Author Topic: Cherry Stabilizers + MX blacks PCB (Read 112817 times)

JaccoW · « **Reply #400 on:** Tue, 04 November 2014, 09:31:34 »

Quote from: IvanIvanovich on Tue, 04 November 2014, 09:19:08

Seriously?

Yes.

I can shoot a picture if you want.

IvanIvanovich · « **Reply #401 on:** Tue, 04 November 2014, 09:58:15 »

Oh I believe you. If I have stuff left over I will fix any issues like this.

GeorgeK · « **Reply #402 on:** Tue, 04 November 2014, 11:23:21 »

Quote from: IvanIvanovich on Tue, 04 November 2014, 09:19:08

Seriously?

Yeah - weird right? Weirder still it wasn't one of the screw in types that came with the pcb mount ones but one of the ones with the little expanding clip bit...

JaccoW · « **Reply #403 on:** Tue, 04 November 2014, 11:49:32 »

Quote from: GeorgeK on Tue, 04 November 2014, 11:23:21

Quote from: IvanIvanovich on Tue, 04 November 2014, 09:19:08
Seriously?
Yeah - weird right? Weirder still it wasn't one of the screw in types that came with the pcb mount ones but one of the ones with the little expanding clip bit...

Same here...

Stabilizer Bros!

IvanIvanovich · « **Reply #404 on:** Tue, 04 November 2014, 12:01:29 »

Maybe you guys should trade to get each of a correct type

)

Oobly · « **Reply #405 on:** Fri, 07 November 2014, 08:32:55 »

Yay!

Got my PCB's with Black switches along with my Dolch sets! Awesomesauce!

Karura · « **Reply #406 on:** Sat, 08 November 2014, 05:30:28 »

Still looking for PCB mounted ones, please PM if anyone got extras!

tjweir · « **Reply #407 on:** Sun, 09 November 2014, 17:39:31 »

Doh, I bought PCB mount stabilizers and I need plate mount. Oops.

Did anyone make the opposite mistake I did, and have plate mount rather than PCB mount?

Thanks.

Karura · « **Reply #408 on:** Sun, 09 November 2014, 18:19:39 »

Quote from: tjweir on Sun, 09 November 2014, 17:39:31

Doh, I bought PCB mount stabilizers and I need plate mount. Oops.

Did anyone make the opposite mistake I did, and have plate mount rather than PCB mount?

Thanks.

Yep, what sizes for the spacebar did you get? What a coincidence man...

tjweir · « **Reply #409 on:** Sun, 09 November 2014, 18:31:29 »

5 x 7unit and 8 x 2unit.

Karura · « **Reply #410 on:** Tue, 18 November 2014, 15:04:18 »

Hello everyone,

Just a heads up that I'm still looking for PCB stabs; I have a bunch of Plates (4x 7u, 8x 2u) stabs for trade

To clarify, I'm looking for the ones on the right side (PCB):

PM me if you got some and would like to swap.

TBone · « **Reply #411 on:** Mon, 01 December 2014, 14:11:00 »

Ivan, any update on these? Do you have the corrected ones?

IvanIvanovich · « **Reply #412 on:** Mon, 01 December 2014, 14:58:13 »

Still waiting for GMK to send me.

JBert · « **Reply #413 on:** Tue, 16 December 2014, 06:03:20 »

So, any updates on stabilizers for the GH60?

Synjin · « **Reply #414 on:** Tue, 16 December 2014, 06:53:51 »

Quote from: JBert on Tue, 16 December 2014, 06:03:20

So, any updates on stabilizers for the GH60?

he is still waiting for the corrected wires. Before he can supply the GB

MGH · « **Reply #415 on:** Sat, 03 January 2015, 17:07:04 »

Anybody have a plate 6.25x or plate 7x stabilizer they are willing to sell to me?

SpAmRaY · « **Reply #416 on:** Tue, 13 January 2015, 06:50:59 »

Received my stabs last night, didn't count them or anything but I'm sure they are all there. Thanks again Ivan for running this group buy.

