Will this pcb be compatible with the previous leeks compact sq 1800 case and plate?
QuoteWill this pcb be compatible with the previous leeks compact sq 1800 case and plate?
I would like to know this as well...
correct!QuoteWill this pcb be compatible with the previous leeks compact sq 1800 case and plate?
I would like to know this as well...
It uses the exact same pcb but not the same plate.
In on this for sure, CP1800 layout is where its at. Missed out on LZ-CP & this is sexy. :thumb: :thumb: :thumb:no acrylic this time
Did you guys decide not to do the acrylic bottom?
Also, is this case produced by kin25?
pcb is not presoldered right?Presoldered controller parts, diodes, resistors and rgb leds
Is there a interest check/background thread for this project somewhere?
Yuktsi I filled your form , but now I want to change my case color, should I submit the form again?yeah please
TX CP - Compact 1800 Full Alu Board
Photo:Show Image(http://i.imgur.com/P2jMnm9.jpg)MoreShow Image(http://i.imgur.com/1yV7b0X.jpg)Show Image(http://i.imgur.com/8HLqM5n.png)Show Image(http://i.imgur.com/DlA2SQ7.jpg)Show Image(http://i.imgur.com/pM1jdmW.jpg)
Price:
- plate (brass) $50 (limited to 5pcs)
TX CP - Compact 1800 Full Alu Board
Photo:Show Image(http://i.imgur.com/P2jMnm9.jpg)MoreShow Image(http://i.imgur.com/1yV7b0X.jpg)Show Image(http://i.imgur.com/8HLqM5n.png)Show Image(http://i.imgur.com/DlA2SQ7.jpg)Show Image(http://i.imgur.com/pM1jdmW.jpg)
Price:
- plate (brass) $50 (limited to 5pcs)
It's a shame you NO longer have the Brass Plate available because that would of been a perfect purchase. Especially an all Gold coloured case with a Brass Plate.
Thanks anyway, Good luck with the GB : ).
Is there a interest check/background thread for this project somewhere?
Yuktsi is bringing this gb over from korea. All the IC and development went over on their forums.
Yuktsi, please cancel my first orderActually, please don't cancel the order. Would like 2 boards. A gold and purp. Thx
Very good decision :thumb:Yuktsi, please cancel my first orderActually, please don't cancel the order. Would like 2 boards. A gold and purp. Thx
yuktsi, I know you are a trust worthy guy but members of this forum are very worried about Kin25's production and execution of this GB. As he has proven to de-prioritize US buyers and/or disappear for 6 months at a time because of his job.
Please elaborate on the timeline and invoicing of this group buy. There are a lot of people that are worried about miscommunication and timeline of this. I dont mean to be rude but we would like to know how kin25 plans to handle this GB. We dont want to wait 6 months to a year for this to happen. Because it appears that TX1800 orders from last year are still to be fulfilled.
Colors: black, grey, silver, red, blue, purple, pink, goldMoreShow Image(http://i.imgur.com/7qTFtOd.jpg?1)
Top leftColors: black, grey, silver, red, blue, purple, pink, goldMoreShow Image(http://i.imgur.com/7qTFtOd.jpg?1)
Do you have a picture of the purple I don't see it in that, only 2 reds a pink and a blue, is one of the red ones a purple?
I don't know which is the second you're calling red, but top left looks purple and upper right looks pink.Bottom left
yuktsi, I know you are a trust worthy guy but members of this forum are very worried about Kin25's production and execution of this GB. As he has proven to de-prioritize US buyers and/or disappear for 6 months at a time because of his job.
Please elaborate on the timeline and invoicing of this group buy. There are a lot of people that are worried about miscommunication and timeline of this. I dont mean to be rude but we would like to know how kin25 plans to handle this GB. We dont want to wait 6 months to a year for this to happen. Because it appears that TX1800 orders from last year are still to be fulfilled.
updated to the main thread :thumb:yuktsi, I know you are a trust worthy guy but members of this forum are very worried about Kin25's production and execution of this GB. As he has proven to de-prioritize US buyers and/or disappear for 6 months at a time because of his job.
Please elaborate on the timeline and invoicing of this group buy. There are a lot of people that are worried about miscommunication and timeline of this. I dont mean to be rude but we would like to know how kin25 plans to handle this GB. We dont want to wait 6 months to a year for this to happen. Because it appears that TX1800 orders from last year are still to be fulfilled.
this
Hey Yuktsi,
Do you have any other sample pictures of the board in different color? Really interested but I am not truly convinced by the gold yet
Colors: black, grey, silver, red, blue, purple, pink, goldMoreShow Image(http://i.imgur.com/7qTFtOd.jpg?1)
Too late for an order?
Sent from my iPhone using Tapatalk
shipping soon. by this Friday?
shipping soon. by this Friday?
7 boards went out today. Redbanshee,breitling, seblove, stoic-lemon, ryptide11 :thumb: :thumb: :thumb:
go see doctor7 boards went out today. Redbanshee,breitling, seblove, stoic-lemon, ryptide11 :thumb: :thumb: :thumb:
http://imgur.com/GPZmTOl
go see doctor7 boards went out today. Redbanshee,breitling, seblove, stoic-lemon, ryptide11 :thumb: :thumb: :thumb:
http://imgur.com/GPZmTOl
Man, I am so mad I missed this! I have a Compact SQ, but really disliked the case.
