[GB] TGR-Alice - 100% Completed

[beamingrobot]

What... I thought he finished school already.

Cody mentioned in the Exent thread that he's doing post-grad!

Oh, nice!

Makes sense; dude's got mad talent.

dude is addicted to school man, also thinking of getting a phd afterwards 

If he gets a phd he should change his username to Dr. Yuktsi

Not if he's still driving the way he is, he should change his username to Yuktsi's ambulance

[beamingrobot]

Alice poly wrist rest proto is here.



Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

[blacksimon]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

fixed link:

https://imgur.com/a/ci0ahfn

[Kafka]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

Is it possible to add holes for the bump ons to go in? Seems like bump ons would make the rest taller than the board.

[Puddsy]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

Is it possible to add holes for the bump ons to go in? Seems like bump ons would make the rest taller than the board.

this pls

my mira doesn't line up right with some stuff cause of this

thank

[beamingrobot]

Much easier/cheaper to machine a whole block like that especially for poly, but I can ask.

[I_need_a_bath]

The wrist rest looks great. Kind of regret not ordering one now

[dantambok]

Would look so cool if the engraving was infilled with red paint/ink! Damn can't wait for these beauties! 

[poolside]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

This looks great. The wrist rest now needs a matching polycarbonate Alice  ;)

Will the final version have chamfered edges (probably too expensive)?

Is the logo placement locked? The Alice engraving would also look good on the left side, under the small blocker of the keyboard:

[dimo]

The wrist rest looks great. Kind of regret not ordering one now

I feel like I put an order in but I don't remember if I submitted it. Guess I'll have to wait for the invoice

[Puddsy]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

This looks great. The wrist rest now needs a matching polycarbonate Alice  ;)

Will the final version have chamfered edges (probably too expensive)?

Is the logo placement locked? The Alice engraving would also look good on the left side, under the small blocker of the keyboard:

Show Image

or on the right, under the tgr logo

[captainish]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

Wrist rest looks great. Worst case, if it doesn't line up, I'll carve out depressions for the bumpons.

[amnesia0287]

Alice poly wrist rest proto is here.

Show Image

Album

Full polycarbonate, some machine dust that I've not wiped off yet but seems good so far. I will also order rubber feet for the wrist rest so that will add a little bit of height to the piece.

If you've submitted through the Gform hang tight, gonna see how many there are and ask for fresh quotes from the manu and then invoice. I'll probably do Shopify invoices through my store and then the usual wait etc which you're all familiar with.

I'm curious how it feels. I'm totally getting it cause it looks nice, but my one concern with blasted PC for a wristrest is how it actually feels to use it since blasted PC kinda feels dry and almost abrasive to me if that makes sense. I guess it will probably wear in after use anyway.

[Jhors2]

Putting the logo in the middle makes sense for a few reasons, one is due to the ergo layout your hands will never be resting ontop of it so you can see it.  Two, you will never get a bunch of gunk from your hands into the engravings which can be painful to clean.

[amnesia0287]

Putting the logo in the middle makes sense for a few reasons, one is due to the ergo layout your hands will never be resting ontop of it so you can see it.  Two, you will never get a bunch of gunk from your hands into the engravings which can be painful to clean.

I don't care about the engraving at all, I'm referring to the texture of the PC itself. Frosted PC has a dry feel to it, I don't really know how to explain it any better tho. I'm just curious what it might feel like in use.

[dimo]

Putting the logo in the middle makes sense for a few reasons, one is due to the ergo layout your hands will never be resting ontop of it so you can see it.  Two, you will never get a bunch of gunk from your hands into the engravings which can be painful to clean.

I don't care about the engraving at all, I'm referring to the texture of the PC itself. Frosted PC has a dry feel to it, I don't really know how to explain it any better tho. I'm just curious what it might feel like in use.

He wasn't replying to you. He was replying to the multiple people above you that were talking about the placement of the logo.

[beamingrobot]

Would look so cool if the engraving was infilled with red paint/ink! Damn can't wait for these beauties! 

Pretty sure you can infill it yourself with any colour of your choosing later on

The wrist rest looks great. Kind of regret not ordering one now

We still have time! The Gform I posted some pages back is still valid, no one has been invoiced since I'm gonna send an updated file with depressed space for the bumpons.

This looks great. The wrist rest now needs a matching polycarbonate Alice 

Will the final version have chamfered edges (probably too expensive)?

Is the logo placement locked? The Alice engraving would also look good on the left side, under the small blocker of the keyboard:

Show Image

Yea not chamfered. I'm open to changing up the position of the logo, but I thought having it in the middle is nice.

[amnesia0287]

Putting the logo in the middle makes sense for a few reasons, one is due to the ergo layout your hands will never be resting ontop of it so you can see it.  Two, you will never get a bunch of gunk from your hands into the engravings which can be painful to clean.

I don't care about the engraving at all, I'm referring to the texture of the PC itself. Frosted PC has a dry feel to it, I don't really know how to explain it any better tho. I'm just curious what it might feel like in use.

He wasn't replying to you. He was replying to the multiple people above you that were talking about the placement of the logo.

Ahh, gotcha. Looking at the image with the text in the left, I prefer it only because it maintains the asymmetry of the tgr logo on the right.

That said, I don’t mind it in the middle and it won’t risk wear as much as the side (maybe?).  Either way, it looks very nice @beamingrobot.

[Puddsy]

Hearing that shipping invoices are going out? Anyone got one?

[superdoedoe]

Hearing that shipping invoices are going out? Anyone got one?

Wut...It's way too early for Alice to be shipping - come back in a few months

[Puddsy]

Hearing that shipping invoices are going out? Anyone got one?