IvanIvanovich · « **Reply #417 on:** Thu, 15 January 2015, 10:14:33 »

So I finally got some update on the wires. Apparently Cherry Europe, who GMK usually deal with are out of these parts and have no plans to make them any time soon. GMK is going to try sourcing from Cherry Asia... it will probably be a while longer. Sorry for the long waiting.

If you want to have the order sent anyway as it is now, just a reminder that is still a choice.

Bromono · « **Reply #418 on:** Thu, 15 January 2015, 10:16:15 »

If anyone received theirs and dont need them. ill pick them up from you. I'll need some for the Red Scarf

digi · « **Reply #419 on:** Thu, 15 January 2015, 17:09:20 »

Quote from: Bromono on Thu, 15 January 2015, 10:16:15

If anyone received theirs and dont need them. ill pick them up from you. I'll need some for the Red Scarf

ditto

Synjin · « **Reply #420 on:** Sat, 17 January 2015, 01:19:36 »

Quote from: IvanIvanovich on Thu, 15 January 2015, 10:14:33

So I finally got some update on the wires. Apparently Cherry Europe, who GMK usually deal with are out of these parts and have no plans to make them any time soon. GMK is going to try sourcing from Cherry Asia... it will probably be a while longer. Sorry for the long waiting.

If you want to have the order sent anyway as it is now, just a reminder that is still a choice.

Not a big deal for me as long as I still get my remaining correct size stabs and my screws <3

trizkut · « **Reply #421 on:** Sat, 17 January 2015, 01:25:43 »

Quote from: IvanIvanovich on Thu, 15 January 2015, 10:14:33

So I finally got some update on the wires. Apparently Cherry Europe, who GMK usually deal with are out of these parts and have no plans to make them any time soon. GMK is going to try sourcing from Cherry Asia... it will probably be a while longer. Sorry for the long waiting.

If you want to have the order sent anyway as it is now, just a reminder that is still a choice.

Cherry just does NOT want to be liked in 2015 it seems...

)

cmadrid · « **Reply #422 on:** Fri, 13 February 2015, 19:46:08 »

Was hoping GMK would get something from Cherry Asia before Chinese New Year

IvanIvanovich · « **Reply #423 on:** Sat, 14 February 2015, 08:42:30 »

Should have them in about 2 weeks.

bueller · « **Reply #424 on:** Sat, 14 February 2015, 08:49:01 »

Looking for some plate mounted stabs if anyone has any they want to sell. Will have some PCB mounted Cherry stabs in the next week or so as well so if you want to swap I'm happy to do that.

IvanIvanovich · « **Reply #425 on:** Sat, 14 February 2015, 08:54:29 »

There may be some leftovers, but I won't be selling them until after all the original orders have been shipped out.

bueller · « **Reply #426 on:** Sat, 14 February 2015, 08:57:14 »

Quote from: IvanIvanovich on Sat, 14 February 2015, 08:54:29

There may be some leftovers, but I won't be selling them until after all the original orders have been shipped out.

Cool cheers for the heads up man, I'll keep an eye on this.

FreeCopy · « **Reply #427 on:** Sat, 14 February 2015, 09:44:13 »

Quote from: IvanIvanovich on Sat, 14 February 2015, 08:42:30

Should have them in about 2 weeks.

How are you working out combining shipping? For instance this and the black on black pbt sets. Is it a matter of how close they get shipped to you or are you shipping out as things are ready?

IvanIvanovich · « **Reply #428 on:** Sat, 14 February 2015, 10:06:14 »

If I can combine things without creating more unnecessary delay I will... otherwise I will just send things out as they are ready to go.

cmadrid · « **Reply #429 on:** Sat, 14 February 2015, 23:58:41 »

Thanks for the update!

Looks like I might have to figure out how to solder soon..

IvanIvanovich · « **Reply #430 on:** Thu, 19 February 2015, 08:04:40 »

New ones on the right, on the way

SpAmRaY · « **Reply #431 on:** Thu, 19 February 2015, 08:14:24 »

#woohoo

#thehypeistoomuch

qwack · « **Reply #432 on:** Thu, 19 February 2015, 08:36:35 »

Heck, now I regret asking you to send my order as it was last week

Have you processed it already or is it sill time to cancel the early shipping with bent wires?

