« previous next »
Pages:  [1]     Go Down

Author Topic: [IC] IBM model F metal case powdercoating -- custom colors!  (Read 2682 times)

0 Members and 1 Guest are viewing this topic.

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
[IC] IBM model F metal case powdercoating -- custom colors!
« on: Fri, 13 June 2014, 14:34:04 »
CptBadAss and I have been talking to rainbow about powdercoating AT-F, XT-F, 122s and kishsaver cases. Basically any metal IBM case. They have been super cool about it and will blast then paint every case in a different color if we want. Cost is going to hover around 100$ per case (top and bottom). Logistics will be as follows:

You purchase the powdercoating service on geekhackers.org, specifying the color you want at order time. You can choose from the colors we have in our box, or most RAL color codes (these are stocked at rainbow)
You take apart your keyboard and ship me the case
I label every case with the color requested
I ship the labeled batch to Rainbow and I pay them (I will cover this shipping)
They blast, paint and ship the batch back to me (I will cover this shipping)
I ship your case back to you (You will cover most of this shipping -- whatever geekhackers charges you, which is usually slightly under actual cost for heavy items)

what is cool about this:

model Fs in whatever freaking color you want
DID YOU HEAR ME??@!?!? WHAT MORE DO YOU WANT?!?!
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #1 on: Fri, 13 June 2014, 14:52:13 »
Interesting....would be a good addition to my soon to come f122
Logged

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #2 on: Fri, 13 June 2014, 14:52:45 »
FYI, F-122 housing is plastic except for the back...
Logged
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam
"When I was a kid, I used to take things apart and never put them back together."

Offline HPE1000

  • Keycap Paparazzo
  • Posts: 2943
  • Location: Carolina Beach, NC
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #3 on: Fri, 13 June 2014, 14:53:24 »
XT-F are all metal?
Logged

Offline intelli78

  • Posts: 1503
  • Location: Seattle
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #4 on: Fri, 13 June 2014, 14:55:40 »
Does it have to be an IBM? I have some other aluminum cases that I might want to powder coat.
Logged
Please consider carefully before you decide to comment, for Jesus.

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #5 on: Fri, 13 June 2014, 15:03:29 »
my XT-F is all metal

the other cases will depend entirely on whether they can be hung. we know IBMs can be hung on a powder rack, so i'd prefer to keep it to those. also, blasting steel is entirely different from blasting aluminum.

actually, scratch aluminum entirely. this is for steel powdercoating.
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline intelli78

  • Posts: 1503
  • Location: Seattle
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #6 on: Fri, 13 June 2014, 15:04:38 »
OK, thanks.
Logged
Please consider carefully before you decide to comment, for Jesus.

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #7 on: Fri, 13 June 2014, 15:09:45 »
Quote from: jdcarpe on Fri, 13 June 2014, 14:52:45
FYI, F-122 housing is plastic except for the back...

A blue back would still look good.
Logged

Offline Pacifist

  • Report me *again* if there are gifs in my sig
  • * Elevated Elder
  • Posts: 3599
  • Location: Cali
  • on hiatus
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #8 on: Fri, 13 June 2014, 15:10:33 »
Quote from: mkawa on Fri, 13 June 2014, 15:03:29
my XT-F is all metal

the other cases will depend entirely on whether they can be hung. we know IBMs can be hung on a powder rack, so i'd prefer to keep it to those. also, blasting steel is entirely different from blasting aluminum.

actually, scratch aluminum entirely. this is for steel powdercoating.

What's the pn of your xt? I've had 4 xt's before and none had metal tops, would like to see which one yours is
Logged

Offline mkawa

  •  No Marketplace Access
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
Re: [IC] IBM model F metal case powdercoating -- custom colors!
« Reply #9 on: Fri, 13 June 2014, 15:34:49 »
doesn't look like there's enough interest to make a dent in costs, honestly. rainbow is always happy to do one-offs. contact me if you need contact information for them
Logged

to all the brilliant friends who have left us, and all the students who climb on their shoulders.
Pages:  [1]     Go Up
« previous next »