I have to check this site more often.
My package arrived today. Yay! I don't have space to build it since I am in the process of moving, but thanks to all involved. I thought I had selected the gold plate but when the invoice came through, I assumed I was just a bit too late as there were only a handful available. No biggie. I'm really happy with the purple case.
Edit: Added images as I couldn't resist. One RGB LED seems to be janky. If I hold it down, it will come on, so perhaps a quick pass with the soldering iron will fix it.Show Image(http://i.imgur.com/3gl7KYkm.jpg)
https://imgur.com/gallery/mwoko (https://imgur.com/gallery/mwoko)
Just received mine in Germany delivered by DHL. I am completely struck by everything about this GB.
I can't thank Yuktsi enough for this performance, only GB I can remember that ever delivered that quickly was Round3 by LeandreN.
This is also my first Korean Kustom and I wasn't aware of the obsession that went into these boards. Just looking at the SS plates gave me tingles. Cleanest cutouts I have ever seen. Everything about this keyboard kit feels and looks a brand new expensive car unlike most other kits I've seen so far that looked more like a hobby kit.
Thanks so much for offering this!
does the plate allow for switch top removal ?
Couldn't help it and built my TX-CP yesterday in a single go.
Here's the result, a combination of the two greatest GBs on GH I've been a part of so far:
Here's a link to the IMGUR build log:
http://imgur.com/a/jG7l3 (http://imgur.com/a/jG7l3)
I used vintage Cherry MX Black switches, replaced the springs with 45gr. aftermarket springs and mixed Skidata+ keycaps with some OG Skidata caps for some ISO-DE flavour.
Now that I have finished building this keyboard, I have to say it again: I was not prepared for the passion that went into these kits. The plate/PCB fit had a precision never before seen. The only plate that had nearly as precise cutouts at the ones I got with this kit were the OLKB plates. And their quality SUCKS, switches get stuck in there and actually require a little bit of post processing if you want to use them properly. These plates in contrast had ZERO issues at all and fit the PCB perfectly even over the greater width of a 1800 layout. The switches had such a firm fit in the plate, I cut all the PCB-mount nubs from the Cherry MX Blacks except for the stabilized keys which of course didn't sit tightly in the plate and thus could use the additional guidance by the PCB-mount nubs. I have built ~10 keyboards before and can safely say this one set the standard for me.
Typing on it is just a whole different league as well. I could have never imagined the type feel to be so much better. It almost feels like this keyboard is the center of the universe and I just orbit around it - that's how solid and stable it sits on my desk. Not even the IBM Model F keyboards give me the same sensation of typing on a block of granite.
I don't know how this translates to Korean but: You did it you little nut jobs, showed me that there is a 500$ keyboard worth every penny ... and more!
If you guys like the keyboard, I might take some better pics with better light and a better camera.
Finally had some time to build this!! Gateron tactile clears, lubed and stickered with the transparent films which are awesome by the way. Couple notes: comically heavy and just as solid feeling as my tgr-jane, build quality and finish is perfect, lip looks fantastic in person, and I'm glad I went with the two-tone case. Also, you can retroactively install pcb mounted stabs by desoldering a switch or two and using some sleight of hand beneath the plate - who knew.what a beauty. regretting not getting one
Finally had some time to build this!! Gateron tactile clears, lubed and stickered with the transparent films which are awesome by the way. Couple notes: comically heavy and just as solid feeling as my tgr-jane, build quality and finish is perfect, lip looks fantastic in person, and I'm glad I went with the two-tone case. Also, you can retroactively install pcb mounted stabs by desoldering a switch or two and using some sleight of hand beneath the plate - who knew.
Finally had some time to build this!! Gateron tactile clears, lubed and stickered with the transparent films which are awesome by the way. Couple notes: comically heavy and just as solid feeling as my tgr-jane, build quality and finish is perfect, lip looks fantastic in person, and I'm glad I went with the two-tone case. Also, you can retroactively install pcb mounted stabs by desoldering a switch or two and using some sleight of hand beneath the plate - who knew.
Show Image(http://i.imgur.com/ABaACLP.jpg)
Full album: http://imgur.com/a/L1y2Y
This was one of the highest quality and most enjoyable kits ive ever had the pleasure of assembling. Thank you Yuktsi and kin25!
Full album: http://imgur.com/a/L1y2Y
This was one of the highest quality and most enjoyable kits ive ever had the pleasure of assembling. Thank you Yuktsi and kin25!
1800, 87/84, numpad, compact 1800Full album: http://imgur.com/a/L1y2Y
This was one of the highest quality and most enjoyable kits ive ever had the pleasure of assembling. Thank you Yuktsi and kin25!
That album just convinced me... I need a TX board. I'm totally in for the next GB if I don't dislike the layout.
Edit: Does anyone know what kind of TX boards are out there? Does he have a blog like duck or do I have to navigate through the korean forums to find out more about his stuff?
upcoming: 75%, ergo
Hi Yuktsi, I still haven't received my order on this yet. Any updates?They had some issue with the making of brass plate. Therefore there's some delays. Pmed
I am not sure. But I can check for you. :))upcoming: 75%, ergo
That just grabbed my attention. Will the ergo be split or something like LZ's ergo board? Or, even more important: will they be available to us that are neither able to converse in Korean, nor have a Korean friend that would proxy one of them for us?
