brass, nice pick
yeah i was kinda annoyed cause i was gonna get green/black until i saw the brass was the same price
but i think i'll come around to it
worst case im sure someone would be willing to trade
If you want Maroon red, I'd happily take brass. I'm in on this last buy too and wanted brass, but it was gone too fast.
https://no2.keycult.io/
Is No 2 a TKL as well?
Since there will be only 10 kits available, will only No 1 owner can buy No 2?
Any word on when these are going to be available again?
Any word on when these are going to be available again?
Sorry, I don't know anything except that more will be available eventually. TM has more stock that I expect will be available once they have packaging and have soft-launched the other boards that will be available.
sherry ship me my keyboard challenge
Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
rotb why'd you have to make such a good board
****ed up how things take time
Worst-best keyboard you ever made. Harrumph.Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
rotb why'd you have to make such a good board
****ed up how things take time
Would it help if I told you it's the worst board I've ever made?
Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
rotb why'd you have to make such a good board
****ed up how things take time
Would it help if I told you it's the worst board I've ever made?
Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
rotb why'd you have to make such a good board
****ed up how things take time
Would it help if I told you it's the worst board I've ever made?
Restock keyboard challenge :(sherry ship me my keyboard challenge
Sent from my Pixel XL using Tapatalk
rotb why'd you have to make such a good board
****ed up how things take time
Would it help if I told you it's the worst board I've ever made?
I'm going to believe you until Sherry actually ships it.
sell me your keyboard challenge
sell me your keyboard challenge
Just buy his Dolphin v2
I had a look through this thread but couldn't find any dimensions. Does someone have them? (looking for a hardshell case (or maybe I'll go with RomeoTran's leather case), unless someone has recommendations for one already?)
well yeah, but I was hoping more specific.I had a look through this thread but couldn't find any dimensions. Does someone have them? (looking for a hardshell case (or maybe I'll go with RomeoTran's leather case), unless someone has recommendations for one already?)
14x7x3 is like standard for tkls, so get something in that vein
i got a big case for this and my other boards that don't have cases
well yeah, but I was hoping more specific.I had a look through this thread but couldn't find any dimensions. Does someone have them? (looking for a hardshell case (or maybe I'll go with RomeoTran's leather case), unless someone has recommendations for one already?)
14x7x3 is like standard for tkls, so get something in that vein
i got a big case for this and my other boards that don't have cases
or I'll just get a bigger outer case and cut foam padding to spec when I have it. I kinda want it padded snuggly, not just a random husk...
PS: also; liar! Your mira has a case ;) (I basically want something like the cases for Eve or TX boards but with fitting inner padding.)
;)well yeah, but I was hoping more specific.I had a look through this thread but couldn't find any dimensions. Does someone have them? (looking for a hardshell case (or maybe I'll go with RomeoTran's leather case), unless someone has recommendations for one already?)
14x7x3 is like standard for tkls, so get something in that vein
i got a big case for this and my other boards that don't have cases
or I'll just get a bigger outer case and cut foam padding to spec when I have it. I kinda want it padded snuggly, not just a random husk...
PS: also; liar! Your mira has a case ;) (I basically want something like the cases for Eve or TX boards but with fitting inner padding.)
my mira and nothing else :<
Oh, been wondering, will there be an opportunity to grab that nice matching wrist rest again too? :)
yay :)Oh, been wondering, will there be an opportunity to grab that nice matching wrist rest again too? :)
;)
I hope Typemachina gets more of this in soon. Really want this board. :(
I've officially given up on compact layouts. I'm a TKL user... through and through.
