Author Topic: If someone guesses what this cable is for...  (Read 87242 times)

0 Members and 1 Guest are viewing this topic.

Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
If someone guesses what this cable is for...
« on: Mon, 05 May 2014, 20:08:39 »
They get a free cable of their choice.  Any sleeving, any ends, on me.

I'll give all non former D-Squadders a week starting now - http://www.timeanddate.com/countdown/generic?iso=20140512T0810&p0=875&msg=Cable+guess&csz=1&swk=1

That took less time than I anticipated.  Bueller got it right and will get a cool cable out of it

More
IMG_1856.jpg by tjcaustin, on Flickr

Here's the finished work -
IMG_1859.jpg by tjcaustin, on Flickr
« Last Edit: Tue, 06 May 2014, 13:51:03 by tjcaustin »

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2943
  • Location: Carolina Beach, NC
Re: If someone guesses what this cable is for...
« Reply #1 on: Mon, 05 May 2014, 20:10:02 »
Can I get a bigger picture so I can see it? :P

Filco cable?

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: If someone guesses what this cable is for...
« Reply #2 on: Mon, 05 May 2014, 20:11:41 »
You finally got the end to go to the QFR daughter board?

Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: If someone guesses what this cable is for...
« Reply #3 on: Mon, 05 May 2014, 20:13:54 »
I've got five, but that's not what this is.  It's a bit of a trick.

When the count down is over, I'll put a picture of what it went in up.

Offline JPG

  • Posts: 1124
  • Location: Canada (Beloeil, near Montreal)
  • Model F is my new passion!
Re: If someone guesses what this cable is for...
« Reply #4 on: Mon, 05 May 2014, 20:16:43 »
I bet it's a cable to power a fan for yourself or soldering maybe?
IBM F122, IBM XT F X2, IBM AT F (all Soarer converted), Filco Camo TKL Browns

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: If someone guesses what this cable is for...
« Reply #5 on: Mon, 05 May 2014, 20:22:47 »
USB to Serial TTL?

Edit:  For something like an Arduino. It looks like it could be your standard Molex 5 pin like a Filco uses, but you said it's a bit of a trick, so...
« Last Edit: Mon, 05 May 2014, 21:22:22 by nubbinator »

Offline smknjoe

  • Posts: 862
  • Location: Tejas
  • I like tactile, clicky, switches.
Re: If someone guesses what this cable is for...
« Reply #6 on: Mon, 05 May 2014, 20:22:56 »
Multi-card reader for desktops/towers.
SSKs for everyone!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: If someone guesses what this cable is for...
« Reply #7 on: Mon, 05 May 2014, 20:47:48 »
Model M cable.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: If someone guesses what this cable is for...
« Reply #8 on: Mon, 05 May 2014, 20:50:20 »
its for plugging into a computer with a usb port :))

Offline smknjoe

  • Posts: 862
  • Location: Tejas
  • I like tactile, clicky, switches.
Re: If someone guesses what this cable is for...
« Reply #9 on: Mon, 05 May 2014, 20:50:54 »
I really looks like power for a floppy drive too.
SSKs for everyone!

Offline smknjoe

  • Posts: 862
  • Location: Tejas
  • I like tactile, clicky, switches.
Re: If someone guesses what this cable is for...
« Reply #10 on: Mon, 05 May 2014, 21:09:49 »
Changed my mind after looking a your "Today's Work" thread. It's for a keyboard that has native USB support, but I don't know which one.
SSKs for everyone!

Offline AKIMbO

  • HHKBro
  • Posts: 1778
  • Location: Tennessee
  • Know Topre, Know Peace. No Topre, No Peace.
Re: If someone guesses what this cable is for...
« Reply #11 on: Mon, 05 May 2014, 21:15:59 »
Looks like a Realforce/Filco cable to me...but that can't be the answer...seems too simple.
Mkawa Beta SSK | IBM SSK | IBM Model AT F | IBM F 122 | IBM Unsaver | LZ-GH (62g ergo clears) | HHKB Pro2 Type-S | HHKB Pro2 | Realforce 87U-Silent (55g uniform) | Leopold FC660C | Omnikey 101 (blue alps) | Kingsaver (blue alps) | Zenith ZKB2 (green alps)
| KBD75 (box reds)

Offline Novus

  • Formerly the1onewolf
  • * Exquisite Elder
  • Posts: 1515
  • Mondai nothing~
Re: If someone guesses what this cable is for...
« Reply #12 on: Mon, 05 May 2014, 21:37:33 »
USB cable with a 4 pin power controller. I'm going to guess it charges a portable amp.