Please do so, a split board a'la VE.A is really something that is missing in my collection. Right next to a 65%, maybe I'm lucky with your 910 (fingers crossed).I am not sure. But I can check for you. :))upcoming: 75%, ergo
That just grabbed my attention. Will the ergo be split or something like LZ's ergo board? Or, even more important: will they be available to us that are neither able to converse in Korean, nor have a Korean friend that would proxy one of them for us?
Hi Yuktsi, I still haven't received my order on this yet. Any updates?They had some issue with the making of brass plate. Therefore there's some delays. PmedI am not sure. But I can check for you. :))upcoming: 75%, ergo
That just grabbed my attention. Will the ergo be split or something like LZ's ergo board? Or, even more important: will they be available to us that are neither able to converse in Korean, nor have a Korean friend that would proxy one of them for us?
sadly. no :(Hi Yuktsi, I still haven't received my order on this yet. Any updates?They had some issue with the making of brass plate. Therefore there's some delays. PmedI am not sure. But I can check for you. :))upcoming: 75%, ergo
That just grabbed my attention. Will the ergo be split or something like LZ's ergo board? Or, even more important: will they be available to us that are neither able to converse in Korean, nor have a Korean friend that would proxy one of them for us?
Will there ever be a R2 of the 1800?
Keep drooling over this board... I wish someone would let go one of it and contact me .. LOL
Guys, I have 7 units of silver TX CP. Please fill the link if you are interested. fcfsDamn, if they were grey it would be love. Which plate type and how much shipping to Germany :D ?
https://goo.gl/d4b4b0
Price would be $352, got to be fair to GB participants. Haha. Kin-25 will ship within 24 hours after you paid. Thank you.
No more grey, plate is aluminium. Shipping to europe is $65, US $75, Asia $48.Guys, I have 7 units of silver TX CP. Please fill the link if you are interested. fcfsDamn, if they were grey it would be love. Which plate type and how much shipping to Germany :D ?
https://goo.gl/d4b4b0
Price would be $352, got to be fair to GB participants. Haha. Kin-25 will ship within 24 hours after you paid. Thank you.
No more grey, plate is aluminium. Shipping to europe is $65, US $75, Asia $48.Guys, I have 7 units of silver TX CP. Please fill the link if you are interested. fcfsDamn, if they were grey it would be love. Which plate type and how much shipping to Germany :D ?
https://goo.gl/d4b4b0
Price would be $352, got to be fair to GB participants. Haha. Kin-25 will ship within 24 hours after you paid. Thank you.
Show Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
I don't mind at all. Love the anodizing, love everything about this kit. Thanks for making such nice kbShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
I don't mind at all. Love the anodizing, love everything about this kit. Thanks for making such nice kbShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
Sent from my LG-H961N using Tapatalk
Show Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
waow kin is backShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
Nice oneShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
Nice oneShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N using Tapatalk
Sorry for late shipping.
I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
Sent from my LG-H961N using Tapatalk
Build ur board plsBrass plate will give you the best feeling of typing.
what switches you suggest?QuoteBuild ur board plsBrass plate will give you the best feeling of typing.
what switches you suggest?QuoteBuild ur board plsBrass plate will give you the best feeling of typing.
I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
what switches you suggest?QuoteBuild ur board plsBrass plate will give you the best feeling of typing.
Black!!!!
I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
Oh my god, this looks way too good.
@kin25, how are the chances of the TX87 running again? I usually don't like TKL's, but DAMN that thing is beautiful.
Give me a couple days. I will prepare the form when I am back!I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
Oh my god, this looks way too good.
@kin25, how are the chances of the TX87 running again? I usually don't like TKL's, but DAMN that thing is beautiful.
There are many extra Tx87 and Txpad.Brass plate for tx87 pls. I need them for mine. Hahah
Yuktsi will start GB of them.
There are many extra Tx87 and Txpad.
Yuktsi will start GB of them.
:thumb: :thumb: :thumb:
Big thanks to kin25 and yuktsi for the extras. The packaging was phenomenal.
Can't wait to build them!Show Image(http://i.imgur.com/Yd1wU0R.jpg?1)
Man, that board is so beautiful, we need another round of them!
Hey Yuktsi,
I got the google forms confused between this and the other tx board. If possible, I would like to cancel my silver TX-CP order.
Nice oneShow Image(http://uploads.tapatalk-cdn.com/20161213/64492969c560e75f71c5627a3c83cc79.jpg)
Happy day
Sent from my LG-H961N
Sorry for late shipping.
I love your boards! My first real baord is the purple black tx87 you sold meShow Image(http://uploads.tapatalk-cdn.com/20161213/b066a9a66e0e059cdf266634677f5260.jpg)
Sent from my LG-H961N using Tapatalk
Build ur board pls
Decisions, decisions...who to build first?Cp pls
TX75 in gold with steel plate and TX-CP in silver with aluminum plate. These boards are absolutely gorgeous and weight a ton! Thanks Yuktsi and Kin!Show Image(http://uploads.tapatalk-cdn.com/20161225/8bf8d7406da87a8c92af399c6fc53cd5.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/34c92ac85bf65c3c937e98e07538437a.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/c101c35112ebf63b54ee56d59f9eedd2.jpg)
Decisions, decisions...who to build first?Cp pls
TX75 in gold with steel plate and TX-CP in silver with aluminum plate. These boards are absolutely gorgeous and weight a ton! Thanks Yuktsi and Kin!Show Image(http://uploads.tapatalk-cdn.com/20161225/8bf8d7406da87a8c92af399c6fc53cd5.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/34c92ac85bf65c3c937e98e07538437a.jpg)Show Image(http://uploads.tapatalk-cdn.com/20161225/c101c35112ebf63b54ee56d59f9eedd2.jpg)
Sent from my LG-H961N using Tapatalk
1800 layout isn't really for me since I never use the numpad, but they seriously look so damn good.