After the failure to join Jane, I even has less hope now for No.2 since there are only 10 kits :'(there'll be an official GB on typemachina for the No1, at some point this year (I guess), or soon TM
After the failure to join Jane, I even has less hope now for No.2 since there are only 10 kits :'(there'll be an official GB on typemachina for the No1, at some point this year (I guess), or soon TM
Ah, fcfs thenAfter the failure to join Jane, I even has less hope now for No.2 since there are only 10 kits :'(there'll be an official GB on typemachina for the No1, at some point this year (I guess), or soon TM
Not a group buy afaik. They'll already have the boards produced and will be selling what they stock
Ah, fcfs thenAfter the failure to join Jane, I even has less hope now for No.2 since there are only 10 kits :'(there'll be an official GB on typemachina for the No1, at some point this year (I guess), or soon TM
Not a group buy afaik. They'll already have the boards produced and will be selling what they stock
Sent from my DREA100 using Tapatalk
Yeah, I know, I was just saying that he's also got another chance for a No1 since he said he missed itAh, fcfs thenAfter the failure to join Jane, I even has less hope now for No.2 since there are only 10 kits :'(there'll be an official GB on typemachina for the No1, at some point this year (I guess), or soon TM
Not a group buy afaik. They'll already have the boards produced and will be selling what they stock
Sent from my DREA100 using Tapatalk
Just for clarity, Solotov was referencing the No. 2, of which there will apparently be only 10 kits. (Not to take away from the discussion of the No. 1)
Got my No.1 last night and did a wash on it to find out I was not too impressed on the anode job done. The top and bottom piece have quite a number of visible marks from fingerprints and color mismatch spots.Show Image(https://i.imgur.com/MlnXETq.jpg)
Bottom piece spots:Show Image(https://i.imgur.com/AinJZyz.jpg)Show Image(https://i.imgur.com/eDGNxUx.jpg)Show Image(https://i.imgur.com/XL1AQzJ.jpg)
Top piece is not so much better either :(Show Image(https://i.imgur.com/exSELWE.jpg)Show Image(https://i.imgur.com/gW5ymKf.jpg)Show Image(https://i.imgur.com/K6Ta9Yj.jpg)
I don't know how these would pass QC and to wait a long time for this finish kinda left me disappointed in the end. The middle insert and plate in purple have great anode which makes me think they did these separately :-X
Hope that TM would have replacement parts for these since I don't feel like building this at all. More pictures of spots on the inside can be found here (I don't want to flood the post with pics and the marks on the inner piece would not be visible once built but still)
https://imgur.com/a/nNBOC2Q
...but for the foreseeable future Keycult will be operating independently.
This has been such a disappointment, all this time we were waiting on packaging, did no one do any QC on these boards?
This has been such a disappointment, all this time we were waiting on packaging, did no one do any QC on these boards?
Let's not confuse the Typemachina disappointment with Keycult.
So, this means that the creators/designers of the boards just only passed the design to TM. The sole responsibility of manufacturing & QC is all on TM.
Guess this might happen to other projects from them as well (U-80 and so on). Then, I think I'll pass their future projects and wait for Keycult No.2 then.
So, this means that the creators/designers of the boards just only passed the design to TM. The sole responsibility of manufacturing & QC is all on TM.
Guess this might happen to other projects from them as well (U-80 and so on). Then, I think I'll pass their future projects and wait for Keycult No.2 then.
In all defense the packaging was not entirely custom.
is anyone else still waiting for shipping
i asked sherry to put some stabs in my package and i swear to god if that's what's holding it up
is anyone else still waiting for shipping
i asked sherry to put some stabs in my package and i swear to god if that's what's holding it up
Given the issues with the boards that have already arrived, I'd assume they've paused shipping to figure out what's going on and to (hopefully) make sure they're not shipping out more poor quality boards.
is anyone else still waiting for shippingYep, also still waiting. Paid for an upgrade some time ago, since then I didn‘t hear anything anymore either.
i asked sherry to put some stabs in my package and i swear to god if that's what's holding it up
is anyone else still waiting for shipping
i asked sherry to put some stabs in my package and i swear to god if that's what's holding it up
Given the issues with the boards that have already arrived, I'd assume they've paused shipping to figure out what's going on and to (hopefully) make sure they're not shipping out more poor quality boards.