IvanIvanovich · « **Reply #433 on:** Thu, 19 February 2015, 08:39:30 »

Nope, my printer was down last few week so I didn't get anything done. I will just wait for the wires now before shipping out anything else of course.

qwack · « **Reply #434 on:** Thu, 19 February 2015, 11:54:08 »

This is great news, thank you Ivan.

Sifo · « **Reply #435 on:** Sun, 22 February 2015, 19:53:08 »

Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.

byker · « **Reply #436 on:** Sun, 22 February 2015, 19:59:17 »

Quote from: Sifo on Sun, 22 February 2015, 19:53:08

Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.

Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.

Sifo · « **Reply #437 on:** Sun, 22 February 2015, 22:21:08 »

Quote from: byker on Sun, 22 February 2015, 19:59:17

Quote from: Sifo on Sun, 22 February 2015, 19:53:08
Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.

Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.

Ah okay thank you for the headsup.

byker · « **Reply #438 on:** Sun, 22 February 2015, 22:32:08 »

Quote from: Sifo on Sun, 22 February 2015, 22:21:08

Quote from: byker on Sun, 22 February 2015, 19:59:17
Quote from: Sifo on Sun, 22 February 2015, 19:53:08
Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.

Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.

Ah okay thank you for the headsup.

No problem. Long story short, the original spacebar stabs that were sent to Ivan were bent wire, not straight. Then there has been a long wait, but apparently they are on their way in two weeks!

quochung1989 · « **Reply #439 on:** Mon, 23 February 2015, 06:54:09 »

Yes. Hope I 'll receive it soon. Thanks your update, Ivan.

bueller · « **Reply #440 on:** Fri, 27 February 2015, 04:39:47 »

Still looking for some plate mounted stabs if anyone has some they'd like to trade or sell. Spacebar isn't a concern, I have that covered.

cmadrid · « **Reply #441 on:** Fri, 27 February 2015, 09:29:04 »

I can't even remember what I ordered anymore, but if you're still looking when my order gets shipped to me, I might be able to help out

bueller · « **Reply #442 on:** Fri, 27 February 2015, 09:33:18 »

Quote from: cmadrid on Fri, 27 February 2015, 09:29:04

I can't even remember what I ordered anymore, but if you're still looking when my order gets shipped to me, I might be able to help out

Looks like I've got it sorted, thanks

cmadrid · « **Reply #443 on:** Fri, 27 February 2015, 09:33:42 »

Awesome!

Karura · « **Reply #444 on:** Sun, 01 March 2015, 02:34:34 »

Ivan, are there still screw-type PCB stabs available?

Also, if someone has the screw-type PCB stabs, could you sell some to me?

rpeterclark · « **Reply #445 on:** Sun, 01 March 2015, 16:09:26 »

I wish I caught this GB, stabs are so hard to find at a reasonable price. If there are any extras, or if someone overbought, I am very interested in a set and more of possible.

i3oilermaker · « **Reply #446 on:** Sun, 01 March 2015, 23:21:59 »

Quote from: rpeterclark on Sun, 01 March 2015, 16:09:26

I wish I caught this GB, stabs are so hard to find at a reasonable price. If there are any extras, or if someone overbought, I am very interested in a set and more of possible.

Techkeys will have extras

rpeterclark · « **Reply #447 on:** Mon, 02 March 2015, 06:13:06 »

Quote from: i3oilermaker on Sun, 01 March 2015, 23:21:59

Quote from: rpeterclark on Sun, 01 March 2015, 16:09:26
I wish I caught this GB, stabs are so hard to find at a reasonable price. If there are any extras, or if someone overbought, I am very interested in a set and more of possible.

Techkeys will have extras

That's fantastic news! Thanks!

IvanIvanovich · « **Reply #448 on:** Sat, 07 March 2015, 11:52:30 »

I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.

Synjin · « **Reply #449 on:** Sat, 07 March 2015, 11:58:37 »

Quote from: IvanIvanovich on Sat, 07 March 2015, 11:52:30

I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.

Awesome

Hype train starts again. ChooChooo

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: Cherry Stabilizers + MX blacks PCB (Read 112817 times)