Oh for sure, I can definitely see that being the case for the office setting. I just really loved the way they look from when I first saw Leeku's CP-SQ to the TX-CP.1800 layout isn't really for me since I never use the numpad, but they seriously look so damn good.
1800 layout is one of the most convenient layout for office.
I like this layout.
TX-CP with brass plate has crazy feeling. I can't stop my typing! :DAhhhhh I need to build mine soon haha
brass plate is good!
brass plate is good!
What a beauty!
Welcome to GH :)
There's something different about your profile picture :p
What switches are you using with the brass plate?Lubed Vintage Black with 60g custom spring! Maybe linear switch would be best for brass plate.
Any one selling mx vintage blacks?What switches are you using with the brass plate?Lubed Vintage Black with 60g custom spring! Maybe linear switch would be best for brass plate.
Any one selling mx vintage blacks?What switches are you using with the brass plate?Lubed Vintage Black with 60g custom spring! Maybe linear switch would be best for brass plate.
Sent from my SM-G935F using Tapatalk
Hello.
There are two extra txcp.
Blue 1, purple 1.
Plz contact with me by telegram.
At first you have to download telegram application and setup.
And find @kin25 or click https://telegram.me/kin25
Then you can talk with me.
Hello.
There are two extra txcp.
Blue 1, purple 1.
Plz contact with me by telegram.
At first you have to download telegram application and setup.
And find @kin25 or click https://telegram.me/kin25
Then you can talk with me.
Are either of these still available?
Are either of these still available?You can choose one of these.
What's the price on board #1?Are either of these still available?You can choose one of these.
1. Blue top, silver bottom, alu plate, ss weight bar
2. Blue top, gold bottom, alu plate, ss weight bar
3. Pink top, pink bottom, alu plate, ss weight bar
4. Purple top, purple bottom, alu plate, ss weight bar
What's the price on board #1?Are either of these still available?You can choose one of these.
1. Blue top, silver bottom, alu plate, ss weight bar
2. Blue top, gold bottom, alu plate, ss weight bar
3. Pink top, pink bottom, alu plate, ss weight bar
4. Purple top, purple bottom, alu plate, ss weight bar
Sent from my Pixel XL using Tapatalk
Is there a way to have the in-switch capslock and numlock LED as always on/off (instead of acting as indicator LED)?
Show Image(https://uploads.tapatalk-cdn.com/20170112/826c2b65173015d98e29bd9ea2254956.jpg)
Finally got my build completed. I'm super happy with how this board turned out. 78g Zealios and JTK pink on black caps.Show Image(https://uploads.tapatalk-cdn.com/20170126/be7e03cee1fb5ee28a83066e04e54b02.jpg)
Finally got my build completed. I'm super happy with how this board turned out. 78g Zealios and JTK pink on black caps.Show Image(https://uploads.tapatalk-cdn.com/20170126/be7e03cee1fb5ee28a83066e04e54b02.jpg)
Anymore of these boards available or anyone have one for sale?
Anymore of these boards available or anyone have one for sale?
Get on the Telegram messaging program/app and ask kin25. If he has anything left, he'll let you see what options are available and sell direct to you. He's very reliable, I picked up a few kits from him via Telegram.
Edit: Oops, didn't notice you're the same person I told on /r/mk.
To get money to pursue their new endgame, probably.Anymore of these boards available or anyone have one for sale?
Get on the Telegram messaging program/app and ask kin25. If he has anything left, he'll let you see what options are available and sell direct to you. He's very reliable, I picked up a few kits from him via Telegram.
Edit: Oops, didn't notice you're the same person I told on /r/mk.
Also saw 2 for sale recently on mech market. One of them had a polycarbonate bottom too, pretty sweet, although I couldn't tell you why someone would sell one of these after typing on it.
To get money to pursue their new endgame, probably.Anymore of these boards available or anyone have one for sale?
Get on the Telegram messaging program/app and ask kin25. If he has anything left, he'll let you see what options are available and sell direct to you. He's very reliable, I picked up a few kits from him via Telegram.
Edit: Oops, didn't notice you're the same person I told on /r/mk.
Also saw 2 for sale recently on mech market. One of them had a polycarbonate bottom too, pretty sweet, although I couldn't tell you why someone would sell one of these after typing on it.
TX1800v2 sample pictures → http://txseries.tistory.com/52
TX1800v2 sample pictures → http://txseries.tistory.com/52
What's the difference from v1? Cosmetic? Or did the pcb design also changed?
TX1800v2 sample pictures → http://txseries.tistory.com/52
What's the difference from v1? Cosmetic? Or did the pcb design also changed?
Still using Leeku MX 1800 if I'm not wrong. I spot a couple of differences around the indicator lights, as well as acrylic diffuser
TX1800v2 sample pictures → http://txseries.tistory.com/52
What's the difference from v1? Cosmetic? Or did the pcb design also changed?