got shipping todayYep, same here.
got shipping today
behold my sonShow Image(https://lh3.googleusercontent.com/jetAg0kMnoqIXp8GUd5MEMyrfHSOm06Opfj9HD-PE8w7hbkMDct_XaQS00ODi5ft9FTLSm5aNFlK5H1hJwze7jqjrrYCGDG9_f3U9TzoYs3mSjwLyX7iBXvD8BSPPXpYL5jyqhl_ijwrxNKJg14Pe3qE6eaNWkg957fExZnm1x2_XeRiABqKhfGJDKhnpBHsVN0om5LVnW9veosgohCt4Ba1heDumZ_oULkYDSgVokKSVmVYcs0ykh_FowXjXn6t4UvSv4ZFtSgA7Ednm1sVZ9R5gilEfwJdEPNaR7GULvxlRnH75w6tDe1-yveUaqvxaN0i_3j11RqANFFt7u7cDA9EQMWoa91NBNbVm7zB1dQ9zxIoOy9TeqqremplyKIMowr2j8DKFfyVn-U6AIMde-xGaF2SxkeBM0eKAWkp1IhIfRpBTLuF6iH9Fmwa9au8zR_Ame1itzsE12N9_6quYPEp2A4gjCaNzjO4eMCbbMmseV3O8AzETzTNk4Tq69Gk6LZ_8HyiFoA970vIkOHC5C37gDLY6G_q1lHLsuOpOAjZPq7Ei7E-s3LAxOn02w6WHvrQ7u1zCrRtPZM7i60RyKQUtorKHurSXK7wtxX8YH-cpyfybXWZ-QZOP3JzF37hSW5NfeGsM5jAPskGKtLIqMJR=w1732-h974-no)
behold my son
cant
behold my son
cantShow Image(https://i.imgur.com/6ZvnaCH.jpg)
behold my sonShow Image(https://lh3.googleusercontent.com/jetAg0kMnoqIXp8GUd5MEMyrfHSOm06Opfj9HD-PE8w7hbkMDct_XaQS00ODi5ft9FTLSm5aNFlK5H1hJwze7jqjrrYCGDG9_f3U9TzoYs3mSjwLyX7iBXvD8BSPPXpYL5jyqhl_ijwrxNKJg14Pe3qE6eaNWkg957fExZnm1x2_XeRiABqKhfGJDKhnpBHsVN0om5LVnW9veosgohCt4Ba1heDumZ_oULkYDSgVokKSVmVYcs0ykh_FowXjXn6t4UvSv4ZFtSgA7Ednm1sVZ9R5gilEfwJdEPNaR7GULvxlRnH75w6tDe1-yveUaqvxaN0i_3j11RqANFFt7u7cDA9EQMWoa91NBNbVm7zB1dQ9zxIoOy9TeqqremplyKIMowr2j8DKFfyVn-U6AIMde-xGaF2SxkeBM0eKAWkp1IhIfRpBTLuF6iH9Fmwa9au8zR_Ame1itzsE12N9_6quYPEp2A4gjCaNzjO4eMCbbMmseV3O8AzETzTNk4Tq69Gk6LZ_8HyiFoA970vIkOHC5C37gDLY6G_q1lHLsuOpOAjZPq7Ei7E-s3LAxOn02w6WHvrQ7u1zCrRtPZM7i60RyKQUtorKHurSXK7wtxX8YH-cpyfybXWZ-QZOP3JzF37hSW5NfeGsM5jAPskGKtLIqMJR=w1732-h974-no)
behold my son
cantShow Image(https://i.imgur.com/6ZvnaCH.jpg)
ISO
hey romeviISOShow Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)MoreShow Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)
hey romeviISOShow Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)MoreShow Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)Show Image(https://i.imgur.com/b9zJeoc.gif)MoreShow Image(https://i.imgur.com/wKJZEf4.png)
Anyone do a polycarb plate that fits these yet?
I'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
Will they fit a Jane v1?