Wut...It's way too early for Alice to be shipping - come back in a few months

I've had two different people tell me they just got them, but I've been punk'd before.

[Puddsy]

it was poly 910, not alice

back to waiting

[superdoedoe]

Hearing that shipping invoices are going out? Anyone got one?

Wut...It's way too early for Alice to be shipping - come back in a few months

I've had two different people tell me they just got them, but I've been punk'd before.

Are you sure it's not for Another of his Boards? like PC910?

[Puddsy]

Hearing that shipping invoices are going out? Anyone got one?

Wut...It's way too early for Alice to be shipping - come back in a few months

I've had two different people tell me they just got them, but I've been punk'd before.

Are you sure it's not for Another of his Boards? like PC910?

it was poly 910, not alice

back to waiting

nobody looks at invoices anymore in the current year

[yuktsi]

The file that I shared is merely a template. The maker is supposed to add the necessary features to make it usable. 

[kconfire]

The pc wrist rest looks so good, and I'm def in for them! (At least 2 lol)
How's our Alice going Yuktsi? Just wanted to say you can take as much time as you want if that means we will see the nice anode and fit like your proto as shown at the top of the thread.  

[yuktsi]

The pc wrist rest looks so good, and I'm def in for them! (At least 2 lol)
How's our Alice going Yuktsi? Just wanted to say you can take as much time as you want if that means we will see the nice anode and fit like your proto as shown at the top of the thread.  

The anodization is faster than expected. They might be able to finish them next week.

More

[theillumedpanda]

The pc wrist rest looks so good, and I'm def in for them! (At least 2 lol)
How's our Alice going Yuktsi? Just wanted to say you can take as much time as you want if that means we will see the nice anode and fit like your proto as shown at the top of the thread.  

The anodization is faster than expected. They might be able to finish them next week.

More

Show Image

Looks good! Are you happy with the ano sample? I‘m looking forward to mine! And the PC 910 also...

[Puddsy]

The pc wrist rest looks so good, and I'm def in for them! (At least 2 lol)
How's our Alice going Yuktsi? Just wanted to say you can take as much time as you want if that means we will see the nice anode and fit like your proto as shown at the top of the thread.  

The anodization is faster than expected. They might be able to finish them next week.

More

Show Image

:o

[glack23]

The pc wrist rest looks so good, and I'm def in for them! (At least 2 lol)
How's our Alice going Yuktsi? Just wanted to say you can take as much time as you want if that means we will see the nice anode and fit like your proto as shown at the top of the thread.  

The anodization is faster than expected. They might be able to finish them next week.

More

Show Image

. Does that mean shipping soon???

Sent from my Pixel using Tapatalk

[idlemao]

Such a beautiful board. I'm sad I missed out on this. 

[aeryxz]

Hi there,
as noted before I was trying to grab interest for wood rest. This is my first GB so please be gentle
The form is here -> https://docs.google.com/forms/d/e/1FAIpQLSfshEpdEHUYbf4wbxB_b_odaFPfOy-meXNNNqeomomIbQGXvA/viewform?c=0&w=1

I will close it in 2 weeks and start preparing the materials and labour and post out a invoice. If you NA guys want to proxy just hit me up on discord which I check a bit more often. In any case, I hope a few people jump on board!

sample pics: https://imgur.com/a/PotC5Ft

edit: I'm thinking of changing the wrest to be a bit more of a download slant than it is now, but don't want to stray too far from OG design since I can't test with alice. thoughts?

[Joeyo]

I'm in for a wooden wrist rest! 

[yuktsi]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

[Taeha Types]

I WOULD LIKE TO BUY AN EXTRA!!!

[glack23]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

any photos soon?

[shadowrealmwarez]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

Is there a waiting list/google doc form to get onto said waiting list (if exists)?

[yuktsi]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

Is there a waiting list/google doc form to get onto said waiting list (if exists)?

I will post the form once I am done with the QC.

[Captainbuttmonkey]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

Is there a waiting list/google doc form to get onto said waiting list (if exists)?

I will post the form once I am done with the QC.

Oh boy, better get saving

[aeryxz]

I'm in for a wooden wrist rest! 

Thanks for the support. I'm speaking with my carpenter and seeing if I can drop the price 10-20 bucks cheaper - probably more possible if more people jump in.
I myself am thinking about wenge or purple heart, those look so good.

Sent from my Pixel 2 using Tapatalk

[aeryxz]

Week #7 update
The anodization of the top and bottom are finishing. Additional 10 sets per color were made, so extras (or b-stock) will be available. Brass weight and plate are in the making, they are having some issue with the coating. I should expect to hear back from them by Friday. PCBs are still in production, expect another 1-2 weeks.

It's very positive that I will be able to start shipping by the end of June. Fingers crossed.

Looking forward to this

Sent from my Pixel 2 using Tapatalk

[Taeha Types]

is it possible to get wrist rests made for those of us who might (hoping i do) get in the extras sale?

[aeryxz]

is it possible to get wrist rests made for those of us who might (hoping i do) get in the extras sale?

Sure thing. Just pm me when you get your extra

Sent from my Pixel 2 using Tapatalk

[Taeha Types]

Ooof, tyy

[doostin]

Anyone with red/red interested in swapping for silver/silver?

[dimo]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

[futurecrime]

Oh my days this is going fast af.  Nice one Yuktsi. 

[Puddsy]

Anyone with red/red interested in swapping for silver/silver?

that’s a hard swap my dude

not impossible, i'd consider it if i had gone for red

[romeo]

hype for the extras

[kconfire]

Anyone with red/red interested in swapping for silver/silver?

I have red/red.
I may go for silver/silver depending on how it turns out. lol