Still using Leeku MX 1800 if I'm not wrong. I spot a couple of differences around the indicator lights, as well as acrylic diffuser
That's good to know. I hope that the timing is right. I really need something nice to house my tx1800s.
Differences of tx1800 and v2Sounds excellent!
1) leeku1800 pcb presoldered electronic components
(Diodes, resistors and so on)
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
4) NCS locks letter holes for leds.
5) 3T brass weight bar.
6) assembling service.
7) a little gift and free service. ??
Differences of tx1800 and v2
1) leeku1800 pcb presoldered electronic components
(Diodes, resistors and so on)
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
4) NCS locks letter holes for leds.
5) 3T brass weight bar.
6) assembling service.
7) a little gift and free service. ??
Differences of tx1800 and v2
1) leeku1800 pcb presoldered electronic components
(Diodes, resistors and so on)
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
4) NCS locks letter holes for leds.
5) 3T brass weight bar.
6) assembling service.
7) a little gift and free service. ??
yess~ please offer the gold color once again!! :-*
Differences of tx1800 and v2
1) leeku1800 pcb presoldered electronic components
(Diodes, resistors and so on)
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
4) NCS locks letter holes for leds.
5) 3T brass weight bar.
6) assembling service.
7) a little gift and free service. ??
yess~ please offer the gold color once again!! :-*
There was never a gold color with 1800. only with CP
Differences of tx1800 and v2
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
7) a little gift and free service. ??
Differences of tx1800 and v2
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
7) a little gift and free service. ??
The V1 also had a diffuser? Was it optional, hence the thicker bottom?
Time for some brass, I guess. There's no escape.Show Image(http://www.themoviescene.co.uk/reviews/_img/2915-3.jpg)
I like gifts. :)
Differences of tx1800 and v2
1) leeku1800 pcb presoldered electronic components
(Diodes, resistors and so on)
2) because of acrylic deffuser, bottom is thinner.
3) only brass plate (ansi/iso/both)
4) NCS locks letter holes for leds.
5) 3T brass weight bar.
6) assembling service.
7) a little gift and free service. ??
yess~ please offer the gold color once again!! :-*
There was never a gold color with 1800. only with CP
Noted, then I humbly request that the gold color that was offered for TX-CP also be offered for TX1800v2
Please also provide Alu switch plate and STS weight plate for TX1800v2. I know many ppl want brass plates as it is good for linear switches and feel much premier, in the other hand may some ppl like me would like simply and down to earth design.
Furthermore, does the v2 could be assembled without diffuser layer?
Hi Kin25! I have a question about the TX-CP colors. Do you have any pictures of the various color options? I would like to place an order but don't want to guess what thy may look like. Thanks
Hi Kin25! I have a question about the TX-CP colors. Do you have any pictures of the various color options? I would like to place an order but don't want to guess what thy may look like. Thanks
When I receive them.. I will post pics..
Hi Kin25! I have a question about the TX-CP colors. Do you have any pictures of the various color options? I would like to place an order but don't want to guess what thy may look like. Thanks
When I receive them.. I will post pics..
Are you still taking orders for tx-1800?
https://geekhack.org/index.php?topic=86076.0;topicseen
I'm only 1+ years late. I would love to order one of these. If you have any extra kits, please PM me :D
I'm only 1+ years late. I would love to order one of these. If you have any extra kits, please PM me :D
Same here. This is my endgame. Looking to purchase a kit though not an assembled unit.
Sent from my iPad using Tapatalk
I'm only 1+ years late. I would love to order one of these. If you have any extra kits, please PM me :D
Same here. This is my endgame. Looking to purchase a kit though not an assembled unit.
Sent from my iPad using Tapatalk
Has the TX-CP round 2 already been concluded?
I hope I didn't miss out!
Bah! I hope he does another release in the near future...
For a 2nd or 3rd time, just mentioning I would love to purchase an extra kit if one is available. Please let me know. My paypal is itching for some use.
Managed to snag an extra from Kin, originally was going for the black but my head was turned by this...Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
Managed to snag an extra from Kin, originally was going for the black but my head was turned by this...You don't need two do ya? ;)Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
Or Iron ManManaged to snag an extra from Kin, originally was going for the black but my head was turned by this...You don't need two do ya? ;)Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
Reminds me of Chinese New Year. I usually go for gray, black, silver but I would cheat on those colors for this...
Sent from my iPhone using Tapatalk
@kin25
Any idea when the grey remakes are going to be finished? Thanks!
I tried my friends tx-cp and fell in love with the layout and quality. I'm hoping to get one as my main keyboard. Do you know what is the best way to contact kin to ask about extras?
Sent from my SM-G955U using Tapatalk
Managed to snag an extra from Kin, originally was going for the black but my head was turned by this...Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
miss the last sale. any updates when will the next sale be?Managed to snag an extra from Kin, originally was going for the black but my head was turned by this...Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
DEMMM, that's SO BEAUTIFUL!
Thank you for the info. I'll signing up.miss the last sale. any updates when will the next sale be?Managed to snag an extra from Kin, originally was going for the black but my head was turned by this...Show Image(http://i.imgur.com/cniBDmd.jpg)
Boy is it something, packaging, finish, weight, it's a gorgeous object, camera loves it ;DShow Image(http://i.imgur.com/WBjZgWU.jpg)Show Image(http://i.imgur.com/7Ptdd64.jpg)Show Image(http://i.imgur.com/P1QIfgc.jpg)
DEMMM, that's SO BEAUTIFUL!