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: If someone guesses what this cable is for...
« Reply #13 on: Mon, 05 May 2014, 21:38:45 »
USB cable with a 4 pin power controller. I'm going to guess it charges a portable amp.

I was thinking it could be for some Arduino based amp, but didn't know if those existed.

Offline Noko

  • jolonarr: a tough dude who takes no esses!
  • * Maker
  • Posts: 214
  • Location: Canada
    • Noko's Leatherworks
Re: If someone guesses what this cable is for...
« Reply #14 on: Mon, 05 May 2014, 21:41:15 »
A cable for old Mac keyboards? 

Noko's Leatherworks - Handmade Custom Leather Wrist Rests -  http://www.noko.ca

Sales Thread: http://geekhack.org/index.php?topic=51762.0
Build Log: http://geekhack.org/index.php?topic=47704.0

Offline Hak Foo

  • Posts: 1271
  • Make America Clicky Again!
Re: If someone guesses what this cable is for...
« Reply #15 on: Mon, 05 May 2014, 23:24:05 »
Solidtek ASK-6600U?
Overton130, Box Pale Blues.

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: If someone guesses what this cable is for...
« Reply #16 on: Tue, 06 May 2014, 00:49:03 »
Looks like an internal mouse connector to me, seen them in several of the Microsoft Trackballs.
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: If someone guesses what this cable is for...
« Reply #17 on: Tue, 06 May 2014, 06:07:21 »
Is it for a Kensington Slimblade?

Offline Tym

  • [CTRL]ALT
  • * Maker
  • Posts: 1582
  • Location: England
Re: If someone guesses what this cable is for...
« Reply #18 on: Tue, 06 May 2014, 06:18:29 »
A mouse?
unless they have some unforeseeable downside (like they're actually made of cream cheese cunningly disguised as ABS)


Offline smknjoe

  • Posts: 862
  • Location: Tejas
  • I like tactile, clicky, switches.
Re: If someone guesses what this cable is for...
« Reply #19 on: Tue, 06 May 2014, 06:23:06 »
Looks like an internal mouse connector to me

...or that. ;)
SSKs for everyone!

Offline MJ45

  • HHKB Pro
  • Posts: 530
  • Location: Chicagoland
Re: If someone guesses what this cable is for...
« Reply #20 on: Tue, 06 May 2014, 09:31:58 »
The header plug end is not focused enough to identify.

Offline Tym

  • [CTRL]ALT
  • * Maker
  • Posts: 1582
  • Location: England
Re: If someone guesses what this cable is for...
« Reply #21 on: Tue, 06 May 2014, 09:33:48 »
The header plug end is not focused enough to identify.
I think that's intentional.
unless they have some unforeseeable downside (like they're actually made of cream cheese cunningly disguised as ABS)


Offline tjcaustin

  • King Klaxon
  • * Moderator
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: If someone guesses what this cable is for...
« Reply #22 on: Tue, 06 May 2014, 13:16:32 »
Looks like an internal mouse connector to me, seen them in several of the Microsoft Trackballs.

Is it for a Kensington Slimblade?

A mouse?

Looks like an internal mouse connector to me

...or that. ;)

It isn't a slimblade, but it is a mouse.  Looks like bueller got that part right first. PM me with what you want.

Offline Razor Lotus

  • Posts: 351
  • Location: Singapore/United Kingdom
Re: If someone guesses what this cable is for...
« Reply #23 on: Tue, 06 May 2014, 13:36:22 »
congratz on win :)


Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2405
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: If someone guesses what this cable is for...
« Reply #24 on: Tue, 06 May 2014, 20:03:03 »
Congrats bueller! :thumb:

Awesome giveaway contest tjcaustin! :thumb:

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: If someone guesses what this cable is for...
« Reply #25 on: Mon, 26 May 2014, 23:25:06 »
Congratulations bueller - nice one! :)
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