Here are my draft notes on what's included in round 1:
Included in each keyboard order:
1 Ultra Compact Style Beam Spring Keyboard with black powdercoated aluminum case and countersunk T8 screws
1 First Aid Kit at no extra cost (4 spare modules, fully assembled)
1 Set of MX plate mount stabilizers
1 foam packaging and box as pictured
2 extra beam springs
1 Flyplate/flipper reattachment tool (a Model F space bar stabilizer wire cut in half!)
1 USB-C cable
1 set of 4 square bumpers/feet
Needed tools: Torx T8 screwdriver
Available to order - the overlays and keys will ship separately:
Black ISO Enter keycap with white text
LED overlay. The LED overlay is recommended (keep dust out) but optional. The beam spring LEDs are close to the top of the case so they can be seen clearly from various angles. Use the LED overlay to identify each LED (standard Num/Caps/Scroll, from left to right). You can use a higher resistor value to make the LEDs dimmer and a lower resistor value to make them brighter. 2.2k is the factory default.
xwhatsit Model F controller - the same exact Model F controller is actually used for this beam spring project
spare custom-made USB-C cables
Additional bumpers. Only adhesive bumpers will work with the round 1 boards as there are no bumper holes on the bottom
Solenoid note - the compact round 1 case will not accommodate the solenoid (not tall enough), so if you order a solenoid you would have to mount it externally or use a smaller solenoid like this one from Sparkfun, which is compatible with the xwhatsit solenoid driver:
https://www.sparkfun.com/products/11015Choice of 2 MX-compatible PBT double shot key sets - refer to the photos to see the included keys:
Choice 1: black modifier keycaps with white text, and the rest of the keys white keycaps with black text
Choice 2: all black keycaps with white text