Still yet to build! Struggling to find the right keyset, red samurai would be perfect but looks a long way away :(
As a note to those looking for extras I was notified through the TX website mailing list, so definately worth signing up for that..
Still yet to build! Struggling to find the right keyset, red samurai would be perfect but looks a long way away :(
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
I have a R1 TX-CP and I'd like a bag that was offered with the R2 TX-CP, can I message Kin on telegram for one possibly? Also, any ideas on TX-87 extras timeline?
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
I have a R1 TX-CP and I'd like a bag that was offered with the R2 TX-CP, can I message Kin on telegram for one possibly? Also, any ideas on TX-87 extras timeline?
just message kin on telegram and ask him directly
tx87/4 you'll have to wait for another round methinks, he hasn't had extras for a while
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
I have a R1 TX-CP and I'd like a bag that was offered with the R2 TX-CP, can I message Kin on telegram for one possibly? Also, any ideas on TX-87 extras timeline?
just message kin on telegram and ask him directly
tx87/4 you'll have to wait for another round methinks, he hasn't had extras for a while
I've done that multiple times with no reply.
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
I have a R1 TX-CP and I'd like a bag that was offered with the R2 TX-CP, can I message Kin on telegram for one possibly? Also, any ideas on TX-87 extras timeline?
just message kin on telegram and ask him directly
tx87/4 you'll have to wait for another round methinks, he hasn't had extras for a while
I've done that multiple times with no reply.
Not sure when you tried reaching out but kin was on holiday/vacation until the 11th so if you tried contacting him between the beginning of the month and then he wouldn't have responded.
Extras should be available AFTER all orders are fulfilled. Currently, I believe Titan Grey orders are still pending.
Also, txkeyboards.com is up and running again. You guys can go and submit support ticket now.
Regarding the last few pending orders, last time I checked with kin (around 1-2 weeks ago) he said they should be available for dispatch in mid-Oct or late-Oct. I believe it’s currently full moon festival in Korea so you guys may not get an answer until the end of next week.
I’d appreciate any feedbacks/errors of the website. Thank you.
I have a R1 TX-CP and I'd like a bag that was offered with the R2 TX-CP, can I message Kin on telegram for one possibly? Also, any ideas on TX-87 extras timeline?
just message kin on telegram and ask him directly
tx87/4 you'll have to wait for another round methinks, he hasn't had extras for a while
I've done that multiple times with no reply.
Not sure when you tried reaching out but kin was on holiday/vacation until the 11th so if you tried contacting him between the beginning of the month and then he wouldn't have responded.
It was on the 14th.
I think kin and I talked briefly about this about a month ago. He said he might have some in stock after he’s done w TXCP/1800 GBs.
It was on the 14th.
I think kin and I talked briefly about this about a month ago. He said he might have some in stock after he’s done w TXCP/1800 GBs.
======••••======
http://txkeyboards.com/
It was on the 14th.
I think kin and I talked briefly about this about a month ago. He said he might have some in stock after he’s done w TXCP/1800 GBs.
======••••======
http://txkeyboards.com/
I've signed up for the newsletter, but I have no idea if I'm signed up since it just refreshes the page when I filled out the form and hit enter. Also, the newsletter form is gone now. I'm guessing by the time I hear about extras being on sale or I wander back to geekhack, they'll be gone so I'm not getting my hopes up.
I'll proxy some stuff if I can get a hold of kin also. I'm looking for a spare tx-cp plate, a bag and a few boards as well.
I sent all preorder of R2.
I sent all preorder of R2.
Sorry but is this still available for purchase? It seems I am still able to fill out the order form, but I'm not sure if it's just residual from past group buys. When I select brass plate would it replace my steel plate or just be added as an extra? Also, does this ship to Canada? Thanks!!!
I'm having a issue with my TX-CP PCB and was wondering if someone here can help me. Basically I soldered the switches and notification LEDS, updated the firmware to the current version (170419) , created my keymap and LED options in JigOn and all was well for about a month. Now when I try and use my TX-CP I get the RGB backlighting going in a pattern back and forth and I cannot turn them off or even connect to JigOn again. I had the LED's all colored black so I would not have to see them, the option in JigOn to turn off the backlights never worked for me. I think it might be a short because I saw this same behavior with the RGB back lighting on my TX-87 board but I cannot be sure because i see no shorts or anything else wrong with the PCB. Here is the really strange part. Key keymaps works fine. All my keys are there and everything under my Fn layers are there. I have tried multiple computers and multiple cables and the outcome is the same.
My keymap works fine
I cannot connect to JigOn to reconfigure
I cannot disable the RGB backlighting
I have used multiple computers and cables without luck
Nothing has changed
This is driving me nuts, the fact it used to work and now does not and I cannot see anything wrong with the PCB. I have pics of my PCB if you want me to post them just let me know, thanks in advance all.
Are there any of these left over by any chance?
It looks like my good old Compact SQ has kicked the bucket so I am looking for a replacement.
Alternatively, PM me if you want to part with the CP-SQ.
Alternatively, PM me if you want to part with the CP-SQ.
It still works as a keyboard. It is just that only RGB lights 1-4 still work, and I have to reapply the jigon profile every reboot/plugin.
Maybe after I get a replacement.
Alternatively, PM me if you want to part with the CP-SQ.