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
Will they fit a Jane v1?
no
I'll talk to riot about whether or not he's cool with me doing a run and then throw an IC up
So, what on earth has happened to TypeMachina?? Been waiting for Keycult No.1 for a while.
So, what on earth has happened to TypeMachina?? Been waiting for Keycult No.1 for a while.
Keycult had a small release through TM a while back now. There were issues though that are still being rectified so I think the next release is on hold
So, what on earth has happened to TypeMachina?? Been waiting for Keycult No.1 for a while.
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).Is it still planned on being a limited GB?
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).
Something else may be available before it...
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).
Is it still planned on being a limited GB?
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).
Is it still planned on being a limited GB?
Yes, and I think the reasoning for that will be more obvious when more info is released. I know it's frustrating to be kept in the dark -- I hope that it won't be more than a few months at this point. Please carry on with your normal keyboard purchases and evaluate this when it comes.
Can our Christmas present be more info? :p
Can our Christmas present be more info? :p
bruh your gb updates are major cheeks tho
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).
Something else may be available before it...
Can our Christmas present be more info? :p
bruh your gb updates are major cheeks tho
Lmfao
Obvious update is obvious: No. 2 isn't going to happen in 2018. However, it's definitely going to happen and is currently planned within first half of 2019 (after Chinese New Year).
Something else may be available before it...
Have you decided whether FCFS or raffle?
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
Will they fit a Jane v1?
no
I'll talk to riot about whether or not he's cool with me doing a run and then throw an IC up
there already are pc halfplates for this, so if there are gonna be any further, I'm in tooI'd be interested in a half plate if you're doing polycarb...Anyone do a polycarb plate that fits these yet?
I have the plate file and was considering it. If you can find me somewhere to get them cut, I'm happy to get 4-5 made for basically cost.
Riot did tell me that I can't use the file for a full GB, so it would really just be like 5 plates at cost +shipping.
Will they fit a Jane v1?
no
I'll talk to riot about whether or not he's cool with me doing a run and then throw an IC up
I'm about to do a rebuild and still looking for a polycarb plate. ;)
keycult.io (https://keycult.io/)
Something's coming soon…
These 60's and 65's are amazing. will they have multiple layouts or is the plate set?
I see a reg BS on the 60 but a split on the 65.
I really like the look of the 65, especially the brass one! With only 5 available, though, are they going to be FCFS or a raffle format?
Any chance we can get photos of how the board is set up considering it has a daughter board as well?
Really happy to see the 60 and 65 though
Is it really that hard to set an alarm for a few minutes before and try to buy one, even if 20 people do that you still got better odds than a bunch of people entering a raffle.
Is it really that hard to set an alarm for a few minutes before and try to buy one, even if 20 people do that you still got better odds than a bunch of people entering a raffle.
Is it really that hard to set an alarm for a few minutes before and try to buy one, even if 20 people do that you still got better odds than a bunch of people entering a raffle.
* FCFS for this first release. If there's way more demand than supply, we can definitely consider an alternative arrangement for future releases, but it seemed kind of like putting the cart before the horse to assume we'd need a raffle for our first sale like this.
* Quantities: Fifteen 1/60 Aluminum Edition, Five 1/60 Brass Edition, Fifteen 1/65 Aluminum Edition, Five 1/65 Brass Edition. For now, this is what we could afford. If all of these sell out quickly, that'll definitely be taken into consideration in the future when we'll hopefully have more flexibility on numbers.
* Everything will be sold through keycult.io, which is a Shopify site. It shouldn't crack under the pressure, but we'll see…
Alu weights on alu version and Brass weights on brass versions?
Are the times correct on the site? The brass are dropping later than the alu ones? Just want to be sure, the boards look exceptionally nice from the pics so far, will defo be trying to get a brass one. Can you reveal info on what colours and how many of each colour will be available? And price?
Is it the PCB that we see as orange on the 65? Will it be orange for real?