It still works as a keyboard. It is just that only RGB lights 1-4 still work, and I have to reapply the jigon profile every reboot/plugin.
Maybe after I get a replacement.
Try to reflow the solder on the RGB pads. My TX-87 was also doing the same thing with having to reapply the profile when plugged in. I update the firmware and made sure the JiGon version and firmware version were the same and no more problem.
you can do it on older versions of jigon if you set all the LEDs to blackAlternatively, PM me if you want to part with the CP-SQ.
It still works as a keyboard. It is just that only RGB lights 1-4 still work, and I have to reapply the jigon profile every reboot/plugin.
Maybe after I get a replacement.
Try to reflow the solder on the RGB pads. My TX-87 was also doing the same thing with having to reapply the profile when plugged in. I update the firmware and made sure the JiGon version and firmware version were the same and no more problem.
Yup definitely make sure you upgrade to the latest firmware. Also in the latest one, you can turn off the rgb completely if it’s annoying you.
you can do it on older versions of jigon if you set all the LEDs to blackAlternatively, PM me if you want to part with the CP-SQ.
It still works as a keyboard. It is just that only RGB lights 1-4 still work, and I have to reapply the jigon profile every reboot/plugin.
Maybe after I get a replacement.
Try to reflow the solder on the RGB pads. My TX-87 was also doing the same thing with having to reapply the profile when plugged in. I update the firmware and made sure the JiGon version and firmware version were the same and no more problem.
Yup definitely make sure you upgrade to the latest firmware. Also in the latest one, you can turn off the rgb completely if it’s annoying you.
Try to reflow the solder on the RGB pads. My TX-87 was also doing the same thing with having to reapply the profile when plugged in. I update the firmware and made sure the JiGon version and firmware version were the same and no more problem.
TXCP with Round 6 Cadet :p
TXCP with Round 6 Cadet :p
Goood!
Dark grey?
Beautiful!TXCP with Round 6 Cadet :p
Goood!
Dark grey?
Oh yeah, the keyboard is pure class, a masterpiece of design. I've never ever seen something so elegant. I can't even describe how good the anodisation is. Kin you rock. I'm still not sure about this combination. I might try GMK Dolch later.
TXCP with Round 6 Cadet :p
Goood!
Dark grey?
Oh yeah titanium (dark) grey. The keyboard is pure class, a masterpiece of design. I've never ever seen something so elegant. I can't even describe how good the anodisation is. Kin you rock. I'm still not sure about this combination. I might try GMK Dolch later.
Beautiful!TXCP with Round 6 Cadet :p
Goood!
Dark grey?
Oh yeah, the keyboard is pure class, a masterpiece of design. I've never ever seen something so elegant. I can't even describe how good the anodisation is. Kin you rock. I'm still not sure about this combination. I might try GMK Dolch later.
Kin does amazing work!
TXCP with Round 6 Cadet :p
Goood!
Dark grey?
Oh yeah titanium (dark) grey. The keyboard is pure class, a masterpiece of design. I've never ever seen something so elegant. I can't even describe how good the anodisation is. Kin you rock. I'm still not sure about this combination. I might try GMK Dolch later.
TXCP with Round 6 Cadet :p
TXCP with Round 6 Cadet :p
I wish I could get my hands on a titanium grey TX-CP.
Happy new year~~~Happy new year Kin!
Tactile grey + yuri. Heavy board, very pleased with it, in this case you definitely get what you pay for..Show Image(https://i.imgur.com/Ldk3rUb.jpg)Show Image(https://i.imgur.com/F3k4WyI.jpg)
Tactile grey + yuri. Heavy board, very pleased with it, in this case you definitely get what you pay for..I love this combination. This is really beautifull.Show Image(https://i.imgur.com/Ldk3rUb.jpg)Show Image(https://i.imgur.com/F3k4WyI.jpg)
Tactile grey + yuri. Heavy board, very pleased with it, in this case you definitely get what you pay for..Show Image(https://i.imgur.com/Ldk3rUb.jpg)Show Image(https://i.imgur.com/F3k4WyI.jpg)
My PCB decided to go haywire on me... No longer working, only LED is working. Connected the USB while holding U causing the board to activate multiple keys at once and I can't stop it. Reflashing firmware doesn't do anything either.
Does anyone have a spare PCB I could buy from? I have no spare keyboard to use at the moment...
My PCB decided to go haywire on me... No longer working, only LED is working. Connected the USB while holding U causing the board to activate multiple keys at once and I can't stop it. Reflashing firmware doesn't do anything either.
Does anyone have a spare PCB I could buy from? I have no spare keyboard to use at the moment...
My Silver TX-CP with SA Godspeed and FTTM Flag artisan.
(Attachment Link) (Attachment Link) (Attachment Link)
Finally built mine, this board is some next level ****, seriously good. Built with vintage blacks and 9009.Show Image(https://i.imgur.com/NboNFZI.jpg)
Finally built mine, this board is some next level ****, seriously good. Built with vintage blacks and 9009.Show Image(https://i.imgur.com/NboNFZI.jpg)
Hi there, I am wondering whether your team can still accept one more order for this keyboard now?
Hey all, wondering if anyone can help, or point me to a solution. I got my TX-CP built and flashed the L3_171209 firmware.
When using Jigon_170419, I can't seem to save any key changes. My LED Sleep Time setting updates fine for instance, but the home keys above the numpad are stuck at default: Ins/Del, Home/End, PgUp/PgDn, NumLock/Keypad Minus. I've tried updating the layout to move the Numlock/minus around, but nothing saves, even making those rows: Pause/NumLock, Ins/Del, Home/End, PgUp/PgDwn doesn't work.
Those are really the only keys I want to change. What's odd is that when I go check in my Key checker nothing has changed, but if I connect again with JiGon everything is setup correctly.
Also the Numlock key toggles the LED on the Del key as well as the LED indicator, shouldn't that move to wherever the Numpad is now?
TX-CP CarblivionShow Image(https://i.imgur.com/LxPLnho.jpg)
Now I forget how to turn off LED's
Edit: ah got it, used JigOn to set LED effect Preset 0 to Off, then FN-F1 is preset 0, FN-F2 is preset 1 (mines Always On) :cool:
Tx white keyboards
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Are the white boards MAO or something like cerakote? Looking at jumping in this now.
The order form is still open - is this still an ongoing GB?
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
Thanks! Sorry about that.The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
The ETA's right on the form
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
The ETA's right on the form
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
The ETA's right on the form
Sorry, i see a date on the form link from 2016, but no date when i open the form.
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
The ETA's right on the form
Sorry, i see a date on the form link from 2016, but no date when i open the form.
You aren't looking at the fight form:
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
The order form is still open - is this still an ongoing GB?
Until the 28th I believe.
Awesome. If I order now, is there any estimate for shipping? Sorry if im missing a post, tried to backtrack.
The ETA's right on the form
Sorry, i see a date on the form link from 2016, but no date when i open the form.
You aren't looking at the fight form:
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Sorry i wasn't looking for the white painted boards. The original form link is still open, and i was wondering if they're still taking orders and if so, when they would probably ship. I'm guessing even if i submitted the form, it wouldn't lead to anything?
weird, it's still allowing me to submit a response. Thanks for letting me know.
Anybody got invoiced yet? A few have over the TX60 and TX84 thread... I havent got mine yet...
Since these are being sold under new finishes, would it be possible to order just a PCB? I need a new one.
Can we get an update on these? I know domestic Korean got theirs already, when will the international shipment start?
This might be a complete long shot, but if anyone happens to have made/recreated a plate file for the TX-CP would love to get ahold of it. Afaik no TX board has public plate files, but figured it was worth asking here before paying someone to laser scan it. TIA!
This might be a complete long shot, but if anyone happens to have made/recreated a plate file for the TX-CP would love to get ahold of it. Afaik no TX board has public plate files, but figured it was worth asking here before paying someone to laser scan it. TIA!
Haven't seen anything for the TX-CP version, but the files were released for the full case of the compact SQ. They can be found in the Compact SQ thread, halfway down page 17 (sorry, unsure of how to link a single comment):
https://geekhack.org/index.php?topic=76617.800
I haven't printed the entire thing, but recently printed the plate and used it to rebuild an old Compact SQ with the suo L3 usb-c board.
Here is an album with some pictures of it:
https://imgur.com/a/FW8OBe9 (https://imgur.com/a/FW8OBe9)
This might be a complete long shot, but if anyone happens to have made/recreated a plate file for the TX-CP would love to get ahold of it. Afaik no TX board has public plate files, but figured it was worth asking here before paying someone to laser scan it. TIA!
Haven't seen anything for the TX-CP version, but the files were released for the full case of the compact SQ. They can be found in the Compact SQ thread, halfway down page 17 (sorry, unsure of how to link a single comment):
https://geekhack.org/index.php?topic=76617.800
I haven't printed the entire thing, but recently printed the plate and used it to rebuild an old Compact SQ with the suo L3 usb-c board.
Here is an album with some pictures of it:
https://imgur.com/a/FW8OBe9 (https://imgur.com/a/FW8OBe9)
Where did you get this PCB? I'd like to buy one for my TXCP
looks like some of the mounting holes are in slightly different places on the TXCP plate compared to the SQ version
This might be a complete long shot, but if anyone happens to have made/recreated a plate file for the TX-CP would love to get ahold of it. Afaik no TX board has public plate files, but figured it was worth asking here before paying someone to laser scan it. TIA!
Haven't seen anything for the TX-CP version, but the files were released for the full case of the compact SQ. They can be found in the Compact SQ thread, halfway down page 17 (sorry, unsure of how to link a single comment):
https://geekhack.org/index.php?topic=76617.800
I haven't printed the entire thing, but recently printed the plate and used it to rebuild an old Compact SQ with the suo L3 usb-c board.
Here is an album with some pictures of it:
https://imgur.com/a/FW8OBe9 (https://imgur.com/a/FW8OBe9)
This might be a complete long shot, but if anyone happens to have made/recreated a plate file for the TX-CP would love to get ahold of it. Afaik no TX board has public plate files, but figured it was worth asking here before paying someone to laser scan it. TIA!
Haven't seen anything for the TX-CP version, but the files were released for the full case of the compact SQ. They can be found in the Compact SQ thread, halfway down page 17 (sorry, unsure of how to link a single comment):
https://geekhack.org/index.php?topic=76617.800
I haven't printed the entire thing, but recently printed the plate and used it to rebuild an old Compact SQ with the suo L3 usb-c board.
Here is an album with some pictures of it:
https://imgur.com/a/FW8OBe9 (https://imgur.com/a/FW8OBe9)